From 734071765deb54a51cfca8afaf837da11d49a98b Mon Sep 17 00:00:00 2001
From: iGoX <code@igox.org>
Date: Wed, 3 Sep 2025 12:34:20 +0200
Subject: [PATCH] Full OrcaSlicer config for Ender3 & ASWX4P

---
 OrcaSlicer/OrcaSlicer.conf                    |  359 ++++
 OrcaSlicer/README.md                          |   12 +
 OrcaSlicer/cache/12239093808561760700.lock    |    0
 OrcaSlicer/cache/fonts.cereal                 |  Bin 0 -> 6377 bytes
 .../log/debug_Fri_Aug_29_11_47_39_23452.log.0 |   35 +
 .../log/debug_Fri_Jun_20_09_35_25_88986.log.0 |  110 +
 .../log/debug_Fri_May_09_14_59_17_94315.log.0 |   21 +
 .../log/debug_Fri_May_09_15_20_57_3891.log.0  |   27 +
 .../log/debug_Fri_May_23_00_03_52_74776.log.0 |   83 +
 .../log/debug_Mon_Apr_28_18_47_36_2068.log.0  |   18 +
 .../log/debug_Mon_Jul_14_19_14_03_36525.log.0 |  173 ++
 .../log/debug_Mon_Jun_02_16_55_04_10119.log.0 |   41 +
 .../log/debug_Mon_May_12_10_42_08_47265.log.0 |   41 +
 .../log/debug_Mon_May_26_14_00_43_43070.log.0 |   75 +
 .../log/debug_Sat_Aug_30_15_32_23_6220.log.0  |   23 +
 .../log/debug_Sat_Jul_05_00_09_33_97389.log.0 |  134 ++
 .../log/debug_Sun_Aug_10_18_43_46_43696.log.0 |   33 +
 .../log/debug_Sun_Jun_08_17_34_11_78758.log.0 |   24 +
 .../log/debug_Sun_Jun_15_20_16_36_32856.log.0 |   17 +
 .../log/debug_Sun_Jun_29_15_32_43_31884.log.0 |   45 +
 .../log/debug_Thu_May_08_21_54_36_33220.log.0 |  642 ++++++
 .../log/debug_Tue_Apr_29_17_25_23_1413.log.0  |  137 ++
 .../log/debug_Tue_Aug_26_19_29_18_66247.log.0 |   44 +
 .../log/debug_Tue_Jul_15_15_27_39_68770.log.0 |   21 +
 .../log/debug_Tue_Jul_15_15_35_37_73979.log.0 |   37 +
 .../log/debug_Tue_May_06_00_31_32_68200.log.0 |    9 +
 .../log/debug_Tue_May_13_02_41_31_1104.log.0  |   25 +
 .../log/debug_Wed_May_07_09_38_04_45805.log.0 |   11 +
 .../log/debug_Wed_May_07_21_49_07_11611.log.0 |   12 +
 .../log/debug_Wed_May_14_11_14_13_15590.log.0 |  221 ++
 .../log/debug_Wed_May_21_16_45_21_35443.log.0 |   18 +
 .../log/debug_Wed_May_21_16_48_07_36570.log.0 |   43 +
 .../log/debug_Wed_May_21_17_21_22_59768.log.0 |   19 +
 .../log/debug_Wed_Sep_03_11_36_15_47475.log.0 |   16 +
 OrcaSlicer/printers/BL-P001.json              |   88 +
 OrcaSlicer/printers/BL-P002.json              |   88 +
 OrcaSlicer/printers/C11.json                  |   88 +
 OrcaSlicer/printers/C12.json                  |   80 +
 OrcaSlicer/printers/C13.json                  |   61 +
 OrcaSlicer/printers/N1.json                   |   62 +
 OrcaSlicer/printers/N2S.json                  |   61 +
 OrcaSlicer/printers/ams_load.gcode            |   51 +
 OrcaSlicer/printers/ams_unload.gcode          |   33 +
 OrcaSlicer/printers/filaments_blacklist.json  |   60 +
 OrcaSlicer/printers/version.txt               |    1 +
 OrcaSlicer/system/Artillery.json              |  310 +++
 .../Artillery/filament/Artillery ABS.json     |   85 +
 .../filament/Artillery Generic ABS.json       |   22 +
 .../filament/Artillery Generic ASA.json       |   22 +
 .../filament/Artillery Generic PETG.json      |   52 +
 .../filament/Artillery Generic PLA-CF.json    |   40 +
 .../filament/Artillery Generic PLA.json       |   37 +
 .../filament/Artillery Generic TPU.json       |   19 +
 .../Artillery/filament/Artillery PETG.json    |   85 +
 .../filament/Artillery PLA Basic.json         |   64 +
 .../filament/Artillery PLA Matte.json         |   64 +
 .../filament/Artillery PLA Silk.json          |   64 +
 .../filament/Artillery PLA Tough.json         |   70 +
 .../Artillery/filament/Artillery TPU.json     |   82 +
 .../Artillery/filament/fdm_filament_abs.json  |   82 +
 .../Artillery/filament/fdm_filament_asa.json  |   82 +
 .../filament/fdm_filament_common.json         |  135 ++
 .../Artillery/filament/fdm_filament_pet.json  |   76 +
 .../Artillery/filament/fdm_filament_pla.json  |   88 +
 .../Artillery/filament/fdm_filament_tpu.json  |   82 +
 .../machine/Artillery Genius 0.4 nozzle.json  |  116 ++
 .../Artillery Genius Pro 0.4 nozzle.json      |  117 ++
 .../machine/Artillery Genius Pro.json         |   12 +
 .../Artillery/machine/Artillery Genius.json   |   12 +
 .../machine/Artillery Hornet 0.4 nozzle.json  |  115 ++
 .../Artillery/machine/Artillery Hornet.json   |   12 +
 .../Artillery Sidewinder X1 0.4 nozzle.json   |  117 ++
 .../machine/Artillery Sidewinder X1.json      |   12 +
 .../Artillery Sidewinder X2 0.4 nozzle.json   |  117 ++
 .../machine/Artillery Sidewinder X2.json      |   12 +
 ...tillery Sidewinder X3 Plus 0.4 nozzle.json |  229 +++
 .../machine/Artillery Sidewinder X3 Plus.json |   12 +
 ...rtillery Sidewinder X3 Pro 0.4 nozzle.json |  230 +++
 .../machine/Artillery Sidewinder X3 Pro.json  |   12 +
 ...tillery Sidewinder X4 Plus 0.4 nozzle.json |  229 +++
 .../machine/Artillery Sidewinder X4 Plus.json |   12 +
 ...rtillery Sidewinder X4 Pro 0.4 nozzle.json |  229 +++
 .../machine/Artillery Sidewinder X4 Pro.json  |   12 +
 .../Artillery/machine/fdm_machine_common.json |  139 ++
 ...tra Fine @Artillery X4Plus 0.4 nozzle.json |   14 +
 ...xtra Fine @Artillery X4Pro 0.4 nozzle.info |    5 +
 ...xtra Fine @Artillery X4Pro 0.4 nozzle.json |   14 +
 ... Quality @Artillery X4Plus 0.4 nozzle.json |   20 +
 ...h Quality @Artillery X4Pro 0.4 nozzle.json |   20 +
 ...2mm Fine @Artillery X4Plus 0.4 nozzle.json |   14 +
 ...12mm Fine @Artillery X4Pro 0.4 nozzle.json |   14 +
 ... Quality @Artillery X4Plus 0.4 nozzle.json |   20 +
 ...h Quality @Artillery X4Pro 0.4 nozzle.json |   20 +
 .../0.15mm Optimal @Artillery Genius Pro.json |  108 +
 .../0.15mm Optimal @Artillery Genius.json     |  108 +
 ... Quality @Artillery X4Plus 0.4 nozzle.json |   20 +
 ...h Quality @Artillery X4Pro 0.4 nozzle.json |   20 +
 .../0.16mm Optimal @Artillery Hornet.json     |  108 +
 .../process/0.16mm Optimal @Artillery X1.json |  108 +
 ... Optimal @Artillery X4Plus 0.4 nozzle.json |   18 +
 ...m Optimal @Artillery X4Pro 0.4 nozzle.json |   16 +
 ...0.20mm Standard @Artillery Genius Pro.json |  108 +
 .../0.20mm Standard @Artillery Genius.json    |  108 +
 .../0.20mm Standard @Artillery Hornet.json    |  108 +
 .../0.20mm Standard @Artillery X1.json        |  108 +
 .../0.20mm Standard @Artillery X2.json        |  108 +
 ...Standard @Artillery X3Plus 0.4 nozzle.json |  285 +++
 ... Standard @Artillery X3Pro 0.4 nozzle.json |  285 +++
 ...Standard @Artillery X4Plus 0.4 nozzle.json |  285 +++
 ... Standard @Artillery X4Pro 0.4 nozzle.info |    5 +
 ... Standard @Artillery X4Pro 0.4 nozzle.json |  286 +++
 ...Strength @Artillery X4Plus 0.4 nozzle.json |   10 +
 ... Strength @Artillery X4Pro 0.4 nozzle.json |   10 +
 .../0.24mm Draft @Artillery Hornet.json       |  108 +
 .../process/0.24mm Draft @Artillery X1.json   |  108 +
 ...mm Draft @Artillery X4Plus 0.4 nozzle.json |   11 +
 ...4mm Draft @Artillery X4Pro 0.4 nozzle.json |   10 +
 .../0.25mm Draft @Artillery Genius Pro.json   |  108 +
 .../0.25mm Draft @Artillery Genius.json       |  108 +
 ...ra Draft @Artillery X4Plus 0.4 nozzle.json |   11 +
 ...tra Draft @Artillery X4Pro 0.4 nozzle.json |   10 +
 .../Artillery/process/fdm_process_common.json |  107 +
 OrcaSlicer/system/Creality.json               | 1786 +++++++++++++++++
 .../Creality Generic ABS @Ender-3V3-all.json  |   21 +
 .../Creality Generic ABS @Ender-5Max-all.json |   99 +
 .../Creality Generic ABS @Hi-all.json         |   15 +
 .../Creality Generic ABS @K1-all.json         |   23 +
 .../Creality Generic ABS @K2-all.json         |   27 +
 .../filament/Creality Generic ABS.json        |   64 +
 .../Creality Generic ASA @Ender-3V3-all.json  |   21 +
 .../Creality Generic ASA @Ender-5Max-all.json |   99 +
 .../Creality Generic ASA @Hi-all.json         |   15 +
 .../Creality Generic ASA @K1-all.json         |   23 +
 .../Creality Generic ASA @K2-all.json         |   27 +
 .../Creality Generic ASA-CF @Hi-all.json      |   14 +
 .../filament/Creality Generic ASA.json        |   54 +
 .../Creality Generic PA @Ender-5Max-all.json  |   99 +
 ...Creality Generic PA-CF @Ender-3V3-all.json |   14 +
 .../Creality Generic PA-CF @K1-all.json       |   20 +
 .../Creality Generic PA-CF @K2-all.json       |   24 +
 .../filament/Creality Generic PA-CF.json      |   82 +
 .../filament/Creality Generic PC @K1-all.json |   23 +
 .../filament/Creality Generic PC.json         |   14 +
 .../Creality Generic PETG @Ender-3V3-all.json |   31 +
 ...Creality Generic PETG @Ender-5Max-all.json |   99 +
 .../Creality Generic PETG @Hi-all.json        |   25 +
 .../Creality Generic PETG @K1-all.json        |   56 +
 .../Creality Generic PETG @K2-all.json        |   60 +
 .../Creality Generic PETG-CF @Hi-all.json     |   14 +
 .../filament/Creality Generic PETG.json       |   74 +
 .../Creality Generic PLA @Ender-3V3-all.json  |   29 +
 .../Creality Generic PLA @Ender-5Max-all.json |   99 +
 .../Creality Generic PLA @Hi-all.json         |   94 +
 .../Creality Generic PLA @K1-all.json         |   47 +
 .../Creality Generic PLA @K2-all.json         |   54 +
 ...Generic PLA High Speed @Ender-3V3-all.json |   22 +
 ...eality Generic PLA High Speed @Hi-all.json |   18 +
 ...eality Generic PLA High Speed @K1-all.json |   23 +
 ...eality Generic PLA High Speed @K2-all.json |   17 +
 ...lity Generic PLA Matte @Ender-3V3-all.json |   20 +
 .../Creality Generic PLA Matte @Hi-all.json   |   15 +
 .../Creality Generic PLA Matte @K1-all.json   |   23 +
 .../Creality Generic PLA Matte @K2-all.json   |   17 +
 ...ality Generic PLA Silk @Ender-3V3-all.json |   20 +
 .../Creality Generic PLA Silk @Hi-all.json    |   18 +
 .../Creality Generic PLA Silk @K1-all.json    |   23 +
 .../Creality Generic PLA Silk @K2-all.json    |   17 +
 .../Creality Generic PLA Wood @Hi-all.json    |   18 +
 .../Creality Generic PLA-CF @Hi-all.json      |   15 +
 .../Creality Generic PLA-CF @K1-all.json      |   23 +
 .../Creality Generic PLA-CF @K2-all.json      |   23 +
 .../filament/Creality Generic PLA-CF.json     |   60 +
 .../filament/Creality Generic PLA.json        |   65 +
 .../Creality Generic TPU @Ender-3V3-all.json  |   27 +
 .../Creality Generic TPU @Ender-5Max-all.json |   99 +
 .../Creality Generic TPU @Hi-all.json         |   37 +
 .../Creality Generic TPU @K1-all.json         |   41 +
 .../Creality Generic TPU @K2-all.json         |   42 +
 .../filament/Creality Generic TPU.json        |   27 +
 .../filament/Creality HF Generic PLA.json     |   33 +
 .../Creality HF Generic Speed PLA.json        |   27 +
 .../Creality Hyper ABS @Ender-5Max-all.json   |   99 +
 .../Creality Hyper PLA @Ender-5Max-all.json   |  100 +
 ...Creality Hyper PLA-CF @Ender-5Max-all.json |   99 +
 .../Creality Silk PLA @Ender-5Max-all.json    |   99 +
 .../Creality/filament/fdm_filament_abs.json   |   88 +
 .../Creality/filament/fdm_filament_asa.json   |   85 +
 .../filament/fdm_filament_common.json         |  144 ++
 .../Creality/filament/fdm_filament_pa.json    |   82 +
 .../Creality/filament/fdm_filament_pc.json    |   82 +
 .../Creality/filament/fdm_filament_pet.json   |   82 +
 .../Creality/filament/fdm_filament_pla.json   |   94 +
 .../Creality/filament/fdm_filament_tpu.json   |   82 +
 .../Creality CR-10 Max 0.4 nozzle.json        |   26 +
 .../Creality/machine/Creality CR-10 Max.json  |   12 +
 .../machine/Creality CR-10 SE 0.2 nozzle.json |  128 ++
 .../machine/Creality CR-10 SE 0.4 nozzle.json |  128 ++
 .../machine/Creality CR-10 SE 0.6 nozzle.json |  128 ++
 .../machine/Creality CR-10 SE 0.8 nozzle.json |  128 ++
 .../Creality/machine/Creality CR-10 SE.json   |   12 +
 .../machine/Creality CR-10 V2 0.4 nozzle.json |  110 +
 .../Creality/machine/Creality CR-10 V2.json   |   12 +
 .../machine/Creality CR-6 Max 0.2 nozzle.json |   27 +
 .../machine/Creality CR-6 Max 0.4 nozzle.json |   26 +
 .../machine/Creality CR-6 Max 0.6 nozzle.json |   27 +
 .../machine/Creality CR-6 Max 0.8 nozzle.json |   27 +
 .../Creality/machine/Creality CR-6 Max.json   |   11 +
 .../machine/Creality CR-6 SE 0.2 nozzle.json  |   27 +
 .../machine/Creality CR-6 SE 0.4 nozzle.json  |   26 +
 .../machine/Creality CR-6 SE 0.6 nozzle.json  |   27 +
 .../machine/Creality CR-6 SE 0.8 nozzle.json  |   27 +
 .../Creality/machine/Creality CR-6 SE.json    |   12 +
 .../machine/Creality CR-M4 0.4 nozzle.json    |   58 +
 .../Creality/machine/Creality CR-M4.json      |   12 +
 .../machine/Creality Ender-3 0.2 nozzle.json  |  114 ++
 .../machine/Creality Ender-3 0.4 nozzle.json  |  114 ++
 .../machine/Creality Ender-3 0.6 nozzle.json  |  114 ++
 .../machine/Creality Ender-3 0.8 nozzle.json  |  114 ++
 .../Creality Ender-3 Pro 0.2 nozzle.json      |  114 ++
 .../Creality Ender-3 Pro 0.4 nozzle.json      |  114 ++
 .../Creality Ender-3 Pro 0.6 nozzle.json      |  114 ++
 .../Creality Ender-3 Pro 0.8 nozzle.json      |  114 ++
 .../machine/Creality Ender-3 Pro.json         |   12 +
 .../Creality Ender-3 S1 0.4 nozzle.json       |  110 +
 .../Creality Ender-3 S1 Plus 0.2 nozzle.json  |  114 ++
 .../Creality Ender-3 S1 Plus 0.4 nozzle.json  |  114 ++
 .../Creality Ender-3 S1 Plus 0.6 nozzle.json  |  114 ++
 .../Creality Ender-3 S1 Plus 0.8 nozzle.json  |  115 ++
 .../machine/Creality Ender-3 S1 Plus.json     |   12 +
 .../Creality Ender-3 S1 Pro 0.4 nozzle.json   |  113 ++
 .../machine/Creality Ender-3 S1 Pro.json      |   12 +
 .../Creality/machine/Creality Ender-3 S1.json |   12 +
 .../Creality Ender-3 V2 0.4 nozzle.json       |   25 +
 .../Creality Ender-3 V2 Neo 0.4 nozzle.json   |   88 +
 .../machine/Creality Ender-3 V2 Neo.json      |   12 +
 .../Creality/machine/Creality Ender-3 V2.json |   12 +
 .../Creality Ender-3 V3 0.4 nozzle.json       |  137 ++
 .../Creality Ender-3 V3 0.6 nozzle.json       |  137 ++
 .../Creality Ender-3 V3 KE 0.4 nozzle.json    |  129 ++
 .../machine/Creality Ender-3 V3 KE.json       |   12 +
 .../Creality Ender-3 V3 Plus 0.4 nozzle.json  |  134 ++
 .../Creality Ender-3 V3 Plus 0.6 nozzle.json  |  134 ++
 .../machine/Creality Ender-3 V3 Plus.json     |   12 +
 .../Creality Ender-3 V3 SE 0.2 nozzle.json    |  126 ++
 .../Creality Ender-3 V3 SE 0.4 nozzle.json    |  126 ++
 .../Creality Ender-3 V3 SE 0.6 nozzle.json    |  126 ++
 .../Creality Ender-3 V3 SE 0.8 nozzle.json    |  126 ++
 .../machine/Creality Ender-3 V3 SE.json       |   12 +
 .../Creality/machine/Creality Ender-3 V3.json |   12 +
 .../Creality/machine/Creality Ender-3.json    |   12 +
 .../machine/Creality Ender-5 0.4 nozzle.json  |  109 +
 .../Creality Ender-5 Max 0.4 nozzle.json      |  112 ++
 .../machine/Creality Ender-5 Max.json         |   12 +
 .../Creality Ender-5 Plus 0.4 nozzle.json     |  112 ++
 .../machine/Creality Ender-5 Plus.json        |   12 +
 ...reality Ender-5 Pro (2019) 0.2 nozzle.json |   32 +
 ...eality Ender-5 Pro (2019) 0.25 nozzle.json |   32 +
 ...reality Ender-5 Pro (2019) 0.3 nozzle.json |   32 +
 ...reality Ender-5 Pro (2019) 0.4 nozzle.json |   25 +
 ...reality Ender-5 Pro (2019) 0.5 nozzle.json |   32 +
 ...reality Ender-5 Pro (2019) 0.6 nozzle.json |   32 +
 ...reality Ender-5 Pro (2019) 0.8 nozzle.json |   32 +
 ...reality Ender-5 Pro (2019) 1.0 nozzle.json |   32 +
 .../machine/Creality Ender-5 Pro (2019).json  |   12 +
 .../Creality Ender-5 S1 0.4 nozzle.json       |  109 +
 .../Creality/machine/Creality Ender-5 S1.json |   12 +
 .../Creality/machine/Creality Ender-5.json    |   12 +
 .../machine/Creality Ender-5S 0.4 nozzle.json |  109 +
 .../Creality/machine/Creality Ender-5S.json   |   12 +
 .../machine/Creality Ender-6 0.4 nozzle.json  |  109 +
 .../Creality/machine/Creality Ender-6.json    |   12 +
 .../machine/Creality Hi 0.4 nozzle.json       |  145 ++
 .../machine/Creality Hi 0.6 nozzle.json       |  145 ++
 .../system/Creality/machine/Creality Hi.json  |   13 +
 .../machine/Creality K1 (0.4 nozzle).json     |  133 ++
 .../machine/Creality K1 (0.6 nozzle).json     |  133 ++
 .../machine/Creality K1 (0.8 nozzle).json     |  133 ++
 .../machine/Creality K1 Max (0.4 nozzle).json |  134 ++
 .../machine/Creality K1 Max (0.6 nozzle).json |  134 ++
 .../machine/Creality K1 Max (0.8 nozzle).json |  134 ++
 .../Creality/machine/Creality K1 Max.json     |   12 +
 .../machine/Creality K1 SE 0.4 nozzle.json    |  134 ++
 .../Creality/machine/Creality K1 SE.json      |   12 +
 .../system/Creality/machine/Creality K1.json  |   12 +
 .../machine/Creality K1C 0.4 nozzle.json      |  134 ++
 .../machine/Creality K1C 0.6 nozzle.json      |  134 ++
 .../machine/Creality K1C 0.8 nozzle.json      |  134 ++
 .../system/Creality/machine/Creality K1C.json |   12 +
 .../machine/Creality K2 Plus 0.2 nozzle.json  |  149 ++
 .../machine/Creality K2 Plus 0.4 nozzle.json  |  149 ++
 .../machine/Creality K2 Plus 0.6 nozzle.json  |  149 ++
 .../machine/Creality K2 Plus 0.8 nozzle.json  |  149 ++
 .../Creality/machine/Creality K2 Plus.json    |   12 +
 .../Creality Sermoon V1 0.4 nozzle.json       |   73 +
 .../Creality/machine/Creality Sermoon V1.json |   15 +
 .../Creality/machine/fdm_creality_common.json |  139 ++
 .../Creality/machine/fdm_machine_common.json  |  120 ++
 ...0.08mm SuperDetail @Creality CR-6 0.2.json |   24 +
 ...Detail @Creality Ender5Pro (2019) 0.2.json |   12 +
 ...etail @Creality Ender5Pro (2019) 0.25.json |   12 +
 ...Detail @Creality Ender5Pro (2019) 0.3.json |   12 +
 ...m SuperDetail @Creality Hi 0.4 nozzle.json |  117 ++
 ...erDetail @Creality K2 Plus 0.2 nozzle.json |  110 +
 ...erDetail @Creality K2 Plus 0.4 nozzle.json |  110 +
 .../0.10mm HighDetail @Creality CR-6 0.4.json |   22 +
 .../0.10mm HighDetail @Creality CR-M4.json    |  103 +
 ...Detail @Creality Ender5Pro (2019) 0.2.json |   12 +
 ...etail @Creality Ender5Pro (2019) 0.25.json |   12 +
 ...Detail @Creality Ender5Pro (2019) 0.3.json |   12 +
 ...ghDetail @Creality K2 Plus 0.2 nozzle.json |  110 +
 .../0.12mm Detail @Creality CR-6 0.2.json     |   24 +
 .../0.12mm Detail @Creality CR-6 0.4.json     |   17 +
 ...Detail @Creality Ender5Pro (2019) 0.2.json |   12 +
 ...etail @Creality Ender5Pro (2019) 0.25.json |   12 +
 ...Detail @Creality Ender5Pro (2019) 0.3.json |   12 +
 ...Detail @Creality Ender5Pro (2019) 0.5.json |   12 +
 ...m Detail @Creality K2 Plus 0.2 nozzle.json |  110 +
 ...m Detail @Creality K2 Plus 0.4 nozzle.json |  110 +
 .../0.12mm Fine @Creality CR10Max.json        |  108 +
 .../0.12mm Fine @Creality CR10SE 0.2.json     |  118 ++
 .../0.12mm Fine @Creality CR10SE 0.4.json     |  118 ++
 .../0.12mm Fine @Creality CR10SE 0.6.json     |  118 ++
 .../0.12mm Fine @Creality CR10SE 0.8.json     |  118 ++
 .../0.12mm Fine @Creality Ender3 0.2.json     |  108 +
 .../0.12mm Fine @Creality Ender3 0.4.json     |  108 +
 .../0.12mm Fine @Creality Ender3 0.6.json     |  108 +
 .../0.12mm Fine @Creality Ender3 0.8.json     |  108 +
 .../0.12mm Fine @Creality Ender3 Pro 0.2.json |  108 +
 .../0.12mm Fine @Creality Ender3 Pro 0.4.json |  108 +
 .../0.12mm Fine @Creality Ender3 Pro 0.6.json |  108 +
 .../0.12mm Fine @Creality Ender3 Pro 0.8.json |  108 +
 .../0.12mm Fine @Creality Ender3V2.json       |  108 +
 .../0.12mm Fine @Creality Ender3V2Neo.json    |  108 +
 ...mm Fine @Creality Ender3V3 0.4 nozzle.json |  118 ++
 .../0.12mm Fine @Creality Ender3V3KE.json     |  120 ++
 ...ine @Creality Ender3V3Plus 0.4 nozzle.json |  118 ++
 .../0.12mm Fine @Creality Ender3V3SE 0.2.json |  111 +
 .../0.12mm Fine @Creality Ender3V3SE 0.4.json |  111 +
 .../0.12mm Fine @Creality Ender3V3SE 0.6.json |  111 +
 .../0.12mm Fine @Creality Ender3V3SE 0.8.json |  111 +
 ....12mm Fine @Creality Ender5Pro (2019).json |  108 +
 .../0.12mm Fine @Creality Hi 0.4 nozzle.json  |  126 ++
 ...0.12mm Fine @Creality K1 (0.4 nozzle).json |  118 ++
 ....12mm Fine @Creality K1 SE 0.4 nozzle.json |  119 ++
 .../0.12mm Fine @Creality K1C 0.4 nozzle.json |  118 ++
 ...2mm Fine @Creality K1Max (0.4 nozzle).json |  118 ++
 ... Optimal @Creality K2 Plus 0.2 nozzle.json |  110 +
 .../0.15mm Detail @Creality CR-M4.json        |  103 +
 .../0.15mm Optimal @Creality CR10Max.json     |  108 +
 .../0.15mm Optimal @Creality Ender3V2.json    |  108 +
 ...mm Optimal @Creality Ender5Pro (2019).json |  108 +
 .../0.16mm Optimal @Creality CR-6 0.2.json    |   23 +
 .../0.16mm Optimal @Creality CR-6 0.4.json    |   52 +
 .../0.16mm Optimal @Creality CR-6 0.6.json    |   24 +
 .../0.16mm Optimal @Creality CR10SE 0.2.json  |  118 ++
 .../0.16mm Optimal @Creality CR10SE 0.4.json  |  118 ++
 .../0.16mm Optimal @Creality CR10SE 0.6.json  |  118 ++
 .../0.16mm Optimal @Creality CR10SE 0.8.json  |  118 ++
 .../0.16mm Optimal @Creality CR10V2.json      |  108 +
 .../0.16mm Optimal @Creality Ender3 0.2.json  |  108 +
 .../0.16mm Optimal @Creality Ender3 0.4.json  |  108 +
 .../0.16mm Optimal @Creality Ender3 0.6.json  |  108 +
 .../0.16mm Optimal @Creality Ender3 0.8.json  |  108 +
 ...16mm Optimal @Creality Ender3 Pro 0.2.json |  108 +
 ...16mm Optimal @Creality Ender3 Pro 0.4.json |  108 +
 ...16mm Optimal @Creality Ender3 Pro 0.6.json |  108 +
 ...16mm Optimal @Creality Ender3 Pro 0.8.json |  108 +
 .../0.16mm Optimal @Creality Ender3S1.json    |  108 +
 ...mm Optimal @Creality Ender3S1Plus 0.2.json |  108 +
 ...mm Optimal @Creality Ender3S1Plus 0.4.json |  108 +
 ...mm Optimal @Creality Ender3S1Plus 0.6.json |  108 +
 ...mm Optimal @Creality Ender3S1Plus 0.8.json |  108 +
 .../0.16mm Optimal @Creality Ender3S1Pro.json |  108 +
 .../0.16mm Optimal @Creality Ender3V2Neo.json |  108 +
 ...Optimal @Creality Ender3V3 0.4 nozzle.json |  118 ++
 .../0.16mm Optimal @Creality Ender3V3KE.json  |  120 ++
 ...mal @Creality Ender3V3Plus 0.4 nozzle.json |  118 ++
 ...16mm Optimal @Creality Ender3V3SE 0.2.json |  111 +
 ...16mm Optimal @Creality Ender3V3SE 0.4.json |  111 +
 ...16mm Optimal @Creality Ender3V3SE 0.6.json |  111 +
 ...16mm Optimal @Creality Ender3V3SE 0.8.json |  111 +
 .../0.16mm Optimal @Creality Ender5.json      |  108 +
 .../0.16mm Optimal @Creality Ender5Plus.json  |  108 +
 ...ptimal @Creality Ender5Pro (2019) 0.2.json |   12 +
 ...timal @Creality Ender5Pro (2019) 0.25.json |   12 +
 ...ptimal @Creality Ender5Pro (2019) 0.3.json |   12 +
 ...ptimal @Creality Ender5Pro (2019) 0.5.json |   12 +
 ...ptimal @Creality Ender5Pro (2019) 0.6.json |   12 +
 .../0.16mm Optimal @Creality Ender5S.json     |  108 +
 .../0.16mm Optimal @Creality Ender5S1.json    |  108 +
 .../0.16mm Optimal @Creality Ender6.json      |  108 +
 ....16mm Optimal @Creality Hi 0.4 nozzle.json |  119 ++
 ...6mm Optimal @Creality K1 (0.4 nozzle).json |  118 ++
 ...mm Optimal @Creality K1 SE 0.4 nozzle.json |  119 ++
 ...16mm Optimal @Creality K1C 0.4 nozzle.json |  118 ++
 ... Optimal @Creality K1Max (0.4 nozzle).json |  118 ++
 ... Optimal @Creality K2 Plus 0.4 nozzle.json |  110 +
 .../0.16mm Optimal @Creality Sermoon V1.json  |  112 ++
 ...m Detail @Creality K2 Plus 0.6 nozzle.json |  110 +
 .../0.20mm Standard @Creality CR-6 0.4.json   |   13 +
 .../0.20mm Standard @Creality CR-6 0.6.json   |   21 +
 .../0.20mm Standard @Creality CR-M4.json      |  103 +
 .../0.20mm Standard @Creality CR10Max.json    |  108 +
 .../0.20mm Standard @Creality CR10SE 0.2.json |  118 ++
 .../0.20mm Standard @Creality CR10SE 0.4.json |  118 ++
 .../0.20mm Standard @Creality CR10SE 0.6.json |  118 ++
 .../0.20mm Standard @Creality CR10SE 0.8.json |  118 ++
 .../0.20mm Standard @Creality CR10V2.json     |  108 +
 ...rd @Creality Ender-5 Max 0.4mm nozzle.json |  261 +++
 .../0.20mm Standard @Creality Ender3 0.2.json |  108 +
 .../0.20mm Standard @Creality Ender3 0.4.json |  108 +
 .../0.20mm Standard @Creality Ender3 0.6.json |  108 +
 .../0.20mm Standard @Creality Ender3 0.8.json |  108 +
 ...0mm Standard @Creality Ender3 Pro 0.2.json |  108 +
 ...0mm Standard @Creality Ender3 Pro 0.4.json |  108 +
 ...0mm Standard @Creality Ender3 Pro 0.6.json |  108 +
 ...0mm Standard @Creality Ender3 Pro 0.8.json |  108 +
 .../0.20mm Standard @Creality Ender3.json     |  108 +
 .../0.20mm Standard @Creality Ender3S1.json   |  108 +
 ...m Standard @Creality Ender3S1Plus 0.2.json |  108 +
 ...m Standard @Creality Ender3S1Plus 0.4.json |  108 +
 ...m Standard @Creality Ender3S1Plus 0.6.json |  108 +
 ...m Standard @Creality Ender3S1Plus 0.8.json |  108 +
 ...0.20mm Standard @Creality Ender3S1Pro.json |  108 +
 .../0.20mm Standard @Creality Ender3V2.json   |  108 +
 ...0.20mm Standard @Creality Ender3V2Neo.json |  108 +
 ...tandard @Creality Ender3V3 0.4 nozzle.json |  118 ++
 .../0.20mm Standard @Creality Ender3V3KE.json |  121 ++
 ...ard @Creality Ender3V3Plus 0.4 nozzle.json |  118 ++
 ...0mm Standard @Creality Ender3V3SE 0.2.json |  111 +
 ...0mm Standard @Creality Ender3V3SE 0.4.json |  111 +
 ...0mm Standard @Creality Ender3V3SE 0.6.json |  111 +
 ...0mm Standard @Creality Ender3V3SE 0.8.json |  111 +
 .../0.20mm Standard @Creality Ender5.json     |  108 +
 .../0.20mm Standard @Creality Ender5Plus.json |  108 +
 ...ndard @Creality Ender5Pro (2019) 0.25.json |   11 +
 ...andard @Creality Ender5Pro (2019) 0.3.json |   11 +
 ...andard @Creality Ender5Pro (2019) 0.5.json |   11 +
 ...andard @Creality Ender5Pro (2019) 0.6.json |   11 +
 ...andard @Creality Ender5Pro (2019) 0.8.json |   11 +
 ...m Standard @Creality Ender5Pro (2019).json |  108 +
 .../0.20mm Standard @Creality Ender5S.json    |  108 +
 .../0.20mm Standard @Creality Ender5S1.json   |  108 +
 .../0.20mm Standard @Creality Ender6.json     |  108 +
 ...20mm Standard @Creality Hi 0.4 nozzle.json |  126 ++
 ...mm Standard @Creality K1 (0.4 nozzle).json |  118 ++
 .../0.20mm Standard @Creality K1 SE 0.4.json  |  112 ++
 ...0mm Standard @Creality K1C 0.4 nozzle.json |  118 ++
 ...Standard @Creality K1Max (0.4 nozzle).json |  118 ++
 ...Standard @Creality K2 Plus 0.4 nozzle.json |  110 +
 .../0.20mm Standard @Creality Sermoon V1.json |  112 ++
 ...st @Creality Ender-5 Max 0.4mm nozzle.json |  263 +++
 ...m Detail @Creality K2 Plus 0.8 nozzle.json |  110 +
 .../0.24mm Draft @Creality CR-6 0.4.json      |   22 +
 .../0.24mm Draft @Creality CR-6 0.6.json      |   22 +
 .../0.24mm Draft @Creality CR10Max.json       |  108 +
 .../0.24mm Draft @Creality CR10SE 0.2.json    |  118 ++
 .../0.24mm Draft @Creality CR10SE 0.4.json    |  118 ++
 .../0.24mm Draft @Creality CR10SE 0.6.json    |  118 ++
 .../0.24mm Draft @Creality CR10SE 0.8.json    |  118 ++
 .../0.24mm Draft @Creality Ender3 0.2.json    |  108 +
 .../0.24mm Draft @Creality Ender3 0.4.json    |  108 +
 .../0.24mm Draft @Creality Ender3 0.6.json    |  108 +
 .../0.24mm Draft @Creality Ender3 0.8.json    |  108 +
 ...0.24mm Draft @Creality Ender3 Pro 0.2.json |  108 +
 ...0.24mm Draft @Creality Ender3 Pro 0.4.json |  108 +
 ...0.24mm Draft @Creality Ender3 Pro 0.6.json |  108 +
 ...0.24mm Draft @Creality Ender3 Pro 0.8.json |  108 +
 ...24mm Draft @Creality Ender3S1Plus 0.2.json |  108 +
 ...24mm Draft @Creality Ender3S1Plus 0.4.json |  108 +
 ...24mm Draft @Creality Ender3S1Plus 0.6.json |  108 +
 ...24mm Draft @Creality Ender3S1Plus 0.8.json |  108 +
 .../0.24mm Draft @Creality Ender3V2.json      |  108 +
 .../0.24mm Draft @Creality Ender3V2Neo.json   |  108 +
 ...m Draft @Creality Ender3V3 0.4 nozzle.json |  118 ++
 .../0.24mm Draft @Creality Ender3V3KE.json    |  120 ++
 ...aft @Creality Ender3V3Plus 0.4 nozzle.json |  118 ++
 ...0.24mm Draft @Creality Ender3V3SE 0.2.json |  111 +
 ...0.24mm Draft @Creality Ender3V3SE 0.4.json |  111 +
 ...0.24mm Draft @Creality Ender3V3SE 0.6.json |  111 +
 ...0.24mm Draft @Creality Ender3V3SE 0.8.json |  111 +
 ... Draft @Creality Ender5Pro (2019) 0.3.json |   11 +
 ... Draft @Creality Ender5Pro (2019) 0.5.json |   11 +
 ... Draft @Creality Ender5Pro (2019) 0.6.json |   11 +
 ... Draft @Creality Ender5Pro (2019) 0.8.json |   11 +
 ...24mm Draft @Creality Ender5Pro (2019).json |  108 +
 .../0.24mm Draft @Creality Hi 0.4 nozzle.json |  126 ++
 ....24mm Draft @Creality K1 (0.4 nozzle).json |  118 ++
 ...24mm Draft @Creality K1 SE 0.4 nozzle.json |  119 ++
 ...0.24mm Draft @Creality K1C 0.4 nozzle.json |  118 ++
 ...mm Draft @Creality K1Max (0.4 nozzle).json |  118 ++
 ...mm Draft @Creality K2 Plus 0.4 nozzle.json |  110 +
 .../0.24mm Optimal @Creality CR-6 0.8.json    |   23 +
 ...Optimal @Creality Ender3V3 0.6 nozzle.json |  118 ++
 ...mal @Creality Ender3V3Plus 0.6 nozzle.json |  118 ++
 ....24mm Optimal @Creality Hi 0.6 nozzle.json |  125 ++
 ...4mm Optimal @Creality K1 (0.6 nozzle).json |  117 ++
 ...24mm Optimal @Creality K1C 0.6 nozzle.json |  117 ++
 ... Optimal @Creality K1Max (0.6 nozzle).json |  117 ++
 ... Optimal @Creality K2 Plus 0.6 nozzle.json |  110 +
 .../0.28mm Standard @Creality Sermoon V1.json |  112 ++
 .../0.28mm SuperDraft @Creality CR-6 0.4.json |   18 +
 .../0.28mm SuperDraft @Creality CR-6 0.6.json |   22 +
 ....28mm SuperDraft @Creality Ender3 0.2.json |  108 +
 ....28mm SuperDraft @Creality Ender3 0.4.json |  108 +
 ....28mm SuperDraft @Creality Ender3 0.6.json |  108 +
 ....28mm SuperDraft @Creality Ender3 0.8.json |  108 +
 ...m SuperDraft @Creality Ender3 Pro 0.2.json |  108 +
 ...m SuperDraft @Creality Ender3 Pro 0.4.json |  108 +
 ...m SuperDraft @Creality Ender3 Pro 0.6.json |  108 +
 ...m SuperDraft @Creality Ender3 Pro 0.8.json |  108 +
 ...rDraft @Creality Ender5Pro (2019) 0.5.json |   11 +
 ...rDraft @Creality Ender5Pro (2019) 0.6.json |   11 +
 ...rDraft @Creality Ender5Pro (2019) 0.8.json |   11 +
 ...rDraft @Creality Ender5Pro (2019) 1.0.json |   11 +
 ...perDraft @Creality K2 Plus 0.4 nozzle.json |  110 +
 ...tandard @Creality Ender3V3 0.6 nozzle.json |  117 ++
 ...ard @Creality Ender3V3Plus 0.6 nozzle.json |  117 ++
 ...30mm Standard @Creality Hi 0.6 nozzle.json |  125 ++
 ...mm Standard @Creality K1 (0.6 nozzle).json |  117 ++
 ...0mm Standard @Creality K1C 0.6 nozzle.json |  117 ++
 ...Standard @Creality K1Max (0.6 nozzle).json |  117 ++
 ...Standard @Creality K2 Plus 0.6 nozzle.json |  110 +
 .../0.32mm Chunky @Creality CR-6 0.6.json     |   23 +
 ...2mm Optimal @Creality K1 (0.8 nozzle).json |  117 ++
 ...32mm Optimal @Creality K1C 0.8 nozzle.json |  117 ++
 ... Optimal @Creality K1Max (0.8 nozzle).json |  117 ++
 ... Optimal @Creality K2 Plus 0.8 nozzle.json |  110 +
 .../0.32mm Standard @Creality CR-6 0.8.json   |   23 +
 ...Chunky @Creality Ender5Pro (2019) 0.5.json |   11 +
 ...Chunky @Creality Ender5Pro (2019) 0.6.json |   11 +
 ...Chunky @Creality Ender5Pro (2019) 0.8.json |   11 +
 ...Chunky @Creality Ender5Pro (2019) 1.0.json |   11 +
 ...m Draft @Creality Ender3V3 0.6 nozzle.json |  117 ++
 ...aft @Creality Ender3V3Plus 0.6 nozzle.json |  117 ++
 .../0.36mm Draft @Creality Hi 0.6 nozzle.json |  125 ++
 ....36mm Draft @Creality K1 (0.6 nozzle).json |  117 ++
 ...0.36mm Draft @Creality K1C 0.6 nozzle.json |  117 ++
 ...mm Draft @Creality K1Max (0.6 nozzle).json |  117 ++
 ...mm Draft @Creality K2 Plus 0.6 nozzle.json |  110 +
 ...0.36mm SuperChunky @Creality CR-6 0.6.json |   23 +
 .../0.40mm Draft @Creality CR-6 0.8.json      |   23 +
 ...mm Standard @Creality K1 (0.8 nozzle).json |  117 ++
 ...0mm Standard @Creality K1C 0.8 nozzle.json |  117 ++
 ...Standard @Creality K1Max (0.8 nozzle).json |  117 ++
 ...Standard @Creality K2 Plus 0.8 nozzle.json |  110 +
 ...perDraft @Creality K2 Plus 0.6 nozzle.json |  110 +
 ...m SuperExtraChunky @Creality CR-6 0.6.json |   23 +
 .../0.48mm Chunky @Creality CR-6 0.8.json     |   23 +
 .../0.48mm Draft @Creality CR-6 0.8.json      |   23 +
 ....48mm Draft @Creality K1 (0.8 nozzle).json |  117 ++
 ...0.48mm Draft @Creality K1C 0.8 nozzle.json |  117 ++
 ...mm Draft @Creality K1Max (0.8 nozzle).json |  117 ++
 ...mm Draft @Creality K2 Plus 0.8 nozzle.json |  110 +
 ...0.56mm SuperChunky @Creality CR-6 0.8.json |   23 +
 ...perDraft @Creality K2 Plus 0.8 nozzle.json |  110 +
 .../Creality/process/fdm_process_common.json  |   70 +
 .../process/fdm_process_common_klipper.json   |   16 +
 .../process/fdm_process_creality_common.json  |  104 +
 .../fdm_process_creality_common_0_2.json      |   20 +
 .../fdm_process_creality_common_0_25.json     |   20 +
 .../fdm_process_creality_common_0_3.json      |   19 +
 .../fdm_process_creality_common_0_5.json      |   19 +
 .../fdm_process_creality_common_0_6.json      |   19 +
 .../fdm_process_creality_common_0_8.json      |   20 +
 .../fdm_process_creality_common_1_0.json      |   20 +
 OrcaSlicer/system/Custom.json                 |  274 +++
 .../filament/Generic ABS @MyToolChanger.json  |   51 +
 .../filament/Generic ASA @MyToolChanger.json  |   51 +
 .../filament/Generic PA @MyToolChanger.json   |   51 +
 .../Generic PA-CF @MyToolChanger.json         |   51 +
 .../filament/Generic PC @MyToolChanger.json   |   52 +
 .../filament/Generic PETG @MyToolChanger.json |   52 +
 .../filament/Generic PLA @MyToolChanger.json  |   52 +
 .../Generic PLA-CF @MyToolChanger.json        |   52 +
 .../filament/Generic PVA @MyToolChanger.json  |   52 +
 .../filament/Generic TPU @MyToolChanger.json  |   19 +
 .../Custom/machine/MyKlipper 0.2 nozzle.json  |   26 +
 .../Custom/machine/MyKlipper 0.4 nozzle.json  |   20 +
 .../Custom/machine/MyKlipper 0.6 nozzle.json  |   26 +
 .../Custom/machine/MyKlipper 0.8 nozzle.json  |   26 +
 .../system/Custom/machine/MyKlipper.json      |   12 +
 .../Custom/machine/MyMarlin 0.4 nozzle.json   |   44 +
 .../system/Custom/machine/MyMarlin.json       |   12 +
 .../Custom/machine/MyRRF 0.4 nozzle.json      |   19 +
 OrcaSlicer/system/Custom/machine/MyRRF.json   |   12 +
 .../machine/MyToolChanger 0.2 nozzle.json     |   30 +
 .../machine/MyToolChanger 0.4 nozzle.json     |   24 +
 .../machine/MyToolChanger 0.6 nozzle.json     |   30 +
 .../machine/MyToolChanger 0.8 nozzle.json     |   30 +
 .../system/Custom/machine/MyToolChanger.json  |   12 +
 .../Custom/machine/fdm_klipper_common.json    |   60 +
 .../Custom/machine/fdm_machine_common.json    |  119 ++
 .../system/Custom/machine/fdm_rrf_common.json |  141 ++
 .../machine/fdm_toolchanger_common.json       |  189 ++
 .../process/0.08mm Extra Fine @MyKlipper.json |   19 +
 .../process/0.08mm Extra Fine @MyMarlin.json  |   11 +
 .../process/0.08mm Extra Fine @MyRRF.json     |   11 +
 .../0.08mm Extra Fine @MyToolChanger.json     |   19 +
 .../process/0.12mm Fine @MyKlipper.json       |   19 +
 .../Custom/process/0.12mm Fine @MyMarlin.json |   11 +
 .../Custom/process/0.12mm Fine @MyRRF.json    |   11 +
 .../process/0.12mm Fine @MyToolChanger.json   |   19 +
 .../process/0.15mm Optimal @MyKlipper.json    |   20 +
 .../process/0.15mm Optimal @MyMarlin.json     |   11 +
 .../Custom/process/0.15mm Optimal @MyRRF.json |   11 +
 .../0.15mm Optimal @MyToolChanger.json        |   20 +
 .../process/0.16mm Optimal @MyKlipper.json    |   20 +
 .../0.16mm Optimal @MyToolChanger.json        |   20 +
 .../process/0.20mm Standard @MyKlipper.json   |   14 +
 .../process/0.20mm Standard @MyMarlin.json    |   11 +
 .../process/0.20mm Standard @MyRRF.json       |   11 +
 .../0.20mm Standard @MyToolChanger.json       |   14 +
 .../process/0.24mm Draft @MyKlipper.json      |   17 +
 .../process/0.24mm Draft @MyMarlin.json       |   12 +
 .../Custom/process/0.24mm Draft @MyRRF.json   |   12 +
 .../process/0.24mm Draft @MyToolChanger.json  |   17 +
 .../0.28mm Extra Draft @MyKlipper.json        |   15 +
 .../process/0.28mm Extra Draft @MyMarlin.json |   12 +
 .../process/0.28mm Extra Draft @MyRRF.json    |   12 +
 .../0.28mm Extra Draft @MyToolChanger.json    |   15 +
 .../0.32mm Extra Draft @MyKlipper.json        |   17 +
 .../0.32mm Extra Draft @MyToolChanger.json    |   17 +
 .../0.40mm Extra Draft @MyKlipper.json        |   16 +
 .../0.40mm Extra Draft @MyToolChanger.json    |   16 +
 .../0.56mm Extra Draft @MyKlipper.json        |   15 +
 .../0.56mm Extra Draft @MyToolChanger.json    |   15 +
 .../Custom/process/fdm_process_common.json    |  108 +
 .../process/fdm_process_klipper_common.json   |   23 +
 .../process/fdm_process_marlin_common.json    |  108 +
 .../fdm_process_mytoolchanger_common.json     |   31 +
 .../process/fdm_process_rrf_common.json       |  109 +
 OrcaSlicer/system/OrcaFilamentLibrary.json    |  768 +++++++
 .../filament/AliZ/AliZ PA-CF @System.json     |    9 +
 .../filament/AliZ/AliZ PA-CF @base.json       |   77 +
 .../filament/AliZ/AliZ PETG @System.json      |    9 +
 .../filament/AliZ/AliZ PETG @base.json        |   56 +
 .../filament/AliZ/AliZ PETG-CF @System.json   |    8 +
 .../filament/AliZ/AliZ PETG-CF @base.json     |   74 +
 .../AliZ/AliZ PETG-Metal @System.json         |    9 +
 .../filament/AliZ/AliZ PETG-Metal @base.json  |   65 +
 .../filament/AliZ/AliZ PLA @System.json       |    9 +
 .../filament/AliZ/AliZ PLA @base.json         |   44 +
 .../filament/Bambu/Bambu ABS @System.json     |   24 +
 .../filament/Bambu/Bambu ABS @base.json       |   18 +
 .../filament/Bambu/Bambu ABS-GF @System.json  |   15 +
 .../filament/Bambu/Bambu ABS-GF @base.json    |   42 +
 .../filament/Bambu/Bambu ASA @System.json     |   18 +
 .../filament/Bambu/Bambu ASA @base.json       |   54 +
 .../Bambu/Bambu ASA-Aero @System.json         |    9 +
 .../filament/Bambu/Bambu ASA-Aero @base.json  |   63 +
 .../filament/Bambu/Bambu ASA-CF @System.json  |    9 +
 .../filament/Bambu/Bambu ASA-CF @base.json    |   62 +
 .../filament/Bambu/Bambu PA-CF @System.json   |   27 +
 .../filament/Bambu/Bambu PA-CF @base.json     |   39 +
 .../filament/Bambu/Bambu PA6-CF @System.json  |    9 +
 .../filament/Bambu/Bambu PA6-CF @base.json    |   48 +
 .../filament/Bambu/Bambu PA6-GF @System.json  |   21 +
 .../filament/Bambu/Bambu PA6-GF @base.json    |   45 +
 .../filament/Bambu/Bambu PAHT-CF @System.json |   12 +
 .../filament/Bambu/Bambu PAHT-CF @base.json   |   45 +
 .../filament/Bambu/Bambu PC @System.json      |   15 +
 .../filament/Bambu/Bambu PC @base.json        |   17 +
 .../filament/Bambu/Bambu PC FR @System.json   |   15 +
 .../filament/Bambu/Bambu PC FR @base.json     |   20 +
 .../filament/Bambu/Bambu PET-CF @System.json  |   15 +
 .../filament/Bambu/Bambu PET-CF @base.json    |   90 +
 .../Bambu/Bambu PETG Basic @System.json       |   18 +
 .../Bambu/Bambu PETG Basic @base.json         |   72 +
 .../filament/Bambu/Bambu PETG HF @System.json |   30 +
 .../filament/Bambu/Bambu PETG HF @base.json   |   77 +
 .../Bambu/Bambu PETG Translucent @System.json |   21 +
 .../Bambu/Bambu PETG Translucent @base.json   |   78 +
 .../filament/Bambu/Bambu PETG-CF @System.json |   30 +
 .../filament/Bambu/Bambu PETG-CF @base.json   |   77 +
 .../Bambu/Bambu PLA Aero @System.json         |   15 +
 .../filament/Bambu/Bambu PLA Aero @base.json  |   45 +
 .../Bambu/Bambu PLA Basic @System.json        |   18 +
 .../filament/Bambu/Bambu PLA Basic @base.json |   35 +
 .../Bambu/Bambu PLA Dynamic @System.json      |   18 +
 .../Bambu/Bambu PLA Dynamic @base.json        |   17 +
 .../Bambu/Bambu PLA Galaxy @System.json       |   15 +
 .../Bambu/Bambu PLA Galaxy @base.json         |   23 +
 .../Bambu/Bambu PLA Glow @System.json         |   15 +
 .../filament/Bambu/Bambu PLA Glow @base.json  |   26 +
 .../Bambu/Bambu PLA Impact @System.json       |   12 +
 .../Bambu/Bambu PLA Impact @base.json         |   17 +
 .../Bambu/Bambu PLA Marble @System.json       |   15 +
 .../Bambu/Bambu PLA Marble @base.json         |   20 +
 .../Bambu/Bambu PLA Matte @System.json        |   18 +
 .../filament/Bambu/Bambu PLA Matte @base.json |   32 +
 .../Bambu/Bambu PLA Metal @System.json        |   12 +
 .../filament/Bambu/Bambu PLA Metal @base.json |   24 +
