Ender3 - Marlin 2.1.2.4 build (#16)

2024-10-10 01:45:01 +02:00
parent 36f7ac4197
commit 229bde3d18
2868 changed files with 1663193 additions and 0 deletions
--- a/creality-ender3/Marlin-2.1.2.4/Marlin/src/pins/gd32f1/env_validate.h
+++ b/creality-ender3/Marlin-2.1.2.4/Marlin/src/pins/gd32f1/env_validate.h
@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef ENV_VALIDATE_H
+#define ENV_VALIDATE_H
+
+#if NOT_TARGET(__STM32F1__, STM32F1)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+#endif
--- a/creality-ender3/Marlin-2.1.2.4/Marlin/src/pins/gd32f1/pins_SOVOL_V131.h
+++ b/creality-ender3/Marlin-2.1.2.4/Marlin/src/pins/gd32f1/pins_SOVOL_V131.h
@@ -0,0 +1,76 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Sovol 1.3.1 (GD32F103RET6) board pin assignments
+ */
+
+#include "env_validate.h"
+
+#if HAS_MULTI_HOTEND || E_STEPPERS > 1
+  #error "SOVOL V131 only supports 1 hotend / E-stepper."
+  #define E_ERROR 1
+#endif
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME      "Sovol V131"
+#endif
+#ifndef DEFAULT_MACHINE_NAME
+  #define DEFAULT_MACHINE_NAME "Sovol SV06"
+#endif
+
+#include "../stm32f1/pins_CREALITY_V4.h"
+
+#if HAS_TMC_UART
+
+  /**
+   * TMC2208/TMC2209 stepper drivers
+   *
+   * Hardware serial communication ports.
+   * If undefined software serial is used according to the pins below
+   */
+
+  #define X_SERIAL_TX_PIN                   PC1
+  #define X_SERIAL_RX_PIN                   PC1
+
+  #define Y_SERIAL_TX_PIN                   PC0
+  #define Y_SERIAL_RX_PIN                   PC0
+
+  #define Z_SERIAL_TX_PIN                   PA15
+  #define Z_SERIAL_RX_PIN                   PA15
+
+  #define E0_SERIAL_TX_PIN                  PC14
+  #define E0_SERIAL_RX_PIN                  PC14
+
+  // Reduce baud rate to improve software serial reliability
+  #ifndef TMC_BAUD_RATE
+    #define TMC_BAUD_RATE                  19200
+  #endif
+
+#endif // HAS_TMC_UART
+
+//
+// SD Card
+//
+#define ONBOARD_SPI_DEVICE                     1
+#define ONBOARD_SD_CS_PIN                   PA4   // SDSS