Ender3 - Marlin 2.1.2.4 build (#16)
This commit was merged in pull request #16.
This commit is contained in:
@@ -0,0 +1,247 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Einsy-Retro pin assignments
|
||||
* Schematic (1.0b): https://green-candy.osdn.jp/external/MarlinFW/board_schematics/Einsy-Retro/Schematic%20Prints_EinsyRetro_1.0b.PDF
|
||||
* Origin (1.0b): https://github.com/ultimachine/EinsyRetro/blob/master/board/Project%20Outputs/Schematic%20Prints_EinsyRetro_1.0b.PDF
|
||||
* Schematic (1.0c): https://green-candy.osdn.jp/external/MarlinFW/board_schematics/Einsy-Retro/Schematic%20Prints_EinsyRetro_1.0c.PDF
|
||||
* Origin (1.0c): https://github.com/ultimachine/EinsyRetro/blob/master/board/Project%20Outputs/Schematic%20Prints_EinsyRetro_1.0c.PDF
|
||||
*/
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#define BOARD_INFO_NAME "Einsy Retro"
|
||||
|
||||
//
|
||||
// TMC2130 Configuration_adv defaults for EinsyRetro
|
||||
//
|
||||
#if !AXIS_DRIVER_TYPE_X(TMC2130) || !AXIS_DRIVER_TYPE_Y(TMC2130) || !AXIS_DRIVER_TYPE_Z(TMC2130) || !AXIS_DRIVER_TYPE_E0(TMC2130)
|
||||
#error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRetro."
|
||||
#endif
|
||||
|
||||
// TMC2130 Diag Pins
|
||||
#define X_DIAG_PIN 64
|
||||
#define Y_DIAG_PIN 69
|
||||
#define Z_DIAG_PIN 68
|
||||
#define E0_DIAG_PIN 65
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
// Only use Diag Pins when SENSORLESS_HOMING is enabled for the TMC2130 drivers.
|
||||
// Otherwise use a physical endstop based configuration.
|
||||
//
|
||||
// SERVO0_PIN and Z_MIN_PIN configuration for BLTOUCH sensor when combined with SENSORLESS_HOMING.
|
||||
//
|
||||
|
||||
#if DISABLED(SENSORLESS_HOMING)
|
||||
|
||||
#define X_MIN_PIN 12 // X-
|
||||
#define Y_MIN_PIN 11 // Y-
|
||||
#define X_MAX_PIN 81 // X+
|
||||
#define Y_MAX_PIN 57 // Y+
|
||||
|
||||
#else
|
||||
|
||||
#if X_HOME_TO_MIN
|
||||
#define X_MIN_PIN X_DIAG_PIN
|
||||
#define X_MAX_PIN 81 // X+
|
||||
#else
|
||||
#define X_MIN_PIN 12 // X-
|
||||
#define X_MAX_PIN X_DIAG_PIN
|
||||
#endif
|
||||
|
||||
#if Y_HOME_TO_MIN
|
||||
#define Y_MIN_PIN Y_DIAG_PIN
|
||||
#define Y_MAX_PIN 57 // Y+
|
||||
#else
|
||||
#define Y_MIN_PIN 11 // Y-
|
||||
#define Y_MAX_PIN Y_DIAG_PIN
|
||||
#endif
|
||||
|
||||
#if ENABLED(BLTOUCH)
|
||||
#define Z_MIN_PIN 11 // Y-
|
||||
#define SERVO0_PIN 10 // Z-
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#define Z_MAX_PIN 7
|
||||
#ifndef Z_MIN_PIN
|
||||
#define Z_MIN_PIN 10 // Z-
|
||||
#endif
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN 10
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 37
|
||||
#define X_DIR_PIN 49
|
||||
#define X_ENABLE_PIN 29
|
||||
#define X_CS_PIN 41
|
||||
|
||||
#define Y_STEP_PIN 36
|
||||
#define Y_DIR_PIN 48
|
||||
#define Y_ENABLE_PIN 28
|
||||
#define Y_CS_PIN 39
|
||||
|
||||
#define Z_STEP_PIN 35
|
||||
#define Z_DIR_PIN 47
|
||||
#define Z_ENABLE_PIN 27
|
||||
#define Z_CS_PIN 67
|
||||
|
||||
#define E0_STEP_PIN 34
|
||||
#define E0_DIR_PIN 43
|
||||
#define E0_ENABLE_PIN 26
|
||||
#define E0_CS_PIN 66
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 0 // Analog Input
|
||||
#define TEMP_1_PIN 1 // Analog Input
|
||||
#define TEMP_BED_PIN 2 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 3
|
||||
#define HEATER_BED_PIN 4
|
||||
|
||||
#ifndef FAN0_PIN
|
||||
#define FAN0_PIN 8
|
||||
#endif
|
||||
#define FAN1_PIN 6
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
|
||||
#ifndef CASE_LIGHT_PIN
|
||||
#define CASE_LIGHT_PIN 9
|
||||
#endif
|
||||
|
||||
//
|
||||
// M3/M4/M5 - Spindle/Laser Control
|
||||
//
|
||||
#if HAS_CUTTER
|
||||
// Use P1 connector for spindle pins
|
||||
#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
|
||||
#define SPINDLE_LASER_ENA_PIN 18 // Pullup!