 .../Bambu/Bambu PLA Silk @System.json         |    9 +
 .../filament/Bambu/Bambu PLA Silk @base.json  |   39 +
 .../Bambu/Bambu PLA Silk+ @System.json        |   15 +
 .../filament/Bambu/Bambu PLA Silk+ @base.json |   33 +
 .../Bambu/Bambu PLA Sparkle @System.json      |    9 +
 .../Bambu/Bambu PLA Sparkle @base.json        |   20 +
 .../Bambu/Bambu PLA Tough @System.json        |   12 +
 .../filament/Bambu/Bambu PLA Tough @base.json |   23 +
 .../Bambu/Bambu PLA Wood @System.json         |    9 +
 .../filament/Bambu/Bambu PLA Wood @base.json  |   32 +
 .../filament/Bambu/Bambu PLA-CF @System.json  |   24 +
 .../filament/Bambu/Bambu PLA-CF @base.json    |   50 +
 .../filament/Bambu/Bambu PPA-CF @System.json  |    9 +
 .../filament/Bambu/Bambu PPA-CF @base.json    |   12 +
 .../filament/Bambu/Bambu PPS-CF @base.json    |   39 +
 .../filament/Bambu/Bambu PVA @System.json     |   15 +
 .../filament/Bambu/Bambu PVA @base.json       |   33 +
 .../Bambu Support For PA PET @System.json     |   12 +
 .../Bambu/Bambu Support For PA PET @base.json |   36 +
 .../Bambu/Bambu Support For PLA @System.json  |    9 +
 .../Bambu/Bambu Support For PLA @base.json    |   33 +
 .../Bambu Support For PLA-PETG @System.json   |   21 +
 .../Bambu Support For PLA-PETG @base.json     |   60 +
 .../Bambu/Bambu Support G @System.json        |    9 +
 .../filament/Bambu/Bambu Support G @base.json |   39 +
 .../Bambu/Bambu Support W @System.json        |    9 +
 .../filament/Bambu/Bambu Support W @base.json |   33 +
 .../Bambu/Bambu Support for ABS @System.json  |   15 +
 .../Bambu/Bambu Support for ABS @base.json    |   39 +
 .../filament/Bambu/Bambu TPU 95A @System.json |   12 +
 .../filament/Bambu/Bambu TPU 95A @base.json   |   24 +
 .../Bambu/Bambu TPU 95A HF @System.json       |    9 +
 .../Bambu/Bambu TPU 95A HF @base.json         |   30 +
 .../filament/Generic ABS @System.json         |   11 +
 .../filament/Generic ASA @System.json         |   11 +
 .../filament/Generic BVOH @System.json        |    9 +
 .../filament/Generic EVA @System.json         |   10 +
 .../filament/Generic HIPS @System.json        |    9 +
 .../filament/Generic PA @System.json          |   11 +
 .../filament/Generic PA-CF @System.json       |   14 +
 .../filament/Generic PC @System.json          |   11 +
 .../filament/Generic PCTG @System.json        |    9 +
 .../filament/Generic PE @System.json          |   10 +
 .../filament/Generic PE-CF @System.json       |    9 +
 .../filament/Generic PETG @System.json        |   11 +
 .../filament/Generic PETG HF @System.json     |   12 +
 .../filament/Generic PETG-CF @System.json     |   24 +
 .../filament/Generic PHA @System.json         |   10 +
 .../filament/Generic PLA @System.json         |   10 +
 .../Generic PLA High Speed @System.json       |   19 +
 .../filament/Generic PLA Matte @System.json   |   15 +
 .../filament/Generic PLA Silk @System.json    |   16 +
 .../filament/Generic PLA-CF @System.json      |   17 +
 .../filament/Generic PP @System.json          |   10 +
 .../filament/Generic PP-CF @System.json       |   22 +
 .../filament/Generic PP-GF @System.json       |   22 +
 .../filament/Generic PPA-CF @System.json      |   21 +
 .../filament/Generic PPA-GF @System.json      |   16 +
 .../filament/Generic PVA @System.json         |   11 +
 .../filament/Generic SBS @System.json         |    9 +
 .../filament/Generic TPU @System.json         |   11 +
 .../Overture/Overture Matte PLA @System.json  |    9 +
 .../Overture/Overture Matte PLA @base.json    |   26 +
 .../Overture/Overture PLA @System.json        |    9 +
 .../filament/Overture/Overture PLA @base.json |   26 +
 .../Polymaker/Fiberon PA12-CF @System.json    |    9 +
 .../Polymaker/Fiberon PA12-CF @base.json      |   71 +
 .../Polymaker/Fiberon PA6-CF @System.json     |    9 +
 .../Polymaker/Fiberon PA6-CF @base.json       |   68 +
 .../Polymaker/Fiberon PA6-GF @System.json     |    9 +
 .../Polymaker/Fiberon PA6-GF @base.json       |   71 +
 .../Polymaker/Fiberon PA612-CF @System.json   |    9 +
 .../Polymaker/Fiberon PA612-CF @base.json     |   41 +
 .../Polymaker/Fiberon PET-CF @System.json     |    9 +
 .../Polymaker/Fiberon PET-CF @base.json       |   86 +
 .../Polymaker/Fiberon PETG-ESD @System.json   |   12 +
 .../Polymaker/Fiberon PETG-ESD @base.json     |   74 +
 .../Polymaker/Fiberon PETG-rCF @System.json   |    9 +
 .../Polymaker/Fiberon PETG-rCF @base.json     |   77 +
 .../Polymaker/PolyLite ABS @System.json       |    9 +
 .../Polymaker/PolyLite ABS @base.json         |   23 +
 .../Polymaker/PolyLite ASA @System.json       |    9 +
 .../Polymaker/PolyLite ASA @base.json         |   41 +
 .../Polymaker/PolyLite Dual PLA @System.json  |   10 +
 .../Polymaker/PolyLite PETG @System.json      |   15 +
 .../Polymaker/PolyLite PETG @base.json        |   59 +
 .../Polymaker/PolyLite PLA @System.json       |   12 +
 .../Polymaker/PolyLite PLA @base.json         |   17 +
 .../Polymaker/PolyTerra Dual PLA @System.json |   10 +
 .../Polymaker/PolyTerra PLA @System.json      |   13 +
 .../Polymaker/PolyTerra PLA @base.json        |   20 +
 .../SUNLU/SUNLU Marble PLA @System.json       |   15 +
 .../SUNLU/SUNLU Marble PLA @base.json         |   20 +
 .../filament/SUNLU/SUNLU PETG @System.json    |   18 +
 .../filament/SUNLU/SUNLU PETG @base.json      |   81 +
 .../SUNLU/SUNLU PLA Matte @System.json        |    9 +
 .../filament/SUNLU/SUNLU PLA Matte @base.json |   50 +
 .../SUNLU/SUNLU PLA+ 2.0 @System.json         |    9 +
 .../filament/SUNLU/SUNLU PLA+ 2.0 @base.json  |   44 +
 .../filament/SUNLU/SUNLU PLA+ @System.json    |    9 +
 .../filament/SUNLU/SUNLU PLA+ @base.json      |   44 +
 .../SUNLU/SUNLU Silk PLA+ @System.json        |    9 +
 .../filament/SUNLU/SUNLU Silk PLA+ @base.json |   51 +
 .../SUNLU/SUNLU Wood PLA @System.json         |    9 +
 .../filament/SUNLU/SUNLU Wood PLA @base.json  |   53 +
 .../filament/base/fdm_filament_abs.json       |   94 +
 .../filament/base/fdm_filament_asa.json       |   94 +
 .../filament/base/fdm_filament_bvoh.json      |   89 +
 .../filament/base/fdm_filament_common.json    |  187 ++
 .../filament/base/fdm_filament_eva.json       |   17 +
 .../filament/base/fdm_filament_hips.json      |   86 +
 .../filament/base/fdm_filament_pa.json        |   89 +
 .../filament/base/fdm_filament_pc.json        |   92 +
 .../filament/base/fdm_filament_pctg.json      |   68 +
 .../filament/base/fdm_filament_pe.json        |   89 +
 .../filament/base/fdm_filament_pet.json       |   68 +
 .../filament/base/fdm_filament_pha.json       |   89 +
 .../filament/base/fdm_filament_pla.json       |   89 +
 .../filament/base/fdm_filament_pla_silk.json  |   15 +
 .../filament/base/fdm_filament_pp.json        |   89 +
 .../filament/base/fdm_filament_ppa.json       |   95 +
 .../filament/base/fdm_filament_pps.json       |   85 +
 .../filament/base/fdm_filament_pva.json       |   97 +
 .../filament/base/fdm_filament_sbs.json       |   83 +
 .../filament/base/fdm_filament_tpu.json       |   82 +
 .../filament/eSUN/eSUN PETG @System.json      |    9 +
 .../filament/eSUN/eSUN PETG @base.json        |   54 +
 .../filament/eSUN/eSUN PLA+ @System.json      |    9 +
 .../filament/eSUN/eSUN PLA+ @base.json        |   26 +
 .../filament/eSUN/eSUN ePLA-LW @System.json   |   44 +
 .../filament/Arianeplast PETG @ Ender3k.info  |    5 +
 .../filament/Arianeplast PETG @ Ender3k.json  |   25 +
 .../Geeetech PLA @ Artillery SWX4P.info       |    5 +
 .../Geeetech PLA @ Artillery SWX4P.json       |   28 +
 .../filament/Geeetech PLA @ Ender3k.info      |    5 +
 .../filament/Geeetech PLA @ Ender3k.json      |   40 +
 .../Overture PETG @ Artillery SWX4P.info      |    5 +
 .../Overture PETG @ Artillery SWX4P.json      |   34 +
 .../Artillery SWX4 Pro 0.4 nozzle.info        |    5 +
 .../Artillery SWX4 Pro 0.4 nozzle.json        |   21 +
 ...ipper x Sprite Pro @ Speed 0.4 nozzle.info |    5 +
 ...ipper x Sprite Pro @ Speed 0.4 nozzle.json |   57 +
 ... Standard @Artillery SWX4P 0.4 nozzle.info |    5 +
 ... Standard @Artillery SWX4P 0.4 nozzle.json |   17 +
 .../0.20mm Standard @Creality Ender3K.info    |    5 +
 .../0.20mm Standard @Creality Ender3K.json    |   15 +
 OrcaSlicer/user/hints.cereal                  |  Bin 0 -> 12 bytes
 .../Geeetech PLA @ Artillery SWX4P.info       |    5 +
 .../Geeetech PLA @ Artillery SWX4P.json       |   31 +
 .../filament/Geeetech PLA @ Ender3.info       |    5 +
 .../filament/Geeetech PLA @ Ender3.json       |   22 +
 .../Overture PETG @ Artillery SWX4P.info      |    5 +
 .../Overture PETG @ Artillery SWX4P.json      |   31 +
 .../Artillery SWX4 Pro 0.4 nozzle.info        |    5 +
 .../Artillery SWX4 Pro 0.4 nozzle.json        |   17 +
 .../Creality Ender-3 Klipper 0.4 nozzle.info  |    5 +
 .../Creality Ender-3 Klipper 0.4 nozzle.json  |   36 +
 ...r-3 x Klipper x Sprite Pro 0.4 nozzle.info |    5 +
 ...r-3 x Klipper x Sprite Pro 0.4 nozzle.json |   36 +
 ...ipper x Sprite Pro @ Speed 0.4 nozzle.info |    5 +
 ...ipper x Sprite Pro @ Speed 0.4 nozzle.json |   44 +
 ...tillery SWX4 Pro 0.4 nozzle - Support.info |    5 +
 ...tillery SWX4 Pro 0.4 nozzle - Support.json |   17 +
 ...andard @Artillery SWX4 Pro 0.4 nozzle.info |    5 +
 ...andard @Artillery SWX4 Pro 0.4 nozzle.json |   14 +
 .../0.20mm Standard @Creality Ender3K.info    |    5 +
 .../0.20mm Standard @Creality Ender3K.json    |    9 +
 OrcaSlicer/user_backup-v2.3.0/hints.cereal    |  Bin 0 -> 12 bytes
 861 files changed, 56695 insertions(+)
 create mode 100644 OrcaSlicer/OrcaSlicer.conf
 create mode 100644 OrcaSlicer/README.md
 create mode 100644 OrcaSlicer/cache/12239093808561760700.lock
 create mode 100644 OrcaSlicer/cache/fonts.cereal
 create mode 100644 OrcaSlicer/log/debug_Fri_Aug_29_11_47_39_23452.log.0
 create mode 100644 OrcaSlicer/log/debug_Fri_Jun_20_09_35_25_88986.log.0
 create mode 100644 OrcaSlicer/log/debug_Fri_May_09_14_59_17_94315.log.0
 create mode 100644 OrcaSlicer/log/debug_Fri_May_09_15_20_57_3891.log.0
 create mode 100644 OrcaSlicer/log/debug_Fri_May_23_00_03_52_74776.log.0
 create mode 100644 OrcaSlicer/log/debug_Mon_Apr_28_18_47_36_2068.log.0
 create mode 100644 OrcaSlicer/log/debug_Mon_Jul_14_19_14_03_36525.log.0
 create mode 100644 OrcaSlicer/log/debug_Mon_Jun_02_16_55_04_10119.log.0
 create mode 100644 OrcaSlicer/log/debug_Mon_May_12_10_42_08_47265.log.0
 create mode 100644 OrcaSlicer/log/debug_Mon_May_26_14_00_43_43070.log.0
 create mode 100644 OrcaSlicer/log/debug_Sat_Aug_30_15_32_23_6220.log.0
 create mode 100644 OrcaSlicer/log/debug_Sat_Jul_05_00_09_33_97389.log.0
 create mode 100644 OrcaSlicer/log/debug_Sun_Aug_10_18_43_46_43696.log.0
 create mode 100644 OrcaSlicer/log/debug_Sun_Jun_08_17_34_11_78758.log.0
 create mode 100644 OrcaSlicer/log/debug_Sun_Jun_15_20_16_36_32856.log.0
 create mode 100644 OrcaSlicer/log/debug_Sun_Jun_29_15_32_43_31884.log.0
 create mode 100644 OrcaSlicer/log/debug_Thu_May_08_21_54_36_33220.log.0
 create mode 100644 OrcaSlicer/log/debug_Tue_Apr_29_17_25_23_1413.log.0
 create mode 100644 OrcaSlicer/log/debug_Tue_Aug_26_19_29_18_66247.log.0
 create mode 100644 OrcaSlicer/log/debug_Tue_Jul_15_15_27_39_68770.log.0
 create mode 100644 OrcaSlicer/log/debug_Tue_Jul_15_15_35_37_73979.log.0
 create mode 100644 OrcaSlicer/log/debug_Tue_May_06_00_31_32_68200.log.0
 create mode 100644 OrcaSlicer/log/debug_Tue_May_13_02_41_31_1104.log.0
 create mode 100644 OrcaSlicer/log/debug_Wed_May_07_09_38_04_45805.log.0
 create mode 100644 OrcaSlicer/log/debug_Wed_May_07_21_49_07_11611.log.0
 create mode 100644 OrcaSlicer/log/debug_Wed_May_14_11_14_13_15590.log.0
 create mode 100644 OrcaSlicer/log/debug_Wed_May_21_16_45_21_35443.log.0
 create mode 100644 OrcaSlicer/log/debug_Wed_May_21_16_48_07_36570.log.0
 create mode 100644 OrcaSlicer/log/debug_Wed_May_21_17_21_22_59768.log.0
 create mode 100644 OrcaSlicer/log/debug_Wed_Sep_03_11_36_15_47475.log.0
 create mode 100644 OrcaSlicer/printers/BL-P001.json
 create mode 100644 OrcaSlicer/printers/BL-P002.json
 create mode 100644 OrcaSlicer/printers/C11.json
 create mode 100644 OrcaSlicer/printers/C12.json
 create mode 100644 OrcaSlicer/printers/C13.json
 create mode 100644 OrcaSlicer/printers/N1.json
 create mode 100644 OrcaSlicer/printers/N2S.json
 create mode 100644 OrcaSlicer/printers/ams_load.gcode
 create mode 100644 OrcaSlicer/printers/ams_unload.gcode
 create mode 100644 OrcaSlicer/printers/filaments_blacklist.json
 create mode 100644 OrcaSlicer/printers/version.txt
 create mode 100644 OrcaSlicer/system/Artillery.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery ABS.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery Generic ABS.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery Generic ASA.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery Generic PETG.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery Generic PLA-CF.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery Generic PLA.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery Generic TPU.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery PETG.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery PLA Basic.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery PLA Matte.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery PLA Silk.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery PLA Tough.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/Artillery TPU.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/fdm_filament_abs.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/fdm_filament_asa.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/fdm_filament_common.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/fdm_filament_pet.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/fdm_filament_pla.json
 create mode 100644 OrcaSlicer/system/Artillery/filament/fdm_filament_tpu.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Genius 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Genius Pro.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Genius.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Hornet 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Hornet.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro.json
 create mode 100644 OrcaSlicer/system/Artillery/machine/fdm_machine_common.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.info
 create mode 100644 OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery Hornet.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X1.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius Pro.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Hornet.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X1.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X2.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.info
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery Hornet.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X1.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius Pro.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Artillery/process/fdm_process_common.json
 create mode 100644 OrcaSlicer/system/Creality.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ABS @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ABS @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ABS @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ABS.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ASA @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ASA @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ASA @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ASA-CF @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic ASA.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PA @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PA-CF.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PC @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PC.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PETG @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PETG @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PETG @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PETG-CF @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PETG.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA Wood @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic PLA.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-3V3-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic TPU @Hi-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic TPU @K1-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic TPU @K2-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Generic TPU.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality HF Generic PLA.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality HF Generic Speed PLA.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/Creality Silk PLA @Ender-5Max-all.json
 create mode 100644 OrcaSlicer/system/Creality/filament/fdm_filament_abs.json
 create mode 100644 OrcaSlicer/system/Creality/filament/fdm_filament_asa.json
 create mode 100644 OrcaSlicer/system/Creality/filament/fdm_filament_common.json
 create mode 100644 OrcaSlicer/system/Creality/filament/fdm_filament_pa.json
 create mode 100644 OrcaSlicer/system/Creality/filament/fdm_filament_pc.json
 create mode 100644 OrcaSlicer/system/Creality/filament/fdm_filament_pet.json
 create mode 100644 OrcaSlicer/system/Creality/filament/fdm_filament_pla.json
 create mode 100644 OrcaSlicer/system/Creality/filament/fdm_filament_tpu.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 Max.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 SE.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-10 V2.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 Max.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-6 SE.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-M4 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality CR-M4.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 S1.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V2.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3 V3.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-3.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Max.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019).json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5 S1.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5S 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-5S.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-6 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Ender-6.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Hi 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Hi 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Hi.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 (0.6 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 (0.8 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 Max (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 Max (0.6 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 Max (0.8 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 Max.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 SE 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1 SE.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1C 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1C 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1C 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K1C.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality K2 Plus.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Sermoon V1 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/machine/Creality Sermoon V1.json
 create mode 100644 OrcaSlicer/system/Creality/machine/fdm_creality_common.json
 create mode 100644 OrcaSlicer/system/Creality/machine/fdm_machine_common.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality CR-6 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-6 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-M4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10Max.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3KE.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.15mm Detail @Creality CR-M4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality CR10Max.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender3V2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10V2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Plus.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S1.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Sermoon V1.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-M4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10Max.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10V2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3KE.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Plus.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S1.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Sermoon V1.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10Max.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3KE.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality CR-6 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm Standard @Creality Sermoon V1.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.32mm Chunky @Creality CR-6 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.32mm Standard @Creality CR-6 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.36mm SuperChunky @Creality CR-6 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.40mm Draft @Creality CR-6 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.48mm Chunky @Creality CR-6 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.48mm Draft @Creality CR-6 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json
 create mode 100644 OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.56mm SuperChunky @Creality CR-6 0.8.json
 create mode 100644 OrcaSlicer/system/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_common.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_common_klipper.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_creality_common.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_2.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_25.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_3.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_5.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_6.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_8.json
 create mode 100644 OrcaSlicer/system/Creality/process/fdm_process_creality_common_1_0.json
 create mode 100644 OrcaSlicer/system/Custom.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic ABS @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic ASA @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic PA @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic PA-CF @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic PC @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic PETG @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic PLA @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic PLA-CF @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic PVA @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/filament/Generic TPU @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyKlipper 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyKlipper 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyKlipper 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyKlipper 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyMarlin 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyMarlin.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyRRF 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyRRF.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyToolChanger 0.2 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyToolChanger 0.4 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyToolChanger 0.6 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyToolChanger 0.8 nozzle.json
 create mode 100644 OrcaSlicer/system/Custom/machine/MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/machine/fdm_klipper_common.json
 create mode 100644 OrcaSlicer/system/Custom/machine/fdm_machine_common.json
 create mode 100644 OrcaSlicer/system/Custom/machine/fdm_rrf_common.json
 create mode 100644 OrcaSlicer/system/Custom/machine/fdm_toolchanger_common.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyMarlin.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyRRF.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.12mm Fine @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.12mm Fine @MyMarlin.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.12mm Fine @MyRRF.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.12mm Fine @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.15mm Optimal @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.15mm Optimal @MyMarlin.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.15mm Optimal @MyRRF.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.15mm Optimal @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.16mm Optimal @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.16mm Optimal @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.20mm Standard @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.20mm Standard @MyMarlin.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.20mm Standard @MyRRF.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.20mm Standard @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.24mm Draft @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.24mm Draft @MyMarlin.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.24mm Draft @MyRRF.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.24mm Draft @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyMarlin.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyRRF.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyKlipper.json
 create mode 100644 OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyToolChanger.json
 create mode 100644 OrcaSlicer/system/Custom/process/fdm_process_common.json
 create mode 100644 OrcaSlicer/system/Custom/process/fdm_process_klipper_common.json
 create mode 100644 OrcaSlicer/system/Custom/process/fdm_process_marlin_common.json
 create mode 100644 OrcaSlicer/system/Custom/process/fdm_process_mytoolchanger_common.json
 create mode 100644 OrcaSlicer/system/Custom/process/fdm_process_rrf_common.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ABS @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ASA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic BVOH @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic EVA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic HIPS @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PC @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PCTG @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG HF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PHA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-GF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PVA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic SBS @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic TPU @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite Dual PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra Dual PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @System.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @base.json
 create mode 100644 OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json
 create mode 100644 OrcaSlicer/user/default/filament/Arianeplast PETG @ Ender3k.info
 create mode 100644 OrcaSlicer/user/default/filament/Arianeplast PETG @ Ender3k.json
 create mode 100644 OrcaSlicer/user/default/filament/Geeetech PLA @ Artillery SWX4P.info
 create mode 100644 OrcaSlicer/user/default/filament/Geeetech PLA @ Artillery SWX4P.json
 create mode 100644 OrcaSlicer/user/default/filament/Geeetech PLA @ Ender3k.info
 create mode 100644 OrcaSlicer/user/default/filament/Geeetech PLA @ Ender3k.json
 create mode 100644 OrcaSlicer/user/default/filament/Overture PETG @ Artillery SWX4P.info
 create mode 100644 OrcaSlicer/user/default/filament/Overture PETG @ Artillery SWX4P.json
 create mode 100644 OrcaSlicer/user/default/machine/Artillery SWX4 Pro 0.4 nozzle.info
 create mode 100644 OrcaSlicer/user/default/machine/Artillery SWX4 Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/user/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.info
 create mode 100644 OrcaSlicer/user/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.json
 create mode 100644 OrcaSlicer/user/default/process/0.20mm Standard @Artillery SWX4P 0.4 nozzle.info
 create mode 100644 OrcaSlicer/user/default/process/0.20mm Standard @Artillery SWX4P 0.4 nozzle.json
 create mode 100644 OrcaSlicer/user/default/process/0.20mm Standard @Creality Ender3K.info
 create mode 100644 OrcaSlicer/user/default/process/0.20mm Standard @Creality Ender3K.json
 create mode 100644 OrcaSlicer/user/hints.cereal
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Artillery SWX4P.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Artillery SWX4P.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Ender3.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Ender3.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/filament/Overture PETG @ Artillery SWX4P.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/filament/Overture PETG @ Artillery SWX4P.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/machine/Artillery SWX4 Pro 0.4 nozzle.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/machine/Artillery SWX4 Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 Klipper 0.4 nozzle.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 Klipper 0.4 nozzle.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Creality Ender3K.info
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Creality Ender3K.json
 create mode 100644 OrcaSlicer/user_backup-v2.3.0/hints.cereal

diff --git a/OrcaSlicer/OrcaSlicer.conf b/OrcaSlicer/OrcaSlicer.conf
new file mode 100644
index 0000000..dc2eb3d
--- /dev/null
+++ b/OrcaSlicer/OrcaSlicer.conf
@@ -0,0 +1,359 @@
+{
+    "app": {
+        "allow_ip_resolve": true,
+        "auto_arrange": true,
+        "auto_calculate": true,
+        "auto_calculate_when_filament_change": true,
+        "auto_perspective": false,
+        "backup_interval": "10",
+        "backup_switch": true,
+        "camera_navigation_style": "0",
+        "check_stable_update_only": false,
+        "curr_bed_type": "4",
+        "dark_color_mode": "0",
+        "default_page": "0",
+        "developer_mode": false,
+        "download_path": "/Users/mbocquet/Downloads",
+        "drop_project_action": true,
+        "enable_multi_machine": false,
+        "enable_ssl_for_ftp": true,
+        "enable_ssl_for_mqtt": true,
+        "flush_multiplier": "1.000000",
+        "import_project_action": "2",
+        "internal_developer_mode": false,
+        "iot_environment": "3",
+        "keyboard_supported": "none/alt/control/shift",
+        "language": "en_GB",
+        "last_backup_path": "/var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_Sep_03/11_36_18#47475#49",
+        "last_export_path": "/Volumes/3D-Prints/Meta Quest",
+        "log_severity_level": "warning",
+        "max_recent_count": "18",
+        "max_send": "3",
+        "mouse_supported": "mouse left/mouse middle/mouse right",
+        "mouse_wheel": "0",
+        "move_view": "none/mouse left",
+        "open_device_tab_post_upload": true,
+        "precise_control": "none/mouse left",
+        "preset_folder": "",
+        "print_host_queue_dialog_column_0": "80",
+        "print_host_queue_dialog_column_1": "80",
+        "print_host_queue_dialog_column_2": "80",
+        "print_host_queue_dialog_column_3": "80",
+        "print_host_queue_dialog_column_4": "80",
+        "print_host_queue_dialog_column_5": "80",
+        "print_host_queue_dialog_height": "60",
+        "print_host_queue_dialog_width": "30",
+        "print_host_queue_dialog_x": "1520",
+        "print_host_queue_dialog_y": "687",
+        "privacy_version": "00.00.00.00",
+        "project_load_behaviour": "ask_when_relevant",
+        "region": "Europe",
+        "remember_printer_config": true,
+        "reverse_mouse_wheel_zoom": false,
+        "rotate_view": "none/mouse left",
+        "sending_interval": "5",
+        "show_3d_navigator": true,
+        "show_build_edgets": false,
+        "show_daily_tips": true,
+        "show_gcode_window": true,
+        "show_hints": true,
+        "show_home_page": true,
+        "show_model_mesh": false,
+        "show_model_shadow": true,
+        "show_outline": false,
+        "show_printable_box": true,
+        "show_splash_screen": true,
+        "single_instance": false,
+        "skip_version": "2.3.0.1-alpha",
+        "slicer_uuid": "6a0a36d7-e7fe-42e2-969d-4f44b3aed136",
+        "stealth_mode": true,
+        "sync_system_preset": true,
+        "sync_user_preset": false,
+        "toolkit_size": "100",
+        "units": "0",
+        "use_free_camera": false,
+        "use_inches": "0",
+        "use_perspective_camera": true,
+        "use_retina_opengl": true,
+        "user_mode": "advanced",
+        "version": "01.10.01.50",
+        "window_layout": "layout2|name=sidebar;caption=;state=1997;dir=4;layer=0;row=0;pos=0;prop=100000;bestw=549;besth=900;minw=-1;minh=-1;maxw=-1;maxh=-1;floatx=759;floaty=302;floatw=549;floath=919|name=main;caption=;state=256;dir=5;layer=0;row=0;pos=0;prop=100000;bestw=20;besth=20;minw=-1;minh=-1;maxw=-1;maxh=-1;floatx=-1;floaty=-1;floatw=-1;floath=-1|dock_size(5,0,0)=20|",
+        "window_mainframe": "8; 33; 3424; 1399; 0",
+        "zoom_to_mouse": false,
+        "zoom_view": "none/mouse left"
+    },
+    "arrange": {
+        "align_to_y_axis": true,
+        "allow_multi_materials_on_same_plate": false
+    },
+    "custom_color_list": {
+        "10": "0,0,0,0",
+        "11": "0,0,0,0",
+        "12": "0,0,0,0",
+        "13": "0,0,0,0",
+        "14": "0,0,0,0",
+        "15": "0,0,0,0",
+        "16": "0,0,0,0",
+        "17": "0,0,0,0",
+        "18": "0,0,0,0",
+        "19": "0,0,0,0",
+        "20": "0,0,0,0",
+        "21": "0,0,0,0",
+        "22": "0,0,0,0",
+        "23": "0,0,0,0",
+        "24": "0,0,0,0",
+        "25": "0,0,0,0"
+    },
+    "filaments": [
+        "Artillery ABS",
+        "Artillery PETG",
+        "Artillery PLA Basic",
+        "Artillery PLA Matte",
+        "Artillery PLA Silk",
+        "Artillery PLA Tough",
+        "Artillery TPU",
+        "Creality Generic ABS",
+        "Creality Generic ABS @Ender-3V3-all",
+        "Creality Generic ABS @Hi-all",
+        "Creality Generic ABS @K1-all",
+        "Creality Generic ABS @K2-all",
+        "Creality Generic ASA",
+        "Creality Generic ASA @Ender-3V3-all",
+        "Creality Generic ASA @Hi-all",
+        "Creality Generic ASA @K1-all",
+        "Creality Generic ASA @K2-all",
+        "Creality Generic PETG",
+        "Creality Generic PETG @Ender-3V3-all",
+        "Creality Generic PETG @Hi-all",
+        "Creality Generic PETG @K1-all",
+        "Creality Generic PETG @K2-all",
+        "Creality Generic PLA",
+        "Creality Generic PLA @Ender-3V3-all",
+        "Creality Generic PLA @Hi-all",
+        "Creality Generic PLA @K1-all",
+        "Creality Generic PLA @K2-all",
+        "Creality Generic PLA-CF",
+        "Creality Generic PLA-CF @Hi-all",
+        "Creality Generic PLA-CF @K1-all",
+        "Creality Generic PLA-CF @K2-all"
+    ],
+    "firstguide": {
+        "finish": true
+    },
+    "font": {
+        "active_font": "0"
+    },
+    "font:1": {
+        "depth": "1.000000",
+        "descriptor": "2;0;0;43;<plist version=\"1.0\"><dict><key>NSCTFontTraitsAttribute</key><dict><key>NSCTFontProportionTrait</key><real>0.0</real><key>NSCTFontWeightTrait</key><real>0.0</real></dict><key>NSFontFamilyAttribute</key><string>Helvetica</string><key>NSFontSizeAttribute</key><real>13</real></dict></plist>",
+        "line_height": "13.000000",
+        "name": "NORMAL"
+    },
+    "font:2": {
+        "depth": "1.000000",
+        "descriptor": "2;0;0;43;<plist version=\"1.0\"><dict><key>NSCTFontTraitsAttribute</key><dict><key>NSCTFontProportionTrait</key><real>0.0</real><key>NSCTFontWeightTrait</key><real>0.0</real></dict><key>NSFontFamilyAttribute</key><string>Helvetica</string><key>NSFontSizeAttribute</key><real>13</real></dict></plist>",
+        "line_height": "13.000000",
+        "name": "SWISS"
+    },
+    "header": "OrcaSlicer 2.3.0",
+    "models": [
+        {
+            "model": "Artillery Sidewinder X4 Pro",
+            "nozzle_diameter": "0.4",
+            "vendor": "Artillery"
+        },
+        {
+            "model": "Creality Ender-3",
+            "nozzle_diameter": "0.4",
+            "vendor": "Creality"
+        }
+    ],
+    "orca_presets": [
+        {
+            "curr_bed_type": "3",
+            "filament": "Artillery PLA Basic",
+            "filament_01": "Artillery PLA Basic",
+            "filament_02": "Artillery PLA Basic",
+            "filament_colors": "#808080,#00FF00,#C0C0C0",
+            "flush_volumes_matrix": "0.000000|357.000000|275.000000|219.000000|0.000000|400.000000|123.000000|281.000000|0.000000",
+            "flush_volumes_vector": "140.000000|140.000000|140.000000|140.000000|140.000000|140.000000",
+            "machine": "Artillery SWX4 Pro 0.4 nozzle",
+            "process": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Geeetech PLA @ Artillery SWX4P",
+            "filament_colors": "#26A69A",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Artillery Sidewinder X4 Pro 0.4 nozzle",
+            "process": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Bambu PLA Basic @BBL A1(klin-balum-2.3mf)",
+            "filament_colors": "#DDE5ED",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Bambu Lab A1 0.4 nozzle(klin-balum-2.3mf)",
+            "process": "0.12mm Fine @BBL A1(klin-balum-2.3mf)"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Bambu PLA Matte @BBL A1M(8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf)",
+            "filament_colors": "#FFFFFF",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Bambu Lab A1 mini 0.4 nozzle(8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf)",
+            "process": "0.16mm Optimal @BBL A1M(8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf)"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Bambu PLA Matte @BBL A1M(whistle_single_color(1).3mf)",
+            "filament_colors": "#042F56",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Bambu Lab A1 mini 0.4 nozzle(whistle_single_color(1).3mf)",
+            "process": "0.20mm Standard @BBL A1M(whistle_single_color(1).3mf)"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Bambu PLA Basic @BBL X1C(xtouch-batt-stl.3mf)",
+            "filament_01": "Bambu PLA Basic @BBL X1C(xtouch-base-stl.3mf)",
+            "filament_colors": "#439539,#000000",
+            "flush_volumes_matrix": "0.000000|132.000000|430.000000|0.000000",
+            "flush_volumes_vector": "140.000000|140.000000|140.000000|140.000000",
+            "machine": "Bambu Lab P1S 0.4 nozzle(xtouch-batt-stl.3mf)",
