Ender 3 - Update FW config

creality-ender3/Marlin-2.1.2.4/Marlin/Configuration.h

@@ -1576,7 +1576,7 @@
  * A total of 2 does fast/slow probes with a weighted average.
  * A total of 3 or more adds more slow probes, taking the average.
  */
-//#define MULTIPLE_PROBING 2
+#define MULTIPLE_PROBING 2
 //#define EXTRA_PROBING    1
 
 /**
@@ -1732,8 +1732,9 @@
 * Nozzle is above the plate when X=0.
 * It is is right shifted by 10mm related to plate's left border on X axis. 
 * Decrease X plate size by 10mm.
+* #define X_BED_SIZE 225
 */
-#define X_BED_SIZE 225
+#define X_BED_SIZE 235
 #define Y_BED_SIZE 235
 
 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
@@ -1742,13 +1743,15 @@
  * Nozzle is out of plate when Y=0.
  * It is is shifted by 4mm related to plate's bottom border on Y axis.
  * Increase Y_MIN_POS by 4mm.
+ * #define Y_MIN_POS -4
  */
-#define Y_MIN_POS -4
+#define Y_MIN_POS 0
 #define Z_MIN_POS 0
 /**
- * Nozzle can move out of the right side of the plate by 15mm.
+ * Nozzle can go out of bed @ X = BED_SIZE + 15mm
+ * #define X_MAX_POS (X_BED_SIZE + 15) 
  */
-#define X_MAX_POS (X_BED_SIZE + 15)
+#define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 250
 //#define I_MIN_POS 0
@@ -2079,7 +2082,7 @@
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LCD_BED_TRAMMING
+//#define LCD_BED_TRAMMING
 
 #if ENABLED(LCD_BED_TRAMMING)
   #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
@@ -2229,7 +2232,7 @@
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
   #define EEPROM_AUTO_INIT    // Init EEPROM automatically on any errors.
-  //#define EEPROM_INIT_NOW   // Init EEPROM on first boot after a new build.
+  #define EEPROM_INIT_NOW   // Init EEPROM on first boot after a new build.
 #endif
 
 // @section host