|
||||
#define SPINDLE_DIR_PIN 19
|
||||
#endif
|
||||
|
||||
//
|
||||
// Průša i3 MK2 Multiplexer Support
|
||||
//
|
||||
#if HAS_PRUSA_MMU1
|
||||
#define E_MUX0_PIN 17
|
||||
#define E_MUX1_PIN 16
|
||||
#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78
|
||||
#endif
|
||||
|
||||
//
|
||||
// EXP Headers
|
||||
//
|
||||
#define EXP1_01_PIN 84 // PH2
|
||||
#define EXP1_02_PIN 9 // PH6
|
||||
#define EXP1_03_PIN 18 // TX1
|
||||
#define EXP1_04_PIN 82 // PD5
|
||||
#define EXP1_05_PIN 19 // RX1
|
||||
#define EXP1_06_PIN 70 // PG4
|
||||
#define EXP1_07_PIN 85 // PH7
|
||||
#define EXP1_08_PIN 71 // PG3
|
||||
|
||||
#define EXP2_01_PIN 50 // MISO
|
||||
#define EXP2_02_PIN 52 // SCK
|
||||
#define EXP2_03_PIN 72 // PJ2
|
||||
#define EXP2_04_PIN 53 // SDSS
|
||||
#define EXP2_05_PIN 14 // TX3
|
||||
#define EXP2_06_PIN 51 // MOSI
|
||||
#define EXP2_07_PIN 15 // RX3
|
||||
#define EXP2_08_PIN -1 // RESET
|
||||
|
||||
#define EXP3_01_PIN 62 // PK0 (A8)
|
||||
#define EXP3_02_PIN 76 // PJ5
|
||||
#define EXP3_03_PIN 20 // SDA
|
||||
#define EXP3_04_PIN -1 // GND
|
||||
#define EXP3_05_PIN 21 // SCL
|
||||
#define EXP3_06_PIN 16 // RX2
|
||||
#define EXP3_07_PIN -1 // GND
|
||||
#define EXP3_08_PIN 17 // TX2
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
|
||||
#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
|
||||
|
||||
#define KILL_PIN 32
|
||||
|
||||
#if ANY(IS_ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
#define LCD_PINS_RS EXP1_07_PIN
|
||||
#define LCD_PINS_EN EXP1_08_PIN
|
||||
#define LCD_PINS_D4 EXP1_06_PIN
|
||||
#define BTN_EN1 EXP1_03_PIN
|
||||
#define BTN_EN2 EXP1_05_PIN
|
||||
#else
|
||||
#define LCD_PINS_RS EXP1_04_PIN
|
||||
#define LCD_PINS_EN EXP1_03_PIN // On 0.6b, use 61
|
||||
#define LCD_PINS_D4 EXP1_05_PIN // On 0.6b, use 59
|
||||
#define LCD_PINS_D5 EXP1_06_PIN
|
||||
#define LCD_PINS_D6 EXP1_07_PIN
|
||||
#define LCD_PINS_D7 EXP1_08_PIN
|
||||
#define BTN_EN1 EXP2_05_PIN
|
||||
#define BTN_EN2 EXP2_03_PIN
|
||||
#endif
|
||||
|
||||
#define BTN_ENC EXP1_02_PIN // AUX-2
|
||||
#define BEEPER_PIN EXP1_01_PIN // AUX-4
|
||||
|
||||
#define SD_DETECT_PIN EXP2_07_PIN
|
||||
|
||||
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||
#endif
|
||||
|
||||
#endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
|
||||
|
||||
#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
|
||||
|
||||
// Alter timing for graphical display
|
||||
#if IS_U8GLIB_ST7920
|
||||
#define BOARD_ST7920_DELAY_1 0
|
||||
#define BOARD_ST7920_DELAY_2 250
|
||||
#define BOARD_ST7920_DELAY_3 0
|
||||
#endif
|
||||
Reference in New Issue
Block a user