+            "process": "0.28mm Extra Draft @BBL X1C(xtouch-batt-stl.3mf)"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Bambu PLA Basic @BBL X1C(TOP GLASS RISER - V3 - P1(2).3mf)",
+            "filament_01": "Bambu PLA Basic @BBL X1C(TOP GLASS RISER - V3 - P1(2).3mf)",
+            "filament_02": "Bambu PLA Basic @BBL X1C(TOP GLASS RISER - V3 - P1(2).3mf)",
+            "filament_colors": "#808080,#00FF00,#C0C0C0",
+            "flush_volumes_matrix": "0.000000|357.000000|275.000000|219.000000|0.000000|400.000000|123.000000|281.000000|0.000000",
+            "flush_volumes_vector": "140.000000|140.000000|140.000000|140.000000|140.000000|140.000000",
+            "machine": "Bambu Lab X1 Carbon 0.4 nozzle(TOP GLASS RISER - V3 - P1(2).3mf)",
+            "process": "0.20mm Standard @BBL X1C(TOP GLASS RISER - V3 - P1(2).3mf)"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Bambu PLA Basic @BBL X1C(TOP GLASS RISER - V3 - P1.3mf)",
+            "filament_01": "Bambu PLA Basic @BBL X1C(TOP GLASS RISER - V3 - P1.3mf)",
+            "filament_02": "Bambu PLA Basic @BBL X1C(TOP GLASS RISER - V3 - P1.3mf)",
+            "filament_colors": "#808080,#00FF00,#C0C0C0",
+            "flush_volumes_matrix": "0.000000|357.000000|275.000000|219.000000|0.000000|400.000000|123.000000|281.000000|0.000000",
+            "flush_volumes_vector": "140.000000|140.000000|140.000000|140.000000|140.000000|140.000000",
+            "machine": "Bambu Lab X1 Carbon 0.4 nozzle(TOP GLASS RISER - V3 - P1.3mf)",
+            "process": "0.20mm Standard @BBL X1C(TOP GLASS RISER - V3 - P1.3mf)"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Creality Generic PLA",
+            "filament_colors": "#26A69A",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Creality Ender-3 0.4 nozzle",
+            "process": "0.20mm Standard @Creality Ender3 0.4"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Geeetech PLA @ Ender3",
+            "filament_colors": "#26A69A",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Creality Ender-3 Klipper 0.4 nozzle",
+            "process": "0.20mm Standard @Creality Ender3"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Creality Generic PLA",
+            "filament_colors": "#26A69A",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Creality Ender-3 Klipper 0.4 nozzle - Copy",
+            "process": "0.20mm Standard @Creality Ender3"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "Geeetech PLA @ Ender3",
+            "filament_colors": "#26A69A",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle",
+            "process": "0.20mm Standard @Creality Ender3"
+        },
+        {
+            "curr_bed_type": "3",
+            "filament": "AliZ PLA @System",
+            "filament_colors": "#26A69A",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Default Printer",
+            "process": "Default Setting"
+        },
+        {
+            "curr_bed_type": "4",
+            "filament": "Geeetech PLA @ Ender3k",
+            "filament_colors": "#18BDB0",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle",
+            "process": "0.20mm Standard @Creality Ender3K"
+        },
+        {
+            "curr_bed_type": "4",
+            "filament": "Geeetech PLA @ Ender3",
+            "filament_colors": "#26A69A",
+            "flush_volumes_matrix": "0.000000",
+            "flush_volumes_vector": "140.000000|140.000000",
+            "machine": "Ender-3 x Klipper x Sprite Pro @Speed 0.4 nozzle",
+            "process": "0.20mm Standard @Creality Ender3K"
+        },
+        {
+            "curr_bed_type": "4",
+            "filament": "Hyper PLA(Box-Bolt_CREALITY.3mf)",
+            "filament_01": "Hyper PLA(Box-Bolt_CREALITY.3mf)",
+            "filament_02": "Hyper PLA(Box-Bolt_CREALITY.3mf)",
+            "filament_03": "Hyper PLA(Box-Bolt_CREALITY.3mf)",
+            "filament_colors": "#ffff00,#0080c0,#c0c0c0,#ff8040",
+            "flush_volumes_matrix": "0.000000|280.000000|280.000000|280.000000|280.000000|0.000000|280.000000|280.000000|280.000000|280.000000|0.000000|280.000000|280.000000|280.000000|280.000000|0.000000",
+            "flush_volumes_vector": "140.000000|140.000000|140.000000|140.000000|140.000000|140.000000|140.000000|140.000000",
+            "machine": "K1C(Box-Bolt_CREALITY.3mf)",
+            "process": "0.20mm Standard@K1C(Box-Bolt_CREALITY.3mf)"
+        }
+    ],
+    "presets": {
+        "filaments": null,
+        "machine": "Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle"
+    },
+    "print": {
+        "bed_leveling": "1",
+        "flow_cali": "1",
+        "timelapse": "1"
+    },
+    "recent": {
+        "last_opened_folder": "/Volumes/3D-Prints/Star Realms Box",
+        "printhost_path": "",
+        "settings_folder": "/Users/mbocquet/Downloads"
+    },
+    "recent_projects": {
+        "01": "/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf",
+        "02": "/Users/mbocquet/Downloads/8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf",
+        "03": "/Volumes/3D-Prints/Meta Quest/Quest_Wall_Mount_V3.85.3mf",
+        "04": "/Volumes/3D-Prints/Skadis/Pince.3mf",
+        "05": "/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf",
+        "06": "/Users/mbocquet/Downloads/Jonsbo N2 NAS/Jonbson N2 NAS Adaptors.3mf",
+        "07": "/Users/mbocquet/Downloads/Jonsbo N2 NAS/2_5_to_3_5_Adapter_2mm.3mf",
+        "08": "/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf",
+        "09": "/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf",
+        "10": "/Users/mbocquet/Downloads/xtouch-batt-stl.3mf",
+        "11": "/Users/mbocquet/Downloads/headphone-holder-cable-hook-adapter-hole(1).3mf",
+        "12": "/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf",
+        "13": "/Users/mbocquet/Downloads/3+Hooks+Screwless+Mount.3mf",
+        "14": "/Users/mbocquet/Downloads/xbox-one-controller-holder-with-lip.3mf",
+        "15": "/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf",
+        "16": "/Users/mbocquet/Downloads/3-hooks(1).3mf"
+    }
+}
diff --git a/OrcaSlicer/README.md b/OrcaSlicer/README.md
new file mode 100644
index 0000000..bcc5427
--- /dev/null
+++ b/OrcaSlicer/README.md
@@ -0,0 +1,12 @@
+# Content
+
+This directory is the full configuration for OrcaSlicer.
+
+# Restore
+
+1. Open OrcaSlice program.
+2. Go to _Help_ > _Show configuration folder_ menu. A file browser window opens.
+3. Close OrcaSlicer program.
+3. In the file browser window that opened, **delete** the _OrcaSlicer_ folder.
+4. Replace the deleted folder with this one.
+5. Open OrcaSlice program. Done!
\ No newline at end of file
diff --git a/OrcaSlicer/cache/12239093808561760700.lock b/OrcaSlicer/cache/12239093808561760700.lock
new file mode 100644
index 0000000..e69de29
diff --git a/OrcaSlicer/cache/fonts.cereal b/OrcaSlicer/cache/fonts.cereal
new file mode 100644
index 0000000000000000000000000000000000000000..3a5ca627288058ca2ab2c8f9203d917762652d3e
GIT binary patch
literal 6377
zcmaJ_S##sK5uUBw_vTKjHdT1f%Z?|tn^#M=C65lPhMb*s-dZ9o!XyC&B<11$qNMUC
z^MPbHBzux^P1*R+IQsg~&Cg!FdiAe==lVZiJbX3z3<Lc8-SF$x<&H94b?VygJsowX
zme=VYcrMdrsZ~O@R#*B+miFY$FL<_~jurqjD(F|IV5&=VG<z!P#|)Qh0%`lBI9{7l
z|0E7m>|Er(WuVgD?8vILJLo5G8ts3^Q#K=9YUQkx-K`~~R%^N0;Q)z=Cxh$%lGpX%
zG$*^$zWen#>PqL;b>$w-x%kq|T$7vK&(Fk{CTZ<n?%HphT&Y1+t+hM9NYYhXSJt9H
zkpINCs}7q!x*zaS-cTuP!az+*+7)t@9-8Z|*H7Zi6HFz$+?C|d<=5oBd;0z98S0&D
zZ3fS;QZ;d9_W9Z5duw(sgT0fJyHunWuFhj9cmrrfSqq#0kk=ozHPLPT2*&x?$mtPM
zQ->?qT4&<Zu5EIJ%umPNCM$L2@=iPZn~2N_o>#A5cfMA4WyY#Pc9^*|qP}1o@A!tm
z-nPV{fYHKuvU@Dn;WsOciF=$|!#y0o6WZq)#RCz3Z>f50z1C5rbWUB!ohS?^IV3MQ
z#wLP264{q1bi3fh8f2%rZW^S;g_xz^;tGNsbA#Z9=n*HKgDF*T)3YrD*k<kXTctTw
zTkOCoI)On-_;}6XF#;fmJypQjaT9W-QOWdtoKD4>R2SMGLu!g2wDD~tCmCuNWaf)!
zKsptr&0bBZE}az-mpN<H*B25T41~C-o37NHt`nI_Dk{qz9coc&n7Z?pDs7uueCH`E
zbr*sv6My)&&XHr@92#T}2hkK(qwa()S?wuV4f~~tf8G{cRCrPw-RyE!4Om%h9r=u1
z7ZH_Q%Wgp|YisZ#^9AI5b+V1GoUJ0`hG|H%$)|3Y8!KnH%IpT7k9j_IhlBQqk{aRA
zsq?itk{Vb?F5_Bnv`20~@rGBoYjs)TJd4$*;EO!JqKfKWTXXbZ>75Ituhxi@{EuU<
zpP~)uU;k6R_gO1D%i{!BFd4=dD`++ZDI4p`WUgUjU707O)S`V5J{yoUZ%dF6A9CFu
za$Olx@28guNB0fo1y=8Q;~Vmnvym|{weaCh+khTf&)MYl-@knGrJ9(gq64p(QF(kc
z9Mv<eze9XP!kTFdO_^b4+WEa9kw!}OKK%Y@G`uk_$K?!!20o3JVCT)+M_jqV^O<t)
z2qb2c6G4HAc5$t*+9D56?@Q=pyHQHE;|tDDp0hyMu0gbbIygZh7U=`ncV?q4#Q02s
z(kZJuM=m(q-6ca%CsQ`kTvN6*R$qQ^G}2rf_9gy=9U^lL<Md>0dDIQc687O-j{riy
z)f`T9?RRZSwyplmXW&`c8|&~w`j*QCxOL5;Iu`+B@oEQ`OEDvJFkdbD@qz%V={jKw
zJCjzkiI~#qhY~p&_($|@w_7lvlsvcT%?WXF5qORU6$lj(2kdQipq)_nE$XmUnC5i2
zwI>YqmW(y*w0@vAtv?dGVsUXLf0E&t!&6XFEtMpOXHFW%@ohjs8Y)tRB-@G+2|vF3
zf*K?!N5+DVpf*dMqjRAj;;A_bQtZj>zv#!Zqbvb4$=`17WN(-4awuVCy#xC?)SSaB
z%5T$x;mBR01y6ByzSs&?ce`)JY_33s9F_6yR&L{w#!apd9LItB5|kAgo}Jl(H(pZi
zyjHVzNMEMGC5Xh>eXc{Qd;(0TY~Ljz;w6s5NDLOwz-tnf<!D_J;L&d!Fg-Tt$ciit
zQZytBrydG(hx!dj6xkY(dnACR>46w9V1xY!RAq^j7mTD)y>@31Q-MS?&FQmjD}!(`
z?C=#8Ei14>@6+LbD2&*-5fd}SrKKbW5)Ac`y3u9BS+vr&6w+O36h6yYqSiM|A1kx-
zu67U2$ad(R9yktGrq1cX$i;>sNT|$Ydxs8=orb=OcG6j`>byaBXGOFv8e)&E!T^Mj
zYyBKT-*FCog90~Ns<l$ruh11%6mp9roe{ATUu{j9))l`}>%g#R@?sgrIu0{Khs7a2
zV5`tSpvPji9MJwX=?gi&bB{mUKtG{UvtTgzG-d0q!NZl2N@DFA{p5U;cXCVDxKPTV
zXfZ?0!l4h@J|Svw0BkIm7kKfGEfPh?oOn4g8jbTYu2?VJ%M<Us=}3$qCng>G$KA`#
zQ}q3%+n?!_gdpP_{lv_8p}&kz;N7lqTZHx0RR^zYG<qj#|EK>ggzm(YU%Z$fo5hno
zxKfM<u}r@O-;k#x=dj6mrWfasyE`=KY&qk5vz@#G!&u^!ljN>O$}j<Krej~v=H4Vr
z6*>$%G8Ko?ChfmzoD8vX&A!8I7^3aLjhys~3=eHR-!q`WJ#yqY=GEMQZz$`iD73o%
zcnHjvsXHt5wgG*C=$%}M4jqzB^g=t)g^xu7<gPyCDB#!(8&l4N)iz++8`Q~azThMi
zXm$4jip8BsrBkN64T`IV_Nav$g@)L>LTgSRQ2)p9En@ACBv`vG@e!l1eOQ}!;3NF7
z#ooDH@q~|E{E#GRxNHp<@q#4n%R!EoB)$DsrB9)xiyeZ1p~{L2`x1pCDoMi=#coXq
zcYPU)J<Jci92sQ!HD=v<$&nS9>v~LH8&N4N?}M9P9R!s05(&z>Z7V#VK&v*cJi1N?
zU$eQA+--AH5PKxa@!{h{5B2ryzp+mfv$q>mekX-sVoFzueM}WBB8M4^-uAS9OGZTU
zOzvM8`R<sYyDo<>Svf+PgEH*gmy6GUR6b86Xwj(1r1eYC(6rUj;4RgSIIaJJ$D<U5
zQ6z=lq$i{>jODU?@KCuxj+1f(M38Np=FV=>P;-c+rqXrjt)U(Ic{XcmJU%BONK4{$
z?x7e=YHn<1m=~W<j&(d!@AGL~t1j@}m4mOJe;#~2I0hg4ug7{DoZWQLmg6PGrv+4H
zlhzg;H$+VG=W{F6UHH&AHckIuX4N-OpFU%llPjTz3B6`nI!>h2>utNk=QVuk6r0s;
zf%3wr%OSGHTfCT_oK16Jf1`bd4CAQzKsBlt4u=o)6q@c>mySRT%ny2-fi#71KVZ-U
ztb_pS;wAKk{qZf96=&rwBk`#FcBplD&3(J*TmidF=@1chkH&&y^}ZeK%C9Sr)nDIy
ybqK|QJcIXbXd6!S9f8wJ91a}>;@)8#Yw&;2;Xz$Nn=Lgp+c<!DqsIE+)qepJx_6!c

literal 0
HcmV?d00001

diff --git a/OrcaSlicer/log/debug_Fri_Aug_29_11_47_39_23452.log.0 b/OrcaSlicer/log/debug_Fri_Aug_29_11_47_39_23452.log.0
new file mode 100644
index 0000000..f9896ed
--- /dev/null
+++ b/OrcaSlicer/log/debug_Fri_Aug_29_11_47_39_23452.log.0
@@ -0,0 +1,35 @@
+[error]	2025-08-29 11:47:40.115948[Thread 0x000000020587e0c0]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-08-29 11:47:40.459490[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:40.474250[Thread 0x000000016d843000]:Unable to open the file/Users/mbocquet/Downloads/8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf
+[error]	2025-08-29 11:47:40.474265[Thread 0x000000016e05b000]:Unable to open the file/Users/mbocquet/Downloads/3+Hooks+Screwless+Mount.3mf
+[error]	2025-08-29 11:47:40.474274[Thread 0x000000016cc1f000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-08-29 11:47:40.474292[Thread 0x000000016e467000]:Unable to open the file/Users/mbocquet/Downloads/headphone-holder-cable-hook-adapter-hole(1).3mf
+[error]	2025-08-29 11:47:40.474299[Thread 0x000000016cc1f000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-08-29 11:47:40.474303[Thread 0x000000016e467000]:Unable to open the file/Users/mbocquet/Downloads/3-hooks(1).3mf
+[error]	2025-08-29 11:47:40.474312[Thread 0x000000016cc1f000]:Unable to open the file/Users/mbocquet/Downloads/PS4+Dualshock+4+Skadis+Mount+v3.3mf
+[error]	2025-08-29 11:47:40.474315[Thread 0x000000016d02b000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-08-29 11:47:40.474803[Thread 0x000000016e873000]:File Metadata/plate_1.png not found from archive
+[error]	2025-08-29 11:47:42.051387[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.191334[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.202651[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.213699[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.224123[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.234693[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.235065[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.235624[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.245684[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.256183[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:42.267236[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-08-29 11:47:42.341053[Thread 0x000000020587e0c0]:validate_preset: preset_name Bambu Lab X1 Carbon 0.4 nozzle, no inherit, set to not found
+[warning]	2025-08-29 11:47:42.341075[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1(2).3mf, found the printer preset not inherit from system
+[warning]	2025-08-29 11:47:42.341079[Thread 0x000000020587e0c0]:validate_preset: preset_name Bambu PLA Basic @BBL X1C, no inherit, set to not found
+[warning]	2025-08-29 11:47:42.341081[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1(2).3mf, found the filament 1 preset not inherit from system
+[warning]	2025-08-29 11:47:42.341085[Thread 0x000000020587e0c0]:validate_preset: preset_name Bambu PLA Basic @BBL X1C, no inherit, set to not found
+[warning]	2025-08-29 11:47:42.341087[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1(2).3mf, found the filament 2 preset not inherit from system
+[warning]	2025-08-29 11:47:42.341088[Thread 0x000000020587e0c0]:validate_preset: preset_name Bambu PLA Basic @BBL X1C, no inherit, set to not found
+[warning]	2025-08-29 11:47:42.341090[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1(2).3mf, found the filament 3 preset not inherit from system
+[warning]	2025-08-29 11:47:42.341091[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1(2).3mf, found self defined presets, count 2
+[error]	2025-08-29 11:47:46.839982[Thread 0x000000020587e0c0]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-08-29 11:47:47.146407[Thread 0x000000020587e0c0]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-08-29 11:47:47.174815[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:47:59.529107[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Fri_Jun_20_09_35_25_88986.log.0 b/OrcaSlicer/log/debug_Fri_Jun_20_09_35_25_88986.log.0
new file mode 100644
index 0000000..8771f5c
--- /dev/null
+++ b/OrcaSlicer/log/debug_Fri_Jun_20_09_35_25_88986.log.0
@@ -0,0 +1,110 @@
+[error]	2025-06-20 09:35:25.806152[Thread 0x000000020a7b1f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-06-20 09:35:26.124267[Thread 0x000000020a7b1f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-20 09:35:26.129183[Thread 0x000000016df1f000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf
+[error]	2025-06-20 09:35:26.129200[Thread 0x000000016eb43000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf
+[error]	2025-06-20 09:35:26.129205[Thread 0x000000016df1f000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-06-20 09:35:26.129210[Thread 0x000000016df1f000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-06-20 09:35:26.129213[Thread 0x000000016df1f000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-06-20 09:35:26.129330[Thread 0x000000016e32b000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-06-20 09:35:26.129349[Thread 0x000000016e32b000]:Unable to open the file/Volumes/3D-Prints/Skadis/Pince.3mf
+[error]	2025-06-20 09:35:26.129524[Thread 0x000000016d2fb000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-06-20 09:35:26.129780[Thread 0x000000016c2cb000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-06-20 09:35:26.129823[Thread 0x000000016d707000]:File Metadata/plate_1.png not found from archive
+[error]	2025-06-20 09:35:26.130189[Thread 0x000000016c6d7000]:File Metadata/plate_1.png not found from archive
+[warning]	2025-06-20 09:35:27.417418[Thread 0x000000020a7b1f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-06-20 09:35:27.417854[Thread 0x000000020a7b1f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-20 09:42:14.179851[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-20 09:42:14.185101[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-20 09:42:14.221088[Thread 0x000000016ceef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-06-20 09:42:14.246948[Thread 0x000000016e32b000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-20 09:42:14.266121[Thread 0x000000016eb43000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-20 09:42:14.290063[Thread 0x000000016d707000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-06-20 09:42:14.297164[Thread 0x000000016d707000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[error]	2025-06-24 17:03:46.961289[Thread 0x000000020a7b1f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-24 17:04:15.910016[Thread 0x000000016bc8f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-06-24 17:04:33.024436[Thread 0x000000016bc8f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-06-24 17:04:37.249334[Thread 0x000000016bc8f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-06-24 17:05:10.633520[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.638506[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.639120[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.654300[Thread 0x000000016d707000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.661611[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.661790[Thread 0x000000016c6d7000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.669007[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.675250[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.679828[Thread 0x000000016c6d7000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.692809[Thread 0x000000016c6d7000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.695053[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.711837[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.723242[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.738564[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.743490[Thread 0x000000016c6d7000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.754073[Thread 0x000000016c6d7000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.759424[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.764711[Thread 0x000000016c6d7000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.775186[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.782869[Thread 0x000000041f517000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.784803[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.786164[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.792728[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.795681[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.803581[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.803655[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.820598[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.820620[Thread 0x000000016c6d7000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.822073[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.823180[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.832771[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.834002[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.834322[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.835648[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.842864[Thread 0x000000016c6d7000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.845037[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.845224[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.846926[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.855257[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.863491[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.864284[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.865664[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.874732[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.875244[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.876556[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.885847[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.886090[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.888364[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.904684[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.921233[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.924670[Thread 0x000000016c2cb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.925822[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.932363[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.936134[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.943343[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.945807[Thread 0x000000016e737000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.949725[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.955031[Thread 0x000000016eb43000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.955279[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.964827[Thread 0x000000016cae3000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.966692[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.969960[Thread 0x000000016e737000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.972788[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.975206[Thread 0x000000016cae3000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.976662[Thread 0x000000016df1f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.977937[Thread 0x000000016eb43000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.985529[Thread 0x000000016cae3000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.993545[Thread 0x000000016d2fb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:10.997581[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.000544[Thread 0x000000016e32b000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.003254[Thread 0x000000016cae3000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.007868[Thread 0x000000016d2fb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.007958[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.013784[Thread 0x000000016cae3000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.018020[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.018031[Thread 0x000000016d2fb000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.028226[Thread 0x000000016db13000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.040957[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.052359[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.071816[Thread 0x000000041f517000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-06-24 17:05:11.092542[Thread 0x000000016eb43000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[error]	2025-06-24 17:05:13.223292[Thread 0x000000041f517000]:gcode path conflicts found between Quest_Wall_Mount_V3.8_Half_Bottom.STL and Quest_Wall_Mount_V3.8_Half_Top.STL
+[warning]	2025-06-24 17:05:22.640686[Thread 0x000000016bc8f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-06-26 10:11:45.984878[Thread 0x000000020a7b1f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Fri_May_09_14_59_17_94315.log.0 b/OrcaSlicer/log/debug_Fri_May_09_14_59_17_94315.log.0
new file mode 100644
index 0000000..5d1270a
--- /dev/null
+++ b/OrcaSlicer/log/debug_Fri_May_09_14_59_17_94315.log.0
@@ -0,0 +1,21 @@
+[error]	2025-05-09 14:59:18.350119[Thread 0x00000001fb998c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-09 14:59:18.673044[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:59:18.677569[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-05-09 14:59:18.677585[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-05-09 14:59:18.677589[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-05-09 14:59:18.677592[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-05-09 14:59:18.677595[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/WobbleX/WobbleX_TR8.3mf
+[error]	2025-05-09 14:59:18.677598[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount - UP.3mf
+[error]	2025-05-09 14:59:18.677601[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/Headphone_Stand.3mf
+[error]	2025-05-09 14:59:18.677604[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/Cable_management_hive_medium.3mf
+[error]	2025-05-09 14:59:18.677607[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/klin-balum-2.3mf
+[error]	2025-05-09 14:59:18.677611[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-05-09 14:59:18.677614[Thread 0x000000016df97000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-05-09 14:59:18.677754[Thread 0x000000016e3a3000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-09 14:59:18.677910[Thread 0x00000001fb998c80]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-09 14:59:18.683160[Thread 0x000000016efc7000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-09 14:59:19.807883[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:59:20.231711[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:59:20.260157[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 14:59:20.344638[Thread 0x00000001fb998c80]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-09 14:59:24.469278[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Fri_May_09_15_20_57_3891.log.0 b/OrcaSlicer/log/debug_Fri_May_09_15_20_57_3891.log.0
new file mode 100644
index 0000000..01d9c73
--- /dev/null
+++ b/OrcaSlicer/log/debug_Fri_May_09_15_20_57_3891.log.0
@@ -0,0 +1,27 @@
+[error]	2025-05-09 15:20:58.479167[Thread 0x00000001fb998c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-09 15:20:58.812132[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 15:20:58.816367[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-05-09 15:20:58.816380[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-05-09 15:20:58.816384[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-05-09 15:20:58.816387[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-05-09 15:20:58.816391[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/WobbleX/WobbleX_TR8.3mf
+[error]	2025-05-09 15:20:58.816394[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount - UP.3mf
+[error]	2025-05-09 15:20:58.816397[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/Headphone_Stand.3mf
+[error]	2025-05-09 15:20:58.816400[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/Cable_management_hive_medium.3mf
+[error]	2025-05-09 15:20:58.816403[Thread 0x000000016ebc3000]:Unable to open the file/Volumes/3D-Prints/klin-balum-2.3mf
+[error]	2025-05-09 15:20:58.816458[Thread 0x000000017040b000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-05-09 15:20:58.816464[Thread 0x000000016ffff000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-05-09 15:20:58.816811[Thread 0x00000001fb998c80]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-09 15:20:58.816858[Thread 0x000000016efcf000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-09 15:20:58.823357[Thread 0x000000016ebc3000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-09 15:20:59.948450[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 15:21:00.296294[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 15:21:00.316629[Thread 0x00000001fb998c80]:validate_preset: preset_name Bambu Lab A1 0.4 nozzle, no inherit, set to not found
+[warning]	2025-05-09 15:21:00.316645[Thread 0x00000001fb998c80]:validate_presets:file_name klin-balum-2.3mf, found the printer preset not inherit from system
+[warning]	2025-05-09 15:21:00.316651[Thread 0x00000001fb998c80]:validate_preset: preset_name Bambu PLA Basic @BBL A1, no inherit, set to not found
+[warning]	2025-05-09 15:21:00.316653[Thread 0x00000001fb998c80]:validate_presets:file_name klin-balum-2.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-05-09 15:21:00.316656[Thread 0x00000001fb998c80]:validate_presets:file_name klin-balum-2.3mf, found self defined presets, count 2
+[error]	2025-05-09 15:21:03.035967[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 15:21:03.173039[Thread 0x00000001fb998c80]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-09 15:21:06.479040[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 15:21:06.493446[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Fri_May_23_00_03_52_74776.log.0 b/OrcaSlicer/log/debug_Fri_May_23_00_03_52_74776.log.0
new file mode 100644
index 0000000..c2061b5
--- /dev/null
+++ b/OrcaSlicer/log/debug_Fri_May_23_00_03_52_74776.log.0
@@ -0,0 +1,83 @@
+[error]	2025-05-23 00:03:52.975318[Thread 0x00000001f6ffdf00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-23 00:03:53.267907[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 00:03:53.272816[Thread 0x000000016c7fb000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-05-23 00:03:53.272818[Thread 0x000000016c3ef000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-23 00:03:53.272891[Thread 0x000000016c7fb000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-05-23 00:03:53.272891[Thread 0x000000016d82b000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-05-23 00:03:53.272910[Thread 0x000000016d013000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf
+[error]	2025-05-23 00:03:53.272912[Thread 0x000000016c7fb000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-05-23 00:03:53.272911[Thread 0x000000016d82b000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf
+[error]	2025-05-23 00:03:53.272919[Thread 0x000000016c7fb000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-05-23 00:03:53.272919[Thread 0x000000016dc37000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-05-23 00:03:53.273145[Thread 0x000000016cc07000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-23 00:03:53.273413[Thread 0x000000016c7fb000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-23 00:03:53.273455[Thread 0x000000016d013000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-23 00:03:54.378791[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-23 00:03:54.393844[Thread 0x00000001f6ffdf00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-23 00:03:55.715213[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 00:03:55.801652[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 00:03:55.811664[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-23 09:26:14.866982[Thread 0x00000001f6ffdf00]:09:26:14: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-23 09:26:15.167354[Thread 0x00000001f6ffdf00]:09:26:15: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-23 10:02:14.016038[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:02:31.187592[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-23 10:02:35.526416[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-23 10:02:47.560627[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-23 10:03:19.366863[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:03:19.367327[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:03:19.367722[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:11:46.580305[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:11:46.581038[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:11:46.581717[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-23 10:12:10.749527[Thread 0x000000016bdb3000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-23 10:18:01.129299[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:18:01.130266[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:18:01.131154[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:19:01.898080[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:19:01.899356[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:19:01.900149[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 10:19:11.443800[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-23 11:44:32.490635[Thread 0x00000001f6ffdf00]:11:44:32: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-23 11:56:19.943844[Thread 0x00000001f6ffdf00]:11:56:19: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-23 12:26:52.940284[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-23 14:06:21.277542[Thread 0x000000016d41f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-05-23 14:06:21.297638[Thread 0x000000016e44f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[error]	2025-05-23 14:06:28.490306[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 14:06:36.078456[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-23 14:06:38.249024[Thread 0x000000016e85b000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-05-23 14:06:38.275290[Thread 0x000000016cc07000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[error]	2025-05-23 15:25:24.625239[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:25:24.718727[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:25:24.729092[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:25:24.738443[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:25:24.747465[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:45:03.749463[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:45:03.750460[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:45:03.751413[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:45:03.752487[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:45:14.207103[Thread 0x000000016f607000]:OctoPrint: Error getting version: curl:Couldn't connect to server:
+
+[Error 7], HTTP 0, body: ``
+[error]	2025-05-23 15:47:03.427471[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:47:03.428038[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:47:03.428420[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:47:03.428746[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:47:10.328365[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:47:10.329591[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:47:10.330476[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-23 15:47:10.331388[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-24 12:36:00.629849[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-24 12:36:00.633667[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-24 12:36:00.634320[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-24 12:36:00.634856[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-25 09:36:02.085275[Thread 0x00000001f6ffdf00]:09:36:02: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-26 08:05:16.119573[Thread 0x00000001f6ffdf00]:08:05:16: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-26 08:05:21.065713[Thread 0x00000001f6ffdf00]:08:05:21: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-26 08:05:23.627893[Thread 0x00000001f6ffdf00]:08:05:23: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-26 08:05:55.304900[Thread 0x00000001f6ffdf00]:08:05:55: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-26 08:11:45.485098[Thread 0x00000001f6ffdf00]:08:11:45: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-26 11:04:20.557025[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-26 11:04:20.559211[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-26 11:04:20.559674[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-26 11:04:20.560091[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-26 11:04:26.932149[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Mon_Apr_28_18_47_36_2068.log.0 b/OrcaSlicer/log/debug_Mon_Apr_28_18_47_36_2068.log.0
new file mode 100644
index 0000000..2f41f27
--- /dev/null
+++ b/OrcaSlicer/log/debug_Mon_Apr_28_18_47_36_2068.log.0
@@ -0,0 +1,18 @@
+[error]	2025-04-28 18:47:37.854340[Thread 0x00000001fefb0c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-04-28 18:47:38.186994[Thread 0x00000001fefb0c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-04-28 18:47:38.191543[Thread 0x00000001fefb0c80]:Unable to open the file/Volumes/3D-Prints/Garden Eye - Support/Garden Eye - Support.3mf
+[error]	2025-04-28 18:47:38.191579[Thread 0x0000000179e7f000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-04-28 18:47:38.191588[Thread 0x000000017925b000]:Unable to open the file/Volumes/3D-Prints/Cable_management_hive_medium.3mf
+[error]	2025-04-28 18:47:38.191645[Thread 0x000000017a28b000]:Unable to open the file/Volumes/3D-Prints/klin-balum-2.3mf
+[error]	2025-04-28 18:47:38.191646[Thread 0x0000000179e7f000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-04-28 18:47:38.191644[Thread 0x000000017925b000]:Unable to open the file/Volumes/3D-Prints/Headphone_Stand.3mf
+[error]	2025-04-28 18:47:38.191676[Thread 0x000000017aeaf000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-04-28 18:47:38.191677[Thread 0x0000000179a73000]:Unable to open the file/Volumes/3D-Prints/SpotPear 7" case/SpotPear 7" case.3mf
+[error]	2025-04-28 18:47:38.191681[Thread 0x0000000178a43000]:Unable to open the file/Users/mbocquet/Downloads/lpwkull_2.3mf
+[error]	2025-04-28 18:47:38.191678[Thread 0x000000017a697000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-04-28 18:47:38.191675[Thread 0x0000000179667000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount - UP.3mf
+[error]	2025-04-28 18:47:38.191688[Thread 0x0000000178e4f000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-04-28 18:47:38.191689[Thread 0x000000017aaa3000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/WobbleX/WobbleX_TR8.3mf
+[error]	2025-04-28 18:47:39.395140[Thread 0x00000001fefb0c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-04-28 18:47:39.411063[Thread 0x00000001fefb0c80]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-04-29 17:23:10.785555[Thread 0x00000001fefb0c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Mon_Jul_14_19_14_03_36525.log.0 b/OrcaSlicer/log/debug_Mon_Jul_14_19_14_03_36525.log.0
new file mode 100644
index 0000000..885aa59
--- /dev/null
+++ b/OrcaSlicer/log/debug_Mon_Jul_14_19_14_03_36525.log.0
@@ -0,0 +1,173 @@
+[error]	2025-07-14 19:14:04.002440[Thread 0x00000001fad41f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-07-14 19:14:04.316675[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:14:04.321290[Thread 0x000000016fe77000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-07-14 19:14:04.321307[Thread 0x000000016fe77000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-07-14 19:14:04.321399[Thread 0x000000016e223000]:File Metadata/plate_1.png not found from archive
+[error]	2025-07-14 19:14:04.321500[Thread 0x0000000178407000]:File Metadata/plate_1.png not found from archive
+[error]	2025-07-14 19:14:04.321595[Thread 0x000000016e223000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-07-14 19:14:06.240968[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 19:14:06.256824[Thread 0x00000001fad41f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-07-14 19:18:17.026603[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 19:19:03.194776[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":25.000000,"clearance_height_to_lid":25.000000,"clearance_radius":47.000000,"printable_height":250.000000,
+[error]	2025-07-14 19:19:04.944683[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:19:25.505583[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 19:19:46.150374[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":25.000000,"clearance_height_to_lid":25.000000,"clearance_radius":47.000000,"printable_height":250.000000,
+[error]	2025-07-14 19:20:10.092726[Thread 0x00000001fad41f00]:Download error: Failed to write and move.
+[error]	2025-07-14 19:20:12.523718[Thread 0x00000001fad41f00]:Download error: Failed to write and move.
+[error]	2025-07-14 19:21:04.620825[Thread 0x0000000457883000]:gcode path conflicts found between SR_Left_Disc.stl and SR_Logo.stl
+[warning]	2025-07-14 19:21:23.906156[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":25.000000,"clearance_height_to_lid":25.000000,"clearance_radius":47.000000,"printable_height":250.000000,
+[error]	2025-07-14 19:23:51.554391[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:23:51.555292[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:23:51.555844[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 19:23:59.766460[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:23:59.770429[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-14 19:40:04.768867[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:41:05.833265[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-14 19:44:24.499858[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 19:44:27.491659[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 19:44:29.422645[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:44:29.426872[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:47:34.550709[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 19:47:40.719498[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:47:40.730108[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:48:01.666910[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:48:01.682550[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-14 19:55:02.360095[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:55:02.361152[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:55:02.361965[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 19:55:29.368856[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:55:29.380073[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-14 19:58:35.525014[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:58:52.857509[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:58:52.858124[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:58:52.858544[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:58:55.513387[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:58:55.514029[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:58:55.514378[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 20:34:03.335556[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 20:34:03.346675[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-14 21:41:21.399373[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 21:41:30.715519[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":25.000000,"clearance_height_to_lid":25.000000,"clearance_radius":47.000000,"printable_height":250.000000,
+[error]	2025-07-14 21:41:35.341724[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 21:41:35.342854[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 21:41:35.343660[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 21:41:35.344326[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 00:45:09.972729[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 00:45:19.539954[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:45:27.494064[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:46:03.149120[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:46:05.715281[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:46:13.710651[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-15 00:51:14.254857[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 00:52:08.096446[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:52:17.883821[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-15 00:52:22.581051[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 00:52:27.353638[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:52:34.917868[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:52:46.323643[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:52:54.909370[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:53:15.620136[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-15 00:53:53.544254[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 00:53:53.546001[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 00:54:17.970860[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-15 00:54:31.220425[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 00:55:11.332014[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:55:24.943703[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:55:31.981115[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-15 00:58:35.131596[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 00:58:51.029582[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:58:53.831278[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 00:59:47.265874[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 00:59:47.420990[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:00:26.849145[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:00:27.004857[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:01:29.217089[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 01:01:33.999731[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:01:34.149685[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:01:34.299091[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:01:34.308544[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:01:56.990803[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:01:57.142468[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:01:57.291302[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:01:57.300932[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:02:48.337727[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:02:48.488541[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:02:48.637838[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:02:48.647700[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:03:29.044434[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:03:29.200300[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:03:29.349044[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:03:29.358556[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:05:36.106512[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:05:36.128883[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:05:36.132233[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:05:56.732424[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:05:56.770158[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:05:56.994440[Thread 0x000000016e62f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-07-15 01:05:57.756571[Thread 0x000000016f65f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-07-15 01:05:58.173065[Thread 0x000000016e62f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-07-15 01:06:16.104994[Thread 0x000000016ea3b000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-07-15 01:06:16.870193[Thread 0x000000016ea3b000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-07-15 01:06:17.285604[Thread 0x000000016f65f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[error]	2025-07-15 01:12:33.107807[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 01:12:33.109487[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 01:12:33.110570[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 01:12:33.111651[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 01:19:39.728022[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 01:19:54.738145[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 01:20:06.760951[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 01:20:22.561971[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 01:20:26.003492[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 01:20:42.897861[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 01:21:09.501048[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:21:09.540288[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:21:09.767239[Thread 0x000000016e223000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-07-15 01:21:10.534609[Thread 0x0000000178813000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-07-15 01:21:11.004476[Thread 0x000000016f253000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-07-15 01:21:23.969263[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:21:24.007247[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:21:59.899678[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:21:59.944136[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:22:05.346184[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:22:05.384998[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:22:45.442755[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:22:45.466060[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:22:45.469445[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:23:18.624586[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:23:18.639932[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:23:18.641109[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:24:42.897419[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:24:43.047323[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:24:43.194914[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:24:43.204362[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 01:27:42.502579[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 01:39:52.111234[Thread 0x00000001fad41f00]:01:39:52: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-15 09:14:03.690292[Thread 0x00000001fad41f00]:09:14:03: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-15 09:14:07.102545[Thread 0x00000001fad41f00]:09:14:07: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-07-15 09:32:58.068922[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-15 09:33:03.099022[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-15 09:33:05.578215[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-15 09:33:46.245456[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-15 09:33:47.647371[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-15 09:33:49.489625[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-15 09:33:52.874359[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-15 09:34:00.379907[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-15 09:34:04.214115[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-15 09:34:05.751529[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-15 09:34:26.703513[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:34:26.858991[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:34:27.014008[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:34:27.024332[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-15 09:34:28.229039[Thread 0x0000000457883000]:gcode path conflicts found between sungear(1).stl and ringgear(2).stl
+[warning]	2025-07-15 09:35:46.555855[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:35:46.710951[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:35:46.864892[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:35:46.875437[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-15 09:35:46.931665[Thread 0x0000000457883000]:gcode path conflicts found between sungear(1).stl and ringgear(2).stl
+[error]	2025-07-15 09:36:34.715445[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-15 09:36:37.869927[Thread 0x000000016dbe7000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 09:36:40.334001[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:36:40.496325[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:36:40.658476[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 09:36:40.668937[Thread 0x0000000457883000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-15 09:49:26.383025[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Mon_Jun_02_16_55_04_10119.log.0 b/OrcaSlicer/log/debug_Mon_Jun_02_16_55_04_10119.log.0
new file mode 100644
index 0000000..865ce1b
--- /dev/null
+++ b/OrcaSlicer/log/debug_Mon_Jun_02_16_55_04_10119.log.0
@@ -0,0 +1,41 @@
+[error]	2025-06-02 16:55:05.455518[Thread 0x00000001f6ffdf00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-06-02 16:55:05.803448[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-02 16:55:05.808504[Thread 0x00000001f6ffdf00]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-06-02 16:55:05.808611[Thread 0x000000016e32b000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-06-02 16:55:05.808616[Thread 0x000000016ef4f000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-06-02 16:55:05.808935[Thread 0x000000016e737000]:File Metadata/plate_1.png not found from archive
+[error]	2025-06-02 16:55:05.809148[Thread 0x000000016ceef000]:File Metadata/plate_1.png not found from archive
+[error]	2025-06-02 16:55:07.294779[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-02 16:55:07.557672[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-02 16:55:07.581903[Thread 0x00000001f6ffdf00]:validate_preset: preset_name Bambu Lab A1 mini 0.4 nozzle, no inherit, set to not found
+[warning]	2025-06-02 16:55:07.581927[Thread 0x00000001f6ffdf00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found the printer preset not inherit from system
+[warning]	2025-06-02 16:55:07.581932[Thread 0x00000001f6ffdf00]:validate_preset: preset_name Bambu PLA Matte @BBL A1M, no inherit, set to not found
+[warning]	2025-06-02 16:55:07.581933[Thread 0x00000001f6ffdf00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-06-02 16:55:07.581939[Thread 0x00000001f6ffdf00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found self defined presets, count 2
+[error]	2025-06-02 16:55:09.693336[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-02 16:55:09.880285[Thread 0x00000001f6ffdf00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-06-02 16:55:09.964467[Thread 0x000000016fed3000]:Error getting: `check_new_version_sf`: HTTP 403, 
+[error]	2025-06-02 16:55:22.122317[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-03 17:22:46.617167[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-04 18:00:04.905886[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-04 18:00:05.051686[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-04 18:00:05.069366[Thread 0x00000001f6ffdf00]:validate_preset: preset_name Bambu Lab A1 mini 0.4 nozzle, no inherit, set to not found
+[warning]	2025-06-04 18:00:05.069574[Thread 0x00000001f6ffdf00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found the printer preset not inherit from system
+[warning]	2025-06-04 18:00:05.069996[Thread 0x00000001f6ffdf00]:validate_preset: preset_name Bambu PLA Matte @BBL A1M, no inherit, set to not found
+[warning]	2025-06-04 18:00:05.070002[Thread 0x00000001f6ffdf00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-06-04 18:00:05.070006[Thread 0x00000001f6ffdf00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found self defined presets, count 2
+[error]	2025-06-04 18:00:07.610359[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-05 08:00:27.101544[Thread 0x00000001f6ffdf00]:08:00:27: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 09:17:22.388875[Thread 0x00000001f6ffdf00]:09:17:22: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 09:17:22.389251[Thread 0x00000001f6ffdf00]:09:17:22: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 11:37:50.584745[Thread 0x00000001f6ffdf00]:reslice: process_completed_with_error, return directly
+[error]	2025-06-05 11:37:52.687132[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-05 11:37:52.707171[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-05 11:40:33.897287[Thread 0x000000016c09b000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-06-05 11:41:26.829241[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:41:27.950765[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:49:02.552225[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-05 14:17:32.386467[Thread 0x00000001f6ffdf00]:14:17:32: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 14:17:37.089914[Thread 0x00000001f6ffdf00]:14:17:37: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 14:17:37.307106[Thread 0x00000001f6ffdf00]:14:17:37: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-06-05 14:30:08.100110[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Mon_May_12_10_42_08_47265.log.0 b/OrcaSlicer/log/debug_Mon_May_12_10_42_08_47265.log.0
new file mode 100644
index 0000000..994d041
--- /dev/null
+++ b/OrcaSlicer/log/debug_Mon_May_12_10_42_08_47265.log.0
@@ -0,0 +1,41 @@
+[error]	2025-05-12 10:42:09.117947[Thread 0x00000001fb998c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-12 10:42:09.460088[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 10:42:09.465188[Thread 0x000000016c1f7000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-05-12 10:42:09.465207[Thread 0x000000016d227000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/WobbleX/WobbleX_TR8.3mf
+[error]	2025-05-12 10:42:09.465264[Thread 0x000000016c1f7000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-05-12 10:42:09.465265[Thread 0x000000016de4b000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-05-12 10:42:09.465266[Thread 0x000000016d227000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount - UP.3mf
+[error]	2025-05-12 10:42:09.465279[Thread 0x000000016c1f7000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-05-12 10:42:09.465280[Thread 0x000000016d227000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-05-12 10:42:09.465280[Thread 0x000000016d633000]:Unable to open the file/Volumes/3D-Prints/klin-balum-2.3mf
+[error]	2025-05-12 10:42:09.465293[Thread 0x000000016c1f7000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-12 10:42:09.465296[Thread 0x000000016ca0f000]:Unable to open the file/Volumes/3D-Prints/Cable_management_hive_medium.3mf
+[error]	2025-05-12 10:42:09.465298[Thread 0x000000016c603000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-12 10:42:09.465290[Thread 0x000000016da3f000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-05-12 10:42:09.465288[Thread 0x000000016ea6f000]:Unable to open the file/Volumes/3D-Prints/Headphone_Stand.3mf
+[error]	2025-05-12 10:42:09.465551[Thread 0x00000001fb998c80]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-12 10:42:10.778437[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 10:42:11.010651[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 10:42:11.021462[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 10:42:11.032225[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-12 10:42:11.048348[Thread 0x00000001fb998c80]:can not find parent for config /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Mon_May_12/10_42_10#47265#51/_temp_2.config!
+[warning]	2025-05-12 10:42:11.060174[Thread 0x00000001fb998c80]:validate_preset: preset_name Bambu Lab P1S 0.4 nozzle, no inherit, set to not found
+[warning]	2025-05-12 10:42:11.060191[Thread 0x00000001fb998c80]:validate_presets:file_name xtouch-batt-stl.3mf, found the printer preset not inherit from system
+[warning]	2025-05-12 10:42:11.060195[Thread 0x00000001fb998c80]:validate_preset: preset_name Bambu PLA Basic @BBL X1C, no inherit, set to not found
+[warning]	2025-05-12 10:42:11.060197[Thread 0x00000001fb998c80]:validate_presets:file_name xtouch-batt-stl.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-05-12 10:42:11.060202[Thread 0x00000001fb998c80]:validate_preset: preset_name Bambu PLA Basic @BBL X1C(xtouch-base-stl.3mf), inherit_name Bambu PLA Basic @BBL X1C, can not found preset and inherit in list
+[warning]	2025-05-12 10:42:11.060204[Thread 0x00000001fb998c80]:validate_presets:file_name xtouch-batt-stl.3mf, found the filament 2 preset not inherit from system
+[warning]	2025-05-12 10:42:11.060206[Thread 0x00000001fb998c80]:validate_presets:file_name xtouch-batt-stl.3mf, found self defined presets, count 3
+[warning]	2025-05-12 10:42:13.933983[Thread 0x00000001fb998c80]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-12 10:42:28.416711[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 10:42:28.417403[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 10:42:28.417842[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-12 10:43:16.501107[Thread 0x000000016da3f000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[warning]	2025-05-12 10:43:16.513569[Thread 0x000000016e257000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-12 10:43:16.513707[Thread 0x000000016e663000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-12 10:43:20.010484[Thread 0x000000016ce1b000]:Detected missing Voronoi vertex, input polygons will be rotated back and forth.
+[error]	2025-05-12 18:02:39.143676[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 18:02:39.144637[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 18:02:43.385102[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-12 18:38:14.922162[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-13 02:32:32.359595[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Mon_May_26_14_00_43_43070.log.0 b/OrcaSlicer/log/debug_Mon_May_26_14_00_43_43070.log.0
new file mode 100644
index 0000000..538b969
--- /dev/null
+++ b/OrcaSlicer/log/debug_Mon_May_26_14_00_43_43070.log.0
@@ -0,0 +1,75 @@
+[error]	2025-05-26 14:00:44.582013[Thread 0x00000001f6ffdf00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-26 14:00:44.910075[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-26 14:00:44.915093[Thread 0x000000016bf3b000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-26 14:00:44.915461[Thread 0x000000016d783000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-26 14:00:44.915525[Thread 0x000000016cf6b000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-26 14:00:44.915741[Thread 0x000000016db8f000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-26 14:00:46.810679[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-26 14:00:46.827144[Thread 0x00000001f6ffdf00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-26 14:00:47.282324[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-26 14:00:52.460322[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-26 14:01:07.598787[Thread 0x000000016b8ff000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-26 16:17:48.651792[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-26 16:17:51.381109[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-26 16:17:51.572665[Thread 0x00000001f6ffdf00]:File Metadata/plate_1.png not found from archive
+[warning]	2025-05-27 19:55:49.122556[Thread 0x00000001f6ffdf00]:19:55:49: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-28 09:16:00.853282[Thread 0x00000001f6ffdf00]:09:16:00: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-28 09:16:01.258703[Thread 0x00000001f6ffdf00]:09:16:01: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-28 12:13:04.810041[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-28 14:01:47.918747[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-28 15:44:35.683101[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-28 15:57:28.124813[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-28 15:58:05.154739[Thread 0x000000016b8ff000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-28 16:09:58.419732[Thread 0x000000016b8ff000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-28 16:18:58.958062[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-28 17:38:31.716736[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-28 17:40:55.899164[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-28 17:41:06.170612[Thread 0x000000016b8ff000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-28 17:41:13.976982[Thread 0x000000016b8ff000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-28 17:42:55.873142[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-28 17:43:11.084693[Thread 0x000000016b8ff000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-28 23:11:44.292672[Thread 0x00000001f6ffdf00]:23:11:44: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-02 09:16:14.426372[Thread 0x00000001f6ffdf00]:09:16:14: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-02 09:16:19.063732[Thread 0x00000001f6ffdf00]:09:16:19: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-06-02 10:31:04.357696[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:26:55.387731[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:26:58.466389[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:26:58.527775[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:27:03.893145[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-02 11:27:18.010249[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:27:21.744457[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-06-02 11:27:24.693035[Thread 0x000000016b8ff000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-06-02 11:27:30.296503[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:28:06.256603[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:28:08.932436[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:28:13.589813[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:28:20.755949[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:28:33.338990[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 11:28:34.924506[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 16:41:03.100110[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 16:41:06.289812[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-02 16:41:13.529066[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-02 16:41:14.938317[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-06-02 16:41:16.104536[Thread 0x000000016b8ff000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-06-03 16:59:58.104870[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-03 17:00:09.753391[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-03 17:00:09.767478[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-03 17:00:24.216473[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-06-05 08:00:26.605641[Thread 0x00000001f6ffdf00]:08:00:26: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 09:17:22.237652[Thread 0x00000001f6ffdf00]:09:17:22: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 09:17:22.237858[Thread 0x00000001f6ffdf00]:09:17:22: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-06-05 11:31:52.943641[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:31:56.577509[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-05 11:32:00.447415[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:32:58.839323[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-05 11:33:06.162637[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:33:12.977692[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:34:04.996772[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:34:21.220180[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:34:35.265751[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-05 11:34:56.299350[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-06-05 14:17:32.387388[Thread 0x00000001f6ffdf00]:14:17:32: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 14:17:37.129143[Thread 0x00000001f6ffdf00]:14:17:37: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-05 14:17:37.335926[Thread 0x00000001f6ffdf00]:14:17:37: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-06-05 14:30:02.711935[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-05 14:30:02.729176[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
diff --git a/OrcaSlicer/log/debug_Sat_Aug_30_15_32_23_6220.log.0 b/OrcaSlicer/log/debug_Sat_Aug_30_15_32_23_6220.log.0
new file mode 100644
index 0000000..fbd7bbc
--- /dev/null
+++ b/OrcaSlicer/log/debug_Sat_Aug_30_15_32_23_6220.log.0
@@ -0,0 +1,23 @@
+[error]	2025-08-30 15:32:24.897564[Thread 0x000000020587e0c0]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-08-30 15:32:25.227500[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-30 15:32:25.236660[Thread 0x000000016e5df000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-08-30 15:32:25.236710[Thread 0x000000016e5df000]:Unable to open the file/Users/mbocquet/Downloads/3+Hooks+Screwless+Mount.3mf
+[error]	2025-08-30 15:32:25.236714[Thread 0x0000000410407000]:Unable to open the file/Users/mbocquet/Downloads/8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf
+[error]	2025-08-30 15:32:25.236731[Thread 0x000000016f203000]:Unable to open the file/Users/mbocquet/Downloads/headphone-holder-cable-hook-adapter-hole(1).3mf
+[error]	2025-08-30 15:32:25.236736[Thread 0x0000000410c1f000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-08-30 15:32:25.236742[Thread 0x000000016f203000]:Unable to open the file/Users/mbocquet/Downloads/3-hooks(1).3mf
+[error]	2025-08-30 15:32:25.236995[Thread 0x0000000410407000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-08-30 15:32:25.237207[Thread 0x000000016fa1b000]:File Metadata/plate_1.png not found from archive
+[error]	2025-08-30 15:32:26.690904[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-08-30 15:32:26.708504[Thread 0x000000020587e0c0]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-08-30 15:32:27.564695[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-30 15:32:29.836664[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-08-30 15:36:24.965382[Thread 0x000000016db97000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":25.000000,"clearance_height_to_lid":25.000000,"clearance_radius":47.000000,"printable_height":250.000000,
+[warning]	2025-08-31 12:05:18.260565[Thread 0x000000020587e0c0]:12:05:18: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-31 12:05:28.864294[Thread 0x000000020587e0c0]:12:05:28: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-31 15:34:08.135676[Thread 0x000000020587e0c0]:15:34:08: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-31 15:34:08.475300[Thread 0x000000020587e0c0]:15:34:08: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-09-01 09:17:25.669836[Thread 0x000000020587e0c0]:09:17:25: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-09-01 09:17:54.369980[Thread 0x000000020587e0c0]:09:17:54: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-09-01 09:17:54.783403[Thread 0x000000020587e0c0]:09:17:54: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-09-01 09:18:35.134581[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Sat_Jul_05_00_09_33_97389.log.0 b/OrcaSlicer/log/debug_Sat_Jul_05_00_09_33_97389.log.0
new file mode 100644
index 0000000..7a4e114
--- /dev/null
+++ b/OrcaSlicer/log/debug_Sat_Jul_05_00_09_33_97389.log.0
@@ -0,0 +1,134 @@
+[error]	2025-07-05 00:09:34.141960[Thread 0x00000001fad41f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-07-05 00:09:34.475410[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-05 00:09:34.480440[Thread 0x000000017599b000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-07-05 00:09:34.480823[Thread 0x0000000174d77000]:File Metadata/plate_1.png not found from archive
+[error]	2025-07-05 00:09:34.480976[Thread 0x0000000174d77000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-07-05 00:09:34.481079[Thread 0x000000017496b000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-07-05 00:09:34.481368[Thread 0x0000000174d77000]:File Metadata/plate_1.png not found from archive
+[error]	2025-07-05 00:09:36.066918[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-05 00:09:36.083772[Thread 0x00000001fad41f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-07-05 00:09:37.450377[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-05 00:10:15.074946[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-05 00:10:41.710254[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-05 11:22:55.731350[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-05 17:20:03.589706[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-05 17:20:14.984436[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-05 17:20:22.978351[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-05 17:20:26.201677[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-05 17:20:36.936323[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-05 17:20:50.977567[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 00:55:57.491738[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 00:56:15.157164[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 00:56:17.466278[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-06 01:22:03.137997[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-06 01:56:49.997893[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-06 01:57:29.621549[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 01:57:33.501438[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 01:57:35.900619[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 01:57:43.281004[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 11:46:04.727077[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-06 15:13:05.049123[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-06 15:29:59.259446[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-06 15:30:21.435902[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 15:39:55.124653[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-06 17:56:59.448711[Thread 0x00000001fad41f00]:17:56:59: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-06 17:57:01.731324[Thread 0x00000001fad41f00]:17:57:01: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-06 17:57:01.973251[Thread 0x00000001fad41f00]:17:57:01: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-06 17:57:03.982762[Thread 0x00000001fad41f00]:17:57:03: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-07-07 00:34:10.895389[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-07 00:34:54.553263[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-07 00:34:57.797209[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-07 01:46:46.242238[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-07 01:47:11.756373[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-07 01:47:40.490894[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-07 02:03:03.139634[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-07 02:11:07.266702[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-07 02:11:10.947305[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-07 02:17:32.746160[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-07 02:18:05.195971[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-07 02:18:25.819251[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-07 02:47:13.193417[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-07 03:05:42.127381[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-07 03:22:19.487875[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-07 03:25:31.410002[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-07 03:26:31.383041[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-07 03:56:24.052104[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-07 03:56:35.316073[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-07 04:08:36.822027[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-07 04:08:41.330797[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-07 04:08:41.384751[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-08 03:39:58.738812[Thread 0x00000001fad41f00]:03:39:58: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-08 09:08:00.775134[Thread 0x00000001fad41f00]:09:08:00: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-08 09:08:05.207324[Thread 0x00000001fad41f00]:09:08:05: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-07-08 09:08:38.951398[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-08 09:09:02.886046[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-08 09:09:08.134010[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-08 09:09:08.738530[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-08 09:09:29.107758[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-08 09:09:34.057795[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-08 09:09:43.105488[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-08 09:18:04.411248[Thread 0x00000001fad41f00]:09:18:04: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-08 09:18:05.131407[Thread 0x00000001fad41f00]:09:18:05: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-07-08 10:22:04.440880[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-08 10:22:21.139499[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-08 10:22:27.339837[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-08 10:23:27.334011[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-08 10:25:17.901881[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-08 10:25:20.581565[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-09 01:56:01.330595[Thread 0x00000001fad41f00]:01:56:01: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-09 09:13:49.777287[Thread 0x00000001fad41f00]:09:13:49: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-09 09:13:53.931033[Thread 0x00000001fad41f00]:09:13:53: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-10 08:31:35.781062[Thread 0x00000001fad41f00]:08:31:35: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-10 08:31:42.446978[Thread 0x00000001fad41f00]:08:31:42: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-10 08:31:47.277560[Thread 0x00000001fad41f00]:08:31:47: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-07-14 18:55:12.820881[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 18:55:28.399640[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 18:56:02.468779[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 18:56:32.979017[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-14 19:01:04.040121[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-14 19:01:33.124305[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 19:01:50.409269[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-14 19:02:17.896360[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:02:23.330226[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:02:24.846090[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-14 19:02:28.350286[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 19:02:31.193602[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-14 19:02:42.134341[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-14 19:02:44.055986[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-14 19:02:52.654879[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:04:02.679342[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:04:06.573711[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-14 19:04:09.749499[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:04:09.754704[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:04:09.758888[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:04:09.764567[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:04:09.775591[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:04:09.786145[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-14 19:04:51.852620[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:04:53.614289[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:04:56.209866[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:05:16.517399[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:05:26.813098[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-14 19:05:28.432397[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 19:05:31.493821[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-14 19:05:34.287056[Thread 0x000000017432f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-07-14 19:05:37.865767[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:05:53.031727[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-14 19:06:06.606996[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:06:09.765991[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:06:09.777237[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:06:58.580313[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:06:58.598347[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-14 19:07:55.509657[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-07-14 19:08:00.572802[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:08:00.585346[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:08:19.168094[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:08:19.174080[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-14 19:08:19.179886[Thread 0x000000044063b000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-14 19:08:40.644275[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:08:40.644935[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:08:40.645399[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-14 19:08:40.672416[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:08:40.699274[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:08:40.744636[Thread 0x00000001fad41f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-07-14 19:13:57.302293[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Sun_Aug_10_18_43_46_43696.log.0 b/OrcaSlicer/log/debug_Sun_Aug_10_18_43_46_43696.log.0
new file mode 100644
index 0000000..49de293
--- /dev/null
+++ b/OrcaSlicer/log/debug_Sun_Aug_10_18_43_46_43696.log.0
@@ -0,0 +1,33 @@
+[error]	2025-08-10 18:43:47.353113[Thread 0x000000020ac0e0c0]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-08-10 18:43:47.652760[Thread 0x000000020ac0e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-10 18:43:47.661645[Thread 0x000000040092b000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-08-10 18:43:47.661714[Thread 0x000000040195b000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-08-10 18:43:47.661730[Thread 0x000000040257f000]:Unable to open the file/Users/mbocquet/Downloads/PS4+Dualshock+4+Skadis+Mount+v3.3mf
+[error]	2025-08-10 18:43:47.661741[Thread 0x0000000401143000]:Unable to open the file/Users/mbocquet/Downloads/3-hooks(1).3mf
+[error]	2025-08-10 18:43:47.661760[Thread 0x0000000401143000]:Unable to open the file/Users/mbocquet/Downloads/3+Hooks+Screwless+Mount.3mf
+[error]	2025-08-10 18:43:47.661768[Thread 0x0000000401143000]:Unable to open the file/Users/mbocquet/Downloads/8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf
+[error]	2025-08-10 18:43:47.661774[Thread 0x0000000401143000]:Unable to open the file/Users/mbocquet/Downloads/headphone-holder-cable-hook-adapter-hole(1).3mf
+[error]	2025-08-10 18:43:47.662011[Thread 0x0000000402d97000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-08-10 18:43:47.662234[Thread 0x000000040154f000]:File Metadata/plate_1.png not found from archive
+[error]	2025-08-10 18:43:50.031427[Thread 0x000000020ac0e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-08-10 18:43:50.048405[Thread 0x000000020ac0e0c0]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-08-10 18:43:50.539547[Thread 0x000000020ac0e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-10 18:43:53.724216[Thread 0x000000020ac0e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-08-10 20:04:25.041464[Thread 0x0000000177e8b000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-08-10 20:04:30.130469[Thread 0x0000000177e8b000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-08-10 20:04:44.274521[Thread 0x000000020ac0e0c0]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-08-10 20:04:45.699936[Thread 0x000000020ac0e0c0]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-08-12 02:19:33.503521[Thread 0x000000020ac0e0c0]:02:19:33: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-12 09:16:54.395939[Thread 0x000000020ac0e0c0]:09:16:54: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-12 09:16:58.572835[Thread 0x000000020ac0e0c0]:09:16:58: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-13 09:12:07.588077[Thread 0x000000020ac0e0c0]:09:12:07: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-13 09:15:31.006459[Thread 0x000000020ac0e0c0]:09:15:30: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-13 09:15:35.663759[Thread 0x000000020ac0e0c0]:09:15:35: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-17 14:23:50.227568[Thread 0x000000020ac0e0c0]:14:23:50: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-17 18:16:11.950830[Thread 0x000000020ac0e0c0]:18:16:11: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-17 18:16:16.455507[Thread 0x000000020ac0e0c0]:18:16:16: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-18 00:38:44.834949[Thread 0x000000020ac0e0c0]:00:38:44: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-18 09:14:51.382898[Thread 0x000000020ac0e0c0]:09:14:51: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-18 09:14:55.755643[Thread 0x000000020ac0e0c0]:09:14:55: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-08-19 09:53:33.394753[Thread 0x000000020ac0e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-19 09:53:33.411529[Thread 0x000000020ac0e0c0]:tree_sel_change_delayedcan not find page with current selection 
diff --git a/OrcaSlicer/log/debug_Sun_Jun_08_17_34_11_78758.log.0 b/OrcaSlicer/log/debug_Sun_Jun_08_17_34_11_78758.log.0
new file mode 100644
index 0000000..cee24f1
--- /dev/null
+++ b/OrcaSlicer/log/debug_Sun_Jun_08_17_34_11_78758.log.0
@@ -0,0 +1,24 @@
+[error]	2025-06-08 17:34:12.607235[Thread 0x00000001f6ffdf00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-06-08 17:34:12.917947[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-08 17:34:12.923836[Thread 0x000000017954f000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-06-08 17:34:12.923867[Thread 0x000000017954f000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-06-08 17:34:12.924006[Thread 0x000000017892b000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-06-08 17:34:12.924270[Thread 0x000000017a57f000]:File Metadata/plate_1.png not found from archive
+[error]	2025-06-08 17:34:12.924670[Thread 0x000000017a57f000]:File Metadata/plate_1.png not found from archive
+[error]	2025-06-08 17:34:14.444443[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-08 17:34:14.459917[Thread 0x00000001f6ffdf00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-06-08 17:34:15.672634[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-08 17:34:52.716028[Thread 0x0000000178407000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-06-08 17:34:57.093213[Thread 0x0000000178407000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-06-08 21:43:19.325599[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-08 21:43:37.923556[Thread 0x0000000178407000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-06-08 21:44:17.391509[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-06-08 21:44:23.020526[Thread 0x00000001f6ffdf00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-06-08 21:44:44.594459[Thread 0x0000000178407000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-06-09 11:23:13.054353[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-09 11:23:29.723628[Thread 0x0000000178407000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-06-09 14:44:52.162855[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-11 09:08:13.099135[Thread 0x00000001f6ffdf00]:09:08:13: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-11 09:08:24.900805[Thread 0x00000001f6ffdf00]:09:08:24: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-11 09:08:28.923712[Thread 0x00000001f6ffdf00]:09:08:28: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-06-11 09:18:20.575676[Thread 0x00000001f6ffdf00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Sun_Jun_15_20_16_36_32856.log.0 b/OrcaSlicer/log/debug_Sun_Jun_15_20_16_36_32856.log.0
new file mode 100644
index 0000000..651b206
--- /dev/null
+++ b/OrcaSlicer/log/debug_Sun_Jun_15_20_16_36_32856.log.0
@@ -0,0 +1,17 @@
+[error]	2025-06-15 20:16:37.554927[Thread 0x000000020a7b1f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-06-15 20:16:37.864761[Thread 0x000000020a7b1f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-15 20:16:37.869759[Thread 0x0000000170be3000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-06-15 20:16:37.869798[Thread 0x0000000172837000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-06-15 20:16:37.869823[Thread 0x000000017201f000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-06-15 20:16:37.869828[Thread 0x0000000172837000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-06-15 20:16:37.869848[Thread 0x0000000171807000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-06-15 20:16:37.869850[Thread 0x0000000171c13000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf
+[error]	2025-06-15 20:16:37.869857[Thread 0x000000017304f000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf
+[error]	2025-06-15 20:16:37.869866[Thread 0x0000000171c13000]:Unable to open the file/Volumes/3D-Prints/Skadis/Pince.3mf
+[error]	2025-06-15 20:16:37.869866[Thread 0x000000017345b000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-06-15 20:16:37.870188[Thread 0x0000000172837000]:File Metadata/plate_1.png not found from archive
+[error]	2025-06-15 20:16:37.870416[Thread 0x000000017242b000]:File Metadata/plate_1.png not found from archive
+[error]	2025-06-15 20:16:39.092068[Thread 0x000000020a7b1f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-15 20:16:39.109374[Thread 0x000000020a7b1f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-06-15 20:16:39.806212[Thread 0x000000020a7b1f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-16 09:45:18.094195[Thread 0x000000020a7b1f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Sun_Jun_29_15_32_43_31884.log.0 b/OrcaSlicer/log/debug_Sun_Jun_29_15_32_43_31884.log.0
new file mode 100644
index 0000000..06d13e8
--- /dev/null
+++ b/OrcaSlicer/log/debug_Sun_Jun_29_15_32_43_31884.log.0
@@ -0,0 +1,45 @@
+[error]	2025-06-29 15:32:43.931791[Thread 0x00000001fad41f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-06-29 15:32:44.231449[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-06-29 15:32:44.236105[Thread 0x00000001fad41f00]:Unable to open the file/Volumes/3D-Prints/Meta Quest/Quest_Wall_Mount_V3.85.3mf
+[error]	2025-06-29 15:32:44.236148[Thread 0x000000016cc17000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf
+[error]	2025-06-29 15:32:44.236157[Thread 0x000000016cc17000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf
+[error]	2025-06-29 15:32:44.236156[Thread 0x000000016e053000]:Unable to open the file/Volumes/3D-Prints/Skadis/Pince.3mf
+[error]	2025-06-29 15:32:44.236331[Thread 0x000000016e053000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-06-29 15:32:44.236346[Thread 0x000000016e053000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-06-29 15:32:44.236350[Thread 0x000000016e053000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-06-29 15:32:44.236469[Thread 0x000000016d42f000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-06-29 15:32:44.236500[Thread 0x000000016e86b000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-06-29 15:32:44.236656[Thread 0x000000016c80b000]:File Metadata/plate_1.png not found from archive
+[error]	2025-06-29 15:32:44.237057[Thread 0x000000016dc47000]:File Metadata/plate_1.png not found from archive
+[warning]	2025-06-29 15:32:45.439628[Thread 0x00000001fad41f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-06-29 15:32:45.439993[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-06-29 17:32:28.509471[Thread 0x000000016bdc3000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-06-29 17:32:30.907930[Thread 0x000000016bdc3000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-06-29 17:32:32.985552[Thread 0x000000016c3ff000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-06-29 17:32:32.989575[Thread 0x000000016d83b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-06-29 17:32:32.989836[Thread 0x000000016c3ff000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-06-29 17:45:24.947376[Thread 0x000000016bdc3000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-06-30 09:11:24.835958[Thread 0x00000001fad41f00]:09:11:24: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-06-30 09:31:09.367000[Thread 0x00000001fad41f00]:09:31:09: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-02 01:07:50.591266[Thread 0x00000001fad41f00]:01:07:50: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-02 01:16:34.350444[Thread 0x00000001fad41f00]:01:16:34: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-02 01:16:34.350907[Thread 0x00000001fad41f00]:01:16:34: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-02 01:16:49.245113[Thread 0x00000001fad41f00]:01:16:49: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-02 01:16:52.061716[Thread 0x00000001fad41f00]:01:16:52: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-02 01:16:52.319068[Thread 0x00000001fad41f00]:01:16:52: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-07-02 01:30:58.368014[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-02 01:31:07.070725[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-02 01:31:20.100161[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-02 01:31:28.512637[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-02 01:31:36.452449[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-02 01:31:48.703414[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-02 01:31:59.119059[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-02 01:32:16.299413[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-02 01:33:14.757791[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-02 09:05:48.453809[Thread 0x00000001fad41f00]:09:05:48: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-02 09:08:59.451099[Thread 0x00000001fad41f00]:09:08:59: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-02 09:08:59.451738[Thread 0x00000001fad41f00]:09:08:59: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-03 21:54:36.246246[Thread 0x00000001fad41f00]:21:54:36: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-04 09:22:21.141356[Thread 0x00000001fad41f00]:09:22:21: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-07-04 09:22:25.230606[Thread 0x00000001fad41f00]:09:22:25: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-07-04 09:41:16.500824[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Thu_May_08_21_54_36_33220.log.0 b/OrcaSlicer/log/debug_Thu_May_08_21_54_36_33220.log.0
new file mode 100644
index 0000000..2fe134c
--- /dev/null
+++ b/OrcaSlicer/log/debug_Thu_May_08_21_54_36_33220.log.0
@@ -0,0 +1,642 @@
+[error]	2025-05-08 21:54:37.226115[Thread 0x00000001fb998c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-08 21:54:37.531646[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:54:39.091761[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-08 21:54:39.107766[Thread 0x00000001fb998c80]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-08 21:54:44.792610[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:54:53.096614[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:58:33.102845[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:58:51.550239[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:59:13.629757[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:59:21.449806[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:59:28.936814[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:59:31.487878[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 21:59:56.779405[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 22:00:00.841331[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 22:00:23.644674[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-08 22:00:28.841672[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-08 22:11:53.824368[Thread 0x00000001fb998c80]:22:11:53: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-09 09:07:48.575762[Thread 0x00000001fb998c80]:09:07:48: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-09 09:07:48.576124[Thread 0x00000001fb998c80]:09:07:48: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-09 09:24:46.528360[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:24:50.273388[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 09:25:06.426149[Thread 0x000000016de47000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-09 09:26:10.287903[Thread 0x000000016de47000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-09 09:26:43.504077[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:05.538275[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:06.030304[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:06.345959[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:06.599329[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:06.779686[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:07.066755[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:07.680028[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:08.026253[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:08.340774[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:08.537456[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:08.699769[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:08.849939[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:09.000519[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:09.164838[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:09.299459[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:09.481531[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:45.091981[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:27:45.571242[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:30:45.261157[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 09:30:50.660836[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 14:19:56.056653[Thread 0x00000001fb998c80]:14:19:56: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-09 14:20:13.493210[Thread 0x00000001fb998c80]:14:20:13: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-09 14:20:13.703019[Thread 0x00000001fb998c80]:14:20:13: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-09 14:20:29.898297[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:23:08.927408[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:23:41.083302[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:23:45.904917[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:24:55.860713[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:24:58.351337[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:24:58.440492[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:31:54.831525[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:31:57.039650[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 14:32:09.611628[Thread 0x000000016de47000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-09 14:39:41.054318[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 14:49:16.549146[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[error]	2025-05-09 14:51:11.491346[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:51:26.423813[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 14:51:26.554933[Thread 0x00000001fb998c80]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-09 14:52:26.762159[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:52:28.545948[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:52:29.520462[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:52:37.532245[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:52:38.456959[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:52:51.240101[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:52:55.351542[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:53:03.152048[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:53:03.617279[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:53:12.302846[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:53:12.935714[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:53:19.872156[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:53:20.580034[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:53:58.473549[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:53:59.958070[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:54:03.863747[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:54:09.610135[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:54:26.655516[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:54:31.408899[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:54:45.090641[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:54:45.949298[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:54:55.741345[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:55:01.649989[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:55:14.251346[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:55:14.944372[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:55:50.495257[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:56:06.468867[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:56:13.350729[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:56:14.175123[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:56:18.732085[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 14:56:49.685348[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 15:04:58.210832[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 15:04:58.423655[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 15:05:02.255533[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 15:05:13.657375[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 15:05:18.114874[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 15:05:29.099166[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 15:30:20.547858[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 15:30:54.425885[Thread 0x000000016de47000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-09 19:53:27.088412[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 19:53:58.232727[Thread 0x00000001fb998c80]:load_obj: failed to load mtl_path:/Users/mbocquet/Downloads/Cable sorter.mtl
+[warning]	2025-05-09 19:55:38.258777[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.259209[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.259209[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.259279[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.259304[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.259306[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.260135[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.260160[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.260642[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.260823[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.260895[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.261379[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.262797[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.262854[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.262957[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.263079[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.264512[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.264573[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.265948[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.266282[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.266298[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.266325[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.266526[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.266618[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.267372[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.267745[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.268202[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.268431[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.268633[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.268824[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.269347[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.269946[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.270214[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.271272[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.271645[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.271994[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.272624[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.272709[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.272955[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.273176[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.273998[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.274150[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.275262[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.276070[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.276105[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.277131[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.277216[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.278204[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.278617[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.278728[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.279802[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.280512[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.280542[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.280577[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.280788[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.280944[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.283321[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.283710[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.283856[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.284238[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.284318[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.284790[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.285242[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.285425[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.287657[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.287832[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.288248[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.288518[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.288772[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.289973[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.290164[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.291845[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.291873[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.292043[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.292334[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.292337[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.293707[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.295198[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.295436[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.296089[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.296135[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.296831[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.297439[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.297806[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.297940[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.297819[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.298547[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.298746[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.299898[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.300488[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.300679[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.301010[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.301129[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.301691[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.302078[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.303792[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.304170[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.304203[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.304643[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.304690[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.304725[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.305050[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.305138[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.305443[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.306070[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.307017[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.307899[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.308180[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.308235[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.308278[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.310027[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.310321[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.310908[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.311118[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.311396[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.311491[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.310069[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.311706[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.311776[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.311811[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.311852[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.313913[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.314118[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.315230[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.315454[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.315467[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.315475[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.315489[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.316287[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.316841[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.317796[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.317939[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.318173[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.318569[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.318740[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.319010[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.319017[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.319255[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.320391[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.320770[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.321564[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.321814[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.321969[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.322175[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.322386[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.322611[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.322613[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.322723[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.324079[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.324875[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.325157[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.325972[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.326353[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.326590[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.327190[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.327245[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.327314[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.327513[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.328274[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.328277[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.328823[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.329473[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.329550[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.330000[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.330873[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.330884[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.331114[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.331878[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.332338[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.332449[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.332698[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.333161[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.333818[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.334026[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.334525[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.334959[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.335439[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.335468[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.335933[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.335942[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.336621[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.336676[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.337723[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.338232[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.338339[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.338953[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.339069[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.339313[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.339474[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.340152[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.340400[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.340771[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.341260[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.342052[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.342915[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.343136[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.343140[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.343518[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.343673[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.344087[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.344306[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.344845[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.346240[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.346437[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.346630[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.346679[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.347046[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.347503[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.347614[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.348055[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.348450[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.349227[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.349559[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.349788[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.349886[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.350038[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.351738[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.351759[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.352015[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.352028[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.353296[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.353384[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.353415[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.353433[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.353464[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.354577[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.355155[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.355184[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.355303[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.355469[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.356656[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.356856[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.357070[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.358211[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.358526[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.358704[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.358743[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.358930[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.359300[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.360166[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.360315[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.360386[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.361603[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.362427[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.362491[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.362974[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.363605[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.363652[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.363703[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.363709[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.363917[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.363730[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.364166[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.365066[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.366294[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.367172[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.367173[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.367184[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.367548[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.367739[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.368333[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.368509[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.368723[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.368791[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.369558[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.370393[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.370467[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.370493[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.371577[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.371776[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.372087[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.372187[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.372725[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.373069[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.373104[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.373855[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.373893[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.373983[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.375033[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.375639[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.375648[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.375885[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.376363[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.376510[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.377235[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.377658[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.377827[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.378556[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.379044[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.379073[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.379336[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.379479[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.379490[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.380124[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.380686[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.380818[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.381209[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.381420[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.382465[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.382517[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.382964[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.383486[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.384053[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.384266[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.384855[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.385362[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.385749[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.385816[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.385829[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.386006[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.386538[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.386577[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.387307[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.388326[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.388863[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.389204[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.389216[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.389286[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.389665[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.390158[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.390254[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.390626[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.390819[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.391297[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.392123[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.392772[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.393662[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.393791[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.394006[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.394117[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.394689[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.394872[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.394988[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.395765[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.396381[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.396377[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.396560[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.397405[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.397514[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.397601[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.398348[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.398471[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.399217[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.399952[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.400263[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.400926[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.400960[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.400963[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.401108[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.401159[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.402657[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.402681[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.403244[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.403459[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.403605[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.403746[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.404333[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.404434[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.404452[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.404835[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.404938[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.406131[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.407014[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.407149[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.407282[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.407920[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.408066[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.408116[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.408490[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.408568[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.409568[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.410479[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.410792[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.411022[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.411311[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.411428[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.411699[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.411798[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.412037[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.412219[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.412956[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.413347[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.413953[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.414479[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.414786[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.415548[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.415772[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.416065[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.416130[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.416505[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.417108[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.417442[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.417750[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.418040[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.418510[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.419394[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.419517[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.419641[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.419715[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.420066[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.420107[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.420912[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.421183[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.422564[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.423193[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.423194[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.423519[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.423609[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.423709[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.423719[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.423764[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.424328[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.424519[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.426533[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.426635[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.426890[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.427012[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.427277[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.427429[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.427752[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.427928[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.429086[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.430089[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.430182[Thread 0x000000043dddf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.430467[Thread 0x000000016e483000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.430529[Thread 0x00000001700d7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.430567[Thread 0x00000001708ef000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.431013[Thread 0x00000001704e3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.431079[Thread 0x000000016ec9b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.431320[Thread 0x000000016e88f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.431428[Thread 0x000000016fccb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.431445[Thread 0x0000000170cfb000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.432663[Thread 0x000000016f8bf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.433425[Thread 0x000000016f4b3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-09 19:55:38.433543[Thread 0x000000016f0a7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[error]	2025-05-09 20:32:10.962707[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:00:50.560512[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-09 23:01:45.640576[Thread 0x00000001fb998c80]:restart_background_process, Line 5453: ui jobs running, return false
+[warning]	2025-05-09 23:01:46.444024[Thread 0x00000001fb998c80]:restart_background_process, Line 5453: ui jobs running, return false
+[warning]	2025-05-09 23:01:47.366785[Thread 0x00000001fb998c80]:restart_background_process, Line 5453: ui jobs running, return false
+[error]	2025-05-09 23:01:56.091763[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:01:56.713676[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:01:57.212699[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:02:15.341680[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:02:55.255619[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:02:56.052182[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:02:56.802417[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:03:36.388336[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:03:51.508252[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:03:55.239677[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:04:35.523224[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:04:37.355188[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:04:38.192365[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:04:40.685725[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:04:46.068392[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:04:54.073441[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:03.527927[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:04.695033[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:06.313698[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:08.256878[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:09.094451[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:09.921607[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:14.460926[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:18.543599[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-05-09 23:05:20.224010[Thread 0x000000016de47000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-09 23:05:23.817796[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:27.327274[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:27.764607[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:27.780757[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:27.973187[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:27.991499[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:28.152615[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:28.169201[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:28.346571[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:28.512019[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:28.534414[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:28.692863[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:28.871585[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:29.068872[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:29.248326[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:29.303803[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:29.472511[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:29.492051[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:29.652038[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:29.665506[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:29.846750[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:29.858322[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:30.044023[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:30.297786[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:30.509047[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:30.687910[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:30.868073[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:31.047637[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:31.243185[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:31.438800[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:31.632320[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:31.651325[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:31.827163[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:32.008412[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:32.022421[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:32.203750[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:32.383903[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:35.715094[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:36.692446[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:38.163405[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:56.853650[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:05:56.869305[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:05:58.053274[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:06:30.869462[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:06:40.632921[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:06:41.249623[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:06:41.300523[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:06:41.803739[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:06:42.178559[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:06:42.464129[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:06:47.508287[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-09 23:06:47.515398[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:06:53.641863[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:07:00.376522[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-09 23:07:08.554757[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-05-09 23:13:58.909318[Thread 0x00000001fb998c80]:23:13:58: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 11:43:27.301535[Thread 0x00000001fb998c80]:11:43:27: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 11:43:27.303109[Thread 0x00000001fb998c80]:11:43:27: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 11:54:13.258407[Thread 0x00000001fb998c80]:11:54:13: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 15:06:55.826703[Thread 0x00000001fb998c80]:15:06:55: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 15:06:55.826967[Thread 0x00000001fb998c80]:15:06:55: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-10 15:43:30.216492[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-10 15:56:43.598405[Thread 0x00000001fb998c80]:15:56:43: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 17:48:46.503844[Thread 0x00000001fb998c80]:17:48:46: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 17:48:46.534950[Thread 0x00000001fb998c80]:17:48:46: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 17:48:51.769350[Thread 0x00000001fb998c80]:17:48:51: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 17:48:52.089353[Thread 0x00000001fb998c80]:17:48:52: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-10 23:50:39.087161[Thread 0x00000001fb998c80]:23:50:39: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-11 00:03:37.880953[Thread 0x00000001fb998c80]:00:03:37: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-11 00:03:42.493695[Thread 0x00000001fb998c80]:00:03:42: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-11 00:39:48.683963[Thread 0x00000001fb998c80]:00:39:48: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-12 09:17:35.754713[Thread 0x00000001fb998c80]:09:17:35: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-12 09:17:40.286278[Thread 0x00000001fb998c80]:09:17:40: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-12 17:19:17.962759[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Tue_Apr_29_17_25_23_1413.log.0 b/OrcaSlicer/log/debug_Tue_Apr_29_17_25_23_1413.log.0
new file mode 100644
index 0000000..f5ac9f8
--- /dev/null
+++ b/OrcaSlicer/log/debug_Tue_Apr_29_17_25_23_1413.log.0
@@ -0,0 +1,137 @@
+[error]	2025-04-29 19:00:00.933877[Thread 0x00000001fb998c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-04-29 19:00:01.250092[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-04-29 19:00:01.256176[Thread 0x00000001fb998c80]:Unable to open the file/Volumes/3D-Prints/Garden Eye - Support/Garden Eye - Support.3mf
+[error]	2025-04-29 19:00:01.256196[Thread 0x000000017d4e7000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-04-29 19:00:01.256237[Thread 0x000000017d8f3000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount - UP.3mf
+[error]	2025-04-29 19:00:01.256245[Thread 0x000000017f13b000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-04-29 19:00:01.256246[Thread 0x000000017e10b000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/WobbleX/WobbleX_TR8.3mf
+[error]	2025-04-29 19:00:01.256245[Thread 0x000000017ed2f000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-04-29 19:00:01.256245[Thread 0x000000017e517000]:Unable to open the file/Volumes/3D-Prints/SpotPear 7" case/SpotPear 7" case.3mf
+[error]	2025-04-29 19:00:01.256253[Thread 0x000000017f547000]:Unable to open the file/Volumes/3D-Prints/Headphone_Stand.3mf
+[error]	2025-04-29 19:00:01.256253[Thread 0x000000017e923000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-04-29 19:00:01.256253[Thread 0x000000017d0db000]:Unable to open the file/Volumes/3D-Prints/Cable_management_hive_medium.3mf
+[error]	2025-04-29 19:00:01.256310[Thread 0x000000017cccf000]:Unable to open the file/Users/mbocquet/Downloads/lpwkull_2.3mf
+[error]	2025-04-29 19:00:01.256430[Thread 0x000000017e10b000]:Unable to open the file/Volumes/3D-Prints/klin-balum-2.3mf
+[error]	2025-04-29 19:00:01.256437[Thread 0x000000017d4e7000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-04-29 19:00:02.335312[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-04-29 19:00:02.351008[Thread 0x00000001fb998c80]:get_version, get_version not supported,return 00.00.00.00!
+[warning]	2025-04-29 19:00:05.307120[Thread 0x00000001fb998c80]:19:00:05: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-04-29 23:54:06.887537[Thread 0x00000001fb998c80]:23:54:06: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-04-29 23:54:06.887835[Thread 0x00000001fb998c80]:23:54:06: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-04-30 00:44:39.316731[Thread 0x00000001fb998c80]:00:44:39: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-04-30 07:51:50.776925[Thread 0x00000001fb998c80]:07:51:50: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-04-30 07:51:51.086926[Thread 0x00000001fb998c80]:07:51:51: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-02 08:25:44.777707[Thread 0x00000001fb998c80]:08:25:44: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-05 09:14:04.534108[Thread 0x00000001fb998c80]:09:14:04: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-05 09:14:04.534612[Thread 0x00000001fb998c80]:09:14:04: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-05 19:52:30.343309[Thread 0x00000001fb998c80]:19:52:30: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-05 23:46:08.757150[Thread 0x00000001fb998c80]:23:46:08: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-05 23:46:09.015847[Thread 0x00000001fb998c80]:23:46:09: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-06 00:21:30.326449[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-06 00:21:49.822084[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-06 00:22:06.530625[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-06 00:24:26.006695[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-06 00:24:41.946897[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-06 00:24:42.715419[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-06 00:24:55.652713[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-06 00:24:56.239108[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-06 00:25:05.249621[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-06 00:25:10.759737[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-06 00:25:24.213672[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-06 00:25:54.259778[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-06 00:25:54.275367[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-05-06 00:30:23.934250[Thread 0x00000001fb998c80]:00:30:23: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-06 00:30:55.917196[Thread 0x00000001fb998c80]:00:30:55: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-06 00:30:55.917515[Thread 0x00000001fb998c80]:00:30:55: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-06 00:32:06.563195[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-06 00:32:14.969772[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-06 00:32:33.426061[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-06 00:32:40.406714[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-05-06 00:34:07.190309[Thread 0x00000001fb998c80]:00:34:07: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-06 08:05:51.265741[Thread 0x00000001fb998c80]:08:05:51: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-06 08:05:51.266210[Thread 0x00000001fb998c80]:08:05:51: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-06 10:16:21.595010[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-06 10:17:51.392245[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-06 11:20:50.241373[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-06 11:20:52.134054[Thread 0x000000041f03f000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-05-06 11:20:52.147833[Thread 0x000000041f03f000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-05-06 11:21:03.659532[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-06 12:04:57.488007[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-06 20:11:08.347629[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-06 20:11:29.710737[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-06 20:11:43.141054[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-06 20:11:48.022182[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-06 23:01:17.012905[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-06 23:01:38.486007[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-06 23:01:45.467953[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-06 23:06:22.697832[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-06 23:06:54.628551[Thread 0x000000016f8af000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-06 23:22:17.766271[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-07 08:18:14.219545[Thread 0x000000017d0db000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.224988[Thread 0x000000017d8f3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.225576[Thread 0x000000017e923000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.243393[Thread 0x000000017f13b000]:Detected finite Voronoi vertex with non finite vertex, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.245500[Thread 0x000000017dcff000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.248516[Thread 0x000000017ed2f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.252130[Thread 0x000000017d8f3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.300294[Thread 0x000000017d8f3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.304408[Thread 0x000000017e923000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.310440[Thread 0x000000017f547000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.321177[Thread 0x000000017d8f3000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:18:14.340263[Thread 0x000000017f547000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.568609[Thread 0x000000017f547000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.571382[Thread 0x000000017d4e7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.574085[Thread 0x000000017e10b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.574698[Thread 0x000000041f03f000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.577811[Thread 0x000000017d0db000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.581868[Thread 0x000000017cccf000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.590489[Thread 0x000000017d4e7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.606638[Thread 0x000000017e10b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.612573[Thread 0x000000017d0db000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.617903[Thread 0x000000017d4e7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.628802[Thread 0x000000017d0db000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.635957[Thread 0x000000017dcff000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.640986[Thread 0x000000017d8f3000]:Detected finite Voronoi vertex with non finite vertex, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.660253[Thread 0x000000017d4e7000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.670017[Thread 0x000000017d0db000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.675118[Thread 0x000000017f547000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[warning]	2025-05-07 08:19:22.675364[Thread 0x000000017e10b000]:Detected non-planar Voronoi diagram, input polygons will be rotated back and forth.
+[error]	2025-05-07 09:30:55.413277[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:31:08.708368[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:31:13.841470[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:31:13.941759[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:31:28.147908[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:31:28.320873[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-07 09:31:28.338788[Thread 0x00000001fb998c80]:validate_preset: preset_name Bambu Lab A1 0.4 nozzle, no inherit, set to not found
+[warning]	2025-05-07 09:31:28.338803[Thread 0x00000001fb998c80]:validate_presets:file_name klin-balum-2.3mf, found the printer preset not inherit from system
+[warning]	2025-05-07 09:31:28.338808[Thread 0x00000001fb998c80]:validate_preset: preset_name Bambu PLA Basic @BBL A1, no inherit, set to not found
+[warning]	2025-05-07 09:31:28.338810[Thread 0x00000001fb998c80]:validate_presets:file_name klin-balum-2.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-05-07 09:31:28.338817[Thread 0x00000001fb998c80]:validate_presets:file_name klin-balum-2.3mf, found self defined presets, count 2
+[error]	2025-05-07 09:31:31.789850[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:31:58.532384[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:31:58.556308[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:31:58.668479[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:32:06.468655[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:32:06.636693[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:32:20.699895[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:32:21.025544[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:32:30.979648[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:32:31.132799[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:00.540077[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:00.659782[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:00.685950[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:11.813247[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:11.950838[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:22.576030[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:22.765164[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:22.774935[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:22.784589[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:22.810368[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:22.810820[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:22.811190[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:34.938922[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:35.095463[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:35.105905[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:44.712173[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:33:44.845023[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:34:15.897367[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Tue_Aug_26_19_29_18_66247.log.0 b/OrcaSlicer/log/debug_Tue_Aug_26_19_29_18_66247.log.0
new file mode 100644
index 0000000..3c25265
--- /dev/null
+++ b/OrcaSlicer/log/debug_Tue_Aug_26_19_29_18_66247.log.0
@@ -0,0 +1,44 @@
+[error]	2025-08-26 19:29:19.612224[Thread 0x000000020587e0c0]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-08-26 19:29:19.929452[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-26 19:29:19.934331[Thread 0x000000016cecf000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-08-26 19:29:19.934356[Thread 0x000000016daf3000]:Unable to open the file/Users/mbocquet/Downloads/headphone-holder-cable-hook-adapter-hole(1).3mf
+[error]	2025-08-26 19:29:19.934365[Thread 0x000000016e717000]:Unable to open the file/Users/mbocquet/Downloads/8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf
+[error]	2025-08-26 19:29:19.934366[Thread 0x000000016c6b7000]:Unable to open the file/Users/mbocquet/Downloads/3+Hooks+Screwless+Mount.3mf
+[error]	2025-08-26 19:29:19.934369[Thread 0x000000016e30b000]:Unable to open the file/Users/mbocquet/Downloads/3-hooks(1).3mf
+[error]	2025-08-26 19:29:19.934376[Thread 0x000000016daf3000]:Unable to open the file/Users/mbocquet/Downloads/PS4+Dualshock+4+Skadis+Mount+v3.3mf
+[error]	2025-08-26 19:29:19.934385[Thread 0x000000016daf3000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-08-26 19:29:19.934563[Thread 0x000000016d6e7000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-08-26 19:29:19.934735[Thread 0x000000016d2db000]:File Metadata/plate_1.png not found from archive
+[error]	2025-08-26 19:29:21.492408[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-08-26 19:29:21.508020[Thread 0x000000020587e0c0]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-08-26 19:29:44.211508[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-08-26 19:30:25.043099[Thread 0x000000016b863000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-08-27 09:14:35.811029[Thread 0x000000020587e0c0]:09:14:35: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-27 09:14:35.812962[Thread 0x000000020587e0c0]:09:14:35: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-08-27 09:14:39.247682[Thread 0x000000020587e0c0]:09:14:39: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-08-27 12:17:32.755083[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-27 12:20:36.776671[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-28 10:10:52.917555[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-28 12:37:57.234143[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:33.933380[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.074999[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.088634[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.100330[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.112325[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.123278[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.123740[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.124211[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.134744[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.146016[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-08-29 11:46:34.157380[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-08-29 11:46:34.190879[Thread 0x000000020587e0c0]:validate_preset: preset_name Bambu Lab X1 Carbon 0.4 nozzle, no inherit, set to not found
+[warning]	2025-08-29 11:46:34.191130[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1.3mf, found the printer preset not inherit from system
+[warning]	2025-08-29 11:46:34.191573[Thread 0x000000020587e0c0]:validate_preset: preset_name Bambu PLA Basic @BBL X1C, no inherit, set to not found
+[warning]	2025-08-29 11:46:34.191581[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-08-29 11:46:34.191586[Thread 0x000000020587e0c0]:validate_preset: preset_name Bambu PLA Basic @BBL X1C, no inherit, set to not found
+[warning]	2025-08-29 11:46:34.191588[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1.3mf, found the filament 2 preset not inherit from system
+[warning]	2025-08-29 11:46:34.191590[Thread 0x000000020587e0c0]:validate_preset: preset_name Bambu PLA Basic @BBL X1C, no inherit, set to not found
+[warning]	2025-08-29 11:46:34.191592[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1.3mf, found the filament 3 preset not inherit from system
+[warning]	2025-08-29 11:46:34.191594[Thread 0x000000020587e0c0]:validate_presets:file_name TOP GLASS RISER - V3 - P1.3mf, found self defined presets, count 2
+[error]	2025-08-29 11:46:37.339135[Thread 0x000000020587e0c0]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-08-29 11:47:19.622215[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Tue_Jul_15_15_27_39_68770.log.0 b/OrcaSlicer/log/debug_Tue_Jul_15_15_27_39_68770.log.0
new file mode 100644
index 0000000..696b246
--- /dev/null
+++ b/OrcaSlicer/log/debug_Tue_Jul_15_15_27_39_68770.log.0
@@ -0,0 +1,21 @@
+[error]	2025-07-15 15:27:40.598462[Thread 0x00000001fad41f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-07-15 15:27:40.913147[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:27:40.921687[Thread 0x000000016e663000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-07-15 15:27:40.921882[Thread 0x000000016ea6f000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-07-15 15:27:40.922264[Thread 0x000000016e257000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-07-15 15:27:40.922394[Thread 0x000000016ee7b000]:File Metadata/plate_1.png not found from archive
+[error]	2025-07-15 15:27:40.922539[Thread 0x000000016ca0f000]:File Metadata/plate_1.png not found from archive
+[error]	2025-07-15 15:27:42.393953[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 15:27:42.410245[Thread 0x00000001fad41f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-07-15 15:28:12.109008[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:28:12.259325[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 15:28:12.276869[Thread 0x00000001fad41f00]:validate_preset: preset_name Bambu Lab A1 mini 0.4 nozzle, no inherit, set to not found
+[warning]	2025-07-15 15:28:12.276885[Thread 0x00000001fad41f00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found the printer preset not inherit from system
+[warning]	2025-07-15 15:28:12.276890[Thread 0x00000001fad41f00]:validate_preset: preset_name Bambu PLA Matte @BBL A1M, no inherit, set to not found
+[warning]	2025-07-15 15:28:12.276892[Thread 0x00000001fad41f00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-07-15 15:28:12.276896[Thread 0x00000001fad41f00]:validate_presets:file_name 8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf, found self defined presets, count 2
+[error]	2025-07-15 15:28:15.043166[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:29:11.214283[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:29:11.236285[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:29:11.388731[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:30:01.806043[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Tue_Jul_15_15_35_37_73979.log.0 b/OrcaSlicer/log/debug_Tue_Jul_15_15_35_37_73979.log.0
new file mode 100644
index 0000000..c562522
--- /dev/null
+++ b/OrcaSlicer/log/debug_Tue_Jul_15_15_35_37_73979.log.0
@@ -0,0 +1,37 @@
+[error]	2025-07-15 15:35:37.875901[Thread 0x00000001fad41f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-07-15 15:35:38.223667[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:35:38.228459[Thread 0x000000016df23000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-07-15 15:35:38.228466[Thread 0x000000016e73b000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-07-15 15:35:38.228515[Thread 0x000000016ef53000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-07-15 15:35:38.229211[Thread 0x000000016eb47000]:File Metadata/plate_1.png not found from archive
+[error]	2025-07-15 15:35:38.229387[Thread 0x000000016d70b000]:File Metadata/plate_1.png not found from archive
+[warning]	2025-07-15 15:35:39.755855[Thread 0x00000001fad41f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-07-15 15:35:39.756292[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:36:03.912448[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 15:36:36.064742[Thread 0x000000016c4ab000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 15:36:48.301878[Thread 0x000000016c4ab000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-07-15 15:37:14.448079[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:37:14.457321[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:37:14.466806[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:37:14.475812[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:37:40.986419[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:37:41.001700[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:37:41.014749[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:37:41.026200[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:38:12.749919[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:38:12.761614[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:38:12.766649[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:39:40.304433[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:39:40.324157[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:39:40.331304[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:40:03.385572[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:40:03.396752[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:40:03.406983[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:40:03.417100[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-15 15:40:27.625516[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-07-15 15:40:27.626426[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-07-15 15:40:30.172037[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:40:30.181052[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:40:30.190361[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[warning]	2025-07-15 15:40:30.199781[Thread 0x000000041f843000]:SupportSpotsGenerator does not currently handle different materials properly, only first will be used
+[error]	2025-07-15 16:22:36.463108[Thread 0x00000001fad41f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Tue_May_06_00_31_32_68200.log.0 b/OrcaSlicer/log/debug_Tue_May_06_00_31_32_68200.log.0
new file mode 100644
index 0000000..7eedda4
--- /dev/null
+++ b/OrcaSlicer/log/debug_Tue_May_06_00_31_32_68200.log.0
@@ -0,0 +1,9 @@
+[error]	2025-05-06 00:31:33.018997[Thread 0x00000001fb998c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-06 00:31:33.330875[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-06 00:31:33.334844[Thread 0x00000001705cb000]:Unable to open the file/Users/mbocquet/Downloads/lpwkull_2.3mf
+[error]	2025-05-06 00:31:34.755508[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-06 00:31:35.012234[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-06 00:31:35.107714[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-06 00:31:35.201241[Thread 0x00000001fb998c80]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-06 00:31:45.811872[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-06 00:31:54.871249[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Tue_May_13_02_41_31_1104.log.0 b/OrcaSlicer/log/debug_Tue_May_13_02_41_31_1104.log.0
new file mode 100644
index 0000000..0d516c5
--- /dev/null
+++ b/OrcaSlicer/log/debug_Tue_May_13_02_41_31_1104.log.0
@@ -0,0 +1,25 @@
+[error]	2025-05-13 02:42:00.595781[Thread 0x00000002017b9f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-13 02:42:01.413823[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-13 02:42:01.428978[Thread 0x000000016eae7000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-05-13 02:42:01.429006[Thread 0x000000016eae7000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-05-13 02:42:01.429005[Thread 0x000000016eef3000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-05-13 02:42:01.429010[Thread 0x000000016eae7000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-05-13 02:42:01.429013[Thread 0x000000016eae7000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-05-13 02:42:01.429014[Thread 0x000000016eef3000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/WobbleX/WobbleX_TR8.3mf
+[error]	2025-05-13 02:42:01.429017[Thread 0x000000016eae7000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount - UP.3mf
+[error]	2025-05-13 02:42:01.429020[Thread 0x000000016eae7000]:Unable to open the file/Volumes/3D-Prints/Headphone_Stand.3mf
+[error]	2025-05-13 02:42:01.429023[Thread 0x000000016eae7000]:Unable to open the file/Volumes/3D-Prints/Cable_management_hive_medium.3mf
+[error]	2025-05-13 02:42:01.429110[Thread 0x000000016f2ff000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-13 02:42:01.429147[Thread 0x000000016f70b000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-13 02:42:01.429498[Thread 0x0000000318dd7000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-05-13 02:42:01.429858[Thread 0x000000016ff23000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-13 02:42:04.940590[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-13 02:42:04.961156[Thread 0x00000002017b9f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-13 02:47:53.888622[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-13 02:48:46.471839[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-13 03:06:00.916092[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-13 03:11:28.889914[Thread 0x00000002017b9f00]:03:11:28: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-13 09:15:15.988016[Thread 0x00000002017b9f00]:09:15:15: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-13 09:15:15.999061[Thread 0x00000002017b9f00]:09:15:15: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-13 09:27:28.336449[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-13 10:24:40.755002[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Wed_May_07_09_38_04_45805.log.0 b/OrcaSlicer/log/debug_Wed_May_07_09_38_04_45805.log.0
new file mode 100644
index 0000000..c8c0e24
--- /dev/null
+++ b/OrcaSlicer/log/debug_Wed_May_07_09_38_04_45805.log.0
@@ -0,0 +1,11 @@
+[error]	2025-05-07 09:38:05.293679[Thread 0x00000001fb998c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-07 09:38:05.607718[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:38:06.782928[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-07 09:38:06.799740[Thread 0x00000001fb998c80]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-07 09:38:09.399676[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:39:08.077055[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:39:08.234172[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:39:08.263482[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 09:39:39.294848[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 10:13:46.471831[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 12:36:12.299205[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Wed_May_07_21_49_07_11611.log.0 b/OrcaSlicer/log/debug_Wed_May_07_21_49_07_11611.log.0
new file mode 100644
index 0000000..20a300f
--- /dev/null
+++ b/OrcaSlicer/log/debug_Wed_May_07_21_49_07_11611.log.0
@@ -0,0 +1,12 @@
+[error]	2025-05-07 21:49:08.544960[Thread 0x00000001fb998c80]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-07 21:49:08.869804[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 21:49:10.026930[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-07 21:49:10.043686[Thread 0x00000001fb998c80]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-07 21:49:19.305450[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 21:53:34.237545[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-07 21:53:41.586298[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-07 21:56:15.740352[Thread 0x000000016fd3f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-07 21:58:48.376936[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-07 21:58:54.147298[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-08 21:53:48.150994[Thread 0x00000001fb998c80]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-08 21:54:07.405703[Thread 0x00000001fb998c80]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Wed_May_14_11_14_13_15590.log.0 b/OrcaSlicer/log/debug_Wed_May_14_11_14_13_15590.log.0
new file mode 100644
index 0000000..0a7e2fc
--- /dev/null
+++ b/OrcaSlicer/log/debug_Wed_May_14_11_14_13_15590.log.0
@@ -0,0 +1,221 @@
+[error]	2025-05-14 11:14:14.395131[Thread 0x00000002017b9f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-14 11:14:14.710122[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 11:14:14.716334[Thread 0x0000000175aaf000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-14 11:14:14.716617[Thread 0x00000002017b9f00]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-14 11:14:14.716937[Thread 0x00000002017b9f00]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-14 11:14:16.797876[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-14 11:14:16.815933[Thread 0x00000002017b9f00]:get_version, get_version not supported,return 00.00.00.00!
+[warning]	2025-05-14 11:15:00.731539[Thread 0x0000000174443000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":25.000000,"clearance_height_to_lid":25.000000,"clearance_radius":47.000000,"printable_height":250.000000,
+[warning]	2025-05-14 11:15:08.328899[Thread 0x0000000174443000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":25.000000,"clearance_height_to_lid":25.000000,"clearance_radius":47.000000,"printable_height":250.000000,
+[error]	2025-05-14 11:15:13.619184[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-14 11:15:30.998862[Thread 0x0000000174443000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-14 11:16:15.460633[Thread 0x0000000174443000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-14 11:16:25.827629[Thread 0x0000000174443000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-14 12:11:27.553805[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:11:27.690444[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/12_11_27#15590#216/_temp_3.config error, invalid json array for extruder
+[error]	2025-05-14 12:11:27.690690[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/12_11_27#15590#216/_temp_3.config error, invalid json type for machine
+[error]	2025-05-14 12:11:27.690834[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/12_11_27#15590#216/_temp_3.config error, invalid json type for process
+[error]	2025-05-14 12:11:27.819997[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:11:27.822644[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:11:27.825094[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:11:27.827831[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-14 12:11:27.846144[Thread 0x00000002017b9f00]:validate_preset: preset_name K1C, no inherit, set to not found
+[warning]	2025-05-14 12:11:27.846155[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the printer preset not inherit from system
+[warning]	2025-05-14 12:11:27.846166[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 12:11:27.846168[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-05-14 12:11:27.846171[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 12:11:27.846172[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 2 preset not inherit from system
+[warning]	2025-05-14 12:11:27.846174[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 12:11:27.846176[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 3 preset not inherit from system
+[warning]	2025-05-14 12:11:27.846177[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 12:11:27.846178[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 4 preset not inherit from system
+[warning]	2025-05-14 12:11:27.846180[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found self defined presets, count 2
+[error]	2025-05-14 12:11:32.562569[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:11:32.563054[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:11:32.563588[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:11:32.564354[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:11:32.721700[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:12:31.498160[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:12:31.528869[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:13:15.283808[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:13:31.132196[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:13:36.267591[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:14:33.969434[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:14:33.980672[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:14:49.009503[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:14:49.136272[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/12_14_49#15590#909/_temp_3.config error, invalid json array for extruder
+[error]	2025-05-14 12:14:49.136514[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/12_14_49#15590#909/_temp_3.config error, invalid json type for machine
+[error]	2025-05-14 12:14:49.136657[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/12_14_49#15590#909/_temp_3.config error, invalid json type for process
+[error]	2025-05-14 12:14:49.270348[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:14:49.272835[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:14:49.275088[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:14:49.277876[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-14 12:14:49.295237[Thread 0x00000002017b9f00]:validate_preset: preset_name K1C, no inherit, set to not found
+[warning]	2025-05-14 12:14:49.295251[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the printer preset not inherit from system
+[warning]	2025-05-14 12:14:49.295257[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 12:14:49.295260[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-05-14 12:14:49.295263[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 12:14:49.295265[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 2 preset not inherit from system
+[warning]	2025-05-14 12:14:49.295268[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 12:14:49.295270[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 3 preset not inherit from system
+[warning]	2025-05-14 12:14:49.295272[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 12:14:49.295274[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 4 preset not inherit from system
+[warning]	2025-05-14 12:14:49.295276[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found self defined presets, count 2
+[error]	2025-05-14 12:14:55.107948[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:14:55.108819[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:14:55.109571[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:14:55.110585[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:15:00.327568[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:15:00.328128[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:15:00.328679[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:15:00.329566[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:15:00.578980[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:15:00.611710[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:15:18.938008[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:15:19.852247[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:15:21.509843[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:15:22.284555[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:19:21.734039[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:20:27.348024[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:20:37.845120[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:20:43.320201[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:20:50.417871[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:20:50.939562[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:21:05.706225[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:21:08.101248[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:21:16.142670[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:21:19.134131[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:21:26.015854[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:21:34.422283[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:21:46.389017[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-05-14 12:22:09.824395[Thread 0x00000002017b9f00]:reslice: in slicing all, current plate 0 already sliced, skip to next
+[error]	2025-05-14 12:22:23.627126[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 12:24:46.123779[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:24:46.124907[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:24:46.126083[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:24:46.127778[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:24:57.402175[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:24:57.402771[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:24:57.403374[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 12:24:57.404313[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:16.042030[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:22.488560[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:22.612448[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/15_58_22#15590#1520/_temp_3.config error, invalid json array for extruder
+[error]	2025-05-14 15:58:22.612704[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/15_58_22#15590#1520/_temp_3.config error, invalid json type for machine
+[error]	2025-05-14 15:58:22.612854[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/15_58_22#15590#1520/_temp_3.config error, invalid json type for process
+[error]	2025-05-14 15:58:22.751329[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:22.753714[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:22.756211[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:22.758877[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-14 15:58:22.774870[Thread 0x00000002017b9f00]:validate_preset: preset_name K1C, no inherit, set to not found
+[warning]	2025-05-14 15:58:22.774884[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the printer preset not inherit from system
+[warning]	2025-05-14 15:58:22.774905[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 15:58:22.774907[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-05-14 15:58:22.774911[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 15:58:22.774912[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 2 preset not inherit from system
+[warning]	2025-05-14 15:58:22.774914[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 15:58:22.774916[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 3 preset not inherit from system
+[warning]	2025-05-14 15:58:22.774918[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 15:58:22.774919[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 4 preset not inherit from system
+[warning]	2025-05-14 15:58:22.774920[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found self defined presets, count 2
+[error]	2025-05-14 15:58:23.801179[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:23.801785[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:23.802444[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:23.803324[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:23.969070[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 15:58:29.105911[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:29.106987[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:29.108182[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:29.109917[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 15:58:29.387107[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 15:58:29.428293[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 15:59:27.488063[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 15:59:32.590231[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 15:59:49.898992[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 15:59:53.292637[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 15:59:58.050509[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:00:31.934188[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:00:33.576710[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:00:49.888193[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:00:58.702430[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:09.938254[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:13.618273[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:13.769320[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/16_01_13#15590#2090/_temp_3.config error, invalid json array for extruder
+[error]	2025-05-14 16:01:13.769569[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/16_01_13#15590#2090/_temp_3.config error, invalid json type for machine
+[error]	2025-05-14 16:01:13.769725[Thread 0x00000002017b9f00]:load_from_json: parse /var/folders/k2/2nltk5k10z7c_3dy219902xh0000gp/T/orcaslicer_model/Wed_May_14/16_01_13#15590#2090/_temp_3.config error, invalid json type for process
+[error]	2025-05-14 16:01:13.898342[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:13.900942[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:13.903316[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:13.905811[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-14 16:01:13.919507[Thread 0x00000002017b9f00]:validate_preset: preset_name K1C, no inherit, set to not found
+[warning]	2025-05-14 16:01:13.919520[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the printer preset not inherit from system
+[warning]	2025-05-14 16:01:13.919525[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 16:01:13.919526[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 1 preset not inherit from system
+[warning]	2025-05-14 16:01:13.919530[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 16:01:13.919532[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 2 preset not inherit from system
+[warning]	2025-05-14 16:01:13.919534[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 16:01:13.919535[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 3 preset not inherit from system
+[warning]	2025-05-14 16:01:13.919536[Thread 0x00000002017b9f00]:validate_preset: preset_name Hyper PLA, no inherit, set to not found
+[warning]	2025-05-14 16:01:13.919538[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found the filament 4 preset not inherit from system
+[warning]	2025-05-14 16:01:13.919539[Thread 0x00000002017b9f00]:validate_presets:file_name Box-Bolt_CREALITY.3mf, found self defined presets, count 2
+[error]	2025-05-14 16:01:16.547148[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:16.547642[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:16.548236[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:16.549174[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:16.705256[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:20.827043[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:20.828148[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:20.829099[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:20.830395[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-14 16:01:21.093069[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:21.139480[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:38.196938[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:39.802482[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:40.630605[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:41.158251[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:43.530528[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:01:46.907356[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:02:35.148601[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-14 16:03:20.559663[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-05-14 16:03:49.017800[Thread 0x00000002017b9f00]:reslice: in slicing all, current plate 0 already sliced, skip to next
+[warning]	2025-05-15 15:23:30.855986[Thread 0x00000002017b9f00]:15:23:30: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 15:26:49.823310[Thread 0x00000002017b9f00]:15:26:49: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 15:26:59.185994[Thread 0x00000002017b9f00]:15:26:59: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 15:27:02.081323[Thread 0x00000002017b9f00]:15:27:02: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 15:27:12.897507[Thread 0x00000002017b9f00]:15:27:12: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 15:31:32.429066[Thread 0x00000002017b9f00]:15:31:32: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 15:50:00.297906[Thread 0x00000002017b9f00]:15:50:00: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 15:51:14.172366[Thread 0x00000002017b9f00]:15:51:14: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-15 17:02:30.946919[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-15 18:06:31.718662[Thread 0x00000002017b9f00]:18:06:31: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 18:15:12.396457[Thread 0x00000002017b9f00]:18:15:12: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 18:18:40.262412[Thread 0x00000002017b9f00]:18:18:40: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 18:18:43.164421[Thread 0x00000002017b9f00]:18:18:43: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 18:21:41.232900[Thread 0x00000002017b9f00]:18:21:41: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 18:21:49.457242[Thread 0x00000002017b9f00]:18:21:49: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 18:22:17.776573[Thread 0x00000002017b9f00]:18:22:17: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 18:22:54.829995[Thread 0x00000002017b9f00]:18:22:54: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-15 18:23:13.684653[Thread 0x00000002017b9f00]:18:23:13: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 11:15:44.311227[Thread 0x00000002017b9f00]:11:15:44: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 11:15:44.312351[Thread 0x00000002017b9f00]:11:15:44: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 11:15:46.467707[Thread 0x00000002017b9f00]:11:15:46: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 11:15:47.522122[Thread 0x00000002017b9f00]:11:15:47: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 11:15:48.715002[Thread 0x00000002017b9f00]:11:15:48: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 11:19:34.135925[Thread 0x00000002017b9f00]:11:19:34: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 11:19:34.136131[Thread 0x00000002017b9f00]:11:19:34: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 11:19:37.202858[Thread 0x00000002017b9f00]:11:19:37: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-16 17:57:51.333816[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-16 18:01:19.856482[Thread 0x00000002017b9f00]:18:01:19: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-16 18:01:53.184234[Thread 0x00000002017b9f00]:18:01:53: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-18 16:32:51.456461[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-18 16:52:14.718558[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-18 16:55:27.828612[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-18 16:55:34.863075[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-18 16:58:40.342083[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-18 17:07:14.845460[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-18 17:23:09.246639[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-18 17:26:13.644865[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-19 09:20:14.765008[Thread 0x00000002017b9f00]:09:20:14: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-19 09:20:29.512589[Thread 0x00000002017b9f00]:09:20:29: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[warning]	2025-05-19 09:20:34.128213[Thread 0x00000002017b9f00]:09:20:34: Warning: Error running JavaScript: TypeError: null is not an object (evaluating 'video.setAttribute')
+[error]	2025-05-19 22:31:16.115471[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Wed_May_21_16_45_21_35443.log.0 b/OrcaSlicer/log/debug_Wed_May_21_16_45_21_35443.log.0
new file mode 100644
index 0000000..3134dba
--- /dev/null
+++ b/OrcaSlicer/log/debug_Wed_May_21_16_45_21_35443.log.0
@@ -0,0 +1,18 @@
+[error]	2025-05-21 16:45:21.959168[Thread 0x00000002017b9f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-21 16:45:22.304000[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-21 16:45:22.308755[Thread 0x00000002017b9f00]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf
+[error]	2025-05-21 16:45:22.308795[Thread 0x00000002017b9f00]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf
+[error]	2025-05-21 16:45:22.308810[Thread 0x0000000400407000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-21 16:45:22.308827[Thread 0x000000016f48f000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-05-21 16:45:22.308834[Thread 0x000000016f083000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-05-21 16:45:22.308853[Thread 0x0000000400c1f000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-05-21 16:45:22.308858[Thread 0x000000016f083000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-21 16:45:22.308861[Thread 0x000000016f48f000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-05-21 16:45:22.308868[Thread 0x0000000401437000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-05-21 16:45:22.308886[Thread 0x0000000400813000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-05-21 16:45:22.308889[Thread 0x000000040102b000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/WobbleX/WobbleX_TR8.3mf
+[error]	2025-05-21 16:45:22.308894[Thread 0x0000000400813000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount - UP.3mf
+[error]	2025-05-21 16:45:22.309251[Thread 0x000000016fca7000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-21 16:45:23.379850[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-21 16:45:23.395088[Thread 0x00000002017b9f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-21 16:47:20.027774[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Wed_May_21_16_48_07_36570.log.0 b/OrcaSlicer/log/debug_Wed_May_21_16_48_07_36570.log.0
new file mode 100644
index 0000000..5ba899b
--- /dev/null
+++ b/OrcaSlicer/log/debug_Wed_May_21_16_48_07_36570.log.0
@@ -0,0 +1,43 @@
+[error]	2025-05-21 16:48:08.008350[Thread 0x00000002017b9f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-21 16:48:08.304341[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-21 16:48:08.308447[Thread 0x00000002017b9f00]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf
+[error]	2025-05-21 16:48:08.308458[Thread 0x00000002017b9f00]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf
+[error]	2025-05-21 16:48:08.308479[Thread 0x000000016e257000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-05-21 16:48:08.308487[Thread 0x000000016e257000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-05-21 16:48:08.308491[Thread 0x000000016e257000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-05-21 16:48:08.308493[Thread 0x000000016e257000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/WobbleX/WobbleX_TR8.3mf
+[error]	2025-05-21 16:48:08.308501[Thread 0x000000016e663000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-05-21 16:48:08.308504[Thread 0x000000016e257000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount - UP.3mf
+[error]	2025-05-21 16:48:08.308510[Thread 0x000000016e663000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-05-21 16:48:08.308512[Thread 0x000000016e257000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-21 16:48:08.308515[Thread 0x000000016e663000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-05-21 16:48:08.308567[Thread 0x000000016f287000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-21 16:48:08.308918[Thread 0x000000016f693000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-21 16:48:09.432582[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-21 16:48:09.450176[Thread 0x00000002017b9f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-21 17:06:42.373809[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-21 17:06:53.333479[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-21 17:06:53.508117[Thread 0x00000002017b9f00]:File Metadata/plate_1.png not found from archive
+[warning]	2025-05-21 17:07:01.429196[Thread 0x000000016d80f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-21 17:08:24.960672[Thread 0x000000016d80f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-21 17:08:33.445681[Thread 0x000000016d80f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[warning]	2025-05-21 17:08:42.277828[Thread 0x000000016d80f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-21 17:09:13.147116[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-21 17:09:39.924392[Thread 0x000000016d80f000]:Arrange full params: {"min_obj_distance":0,"accuracy":1.000000,"parallel":1,"allow_rotations":0,"do_final_align":1,"allow_multi_materials_on_same_plate":0,"avoid_extrusion_cali_region":1,"is_seq_print":0,"bed_shrink_x":1.000000,"bed_shrink_y":1.000000,"brim_skirt_distance":0.000000,"clearance_height_to_rod":36.000000,"clearance_height_to_lid":140.000000,"clearance_radius":65.000000,"printable_height":260.000000,
+[error]	2025-05-21 17:10:56.397851[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:10:56.784572[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[warning]	2025-05-21 17:11:49.606687[Thread 0x00000002017b9f00]:reslice: in slicing all, current plate 0 already sliced, skip to next
+[error]	2025-05-21 17:13:46.520122[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:13:54.660026[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:13:55.837402[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:13:56.479569[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:14:02.047098[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:14:03.593975[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:14:04.839992[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:14:10.353119[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:14:31.267050[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:14:32.324159[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:14:45.491807[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:14:47.159773[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
+[error]	2025-05-21 17:21:00.451254[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-21 17:21:00.467650[Thread 0x00000002017b9f00]:tree_sel_change_delayedcan not find page with current selection 
diff --git a/OrcaSlicer/log/debug_Wed_May_21_17_21_22_59768.log.0 b/OrcaSlicer/log/debug_Wed_May_21_17_21_22_59768.log.0
new file mode 100644
index 0000000..068b924
--- /dev/null
+++ b/OrcaSlicer/log/debug_Wed_May_21_17_21_22_59768.log.0
@@ -0,0 +1,19 @@
+[error]	2025-05-21 17:21:23.331660[Thread 0x00000002017b9f00]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-05-21 17:21:23.664604[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-21 17:21:23.668998[Thread 0x00000001700b7000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-05-21 17:21:23.669004[Thread 0x00000001704c3000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-05-21 17:21:23.669014[Thread 0x00000001704c3000]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Ender3 Pi4 station x KlipperScreen/Ender3 Pi4 station x KlipperScreen - Front fan 40x40.3mf
+[error]	2025-05-21 17:21:23.669018[Thread 0x00000001704c3000]:Unable to open the file/Volumes/3D-Prints/Shaun the sheep - Toilet paper roll holder - Flat/Shaun sheep - toilet paper roll holder.3mf
+[error]	2025-05-21 17:21:23.669022[Thread 0x00000001704c3000]:Unable to open the file/Volumes/3D-Prints/filament_dust_filter_5x2mm_magnets.3mf
+[error]	2025-05-21 17:21:23.669025[Thread 0x00000001704c3000]:Unable to open the file/Volumes/3D-Prints/anticlog_reloaded.3mf
+[error]	2025-05-21 17:21:23.669109[Thread 0x0000000170cdb000]:Unable to open the file/Volumes/3D-Prints/Skadis/Logitech G502 holder/Skadis Logitech G502 holder.3mf
+[error]	2025-05-21 17:21:23.669131[Thread 0x0000000172117000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf
+[error]	2025-05-21 17:21:23.669136[Thread 0x00000001710e7000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-05-21 17:21:23.669139[Thread 0x0000000171d0b000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf
+[error]	2025-05-21 17:21:23.670226[Thread 0x0000000172523000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-21 17:21:23.670371[Thread 0x00000001708cf000]:File Metadata/plate_1.png not found from archive
+[error]	2025-05-21 17:21:24.940049[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-21 17:21:25.143395[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-05-21 17:21:25.153716[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
+[warning]	2025-05-21 17:21:25.316643[Thread 0x00000002017b9f00]:get_version, get_version not supported,return 00.00.00.00!
+[error]	2025-05-21 17:23:11.958774[Thread 0x00000002017b9f00]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/log/debug_Wed_Sep_03_11_36_15_47475.log.0 b/OrcaSlicer/log/debug_Wed_Sep_03_11_36_15_47475.log.0
new file mode 100644
index 0000000..2843f7b
--- /dev/null
+++ b/OrcaSlicer/log/debug_Wed_Sep_03_11_36_15_47475.log.0
@@ -0,0 +1,16 @@
+[error]	2025-09-03 11:36:16.757280[Thread 0x000000020587e0c0]:3dx drivers module loading error: dlopen(/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient, 0x0005): tried: '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file), '/Library/Frameworks/3DconnexionClient.framework/3DconnexionClient' (no such file)
+[error]	2025-09-03 11:36:17.086798[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
+[error]	2025-09-03 11:36:17.092000[Thread 0x000000020587e0c0]:Unable to open the file/Volumes/3D-Prints/Printer Ender 3/Belt tensioners/Belt tensioners (X Y) v2/X-Axis tensioner case x Webcam mount.3mf
+[error]	2025-09-03 11:36:17.092020[Thread 0x000000016ffc3000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_CREALITY.3mf
+[error]	2025-09-03 11:36:17.092080[Thread 0x000000040205b000]:Unable to open the file/Volumes/3D-Prints/Meta Quest/Quest_Wall_Mount_V3.85.3mf
+[error]	2025-09-03 11:36:17.092098[Thread 0x0000000402873000]:Unable to open the file/Volumes/3D-Prints/Skadis/Pince.3mf
+[error]	2025-09-03 11:36:17.092099[Thread 0x0000000401c4f000]:Unable to open the file/Volumes/3D-Prints/Cardboard crafting tools/Box-Bolt_ASWX4P.3mf
+[error]	2025-09-03 11:36:17.092286[Thread 0x000000020587e0c0]:Unable to open the file/Users/mbocquet/Downloads/8mm+Wide,+0.16+layer,+2+walls,+15%+gyroid+infill.3mf
+[error]	2025-09-03 11:36:17.092294[Thread 0x0000000400407000]:Unable to open the file/Users/mbocquet/Downloads/headphone-holder-cable-hook-adapter-hole(1).3mf
+[error]	2025-09-03 11:36:17.092302[Thread 0x0000000401437000]:Unable to open the file/Users/mbocquet/Downloads/3%20Hooks%20-%20Xbox%20One%20Controller%20Holder%20With%20Lip.3mf
+[error]	2025-09-03 11:36:17.092318[Thread 0x000000040102b000]:Unable to open the file/Users/mbocquet/Downloads/fiido-t1-pro-apple-airtag-holder-model_files/fiido-tag.3mf
+[error]	2025-09-03 11:36:17.092321[Thread 0x000000040205b000]:Unable to open the file/Users/mbocquet/Downloads/3-hooks(1).3mf
+[error]	2025-09-03 11:36:17.092319[Thread 0x0000000400813000]:Unable to open the file/Users/mbocquet/Downloads/3+Hooks+Screwless+Mount.3mf
+[error]	2025-09-03 11:36:17.092694[Thread 0x0000000400c1f000]:Unable to open the file/Users/mbocquet/.sshfs/mount/3D-prints/Skadis/DualShock 4 holder with lip.3mf
+[error]	2025-09-03 11:36:17.093097[Thread 0x0000000402467000]:File Metadata/plate_1.png not found from archive
+[error]	2025-09-03 11:36:18.856754[Thread 0x000000020587e0c0]:calc_exclude_triangles:Unable to create exclude triangles
diff --git a/OrcaSlicer/printers/BL-P001.json b/OrcaSlicer/printers/BL-P001.json
new file mode 100644
index 0000000..0004806
--- /dev/null
+++ b/OrcaSlicer/printers/BL-P001.json
@@ -0,0 +1,88 @@
+{
+    "00.00.00.00": {
+        "display_name": "Bambu Lab X1 Carbon",
+        "print": {
+            "ipcam": {
+                "resolution_supported": [ "720p", "1080p" ],
+                "virtual_camera": "enabled",
+                "liveview": {
+                    "remote": "tutk"
+                },
+                "file": {
+                    "remote": "tutk",
+                    "model_download": "enabled"
+                }
+            },
+            "support_motor_noise_cali":false,
+            "support_tunnel_mqtt":false,
+            "support_mqtt_alive":false,
+            "support_command_ams_switch":false,
+            "support_cloud_print_only":false,
+            "support_1080dpi":false,
+            "support_prompt_sound":false,
+            "support_ams_humidity":false,
+            "support_auto_recovery_step_loss":false,
+            "support_auto_leveling":true,
+            "support_update_remain":false,
+            "support_timelapse":true,
+            "support_filament_backup":false,
+            "support_chamber_fan":true,
+            "support_aux_fan":true,
+            "support_send_to_sd":false,
+            "support_print_all":true,
+            "support_print_without_sd":true,
+            "support_flow_calibration":true,
+            "support_build_plate_marker_detect":false,
+            "support_lidar_calibration":true,
+            "support_ai_monitoring":false,
+            "support_first_layer_inspect":true,
+            "support_chamber_temp_edit":false,
+            "support_extrusion_cali":false,
+            "support_user_preset":false
+        },
+        "model_id":"BL-P001",
+        "compatible_machine":["BL-P002", "C11", "C12", "C13"],
+        "printer_type":"3DPrinter-X1-Carbon",
+        "printer_thumbnail_image":"printer_thumbnail",
+        "printer_connect_help_image":"input_access_code_x1",
+        "printer_use_ams_image":"ams_icon",
+        "use_ams_type":"generic",
+        "printer_arch":"core_xy",
+        "printer_series":"series_x1",
+        "has_cali_line":true,
+        "printer_is_enclosed":true
+    }, 
+    "01.01.01.00": {
+        "print": {
+            "support_1080dpi":true,
+            "support_ams_humidity":true,
+            "support_update_remain":true,
+            "support_auto_recovery_step_loss":true,
+            "support_filament_backup":true,
+            "support_send_to_sd":true,
+            "support_build_plate_marker_detect":true,
+            "support_ai_monitoring":true
+        }
+    },
+    "01.05.06.01" : {
+        "print": {
+            "support_command_ams_switch":true
+        }
+    },
+    "01.05.06.05" : {
+        "engineer":"00.03.10.05",
+         "print": {
+             "support_mqtt_alive":true
+         }
+    },
+    "01.05.06.06": {
+        "print": {
+            "support_tunnel_mqtt":true
+        }
+    },
+    "01.06.06.00": {
+        "print": {
+            "support_user_preset":true
+        }
+    }
+}
\ No newline at end of file
diff --git a/OrcaSlicer/printers/BL-P002.json b/OrcaSlicer/printers/BL-P002.json
new file mode 100644
index 0000000..3c2e7ed
--- /dev/null
+++ b/OrcaSlicer/printers/BL-P002.json
@@ -0,0 +1,88 @@
+{
+    "00.00.00.00": {
+        "display_name": "Bambu Lab X1",
+        "print": {
+            "ipcam": {
+                "resolution_supported": [ "720p", "1080p" ],
+                "virtual_camera": "enabled",
+                "liveview": {
+                    "remote": "tutk"
+                },
+                "file": {
+                    "remote": "tutk",
+                    "model_download": "enabled"
+                }
+            },
+            "support_motor_noise_cali":false,
+            "support_tunnel_mqtt":false,
+            "support_mqtt_alive":false,
+            "support_command_ams_switch":false,
+            "support_cloud_print_only":false,
+            "support_1080dpi":false,
+            "support_prompt_sound":false,
+            "support_ams_humidity":false,
+            "support_auto_recovery_step_loss":false,
+            "support_auto_leveling":true,
+            "support_update_remain":false,
+            "support_timelapse":true,
+            "support_filament_backup":false,
+            "support_chamber_fan":true,
+            "support_aux_fan":true,
+            "support_send_to_sd":false,
+            "support_print_all":true,
+            "support_print_without_sd":true,
+            "support_flow_calibration":true,
+            "support_build_plate_marker_detect":false,
+            "support_lidar_calibration":true,
+            "support_ai_monitoring":false,
+            "support_first_layer_inspect":true,
+            "support_chamber_temp_edit":false,
+            "support_extrusion_cali":false,
+            "support_user_preset":false
+        },
+        "model_id": "BL-P002",
+        "compatible_machine":["BL-P001", "C11", "C12", "C13"],
+        "printer_type": "3DPrinter-X1",
+        "printer_thumbnail_image": "printer_thumbnail",
+        "printer_connect_help_image": "input_access_code_x1",
+        "printer_use_ams_image":"ams_icon",
+        "use_ams_type":"generic",
+        "printer_arch" : "core_xy",
+        "printer_series":"series_x1",
+        "has_cali_line":true,
+        "printer_is_enclosed":true
+    }, 
+    "01.01.01.00": {
+        "print": {
+            "support_1080dpi":true,
+            "support_ams_humidity":true,
+            "support_update_remain":true,
+            "support_auto_recovery_step_loss":true,
+            "support_filament_backup":true,
+            "support_send_to_sd":true,
+            "support_build_plate_marker_detect":true,
+            "support_ai_monitoring":true
+        }
+    },
+    "01.05.06.01" : {
+        "print": {
+            "support_command_ams_switch":true
+        }
+    },
+    "01.05.06.05" : {
+        "engineer":"00.03.10.05",
+        "print": {
+            "support_mqtt_alive":true
+        }
+    },
+    "01.05.06.06": {
+        "print": {
+            "support_tunnel_mqtt":true
+        }
+    },
+    "01.06.06.00": {
+        "print": {
+            "support_user_preset":true
+        }
+    }
+}
\ No newline at end of file
diff --git a/OrcaSlicer/printers/C11.json b/OrcaSlicer/printers/C11.json
new file mode 100644
index 0000000..a2cbbb0
--- /dev/null
+++ b/OrcaSlicer/printers/C11.json
@@ -0,0 +1,88 @@
+{
+    "00.00.00.00": {
+        "display_name": "Bambu Lab P1P",
+        "print": {
+            "ipcam": {
+                "resolution_supported":  [ "720p" ],
+                "liveview": {
+                    "local": "local"
+                }
+            },
+            "support_motor_noise_cali":false,
+            "support_tunnel_mqtt":false,
+            "support_mqtt_alive":false,
+            "support_command_ams_switch":false,
+            "support_cloud_print_only":true,
+            "support_1080dpi":false,
+            "support_prompt_sound":false,
+            "support_ams_humidity":true,
+            "support_auto_recovery_step_loss":true,
+            "support_auto_leveling":true,
+            "support_update_remain":true,
+            "support_timelapse":true,
+            "support_filament_backup":true,
+            "support_chamber_fan":true,
+            "support_aux_fan":true,
+            "support_send_to_sd":false,
+            "support_print_all":false,
+            "support_print_without_sd":false,
+            "support_flow_calibration":false,
+            "support_build_plate_marker_detect":false,
+            "support_lidar_calibration":false,
+            "support_ai_monitoring":false,
+            "support_first_layer_inspect":false,
+            "support_chamber_temp_edit":false,
+            "support_extrusion_cali":true,
+            "support_user_preset":false,
+            "bed_temperature_limit": 100
+        },
+        "model_id": "C11",
+        "compatible_machine":["BL-P001", "BL-P002", "C12", "C13"],
+        "printer_type": "C11",
+        "ftp_folder" : "sdcard/",
+        "printer_thumbnail_image": "printer_thumbnail_p1p",
+        "printer_connect_help_image": "input_access_code_p1p",
+        "printer_use_ams_image":"ams_icon",
+        "use_ams_type":"generic",
+        "printer_arch" : "core_xy",
+        "printer_series":"series_p1p",
+        "has_cali_line":false,
+        "printer_is_enclosed":false
+    }, 
+    "01.02.00.00": {
+        "print": {
+            "support_send_to_sd":true
+        }
+    },
+    "01.02.99.00": {
+        "print": {
+            "ipcam": {
+                "liveview": {
+                    "remote": "tutk"
+                }
+            }
+        }
+    },
+    "01.02.99.10" : {
+        "print": {
+            "support_command_ams_switch":true
+        }
+    },
+    "01.03.50.01" : {
+        "engineer":"00.06.03.51",
+        "print": {
+            "support_mqtt_alive":true,
+            "support_tunnel_mqtt":true
+        }
+    },
+    "01.04.50.01": {
+        "print": {
+            "ipcam": {
+                "file": {
+                    "remote": "tutk"
+                }
+            },
+            "support_user_preset":true
+        }
+    }
+}
diff --git a/OrcaSlicer/printers/C12.json b/OrcaSlicer/printers/C12.json
new file mode 100644
index 0000000..5cc12a1
--- /dev/null
+++ b/OrcaSlicer/printers/C12.json
@@ -0,0 +1,80 @@
+{
+    "00.00.00.00": {
+        "display_name": "Bambu Lab P1S",
+        "print": {
+            "ipcam": {
+                "resolution_supported":  [ "720p" ],
+                "liveview": {
+                    "local": "local"
+                }
+            },
+            "support_motor_noise_cali":false,
+            "support_tunnel_mqtt":false,
+            "support_mqtt_alive":false,
+            "support_command_ams_switch":false,
+            "support_cloud_print_only":true,
+            "support_1080dpi":false,
+            "support_prompt_sound":false,
+            "support_ams_humidity":true,
+            "support_auto_recovery_step_loss":true,
+            "support_auto_leveling":true,
+            "support_update_remain":true,
+            "support_timelapse":true,
+            "support_filament_backup":true,
+            "support_chamber_fan":true,
+            "support_aux_fan":true,
+            "support_send_to_sd":true,
+            "support_print_all":false,
+            "support_print_without_sd":false,
+            "support_flow_calibration":false,
+            "support_build_plate_marker_detect":false,
+            "support_lidar_calibration":false,
+            "support_ai_monitoring":false,
+            "support_first_layer_inspect":false,
+            "support_chamber_temp_edit":false,
+            "support_extrusion_cali":true,
+            "support_user_preset":false,
+            "bed_temperature_limit": 100
+        },
+        "model_id": "C12",
+        "compatible_machine":["BL-P001", "BL-P002", "C11", "C13"],
+        "printer_type": "C12",
+        "ftp_folder" : "sdcard/",
+        "printer_thumbnail_image": "printer_thumbnail_p1s",
+        "printer_connect_help_image": "input_access_code_p1p",
+        "printer_use_ams_image":"ams_icon",
+        "use_ams_type":"generic",
+        "printer_arch" : "core_xy",
+        "printer_series":"series_p1p",
+        "has_cali_line":false,
+        "printer_is_enclosed":true
+    }, 
+    "01.02.99.10" : {
+        "print": {
+            "support_command_ams_switch":true
+        }
+    },
+    "01.03.50.01": {
+        "engineer":"00.06.03.51",
+        "resolution_supported":  [ "720p" ],
+        "print": {
+            "ipcam": {
+                "liveview": {
+                    "remote": "tutk"
+                }
+            },
+            "support_mqtt_alive":true,
+            "support_tunnel_mqtt":true
+        }
+    },
+    "01.04.50.01": {
+        "print": {
+            "ipcam": {
+                "file": {
+                    "remote": "tutk"
+                }
+            },
+            "support_user_preset":true
+        }
+    }
+}
diff --git a/OrcaSlicer/printers/C13.json b/OrcaSlicer/printers/C13.json
new file mode 100644
index 0000000..44c4ecd
--- /dev/null
+++ b/OrcaSlicer/printers/C13.json
@@ -0,0 +1,61 @@
+{
+    "00.00.00.00": {
+        "display_name": "Bambu Lab X1E",
+        "print": {
+            "ipcam": {
+                "resolution_supported": [ "720p", "1080p" ],
+                "virtual_camera": "enabled",
+                "liveview": {
+                    "remote": "tutk"
+                },
+                "file": {
+                    "remote": "tutk",
+                    "model_download": "enabled"
+                }
+            },
+            "support_motor_noise_cali":false,
+            "support_tunnel_mqtt":true,
+            "support_mqtt_alive":true,
+            "support_command_ams_switch":true,
+            "support_ssl_for_mqtt":true,
+            "support_cloud_print_only":false,
+            "support_1080dpi":true,
+            "support_prompt_sound":false,
+            "support_ams_humidity":true,
+            "support_auto_recovery_step_loss":true,
+            "support_auto_leveling":true,
+            "support_update_remain":true,
+            "support_timelapse":true,
+            "support_filament_backup":true,
+            "support_chamber_fan":true,
+            "support_aux_fan":true,
+            "support_send_to_sd":true,
+            "support_print_all":true,
+            "support_print_without_sd":true,
+            "support_flow_calibration":true,
+            "support_build_plate_marker_detect":true,
+            "support_lidar_calibration":true,
+            "support_ai_monitoring":true,
+            "support_first_layer_inspect":true,
+            "support_chamber_temp_edit":true,
+            "support_extrusion_cali":false,
+            "support_user_preset":false,
+            "bed_temperature_limit": 110,
+            "nozzle_max_temperature": 320
+        },
+        "model_id": "C13",
+        "compatible_machine":["BL-P001", "BL-P002", "C11", "C12"],
+        "printer_type": "C13",
+        "printer_thumbnail_image": "printer_thumbnail",
+        "printer_connect_help_image": "input_access_code_x1",
+        "printer_use_ams_image":"ams_icon",
+        "use_ams_type":"generic",
+        "printer_arch" : "core_xy",
+        "printer_series":"series_x1",
+        "has_cali_line":true,
+        "printer_is_enclosed":true
+    }, 
+    "01.05.06.06": {
+        "rv2166": "00.00.21.20"
+    }
+}
\ No newline at end of file
diff --git a/OrcaSlicer/printers/N1.json b/OrcaSlicer/printers/N1.json
new file mode 100644
index 0000000..ac161ed
--- /dev/null
+++ b/OrcaSlicer/printers/N1.json
@@ -0,0 +1,62 @@
+{
+    "00.00.00.00": {
+        "display_name": "Bambu Lab A1 mini",
+        "print": {
+            "ipcam": {
+                "resolution_supported":  [ "720p" ],
+                "liveview": {
+                    "local": "local",
+                    "remote": "tutk"
+                }
+            },
+            "support_motor_noise_cali":true,
+            "support_tunnel_mqtt":true,
+            "support_mqtt_alive":true,
+            "support_command_ams_switch":true,
+            "support_cloud_print_only":true,
+            "support_1080dpi":true,
+            "support_prompt_sound":true,
+            "support_ams_humidity":false,
+            "support_auto_recovery_step_loss":true,
+            "support_auto_leveling":true,
+            "support_update_remain":false,
+            "support_timelapse":true,
+            "support_filament_backup":true,
+            "support_chamber_fan":false,
+            "support_aux_fan":false,
+            "support_send_to_sd":true,
+            "support_print_all":false,
+            "support_print_without_sd":false,
+            "support_flow_calibration":true,
+            "support_lidar_calibration":false,
+            "support_ai_monitoring":false,
+            "support_first_layer_inspect":false,
+            "support_chamber_temp_edit":false,
+            "support_extrusion_cali":true,
+            "support_user_preset":false,
+            "bed_temperature_limit": 100
+        },
+        "model_id": "N1",
+        "compatible_machine":[],
+        "printer_type": "N1",
+        "ftp_folder" : "sdcard/",
+        "printer_thumbnail_image": "printer_thumbnail_n1",
+        "printer_connect_help_image": "input_access_code_n1",
+        "printer_use_ams_image":"extra_icon",
+        "use_ams_type":"f1",
+        "printer_arch" : "i3",
+        "printer_series":"series_p1p",
+        "has_cali_line":false,
+        "printer_is_enclosed":false
+    }, 
+    "01.01.50.01": {
+        "print": {
+            "ipcam": {
+                "file": {
+                    "remote": "tutk"
+                }
+            },
+            "support_user_preset":true
+        }
+    }
+}
\ No newline at end of file
diff --git a/OrcaSlicer/printers/N2S.json b/OrcaSlicer/printers/N2S.json
new file mode 100644
index 0000000..a87b08d
--- /dev/null
+++ b/OrcaSlicer/printers/N2S.json
@@ -0,0 +1,61 @@
+{
+    "00.00.00.00": {
+        "display_name": "Bambu Lab A1",
+        "print": {
+            "ipcam": {
+                "resolution_supported":  [ "720p" ],
+                "liveview": {
+                    "local": "local",
+                    "remote": "tutk"
+                }
+            },
+            "support_motor_noise_cali":true,
+            "support_tunnel_mqtt":true,
+            "support_mqtt_alive":true,
+            "support_command_ams_switch":true,
+            "support_cloud_print_only":true,
+            "support_1080dpi":true,
+            "support_prompt_sound":true,
+            "support_ams_humidity":false,
+            "support_auto_recovery_step_loss":true,
+            "support_auto_leveling":true,
+            "support_update_remain":false,
+            "support_timelapse":true,
+            "support_filament_backup":true,
+            "support_chamber_fan":false,
+            "support_aux_fan":false,
+            "support_send_to_sd":true,
+            "support_print_all":false,
+            "support_print_without_sd":false,
+            "support_flow_calibration":true,
+            "support_lidar_calibration":false,
+            "support_ai_monitoring":false,
+            "support_first_layer_inspect":false,
+            "support_chamber_temp_edit":false,
+            "support_extrusion_cali":true,
+            "support_user_preset":true,
+            "bed_temperature_limit": 100
+        },
+        "model_id": "N2S",
+        "compatible_machine":[],
+        "printer_type": "N2S",
+        "ftp_folder" : "sdcard/",
+        "printer_thumbnail_image": "printer_thumbnail_n2s",
+        "printer_connect_help_image": "input_access_code_n1",
+        "printer_use_ams_image":"extra_icon",
+        "use_ams_type":"f1",
+        "printer_arch" : "i3",
+        "printer_series":"series_p1p",
+        "has_cali_line":false,
+        "printer_is_enclosed":false
+    }, 
+    "01.01.50.01": {
+        "print": {
+            "ipcam": {
+                "file": {
+                    "remote": "tutk"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/OrcaSlicer/printers/ams_load.gcode b/OrcaSlicer/printers/ams_load.gcode
new file mode 100644
index 0000000..5f2cc89
--- /dev/null
+++ b/OrcaSlicer/printers/ams_load.gcode
@@ -0,0 +1,51 @@
+M620 S[next_extruder]
+M106 S255
+M104 S250
+M17 S
+M17 X0.5 Y0.5
+G91
+G1 Y-5 F1200
+G1 Z3
+G90
+G28 X
+M17 R
+G1 X70 F21000
+G1 Y245
+G1 Y265 F3000
+G4
+M106 S0
+M109 S250
+G1 X90
+G1 Y255
+G1 X120
+G1 X20 Y50 F21000
+G1 Y-3
+T[next_extruder]
+G1 X54
+G1 Y265
+G92 E0
+G1 E40 F180
+G4
+M104 S[new_filament_temp]
+G1 X70 F15000
+G1 X76
+G1 X65
+G1 X76
+G1 X65
+G1 X90 F3000
+G1 Y255
+G1 X100
+G1 Y265
+G1 X70 F10000
+G1 X100 F5000
+G1 X70 F10000
+G1 X100 F5000
+G1 X165 F12000
+G1 Y245
+G1 X70
+G1 Y265 F3000
+G91
+G1 Z-3 F1200
+G90
+M621 S[next_extruder]
+
diff --git a/OrcaSlicer/printers/ams_unload.gcode b/OrcaSlicer/printers/ams_unload.gcode
new file mode 100644
index 0000000..9bfd374
--- /dev/null
+++ b/OrcaSlicer/printers/ams_unload.gcode
@@ -0,0 +1,33 @@
+M620 S255
+M106 P1 S255
+M104 S250
+M17 S
+M17 X0.5 Y0.5
+G91
+G1 Y-5 F3000
+G1 Z3 F1200
+G90
+G28 X
+M17 R
+G1 X70 F21000
+G1 Y245
+G1 Y265 F3000
+G4
+M106 P1 S0
+M109 S250
+G1 X90 F3000
+G1 Y255 F4000
+G1 X100 F5000
+G1 X120 F21000
+G1 X20 Y50
+G1 Y-3
+T255
+G4
+M104 S0
+G1 X70 F3000
+
+G91
+G1 Z-3 F1200
+G90
+M621 S255
+
diff --git a/OrcaSlicer/printers/filaments_blacklist.json b/OrcaSlicer/printers/filaments_blacklist.json
new file mode 100644
index 0000000..375b3c0
--- /dev/null
+++ b/OrcaSlicer/printers/filaments_blacklist.json
@@ -0,0 +1,60 @@
+{
+  "whitelist": [
+  ],
+  "blacklist": [
+    {
+      "vendor": "Third Party",
+      "type": "TPU",
+      "action": "prohibition",
+      "description": "TPU: not supported"
+    },
+    {
+      "vendor": "Bambulab",
+      "type": "TPU",
+      "action": "prohibition",
+      "description": "TPU: not supported"
+    },
+    {
+      "vendor": "Third Party",
+      "type": "PVA",
+      "action": "warning",
+      "description": "PVA: flexible"
+    },
+    {
+      "vendor": "Third Party",
+      "type": "PLA-CF",
+      "action": "warning",
+      "description": "CF/GF: hard and brittle"
+    },
+    {
+      "vendor": "Third Party",
+      "type": "PETG-CF",
+      "action": "warning",
+      "description": "CF/GF: hard and brittle"
+    },
+    {
+      "vendor": "Third Party",
+      "type": "PA-CF",
+      "action": "warning",
+      "description": "CF/GF: hard and brittle"
+    },
+    {
+      "vendor": "Third Party",
+      "type": "PAHT-CF",
+      "action": "warning",
+      "description": "CF/GF: hard and brittle"
+    },
+    {
+      "vendor": "Bambulab",
+      "type": "PET-CF",
+      "action": "prohibition",
+      "description": "Bambu PET-CF/PA6-CF: not supported"
+    },
+    {
+      "vendor": "Bambulab",
+      "type": "PA6-CF",
+      "action": "prohibition",
+      "description": "Bambu PET-CF/PA6-CF: not supported"
+    }
+  ]
+}
diff --git a/OrcaSlicer/printers/version.txt b/OrcaSlicer/printers/version.txt
new file mode 100644
index 0000000..6b8ecb2
--- /dev/null
+++ b/OrcaSlicer/printers/version.txt
@@ -0,0 +1 @@
+01.10.00.01
\ No newline at end of file
diff --git a/OrcaSlicer/system/Artillery.json b/OrcaSlicer/system/Artillery.json
new file mode 100644
index 0000000..f0b70ce
--- /dev/null
+++ b/OrcaSlicer/system/Artillery.json
@@ -0,0 +1,310 @@
+{
+    "name": "Artillery",
+    "version":  "02.03.00.03",
+    "force_update": "0",
+    "description": "Artillery configurations",
+    "machine_model_list": [
+		{
+            "name": "Artillery Sidewinder X1",
+            "sub_path": "machine/Artillery Sidewinder X1.json"
+        },
+	    {
+            "name": "Artillery Genius",
+            "sub_path": "machine/Artillery Genius.json"
+        },
+		{
+            "name": "Artillery Genius Pro",
+            "sub_path": "machine/Artillery Genius Pro.json"
+        },
+        {
+            "name": "Artillery Sidewinder X2",
+            "sub_path": "machine/Artillery Sidewinder X2.json"
+        },
+		{
+            "name": "Artillery Hornet",
+            "sub_path": "machine/Artillery Hornet.json"
+        },
+		{
+            "name": "Artillery Sidewinder X3 Pro",
+            "sub_path": "machine/Artillery Sidewinder X3 Pro.json"
+        },
+		{
+            "name": "Artillery Sidewinder X3 Plus",
+            "sub_path": "machine/Artillery Sidewinder X3 Plus.json"
+        },
+		{
+            "name": "Artillery Sidewinder X4 Pro",
+            "sub_path": "machine/Artillery Sidewinder X4 Pro.json"
+        },
+		{
+            "name": "Artillery Sidewinder X4 Plus",
+            "sub_path": "machine/Artillery Sidewinder X4 Plus.json"
+        }
+    ],
+    "process_list": [
+        {
+            "name": "fdm_process_common",
+            "sub_path": "process/fdm_process_common.json"
+        },
+		{
+            "name": "0.16mm Optimal @Artillery X1",
+            "sub_path": "process/0.16mm Optimal @Artillery X1.json"
+        },
+		{
+            "name": "0.15mm Optimal @Artillery Genius",
+            "sub_path": "process/0.15mm Optimal @Artillery Genius.json"
+        },
+		{
+            "name": "0.15mm Optimal @Artillery Genius Pro",
+            "sub_path": "process/0.15mm Optimal @Artillery Genius Pro.json"
+        },
+		{
+            "name": "0.16mm Optimal @Artillery Hornet",
+            "sub_path": "process/0.16mm Optimal @Artillery Hornet.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery X1",
+            "sub_path": "process/0.20mm Standard @Artillery X1.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery Genius",
+            "sub_path": "process/0.20mm Standard @Artillery Genius.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery Genius Pro",
+            "sub_path": "process/0.20mm Standard @Artillery Genius Pro.json"
+        },
+        {
+            "name": "0.20mm Standard @Artillery X2",
+            "sub_path": "process/0.20mm Standard @Artillery X2.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery Hornet",
+            "sub_path": "process/0.20mm Standard @Artillery Hornet.json"
+        },
+		{
+            "name": "0.24mm Draft @Artillery X1",
+            "sub_path": "process/0.24mm Draft @Artillery X1.json"
+        },
+		{
+            "name": "0.25mm Draft @Artillery Genius",
+            "sub_path": "process/0.25mm Draft @Artillery Genius.json"
+        },
+		{
+            "name": "0.25mm Draft @Artillery Genius Pro",
+            "sub_path": "process/0.25mm Draft @Artillery Genius Pro.json"
+        },
+		{
+            "name": "0.24mm Draft @Artillery Hornet",
+            "sub_path": "process/0.24mm Draft @Artillery Hornet.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.12mm Fine @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.20mm Strength @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.24mm Draft @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle",
+            "sub_path": "process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.08mm High Quality @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.12mm Fine @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.12mm High Quality @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.16mm High Quality @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.16mm Optimal @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.16mm Optimal @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.20mm Strength @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.24mm Draft @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle",
+            "sub_path": "process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery X3Plus 0.4 nozzle",
+            "sub_path": "process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json"
+        },
+		{
+            "name": "0.20mm Standard @Artillery X3Pro 0.4 nozzle",
+            "sub_path": "process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json"
+        }
+    ],
+    "filament_list": [
+        {
+            "name": "fdm_filament_common",
+            "sub_path": "filament/fdm_filament_common.json"
+        },
+        {
+            "name": "fdm_filament_pla",
+            "sub_path": "filament/fdm_filament_pla.json"
+        },
+        {
+            "name": "fdm_filament_tpu",
+            "sub_path": "filament/fdm_filament_tpu.json"
+        },
+        {
+            "name": "fdm_filament_pet",
+            "sub_path": "filament/fdm_filament_pet.json"
+        },
+        {
+            "name": "fdm_filament_abs",
+            "sub_path": "filament/fdm_filament_abs.json"
+        },
+        {
+            "name": "fdm_filament_asa",
+            "sub_path": "filament/fdm_filament_asa.json"
+        },
+        {
+            "name": "Artillery Generic PLA",
+            "sub_path": "filament/Artillery Generic PLA.json"
+        },
+        {
+            "name": "Artillery Generic PLA-CF",
+            "sub_path": "filament/Artillery Generic PLA-CF.json"
+        },
+        {
+            "name": "Artillery Generic PETG",
+            "sub_path": "filament/Artillery Generic PETG.json"
+        },
+        {
+            "name": "Artillery Generic ABS",
+            "sub_path": "filament/Artillery Generic ABS.json"
+        },
+        {
+            "name": "Artillery Generic TPU",
+            "sub_path": "filament/Artillery Generic TPU.json"
+        },
+        {
+            "name": "Artillery Generic ASA",
+            "sub_path": "filament/Artillery Generic ASA.json"
+        },
+        {
+            "name": "Artillery PLA Basic",
+            "sub_path": "filament/Artillery PLA Basic.json"
+        },
+        {
+            "name": "Artillery PLA Matte",
+            "sub_path": "filament/Artillery PLA Matte.json"
+        },
+        {
+            "name": "Artillery PLA Silk",
+            "sub_path": "filament/Artillery PLA Silk.json"
+        },
+        {
+            "name": "Artillery PLA Tough",
+            "sub_path": "filament/Artillery PLA Tough.json"
+        },        
+        {
+            "name": "Artillery PETG",
+            "sub_path": "filament/Artillery PETG.json"
+        },
+        {
+            "name": "Artillery TPU",
+            "sub_path": "filament/Artillery TPU.json"
+        },
+        {
+            "name": "Artillery ABS",
+            "sub_path": "filament/Artillery ABS.json"
+        }
+    ],
+    "machine_list": [
+        {
+            "name": "fdm_machine_common",
+            "sub_path": "machine/fdm_machine_common.json"
+        },
+		{
+            "name": "Artillery Sidewinder X1 0.4 nozzle",
+            "sub_path": "machine/Artillery Sidewinder X1 0.4 nozzle.json"
+        },
+		{
+            "name": "Artillery Genius 0.4 nozzle",
+            "sub_path": "machine/Artillery Genius 0.4 nozzle.json"
+        },
+        {
+            "name": "Artillery Sidewinder X2 0.4 nozzle",
+            "sub_path": "machine/Artillery Sidewinder X2 0.4 nozzle.json"
+        },
+		{
+            "name": "Artillery Genius Pro 0.4 nozzle",
+            "sub_path": "machine/Artillery Genius Pro 0.4 nozzle.json"
+        },
+		{
+            "name": "Artillery Hornet 0.4 nozzle",
+            "sub_path": "machine/Artillery Hornet 0.4 nozzle.json"
+        },
+        {
+            "name": "Artillery Sidewinder X3 Pro 0.4 nozzle",
+            "sub_path": "machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "Artillery Sidewinder X3 Plus 0.4 nozzle",
+            "sub_path": "machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "Artillery Sidewinder X4 Pro 0.4 nozzle",
+            "sub_path": "machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "Artillery Sidewinder X4 Plus 0.4 nozzle",
+            "sub_path": "machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json"
+        }
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery ABS.json b/OrcaSlicer/system/Artillery/filament/Artillery ABS.json
new file mode 100644
index 0000000..1e49b38
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery ABS.json	
@@ -0,0 +1,85 @@
+{
+	"instantiation": "true",
+	"from": "system",
+    "compatible_printers": [
+		"Artillery Sidewinder X3 Pro 0.4 nozzle",
+		"Artillery Sidewinder X3 Plus 0.4 nozzle",
+		"Artillery Sidewinder X4 Pro 0.4 nozzle",
+		"Artillery Sidewinder X4 Plus 0.4 nozzle"
+    ],
+    "filament_retraction_length": [
+        "1.3"
+    ],
+    "filament_retraction_speed": [
+        "40"
+    ],
+    "filament_settings_id": [
+        "Artillery ABS"
+    ],
+    "filament_start_gcode": [
+        ""
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Artillery"
+    ],
+    "filament_z_hop": [
+        "0.4"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "inherits": "Artillery Generic PLA",
+    "name": "Artillery ABS",
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "fan_max_speed": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "temperature_vitrification": [
+        "220"
+    ],
+	"overhang_fan_threshold": [
+        "25%"
+    ],
+	"overhang_fan_speed": [
+        "80"
+    ],
+	"close_fan_the_first_x_layers": [
+        "3"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.05"
+    ],
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery Generic ABS.json b/OrcaSlicer/system/Artillery/filament/Artillery Generic ABS.json
new file mode 100644
index 0000000..c71c8b1
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery Generic ABS.json	
@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "name": "Artillery Generic ABS",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_abs",
+    "filament_flow_ratio": [
+        "0.926"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle",
+		"Artillery Genius 0.4 nozzle",
+		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
+		"Artillery Hornet 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery Generic ASA.json b/OrcaSlicer/system/Artillery/filament/Artillery Generic ASA.json
new file mode 100644
index 0000000..8141add
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery Generic ASA.json	
@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFSA04",
+    "name": "Artillery Generic ASA",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_asa",
+    "filament_flow_ratio": [
+        "0.93"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle",
+		"Artillery Genius 0.4 nozzle",
+		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
+		"Artillery Hornet 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery Generic PETG.json b/OrcaSlicer/system/Artillery/filament/Artillery Generic PETG.json
new file mode 100644
index 0000000..8cc312c
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery Generic PETG.json	
@@ -0,0 +1,52 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFSA04",
+    "name": "Artillery Generic PETG",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pet",
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "fan_max_speed": [
+        "90"
+    ],
+    "fan_min_speed": [
+        "40"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "10"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle",
+		"Artillery Genius 0.4 nozzle",
+		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
+		"Artillery Hornet 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery Generic PLA-CF.json b/OrcaSlicer/system/Artillery/filament/Artillery Generic PLA-CF.json
new file mode 100644
index 0000000..9ee9303
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery Generic PLA-CF.json	
@@ -0,0 +1,40 @@
+{
+    "type": "filament",
+    "filament_id": "GFL98",
+    "setting_id": "GFSA04",
+    "name": "Artillery Generic PLA-CF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_type": [
+        "PLA-CF"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
+    "compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle",
+		"Artillery Genius 0.4 nozzle",
+		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
+		"Artillery Hornet 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery Generic PLA.json b/OrcaSlicer/system/Artillery/filament/Artillery Generic PLA.json
new file mode 100644
index 0000000..b62b8c8
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery Generic PLA.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "Artillery Generic PLA",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla",
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
+    "compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle",
+		"Artillery Genius 0.4 nozzle",
+		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
+		"Artillery Hornet 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery Generic TPU.json b/OrcaSlicer/system/Artillery/filament/Artillery Generic TPU.json
new file mode 100644
index 0000000..ed02372
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery Generic TPU.json	
@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "filament_id": "GFU99",
+    "setting_id": "GFSA04",
+    "name": "Artillery Generic TPU",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_tpu",
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle",
+		"Artillery Genius 0.4 nozzle",
+		"Artillery Sidewinder X2 0.4 nozzle",
+		"Artillery Genius Pro 0.4 nozzle",
+		"Artillery Hornet 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery PETG.json b/OrcaSlicer/system/Artillery/filament/Artillery PETG.json
new file mode 100644
index 0000000..81f5ea0
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery PETG.json	
@@ -0,0 +1,85 @@
+{	
+	"instantiation": "true",
+	"from": "system",
+    "compatible_printers": [
+		"Artillery Sidewinder X3 Pro 0.4 nozzle",
+		"Artillery Sidewinder X3 Plus 0.4 nozzle",
+		"Artillery Sidewinder X4 Pro 0.4 nozzle",
+		"Artillery Sidewinder X4 Plus 0.4 nozzle"
+    ],
+    "filament_retraction_length": [
+        "1.3"
+    ],
+    "filament_retraction_speed": [
+        "40"
+    ],
+    "filament_settings_id": [
+        "Artillery PETG"
+    ],
+    "filament_start_gcode": [
+        ""
+    ],
+    "filament_type": [
+        "PETG"
+    ],
+    "filament_vendor": [
+        "Artillery"
+    ],
+    "filament_z_hop": [
+        "0.4"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "inherits": "Artillery Generic PLA",
+    "name": "Artillery PETG",
+    "nozzle_temperature": [
+        "250"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "filament_max_volumetric_speed": [
+        "9"
+    ],
+    "temperature_vitrification": [
+        "220"
+    ],
+	"close_fan_the_first_x_layers": [
+        "3"
+    ],
+	"overhang_fan_threshold": [
+        "10%"
+    ],
+	"overhang_fan_speed": [
+        "90"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.05"
+    ],
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery PLA Basic.json b/OrcaSlicer/system/Artillery/filament/Artillery PLA Basic.json
new file mode 100644
index 0000000..2bf6652
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery PLA Basic.json	
@@ -0,0 +1,64 @@
+{
+    "instantiation": "true",
+	"from": "system",
+    "compatible_printers": [
+		"Artillery Sidewinder X3 Pro 0.4 nozzle",
+		"Artillery Sidewinder X3 Plus 0.4 nozzle",
+		"Artillery Sidewinder X4 Pro 0.4 nozzle",
+		"Artillery Sidewinder X4 Plus 0.4 nozzle"
+    ],
+    "filament_retraction_length": [
+        "1.3"
+    ],
+    "filament_retraction_speed": [
+        "40"
+    ],
+    "filament_settings_id": [
+        "Artillery PLA Basic"
+    ],
+    "filament_start_gcode": [
+        ""
+    ],
+    "filament_type": [
+        "PLA Basic"
+    ],
+    "filament_vendor": [
+        "Artillery"
+    ],
+    "filament_z_hop": [
+        "0.4"
+    ],
+    "inherits": "Artillery Generic PLA",
+    "name": "Artillery PLA Basic",
+    "nozzle_temperature": [
+        "210"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "temperature_vitrification": [
+        "190"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.046"
+    ],
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery PLA Matte.json b/OrcaSlicer/system/Artillery/filament/Artillery PLA Matte.json
new file mode 100644
index 0000000..73313c4
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery PLA Matte.json	
@@ -0,0 +1,64 @@
+{
+    "instantiation": "true",
+	"from": "system",
+    "compatible_printers": [
+		"Artillery Sidewinder X3 Pro 0.4 nozzle",
+		"Artillery Sidewinder X3 Plus 0.4 nozzle",
+		"Artillery Sidewinder X4 Pro 0.4 nozzle",
+		"Artillery Sidewinder X4 Plus 0.4 nozzle"
+    ],
+    "filament_retraction_length": [
+        "1.3"
+    ],
+    "filament_retraction_speed": [
+        "40"
+    ],
+    "filament_settings_id": [
+        "Artillery PLA Matte"
+    ],
+    "filament_start_gcode": [
+        ""
+    ],
+    "filament_type": [
+        "PLA Matte"
+    ],
+    "filament_vendor": [
+        "Artillery"
+    ],
+    "filament_z_hop": [
+        "0.4"
+    ],
+    "inherits": "Artillery Generic PLA",
+    "name": "Artillery PLA Matte",
+    "nozzle_temperature": [
+        "210"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "temperature_vitrification": [
+        "190"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.046"
+    ],
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery PLA Silk.json b/OrcaSlicer/system/Artillery/filament/Artillery PLA Silk.json
new file mode 100644
index 0000000..81a37fd
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery PLA Silk.json	
@@ -0,0 +1,64 @@
+{
+    "instantiation": "true",
+	"from": "system",
+    "compatible_printers": [
+		"Artillery Sidewinder X3 Pro 0.4 nozzle",
+		"Artillery Sidewinder X3 Plus 0.4 nozzle",
+		"Artillery Sidewinder X4 Pro 0.4 nozzle",
+		"Artillery Sidewinder X4 Plus 0.4 nozzle"
+    ],
+    "filament_retraction_length": [
+        "1.3"
+    ],
+    "filament_retraction_speed": [
+        "40"
+    ],
+    "filament_settings_id": [
+        "Artillery PLA Silk"
+    ],
+    "filament_start_gcode": [
+        ""
+    ],
+    "filament_type": [
+        "PLA Silk"
+    ],
+    "filament_vendor": [
+        "Artillery"
+    ],
+    "filament_z_hop": [
+        "0.4"
+    ],
+    "inherits": "Artillery Generic PLA",
+    "name": "Artillery PLA Silk",
+    "nozzle_temperature": [
+        "210"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "temperature_vitrification": [
+        "190"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.046"
+    ],
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery PLA Tough.json b/OrcaSlicer/system/Artillery/filament/Artillery PLA Tough.json
new file mode 100644
index 0000000..a417836
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery PLA Tough.json	
@@ -0,0 +1,70 @@
+{
+    "instantiation": "true",
+	"from": "system",
+    "compatible_printers": [
+		"Artillery Sidewinder X3 Pro 0.4 nozzle",
+		"Artillery Sidewinder X3 Plus 0.4 nozzle",
+		"Artillery Sidewinder X4 Pro 0.4 nozzle",
+		"Artillery Sidewinder X4 Plus 0.4 nozzle"
+    ],
+    "filament_retraction_length": [
+        "1.3"
+    ],
+    "filament_retraction_speed": [
+        "40"
+    ],
+    "filament_settings_id": [
+        "Artillery PLA Tough"
+    ],
+    "filament_start_gcode": [
+        ""
+    ],
+    "filament_type": [
+        "PLA Tough"
+    ],
+    "filament_vendor": [
+        "Artillery"
+    ],
+    "filament_z_hop": [
+        "0.4"
+    ],
+    "inherits": "Artillery Generic PLA",
+    "name": "Artillery PLA Tough",
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "temperature_vitrification": [
+        "190"
+    ],
+	"hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.046"
+    ],
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/filament/Artillery TPU.json b/OrcaSlicer/system/Artillery/filament/Artillery TPU.json
new file mode 100644
index 0000000..184e10e
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/Artillery TPU.json	
@@ -0,0 +1,82 @@
+{
+    "instantiation": "true",
+	"from": "system",
+    "compatible_printers": [
+		"Artillery Sidewinder X3 Pro 0.4 nozzle",
+		"Artillery Sidewinder X3 Plus 0.4 nozzle",
+		"Artillery Sidewinder X4 Pro 0.4 nozzle",
+		"Artillery Sidewinder X4 Plus 0.4 nozzle"
+    ],
+    "filament_retraction_length": [
+        "1.3"
+    ],
+    "filament_retraction_speed": [
+        "40"
+    ],
+    "filament_settings_id": [
+        "Artillery TPU"
+    ],
+    "filament_start_gcode": [
+        ""
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "filament_vendor": [
+        "Artillery"
+    ],
+    "filament_z_hop": [
+        "0.4"
+    ],
+    "hot_plate_temp": [
+        "45"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "45"
+    ],
+    "inherits": "Artillery Generic PLA",
+    "name": "Artillery TPU",
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_max_volumetric_speed": [
+        "3.6"
+    ],
+    "temperature_vitrification": [
+        "190"
+    ],
+	"filament_density": [
+        "1.22"
+    ],
+	"overhang_fan_threshold": [
+        "95%"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.06"
+    ],
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/filament/fdm_filament_abs.json b/OrcaSlicer/system/Artillery/filament/fdm_filament_abs.json
new file mode 100644
index 0000000..7e478a3
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/fdm_filament_abs.json
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_abs",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "105"
+    ],
+    "eng_plate_temp" : [
+        "105"
+    ],
+    "hot_plate_temp" : [
+        "105"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "filament_max_volumetric_speed": [
+        "28.6"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/fdm_filament_asa.json b/OrcaSlicer/system/Artillery/filament/fdm_filament_asa.json
new file mode 100644
index 0000000..29a752a
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/fdm_filament_asa.json
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_asa",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "105"
+    ],
+    "eng_plate_temp" : [
+        "105"
+    ],
+    "hot_plate_temp" : [
+        "105"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "35"
+    ],
+    "filament_max_volumetric_speed": [
+        "28.6"
+    ],
+    "filament_type": [
+        "ASA"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/fdm_filament_common.json b/OrcaSlicer/system/Artillery/filament/fdm_filament_common.json
new file mode 100644
index 0000000..5212d44
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/fdm_filament_common.json
@@ -0,0 +1,135 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "0"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "0"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_settings_id": [
+        ""
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_vendor": [
+        "Generic"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "35"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/fdm_filament_pet.json b/OrcaSlicer/system/Artillery/filament/fdm_filament_pet.json
new file mode 100644
index 0000000..2f98be6
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/fdm_filament_pet.json
@@ -0,0 +1,76 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pet",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "0"
+    ],
+    "hot_plate_temp" : [
+        "80"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "80"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "filament_max_volumetric_speed": [
+        "25"
+    ],
+    "filament_type": [
+        "PETG"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "temperature_vitrification": [
+        "80"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/fdm_filament_pla.json b/OrcaSlicer/system/Artillery/filament/fdm_filament_pla.json
new file mode 100644
index 0000000..de2f3c2
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/fdm_filament_pla.json
@@ -0,0 +1,88 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pla",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "cool_plate_temp" : [
+        "35"
+    ],
+    "eng_plate_temp" : [
+        "0"
+    ],
+    "hot_plate_temp" : [
+        "45"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "35"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "45"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/filament/fdm_filament_tpu.json b/OrcaSlicer/system/Artillery/filament/fdm_filament_tpu.json
new file mode 100644
index 0000000..d5cc57f
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/filament/fdm_filament_tpu.json
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_tpu",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "30"
+    ],
+    "eng_plate_temp" : [
+        "30"
+    ],
+    "hot_plate_temp" : [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "30"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "30"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "35"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Genius 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Genius 0.4 nozzle.json
new file mode 100644
index 0000000..13d4ce8
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Genius 0.4 nozzle.json	
@@ -0,0 +1,116 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "Artillery Genius 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Genius",
+    "default_print_profile": "0.20mm Standard @Artillery Genius",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "bed_exclude_area": [
+      "0x0"
+    ],
+    "printable_area": [
+      "0x0",
+      "220x0",
+      "220x220",
+      "0x220"
+    ],
+    "printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_travel": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"2000",
+		"1000"
+	],
+	"machine_max_acceleration_y": [
+		"2000",
+		"1000"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_e": [
+		"120",
+		"120"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_z": [
+		"12",
+		"12"
+	],
+	"machine_max_jerk_e": [
+		"3",
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"7",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"7",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.2",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Artillery",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"4"
+	],
+	"retraction_speed": [
+		"35"
+	],
+	"deretraction_speed": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Artillery Generic PLA"
+	],
+    "machine_start_gcode": "M83; extruder relative mode\nG28; home all axes\nM109 S[nozzle_temperature_initial_layer]; hotend temperature\nM140 S[bed_temperature_initial_layer_single]; heatbed temperature\nM190 S[bed_temperature_initial_layer_single]; wait for the bed to heat up\nM109 S[nozzle_temperature_initial_layer]; wait for the extruder to heat up\nG92 E0; reset extruder\nG1 X20 Y5 Z0.3 F5000.0; move to start-line position\nG1 Z0.3 F1000; print height\nG1 X200 Y5 F1500.0 E15; draw 1st line\nG1 X200 Y5.3 Z0.3 F5000.0; move to side a little\nG1 X5.3  Y5.3 Z0.3 F1500.0 E30; draw 2nd line\nG1 Z3 F3000; move z up little to prevent scratching of surface",
+    "machine_end_gcode": "G91; Relative positionning\nG1 E-2 Z0.2 F2400; Retract and raise Z\nG1 X5 Y5 F3000; Wipe out\nG1 Z10; Raise Z more\nG90; Absolute positionning\nG1 X0 Y100; Present print\nM106 S0; Turn-off fan\nM104 S0; Turn-off hotend\nM140 S0; Turn-off bed\nM84 X Y E; Disable all steppers but Z",
+    "layer_change_gcode": "",
+    "scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json
new file mode 100644
index 0000000..c871b99
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "Artillery Genius Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Genius Pro",
+    "default_print_profile": "0.20mm Standard @Artillery Genius Pro",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "bed_exclude_area": [
+      "0x0"
+    ],
+    "printable_area": [
+      "0x0",
+      "220x0",
+      "220x220",
+      "0x220"
+    ],
+    "printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_travel": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"2000",
+		"1000"
+	],
+	"machine_max_acceleration_y": [
+		"2000",
+		"1000"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_e": [
+		"120",
+		"120"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_z": [
+		"12",
+		"12"
+	],
+	"machine_max_jerk_e": [
+		"3",
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"7",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"7",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.2",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Artillery",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"4"
+	],
+	"retraction_speed": [
+		"35"
+	],
+	"deretraction_speed": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Artillery Generic PLA"
+	],
+    "machine_start_gcode": "M83; extruder relative mode\nG28; home all axes\nG29 S12000; bed mesh leveling\nM104 S[nozzle_temperature_initial_layer]; set hotend temperature\nM140 S[bed_temperature_initial_layer_single]; set heatbed temperature\nG90; Absolute Positioning\nG1 Y0 F5000; Move to front\nG1 X0 F5000; Move to origin\nM190 S[bed_temperature_initial_layer_single]; wait for the bed to heat up\nM109 S[nozzle_temperature_initial_layer]; wait for the extruder to heat up\nG92 E0; reset extruder\nG1 X20 Y5 Z0.3 F5000.0; move to start-line position\nG1 Z0.3 F1000; print height\nG1 X200 Y5 F1500.0 E15; draw 1st line\nG1 X200 Y5.3 Z0.3 F5000.0; move to side a little\nG1 X5.3  Y5.3 Z0.3 F1500.0 E30; draw 2nd line\nG1 Z3 F3000; move z up little to prevent scratching of surface",
+    "machine_end_gcode": "G91; Relative positionning\nG1 E-2 Z0.2 F2400; Retract and raise Z\nG1 X5 Y5 F3000; Wipe out\nG1 Z10; Raise Z more\nG90; Absolute positionning\nG1 X0 Y100; Present print\nM106 S0; Turn-off fan\nM104 S0; Turn-off hotend\nM140 S0; Turn-off bed\nM84 X Y E; Disable all steppers but Z",
+    "layer_change_gcode": "",
+    "scan_first_layer": "0"
+}
+  
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Genius Pro.json b/OrcaSlicer/system/Artillery/machine/Artillery Genius Pro.json
new file mode 100644
index 0000000..8f7cbd1
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Genius Pro.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Genius Pro",
+    "model_id": "Artillery-Genius-Pro",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_geniuspro_buildplate_model.stl",
+    "bed_texture": "artillery_geniuspro_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Genius.json b/OrcaSlicer/system/Artillery/machine/Artillery Genius.json
new file mode 100644
index 0000000..e5e4bc9
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Genius.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Genius",
+    "model_id": "Artillery-Genius",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_genius_buildplate_model.stl",
+    "bed_texture": "artillery_genius_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Hornet 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Hornet 0.4 nozzle.json
new file mode 100644
index 0000000..17f7d71
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Hornet 0.4 nozzle.json	
@@ -0,0 +1,115 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "Artillery Hornet 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Hornet",
+    "default_print_profile": "0.20mm Standard @Artillery Hornet",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "bed_exclude_area": [
+      "0x0"
+    ],
+    "printable_area": [
+      "0x0",
+      "230x0",
+      "230x230",
+      "0x230"
+    ],
+    "printable_height": "250",
+	"nozzle_type": "hardened_steel",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_travel": [
+		"1000",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"2000",
+		"1000"
+	],
+	"machine_max_acceleration_y": [
+		"2000",
+		"1000"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_e": [
+		"120",
+		"120"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_z": [
+		"12",
+		"12"
+	],
+	"machine_max_jerk_e": [
+		"3",
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"7",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"7",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.2",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Artillery",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"2.2"
+	],
+	"retract_length_toolchange": [
+		"10"
+	],
+	"deretraction_speed": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Artillery Generic PLA"
+	],
+    "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{hot_plate_temp_initial_layer[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{nozzle_temperature_initial_layer[0]} ; set final nozzle temp\nM190 S{hot_plate_temp_initial_layer[0]} ; wait for bed temp to stabilize\nM109 S{nozzle_temperature_initial_layer[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+    "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "scan_first_layer": "0"
+  }
+  
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Hornet.json b/OrcaSlicer/system/Artillery/machine/Artillery Hornet.json
new file mode 100644
index 0000000..77450f8
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Hornet.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Hornet",
+    "model_id": "Artillery-Hornet",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_hornet_buildplate_model.stl",
+    "bed_texture": "artillery_hornet_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json
new file mode 100644
index 0000000..0bec59f
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "Artillery Sidewinder X1 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Sidewinder X1",
+    "default_print_profile": "0.20mm Standard @Artillery X1",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "bed_exclude_area": [
+      "0x0"
+    ],
+    "printable_area": [
+      "0x0",
+      "300x0",
+      "300x300",
+      "0x300"
+    ],
+    "printable_height": "400",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"1250",
+		"1250"
+	],
+	"machine_max_acceleration_retracting": [
+		"1250",
+		"1250"
+	],
+	"machine_max_acceleration_travel": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_x": [
+		"1000",
+		"960"
+	],
+	"machine_max_acceleration_y": [
+		"1000",
+		"960"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"120",
+		"120"
+	],
+	"machine_max_speed_x": [
+		"200",
+		"100"
+	],
+	"machine_max_speed_y": [
+		"200",
+		"100"
+	],
+	"machine_max_speed_z": [
+		"12",
+		"12"
+	],
+	"machine_max_jerk_e": [
+		"1.5",
+		"1.5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Artillery",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"4"
+	],
+	"retraction_speed": [
+        "35"
+    ],
+	"deretraction_speed": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Artillery Generic PLA"
+	],
+    "machine_start_gcode": "; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[bed_temperature_initial_layer_single] ; wait for bed to heat up\nM104 S[nozzle_temperature_initial_layer] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[nozzle_temperature_initial_layer] ; wait for the nozzle to heat up\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}",
+    "machine_end_gcode": "G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < printable_height}G1 Z{z_offset+min(layer_z+120, printable_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1.json
new file mode 100644
index 0000000..5b992b4
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Sidewinder X1",
+    "model_id": "Artillery-Sidewinder-X1",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_sidewinderx1_buildplate_model.stl",
+    "bed_texture": "artillery_sidewinderx1_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json
new file mode 100644
index 0000000..72bd31d
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "Artillery Sidewinder X2 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Sidewinder X2",
+    "default_print_profile": "0.20mm Standard @Artillery X2",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "bed_exclude_area": [
+      "0x0"
+    ],
+    "printable_area": [
+      "0x0",
+      "300x0",
+      "300x300",
+      "0x300"
+    ],
+    "printable_height": "400",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"1250",
+		"1250"
+	],
+	"machine_max_acceleration_retracting": [
+		"1250",
+		"1250"
+	],
+	"machine_max_acceleration_travel": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_x": [
+		"1000",
+		"960"
+	],
+	"machine_max_acceleration_y": [
+		"1000",
+		"960"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000"
+	],
+	"machine_max_speed_e": [
+		"120",
+		"120"
+	],
+	"machine_max_speed_x": [
+		"200",
+		"100"
+	],
+	"machine_max_speed_y": [
+		"200",
+		"100"
+	],
+	"machine_max_speed_z": [
+		"12",
+		"12"
+	],
+	"machine_max_jerk_e": [
+		"1.5",
+		"1.5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Artillery",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"4"
+	],
+	"retraction_speed": [
+        "35"
+    ],
+	"deretraction_speed": [
+		"0"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Artillery Generic PLA"
+	],
+    "machine_start_gcode": "; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12 ; K factor\nM900 W[line_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[bed_temperature_initial_layer_single] ; wait for bed to heat up\nM104 S[nozzle_temperature_initial_layer] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[nozzle_temperature_initial_layer] ; wait for the nozzle to heat up\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}",
+    "machine_end_gcode": "G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < printable_height}G1 Z{z_offset+min(layer_z+120, printable_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2.json
new file mode 100644
index 0000000..5ecf49d
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Sidewinder X2",
+    "model_id": "Artillery-Sidewinder-X2",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_sidewinderx2_buildplate_model.stl",
+    "bed_texture": "artillery_sidewinderx2_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..d1e6d9b
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json	
@@ -0,0 +1,229 @@
+{
+    "type": "machine",
+    "setting_id": "GM005",
+    "name": "Artillery Sidewinder X3 Plus 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Sidewinder X3 Plus",
+    "default_print_profile": "0.20mm Standard @Artillery Genius",
+    "default_filament_profile": [
+        "Artillery PLA Basic"
+    ],
+    "printer_settings_id": "Artillery X3Plus 0.4 nozzle",
+    "adaptive_bed_mesh_margin": "0",
+    "auxiliary_fan": "0",
+    "bbl_use_printhost": "0",
+    "bed_custom_model": "",
+    "bed_custom_texture": "",
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "bed_mesh_max": "99999,99999",
+    "bed_mesh_min": "-99999,-99999",
+    "bed_mesh_probe_distance": "50,50",
+    "before_layer_change_gcode": "\n",
+    "best_object_pos": "0.5,0.5",
+    "change_extrusion_role_gcode": "",
+    "change_filament_gcode": "",
+    "cooling_tube_length": "5",
+    "cooling_tube_retraction": "91.5",
+    "deretraction_speed": [
+        "0"
+    ],
+    "disable_m73": "0",
+    "emit_machine_limits_to_gcode": "0",
+    "enable_filament_ramming": "1",
+    "extra_loading_move": "-2",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_radius": "65",
+    "extruder_colour": [
+        "#018001"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "fan_kickstart": "0",
+    "fan_speedup_overhangs": "1",
+    "fan_speedup_time": "0",
+    "gcode_flavor": "marlin",
+    "head_wrap_detect_zone": [],
+    "high_current_on_filament_swap": "0",
+    "host_type": "octoprint",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "",
+    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM211 S1",
+    "machine_load_filament_time": "0",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "3000",
+        "1250"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000",
+        "1250"
+    ],
+    "machine_max_acceleration_travel": [
+        "1000",
+        "1250"
+    ],
+    "machine_max_acceleration_x": [
+        "3000",
+        "1000"
+    ],
+    "machine_max_acceleration_y": [
+        "3000",
+        "1000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "3",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "7",
+        "10"
+    ],
+    "machine_max_jerk_y": [
+        "7",
+        "10"
+    ],
+    "machine_max_jerk_z": [
+        "0.2",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "120",
+        "120"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "machine_pause_gcode": "M600",
+    "machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
+    "machine_unload_filament_time": "0",
+    "manual_filament_change": "0",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "nozzle_hrc": "0",
+    "nozzle_type": "brass",
+    "nozzle_volume": "0",
+    "parking_pos_retraction": "92",
+    "preferred_orientation": "0",
+    "print_host": "",
+    "print_host_webui": "",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x305",
+        "0x305"
+    ],
+    "printable_height": "400",
+    "printer_notes": "",
+    "printer_structure": "undefine",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "printhost_apikey": "",
+    "printhost_authorization_type": "key",
+    "printhost_cafile": "",
+    "printhost_password": "",
+    "printhost_port": "",
+    "printhost_ssl_ignore_revoke": "0",
+    "printhost_user": "",
+    "printing_by_object_gcode": "",
+    "purge_in_prime_tower": "1",
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "0"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "2.2"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "scan_first_layer": "0",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "support_multi_bed_types": "0",
+    "template_custom_gcode": "",
+    "thumbnails": [
+        "300x300"
+    ],
+    "thumbnails_format": "PNG",
+    "time_cost": "0",
+    "time_lapse_gcode": "",
+    "upward_compatible_machine": [],
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "0",
+    "version": "2.0.2.0",
+    "wipe": [
+        "0"
+    ],
+    "wipe_distance": [
+        "1"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Normal Lift"
+    ],
+    "z_offset": "0"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus.json
new file mode 100644
index 0000000..16a1935
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Sidewinder X3 Plus",
+    "model_id": "Artillery-Sidewinder-X3-Plus",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_sidewinderx3plus_buildplate_model.stl",
+    "bed_texture": "",
+    "hotend_model": "",
+    "default_materials": "Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA Tough;Artillery PETG;Artillery TPU;Artillery ABS;"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json
new file mode 100644
index 0000000..42b0fcb
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json	
@@ -0,0 +1,230 @@
+{
+    "type": "machine",
+    "setting_id": "GM004",
+    "name": "Artillery Sidewinder X3 Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Sidewinder X3 Pro",
+    "default_print_profile": "0.20mm Standard @Artillery Genius",
+    "printer_settings_id": "Artillery X3 Pro 0.4 nozzle",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "default_filament_profile": [
+		"Artillery PLA Basic"
+	],
+    "adaptive_bed_mesh_margin": "0",
+    "auxiliary_fan": "0",
+    "bbl_use_printhost": "0",
+    "bed_custom_model": "",
+    "bed_custom_texture": "",
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "bed_mesh_max": "99999,99999",
+    "bed_mesh_min": "-99999,-99999",
+    "bed_mesh_probe_distance": "50,50",
+    "before_layer_change_gcode": "",
+    "best_object_pos": "0.5,0.5",
+    "change_extrusion_role_gcode": "",
+    "change_filament_gcode": "",
+    "cooling_tube_length": "5",
+    "cooling_tube_retraction": "91.5",
+    "deretraction_speed": [
+        "0"
+    ],
+    "disable_m73": "0",
+    "emit_machine_limits_to_gcode": "0",
+    "enable_filament_ramming": "0",
+    "extra_loading_move": "-2",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_radius": "65",
+    "extruder_colour": [
+        "#018001"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "fan_kickstart": "0",
+    "fan_speedup_overhangs": "1",
+    "fan_speedup_time": "0",
+    "gcode_flavor": "marlin2",
+    "head_wrap_detect_zone": [],
+    "high_current_on_filament_swap": "0",
+    "host_type": "octoprint",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "",
+    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM211 S1",
+    "machine_load_filament_time": "0",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "3000",
+        "1250"
+    ],
+    "machine_max_acceleration_retracting": [
+        "3000",
+        "1250"
+    ],
+    "machine_max_acceleration_travel": [
+        "3000",
+        "1250"
+    ],
+    "machine_max_acceleration_x": [
+        "3000",
+        "1000"
+    ],
+    "machine_max_acceleration_y": [
+        "3000",
+        "1000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "3",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "7",
+        "10"
+    ],
+    "machine_max_jerk_y": [
+        "7",
+        "10"
+    ],
+    "machine_max_jerk_z": [
+        "0.2",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "120",
+        "120"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "machine_pause_gcode": "M600",
+    "machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
+    "machine_unload_filament_time": "0",
+    "manual_filament_change": "0",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "nozzle_hrc": "0",
+    "nozzle_type": "brass",
+    "nozzle_volume": "0",
+    "parking_pos_retraction": "92",
+    "preferred_orientation": "0",
+    "print_host": "",
+    "print_host_webui": "",
+    "printable_area": [
+        "0x0",
+        "240x0",
+        "240x245",
+        "0x245"
+    ],
+    "printable_height": "260",
+    "printer_notes": "",
+    "printer_structure": "undefine",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "printhost_apikey": "",
+    "printhost_authorization_type": "key",
+    "printhost_cafile": "",
+    "printhost_password": "",
+    "printhost_port": "",
+    "printhost_ssl_ignore_revoke": "0",
+    "printhost_user": "",
+    "printing_by_object_gcode": "",
+    "purge_in_prime_tower": "0",
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "0"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "2.2"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "scan_first_layer": "0",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "support_multi_bed_types": "0",
+    "template_custom_gcode": "",
+    "thumbnails": [
+        "300x300"
+    ],
+    "thumbnails_format": "PNG",
+    "time_cost": "0",
+    "time_lapse_gcode": "",
+    "upward_compatible_machine": [],
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "0",
+    "version": "2.0.2.0",
+    "wipe": [
+        "0"
+    ],
+    "wipe_distance": [
+        "1"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Normal Lift"
+    ],
+    "z_offset": "0"
+  }
+  
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro.json
new file mode 100644
index 0000000..ac7c20b
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Sidewinder X3 Pro",
+    "model_id": "Artillery-Sidewinder-X3-Pro",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_sidewinderx3pro_buildplate_model.stl",
+    "bed_texture": "",
+    "hotend_model": "",
+    "default_materials": "Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA Tough;Artillery PETG;Artillery TPU;Artillery ABS;"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..e914ad2
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json	
@@ -0,0 +1,229 @@
+{
+    "type": "machine",
+    "setting_id": "GM006",
+    "name": "Artillery Sidewinder X4 Plus 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Sidewinder X4 Plus",
+    "printer_settings_id": "Artillery X4Plus 0.4 nozzle",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "default_filament_profile": [
+        "Artillery PLA Basic"
+    ],
+    "adaptive_bed_mesh_margin": "0",
+    "auxiliary_fan": "0",
+    "bbl_use_printhost": "0",
+    "bed_custom_model": "",
+    "bed_custom_texture": "",
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "bed_mesh_max": "99999,99999",
+    "bed_mesh_min": "-99999,-99999",
+    "bed_mesh_probe_distance": "50,50",
+    "before_layer_change_gcode": "\n",
+    "best_object_pos": "0.5,0.5",
+    "change_extrusion_role_gcode": "",
+    "change_filament_gcode": "",
+    "cooling_tube_length": "5",
+    "cooling_tube_retraction": "91.5",
+    "default_print_profile": "0.20mm Standard @Artillery Genius",
+    "deretraction_speed": [
+        "0"
+    ],
+    "disable_m73": "0",
+    "emit_machine_limits_to_gcode": "0",
+    "enable_filament_ramming": "1",
+    "extra_loading_move": "-2",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_radius": "65",
+    "extruder_colour": [
+        "#018001"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "fan_kickstart": "0",
+    "fan_speedup_overhangs": "1",
+    "fan_speedup_time": "0",
+    "gcode_flavor": "klipper",
+    "head_wrap_detect_zone": [],
+    "high_current_on_filament_swap": "0",
+    "host_type": "octoprint",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "G92 E0",
+    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y305 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+    "machine_load_filament_time": "0",
+    "machine_max_acceleration_e": [
+        "6000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "6000",
+        "1250"
+    ],
+    "machine_max_acceleration_retracting": [
+        "6000",
+        "1250"
+    ],
+    "machine_max_acceleration_travel": [
+        "1000",
+        "1250"
+    ],
+    "machine_max_acceleration_x": [
+        "6000",
+        "1000"
+    ],
+    "machine_max_acceleration_y": [
+        "6000",
+        "1000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "3",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "7",
+        "10"
+    ],
+    "machine_max_jerk_y": [
+        "7",
+        "10"
+    ],
+    "machine_max_jerk_z": [
+        "0.2",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "120",
+        "120"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "machine_pause_gcode": "M600",
+    "machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X230 Y300 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y20  F4000\nG1 X230 F4000\nG1 Z-1  F600 \nG1 X270 F4000\nG1 Y25  F4000\nG1 X230 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=300\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X200 Y0.8 Z0.3 F1800.0 E20.0;draw line\nG92 E0\nG1 X200 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X100 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X100 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X180 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X180 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0",
+    "machine_unload_filament_time": "0",
+    "manual_filament_change": "0",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "nozzle_hrc": "0",
+    "nozzle_type": "brass",
+    "nozzle_volume": "0",
+    "parking_pos_retraction": "92",
+    "preferred_orientation": "0",
+    "print_host": "192.168.0.249",
+    "print_host_webui": "",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x310",
+        "0x310"
+    ],
+    "printable_height": "400",
+    "printer_notes": "",
+    "printer_structure": "undefine",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "printhost_apikey": "",
+    "printhost_authorization_type": "key",
+    "printhost_cafile": "",
+    "printhost_password": "",
+    "printhost_port": "",
+    "printhost_ssl_ignore_revoke": "0",
+    "printhost_user": "",
+    "printing_by_object_gcode": "",
+    "purge_in_prime_tower": "1",
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "0"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "1.3"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "scan_first_layer": "0",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "support_multi_bed_types": "0",
+    "template_custom_gcode": "",
+    "thumbnails": [
+        "300x300"
+    ],
+    "thumbnails_format": "PNG",
+    "time_cost": "0",
+    "time_lapse_gcode": "",
+    "upward_compatible_machine": [],
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "1",
+    "version": "2.0.2.0",
+    "wipe": [
+        "0"
+    ],
+    "wipe_distance": [
+        "1"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Normal Lift"
+    ],
+    "z_offset": "0"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus.json
new file mode 100644
index 0000000..7fcb399
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Sidewinder X4 Plus",
+    "model_id": "Artillery-Sidewinder-X4-Plus",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_sidewinderx4plus_buildplate_model.stl",
+    "bed_texture": "",
+    "hotend_model": "",
+    "default_materials": "Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA Tough;Artillery PETG;Artillery TPU;Artillery ABS;"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json
new file mode 100644
index 0000000..1e4826e
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json	
@@ -0,0 +1,229 @@
+{
+    "type": "machine",
+    "setting_id": "GM007",
+    "name": "Artillery Sidewinder X4 Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Artillery Sidewinder X4 Pro",
+    "printer_settings_id": "Artillery X4Pro 0.4 nozzle",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "default_filament_profile": [
+        "Artillery PLA Basic"
+    ],
+    "adaptive_bed_mesh_margin": "0",
+    "auxiliary_fan": "0",
+    "bbl_use_printhost": "0",
+    "bed_custom_model": "",
+    "bed_custom_texture": "",
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "bed_mesh_max": "99999,99999",
+    "bed_mesh_min": "-99999,-99999",
+    "bed_mesh_probe_distance": "50,50",
+    "before_layer_change_gcode": "\n",
+    "best_object_pos": "0.5,0.5",
+    "change_extrusion_role_gcode": "",
+    "change_filament_gcode": "",
+    "cooling_tube_length": "5",
+    "cooling_tube_retraction": "91.5",
+    "default_print_profile": "0.20mm Standard @Artillery Genius",
+    "deretraction_speed": [
+        "0"
+    ],
+    "disable_m73": "0",
+    "emit_machine_limits_to_gcode": "0",
+    "enable_filament_ramming": "1",
+    "extra_loading_move": "-2",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_radius": "65",
+    "extruder_colour": [
+        "#018001"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "fan_kickstart": "0",
+    "fan_speedup_overhangs": "1",
+    "fan_speedup_time": "0",
+    "gcode_flavor": "klipper",
+    "head_wrap_detect_zone": [],
+    "high_current_on_filament_swap": "0",
+    "host_type": "octoprint",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "G92 E0",
+    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y250  F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+    "machine_load_filament_time": "0",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "6000",
+        "1250"
+    ],
+    "machine_max_acceleration_retracting": [
+        "6000",
+        "1250"
+    ],
+    "machine_max_acceleration_travel": [
+        "1000",
+        "1250"
+    ],
+    "machine_max_acceleration_x": [
+        "6000",
+        "1000"
+    ],
+    "machine_max_acceleration_y": [
+        "6000",
+        "1000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "3",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "7",
+        "10"
+    ],
+    "machine_max_jerk_y": [
+        "7",
+        "10"
+    ],
+    "machine_max_jerk_z": [
+        "0.2",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "120",
+        "120"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "machine_pause_gcode": "M600",
+    "machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X180 Y247 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y11 F4000\nG1 X180 F4000\nG1 Z-1 F600 \nG1 X230 F4000\nG1 Y15 F4000\nG1 X180 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=247\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X170 Y0.8 Z0.3 F1800.0 E17.0;draw line\nG92 E0\nG1 X170 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X70 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X70 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X150 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X150 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0\n",
+    "machine_unload_filament_time": "0",
+    "manual_filament_change": "0",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "nozzle_hrc": "0",
+    "nozzle_type": "brass",
+    "nozzle_volume": "0",
+    "parking_pos_retraction": "92",
+    "preferred_orientation": "0",
+    "print_host": "192.168.0.249",
+    "print_host_webui": "",
+    "printable_area": [
+        "0x0",
+        "240x0",
+        "240x250",
+        "0x250"
+    ],
+    "printable_height": "260",
+    "printer_notes": "",
+    "printer_structure": "undefine",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "printhost_apikey": "",
+    "printhost_authorization_type": "key",
+    "printhost_cafile": "",
+    "printhost_password": "",
+    "printhost_port": "",
+    "printhost_ssl_ignore_revoke": "0",
+    "printhost_user": "",
+    "printing_by_object_gcode": "",
+    "purge_in_prime_tower": "1",
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "0"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "1.3"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "scan_first_layer": "0",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "support_multi_bed_types": "0",
+    "template_custom_gcode": "",
+    "thumbnails": [
+        "300x300"
+    ],
+    "thumbnails_format": "PNG",
+    "time_cost": "0",
+    "time_lapse_gcode": "",
+    "upward_compatible_machine": [],
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "1",
+    "version": "2.0.2.0",
+    "wipe": [
+        "0"
+    ],
+    "wipe_distance": [
+        "1"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Normal Lift"
+    ],
+    "z_offset": "0"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro.json b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro.json
new file mode 100644
index 0000000..b16b568
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Artillery Sidewinder X4 Pro",
+    "model_id": "Artillery-Sidewinder-X4-Pro",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Artillery",
+    "bed_model": "artillery_sidewinderx4pro_buildplate_model.stl",
+    "bed_texture": "",
+    "hotend_model": "",
+    "default_materials": "Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA Tough;Artillery PETG;Artillery TPU;Artillery ABS;"
+}
diff --git a/OrcaSlicer/system/Artillery/machine/fdm_machine_common.json b/OrcaSlicer/system/Artillery/machine/fdm_machine_common.json
new file mode 100644
index 0000000..829d928
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/machine/fdm_machine_common.json
@@ -0,0 +1,139 @@
+{
+    "type": "machine",
+    "name": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "gcode_flavor": "marlin",
+    "machine_start_gcode": "",
+    "machine_end_gcode": "",
+    "extruder_colour": [
+        "#018001"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "3000",
+        "3000"
+    ],
+    "machine_max_acceleration_x": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_acceleration_y": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_acceleration_z": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_speed_e": [
+        "25",
+        "25"
+    ],
+    "machine_max_speed_x": [
+        "300",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "300",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_jerk_e": [
+        "1.5",
+        "1.5"
+    ],
+    "machine_max_jerk_x": [
+        "8",
+        "8"
+    ],
+    "machine_max_jerk_y": [
+        "8",
+        "8"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printable_height": "400",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retract_length_toolchange": [
+        "2"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "deretraction_speed": [
+        "30"
+    ],
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "machine_pause_gcode": "M400 U1\n",
+    "wipe": [
+        "0"
+    ],
+    "z_hop_types": "Normal Lift"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..af4db28
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,14 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "internal_solid_infill_line_width": "0.42",
+    "layer_height": "0.08",
+    "name": "0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_line_width": "0.42",
+    "print_settings_id": "0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.info b/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.info
new file mode 100644
index 0000000..2baf1ac
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 0
diff --git a/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..5ddb03c
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "internal_solid_infill_line_width": "0.42",
+    "layer_height": "0.08",
+    "name": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle",
+    "outer_wall_line_width": "0.42",
+    "print_settings_id": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..efd2a72
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"from": "system",
+	"instantiation": "true",    
+    "default_acceleration": "3000",
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "120",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "150",
+    "layer_height": "0.08",
+    "name": "0.08mm High Quality @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.08mm High Quality @Artillery X4Plus 0.4 nozzle",
+    "sparse_infill_speed": "150",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..aa0930c
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "from": "system",
+	"instantiation": "true",
+    "default_acceleration": "3000",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "120",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "150",
+    "layer_height": "0.08",
+    "name": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle",
+    "sparse_infill_speed": "150",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..1788f71
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,14 @@
+{
+	"from": "system",
+	"instantiation": "true",    
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "internal_solid_infill_line_width": "0.42",
+    "layer_height": "0.12",
+    "name": "0.12mm Fine @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_line_width": "0.42",
+    "print_settings_id": "0.12mm Fine @Artillery X4Plus 0.4 nozzle",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..5c9c9fe
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,14 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "internal_solid_infill_line_width": "0.42",
+    "layer_height": "0.12",
+    "name": "0.12mm Fine @Artillery X4Pro 0.4 nozzle",
+    "outer_wall_line_width": "0.42",
+    "print_settings_id": "0.12mm Fine @Artillery X4Pro 0.4 nozzle",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..9e8a9c0
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"from": "system",
+	"instantiation": "true",    
+    "default_acceleration": "3000",
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "180",
+    "layer_height": "0.12",
+    "name": "0.12mm High Quality @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.12mm High Quality @Artillery X4Plus 0.4 nozzle",
+    "sparse_infill_speed": "180",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..9398afd
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "default_acceleration": "3000",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "120",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "150",
+    "layer_height": "0.12",
+    "name": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle",
+    "sparse_infill_speed": "150",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json b/OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json
new file mode 100644
index 0000000..59155ff
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.15mm Optimal @Artillery Genius Pro",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.15",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius Pro 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius.json b/OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius.json
new file mode 100644
index 0000000..3d799e5
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.15mm Optimal @Artillery Genius",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.15",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..3e2d8e1
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"from": "system",
+	"instantiation": "true",    
+    "default_acceleration": "3000",
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "180",
+    "layer_height": "0.16",
+    "name": "0.16mm High Quality @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.16mm High Quality @Artillery X4Plus 0.4 nozzle",
+    "sparse_infill_speed": "180",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..9306e63
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "default_acceleration": "3000",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "180",
+    "layer_height": "0.16",
+    "name": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle",
+    "sparse_infill_speed": "180",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery Hornet.json b/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery Hornet.json
new file mode 100644
index 0000000..06268f6
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery Hornet.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Artillery Hornet",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Hornet 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X1.json b/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X1.json
new file mode 100644
index 0000000..1b92d76
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X1.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Artillery X1",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..38d3d16
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,18 @@
+{
+	"from": "system",
+	"instantiation": "true",    
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "180",
+    "layer_height": "0.16",
+    "name": "0.16mm Optimal @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.16mm Optimal @Artillery X4Plus 0.4 nozzle",
+    "sparse_infill_speed": "180",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..0268b2b
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,16 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "180",
+    "layer_height": "0.16",
+    "name": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle",
+    "outer_wall_line_width": "0.42",
+    "print_settings_id": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle",
+    "sparse_infill_speed": "180",
+    "support_line_width": "0.42",
+    "top_surface_line_width": "0.42",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius Pro.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius Pro.json
new file mode 100644
index 0000000..1563fca
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius Pro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery Genius Pro",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius Pro 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius.json
new file mode 100644
index 0000000..0c46ef2
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery Genius",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Hornet.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Hornet.json
new file mode 100644
index 0000000..6fe69f9
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Hornet.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery Hornet",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Hornet 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X1.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X1.json
new file mode 100644
index 0000000..8089fc8
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X1.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery X1",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X2.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X2.json
new file mode 100644
index 0000000..6d8f5f6
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery X2",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Sidewinder X2 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json
new file mode 100644
index 0000000..49365c0
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json	
@@ -0,0 +1,285 @@
+{
+    "from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "7",
+    "bottom_shell_thickness": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "1",
+    "bridge_no_support": "0",
+    "bridge_speed": "70",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0",
+    "brim_type": "auto_brim",
+    "brim_width": "0",
+    "compatible_printers": [
+        "Artillery Sidewinder X3 Plus 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "3000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "1",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_X3Plus.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "everywhere",
+    "gap_infill_speed": "30",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "0",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": "500",
+    "initial_layer_infill_speed": "30",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.25",
+    "initial_layer_speed": "30",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "0",
+    "inner_wall_jerk": "9",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "100",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": "150",
+    "ironing_angle": "-1",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "is_custom_defined": "0",
+    "is_infill_first": "0",
+    "layer_height": "0.2",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "3",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "10",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "name": "0.20mm Standard @Artillery X3Plus 0.4 nozzle",
+    "notes": "",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "1500",
+    "outer_wall_jerk": "9",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
+    "prime_tower_width": "60",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "print_settings_id": "0.20mm Standard @Artillery X3Plus 0.4 nozzle",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "10%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "0",
+    "slowdown_for_curled_perimeters": "0",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": [
+        "0,0",
+        "\n0.2,0.4444",
+        "\n0.4,0.6145",
+        "\n0.6,0.7059",
+        "\n0.8,0.7619",
+        "\n1.5,0.8571",
+        "\n2,0.8889",
+        "\n3,0.9231",
+        "\n5,0.9520",
+        "\n10,1"
+    ],
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "150",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "1",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "1",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "3",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "60",
+    "support_style": "grid",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.2",
+    "support_type": "normal(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "0",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": "150",
+    "travel_acceleration": "0",
+    "travel_jerk": "12",
+    "travel_speed": "250",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "version": "2.0.2.0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_loops": "3",
+    "wall_sequence": "inner wall/outer wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0",
+	"top_bottom_infill_wall_overlap":"15%"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json
new file mode 100644
index 0000000..c314340
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json	
@@ -0,0 +1,285 @@
+{
+    "from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "7",
+    "bottom_shell_thickness": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "1",
+    "bridge_no_support": "0",
+    "bridge_speed": "50",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0",
+    "brim_type": "auto_brim",
+    "brim_width": "0",
+    "compatible_printers": [
+        "Artillery Sidewinder X3 Pro 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "3000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "1",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_X3Pro.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "everywhere",
+    "gap_infill_speed": "30",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "0",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": "500",
+    "initial_layer_infill_speed": "30",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.25",
+    "initial_layer_speed": "30",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "3000",
+    "inner_wall_jerk": "9",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "100",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": "150",
+    "ironing_angle": "-1",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "is_custom_defined": "0",
+    "is_infill_first": "0",
+    "layer_height": "0.2",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "3",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "10",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "name": "0.20mm Standard @Artillery X3Pro 0.4 nozzle",
+    "notes": "",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "1500",
+    "outer_wall_jerk": "9",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
+    "prime_tower_width": "60",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "print_settings_id": "0.20mm Standard @Artillery X3Pro 0.4 nozzle",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "10%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "0",
+    "slowdown_for_curled_perimeters": "1",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": [
+        "0,0",
+        "\n0.2,0.4444",
+        "\n0.4,0.6145",
+        "\n0.6,0.7059",
+        "\n0.8,0.7619",
+        "\n1.5,0.8571",
+        "\n2,0.8889",
+        "\n3,0.9231",
+        "\n5,0.9520",
+        "\n10,1"
+    ],
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "150",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "1",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "1",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "3",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "60",
+    "support_style": "grid",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.2",
+    "support_type": "normal(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "500",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": "30",
+    "travel_acceleration": "3000",
+    "travel_jerk": "12",
+    "travel_speed": "300",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "version": "2.0.2.0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_loops": "3",
+    "wall_sequence": "outer wall/inner wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0",
+	"top_bottom_infill_wall_overlap":"15%"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..57ff0fa
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,285 @@
+{
+    "from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "7",
+    "bottom_shell_thickness": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "1",
+    "bridge_no_support": "0",
+    "bridge_speed": "70",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0",
+    "brim_type": "auto_brim",
+    "brim_width": "0",
+    "compatible_printers": [
+        "Artillery Sidewinder X4 Plus 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "5000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "1",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_X4Plus.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "everywhere",
+    "gap_infill_speed": "30",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "0",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": "0",
+    "initial_layer_infill_speed": "30",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "30",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "0",
+    "inner_wall_jerk": "9",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "200",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": "300",
+    "ironing_angle": "-1",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "is_custom_defined": "0",
+    "is_infill_first": "0",
+    "layer_height": "0.2",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "3",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "10",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "name": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "notes": "",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "5000",
+    "outer_wall_jerk": "9",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "100",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
+    "prime_tower_width": "60",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "print_settings_id": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "10%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "0",
+    "slowdown_for_curled_perimeters": "0",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": [
+        "0,0",
+        "\n0.2,0.4444",
+        "\n0.4,0.6145",
+        "\n0.6,0.7059",
+        "\n0.8,0.7619",
+        "\n1.5,0.8571",
+        "\n2,0.8889",
+        "\n3,0.9231",
+        "\n5,0.9520",
+        "\n10,1"
+    ],
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "200",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "1",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "1",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "3",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "60",
+    "support_style": "grid",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.2",
+    "support_type": "normal(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "0",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": "100",
+    "travel_acceleration": "0",
+    "travel_jerk": "12",
+    "travel_speed": "300",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "version": "2.0.2.0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_loops": "2",
+    "wall_sequence": "inner wall/outer wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0",
+	"top_bottom_infill_wall_overlap":"15%"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.info b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.info
new file mode 100644
index 0000000..2baf1ac
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 0
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..0566900
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,286 @@
+{
+    "from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "7",
+    "bottom_shell_thickness": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "1",
+    "bridge_no_support": "0",
+    "bridge_speed": "70",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0",
+    "brim_type": "auto_brim",
+    "brim_width": "0",
+    "compatible_printers": [
+        "Artillery Sidewinder X4 Pro 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "5000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "1",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_X4Pro.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "everywhere",
+    "gap_infill_speed": "30",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "0",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": "0",
+    "initial_layer_infill_speed": "30",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "30",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "0",
+    "inner_wall_jerk": "9",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "200",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": "300",
+    "ironing_angle": "-1",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "is_custom_defined": "0",
+    "is_infill_first": "0",
+    "layer_height": "0.2",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "3",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "10",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "name": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "notes": "",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "5000",
+    "outer_wall_jerk": "9",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "100",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
+    "prime_tower_width": "60",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "print_settings_id": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "10%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "0",
+    "slowdown_for_curled_perimeters": "0",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": [
+        "0,0",
+        "\n0.2,0.4444",
+        "\n0.4,0.6145",
+        "\n0.6,0.7059",
+        "\n0.8,0.7619",
+        "\n1.5,0.8571",
+        "\n2,0.8889",
+        "\n3,0.9231",
+        "\n5,0.9520",
+        "\n10,1"
+    ],
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "200",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "1",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "1",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "3",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "60",
+    "support_style": "grid",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.2",
+    "support_type": "normal(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "0",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": "100",
+    "travel_acceleration": "0",
+    "travel_jerk": "12",
+    "travel_speed": "300",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "version": "2.0.2.0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_loops": "2",
+    "wall_sequence": "inner wall/outer wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0",
+	"top_bottom_infill_wall_overlap":"15%"
+}
+    
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..0d5a5dd
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,10 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "name": "0.20mm Strength @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.20mm Strength @Artillery X4Plus 0.4 nozzle",
+    "version": "2.0.2.0",
+    "wall_loops": "6"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..e5d9596
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,10 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "name": "0.20mm Strength @Artillery X4Pro 0.4 nozzle",
+    "outer_wall_speed": "60",
+    "print_settings_id": "0.20mm Strength @Artillery X4Pro 0.4 nozzle",
+    "version": "2.0.2.0",
+    "wall_loops": "6"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery Hornet.json b/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery Hornet.json
new file mode 100644
index 0000000..cf7f73c
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery Hornet.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Artillery Hornet",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.24",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Hornet 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X1.json b/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X1.json
new file mode 100644
index 0000000..95d1bc0
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X1.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Artillery X1",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.24",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..1b579d2
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,11 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "name": "0.24mm Draft @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_speed": "120",
+    "print_settings_id": "0.24mm Draft @Artillery X4Plus 0.4 nozzle",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..1413321
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,10 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "name": "0.24mm Draft @Artillery X4Pro 0.4 nozzle",
+    "print_settings_id": "0.24mm Draft @Artillery X4Pro 0.4 nozzle",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius Pro.json b/OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius Pro.json
new file mode 100644
index 0000000..78ea01f
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius Pro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.25mm Draft @Artillery Genius Pro",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.25",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "2",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.25",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "2",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius Pro 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius.json b/OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius.json
new file mode 100644
index 0000000..77b9468
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.25mm Draft @Artillery Genius",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.25",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.25",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json
new file mode 100644
index 0000000..d9fc1e5
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json	
@@ -0,0 +1,11 @@
+{
+	"from": "system",
+	"instantiation": "true",    
+    "inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.28",
+    "name": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle",
+    "outer_wall_speed": "120",
+    "print_settings_id": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json b/OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json
new file mode 100644
index 0000000..96132a7
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json	
@@ -0,0 +1,10 @@
+{
+	"from": "system",
+	"instantiation": "true",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.28",
+    "name": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle",
+    "print_settings_id": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle",
+    "version": "2.0.2.0"
+}
diff --git a/OrcaSlicer/system/Artillery/process/fdm_process_common.json b/OrcaSlicer/system/Artillery/process/fdm_process_common.json
new file mode 100644
index 0000000..7672f7a
--- /dev/null
+++ b/OrcaSlicer/system/Artillery/process/fdm_process_common.json
@@ -0,0 +1,107 @@
+{
+    "type": "process",
+    "name": "fdm_process_common",
+    "from": "system",
+    "instantiation": "false",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_thickness": "0",
+    "bridge_speed": "50",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "1000",
+    "initial_layer_acceleration": "500",
+    "top_surface_acceleration": "800",
+    "travel_acceleration": "1000",
+    "inner_wall_acceleration": "900",
+    "outer_wall_acceleration": "700",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "25%",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "30",
+    "tree_support_wall_count": "0",
+    "tree_support_with_infill": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_thickness": "0.8",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "layer_height": "0.2",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "bridge_flow": "1",
+    "initial_layer_speed": "45",
+    "initial_layer_infill_speed": "45",
+    "outer_wall_speed": "45",
+    "inner_wall_speed": "80",
+    "sparse_infill_speed": "150",
+    "internal_solid_infill_speed": "150",
+    "top_surface_speed": "50",
+    "gap_infill_speed": "30",
+    "travel_speed": "200",
+    "enable_arc_fitting": "0"
+
+}
diff --git a/OrcaSlicer/system/Creality.json b/OrcaSlicer/system/Creality.json
new file mode 100644
index 0000000..1deaf30
--- /dev/null
+++ b/OrcaSlicer/system/Creality.json
@@ -0,0 +1,1786 @@
+{
+    "name": "Creality",
+    "version":  "02.03.00.03",
+    "force_update": "0",
+    "description": "Creality configurations",
+    "machine_model_list": [
+        {
+            "name": "Creality CR-10 V2",
+            "sub_path": "machine/Creality CR-10 V2.json"
+        },
+        {
+            "name": "Creality CR-10 Max",
+            "sub_path": "machine/Creality CR-10 Max.json"
+        },
+        {
+            "name": "Creality CR-10 SE",
+            "sub_path": "machine/Creality CR-10 SE.json"
+        },
+        {
+            "name": "Creality CR-6 SE",
+            "sub_path": "machine/Creality CR-6 SE.json"
+        },
+        {
+            "name": "Creality CR-6 Max",
+            "sub_path": "machine/Creality CR-6 Max.json"
+        },
+        {
+            "name": "Creality CR-M4",
+            "sub_path": "machine/Creality CR-M4.json"
+        },
+        {
+            "name": "Creality Ender-3 V2",
+            "sub_path": "machine/Creality Ender-3 V2.json"
+        },
+        {
+            "name": "Creality Ender-3 V2 Neo",
+            "sub_path": "machine/Creality Ender-3 V2 Neo.json"
+        },
+        {
+            "name": "Creality Ender-3 S1",
+            "sub_path": "machine/Creality Ender-3 S1.json"
+        },
+        {
+            "name": "Creality Ender-3",
+            "sub_path": "machine/Creality Ender-3.json"
+        },
+        {
+            "name": "Creality Ender-3 Pro",
+            "sub_path": "machine/Creality Ender-3 Pro.json"
+        },
+        {
+            "name": "Creality Ender-3 S1 Pro",
+            "sub_path": "machine/Creality Ender-3 S1 Pro.json"
+        },
+        {
+            "name": "Creality Ender-3 S1 Plus",
+            "sub_path": "machine/Creality Ender-3 S1 Plus.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 SE",
+            "sub_path": "machine/Creality Ender-3 V3 SE.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 KE",
+            "sub_path": "machine/Creality Ender-3 V3 KE.json"
+        },
+        {
+            "name": "Creality Ender-3 V3",
+            "sub_path": "machine/Creality Ender-3 V3.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 Plus",
+            "sub_path": "machine/Creality Ender-3 V3 Plus.json"
+        },
+        {
+            "name": "Creality Ender-5",
+            "sub_path": "machine/Creality Ender-5.json"
+        },
+        {
+            "name": "Creality Ender-5 Max",
+            "sub_path": "machine/Creality Ender-5 Max.json"
+        },
+        {
+            "name": "Creality Ender-5 Plus",
+            "sub_path": "machine/Creality Ender-5 Plus.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019)",
+            "sub_path": "machine/Creality Ender-5 Pro (2019).json"
+        },
+        {
+            "name": "Creality Ender-5S",
+            "sub_path": "machine/Creality Ender-5S.json"
+        },
+        {
+            "name": "Creality Ender-5 S1",
+            "sub_path": "machine/Creality Ender-5 S1.json"
+        },
+        {
+            "name": "Creality Ender-6",
+            "sub_path": "machine/Creality Ender-6.json"
+        },
+        {
+            "name": "Creality Sermoon V1",
+            "sub_path": "machine/Creality Sermoon V1.json"
+        },
+        {
+            "name": "Creality K1",
+            "sub_path": "machine/Creality K1.json"
+        },
+        {
+            "name": "Creality K1C",
+            "sub_path": "machine/Creality K1C.json"
+        },
+        {
+            "name": "Creality K1 Max",
+            "sub_path": "machine/Creality K1 Max.json"
+        },
+        {
+            "name": "Creality K1 SE",
+            "sub_path": "machine/Creality K1 SE.json"
+        },
+        {
+            "name": "Creality K2 Plus",
+            "sub_path": "machine/Creality K2 Plus.json"
+        },
+        {
+            "name": "Creality Hi",
+            "sub_path": "machine/Creality Hi.json"
+        }
+    ],
+    "process_list": [
+        {
+            "name": "fdm_process_common",
+            "sub_path": "process/fdm_process_common.json"
+        },
+        {
+            "name": "fdm_process_creality_common",
+            "sub_path": "process/fdm_process_creality_common.json"
+        },
+        {
+            "name": "fdm_process_common_klipper",
+            "sub_path": "process/fdm_process_common_klipper.json"
+        },
+        {
+            "name": "fdm_process_creality_common_0_2",
+            "sub_path": "process/fdm_process_creality_common_0_2.json"
+        },
+        {
+            "name": "fdm_process_creality_common_0_25",
+            "sub_path": "process/fdm_process_creality_common_0_25.json"
+        },
+        {
+            "name": "fdm_process_creality_common_0_3",
+            "sub_path": "process/fdm_process_creality_common_0_3.json"
+        },
+        {
+            "name": "fdm_process_creality_common_0_5",
+            "sub_path": "process/fdm_process_creality_common_0_5.json"
+        },
+        {
+            "name": "fdm_process_creality_common_0_6",
+            "sub_path": "process/fdm_process_creality_common_0_6.json"
+        },
+        {
+            "name": "fdm_process_creality_common_0_8",
+            "sub_path": "process/fdm_process_creality_common_0_8.json"
+        },
+        {
+            "name": "fdm_process_creality_common_1_0",
+            "sub_path": "process/fdm_process_creality_common_1_0.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3 Pro 0.2",
+            "sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.2.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3 Pro 0.6",
+            "sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.6.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3 Pro 0.8",
+            "sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.8.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3 Pro 0.4",
+            "sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.4.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3 Pro 0.2",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.2.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3 Pro 0.4",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.4.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3 Pro 0.6",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.6.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3 Pro 0.8",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.8.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3 Pro 0.2",
+            "sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.2.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3 Pro 0.4",
+            "sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.4.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3 Pro 0.6",
+            "sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.6.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3 Pro 0.8",
+            "sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.8.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3 Pro 0.2",
+            "sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.2.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3 Pro 0.4",
+            "sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.4.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3 Pro 0.6",
+            "sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.6.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3 Pro 0.8",
+            "sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.8.json"
+        },
+        {
+            "name": "0.28mm Draft @Creality Ender3 Pro 0.2",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json"
+        },
+        {
+            "name": "0.28mm Draft @Creality Ender3 Pro 0.4",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json"
+        },
+        {
+            "name": "0.28mm Draft @Creality Ender3 Pro 0.6",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json"
+        },
+        {
+            "name": "0.28mm Draft @Creality Ender3 Pro 0.8",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json"
+        },
+        {
+            "name": "0.08mm SuperDetail @Creality CR-6 0.2",
+            "sub_path": "process/0.08mm SuperDetail @Creality CR-6 0.2.json"
+        },
+        {
+            "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2",
+            "sub_path": "process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json"
+        },
+        {
+            "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25",
+            "sub_path": "process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json"
+        },
+        {
+            "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3",
+            "sub_path": "process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json"
+        },
+        {
+            "name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle",
+            "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.08mm SuperDetail @Creality Hi",
+            "sub_path": "process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json"
+        },
+        {
+            "name": "0.10mm HighDetail @Creality CR-6 0.4.json",
+            "sub_path": "process/0.10mm HighDetail @Creality CR-6 0.4.json"
+        },
+        {
+            "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.2",
+            "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json"
+        },
+        {
+            "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.25",
+            "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json"
+        },
+        {
+            "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.3",
+            "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json"
+        },
+        {
+            "name": "0.10mm HighDetail @Creality CR-M4",
+            "sub_path": "process/0.10mm HighDetail @Creality CR-M4.json"
+        },
+        {
+            "name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle",
+            "sub_path": "process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality Ender3 0.2",
+            "sub_path": "process/0.12mm Fine @Creality Ender3 0.2.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality Ender3 0.4",
+            "sub_path": "process/0.12mm Fine @Creality Ender3 0.4.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality Ender3 0.6",
+            "sub_path": "process/0.12mm Fine @Creality Ender3 0.6.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality Ender3 0.8",
+            "sub_path": "process/0.12mm Fine @Creality Ender3 0.8.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality CR10Max",
+            "sub_path": "process/0.12mm Fine @Creality CR10Max.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality CR10SE 0.2",
+            "sub_path": "process/0.12mm Fine @Creality CR10SE 0.2.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality CR10SE 0.4",
+            "sub_path": "process/0.12mm Fine @Creality CR10SE 0.4.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality CR10SE 0.6",
+            "sub_path": "process/0.12mm Fine @Creality CR10SE 0.6.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality CR10SE 0.8",
+            "sub_path": "process/0.12mm Fine @Creality CR10SE 0.8.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality CR-6 0.2",
+            "sub_path": "process/0.12mm Detail @Creality CR-6 0.2.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality CR-6 0.4",
+            "sub_path": "process/0.12mm Detail @Creality CR-6 0.4.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V2",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V2.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V2Neo",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V2Neo.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V3KE",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V3KE.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V3SE 0.2",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.2.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V3SE 0.4",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.4.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V3SE 0.6",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.6.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V3SE 0.8",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.8.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V3",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender3V3Plus",
+            "sub_path": "process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.2",
+            "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.25",
+            "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.3",
+            "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Ender5Pro (2019)",
+            "sub_path": "process/0.12mm Fine @Creality Ender5Pro (2019).json"
+        },
+        {
+            "name": "0.12mm Fine @Creality K1 (0.4 nozzle)",
+            "sub_path": "process/0.12mm Fine @Creality K1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.12mm Fine @Creality K1 SE",
+            "sub_path": "process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality K1C",
+            "sub_path": "process/0.12mm Fine @Creality K1C 0.4 nozzle.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality K1Max (0.4 nozzle)",
+            "sub_path": "process/0.12mm Fine @Creality K1Max (0.4 nozzle).json"
+        },
+        {
+            "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.5",
+            "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json"
+        },
+        {
+            "name": "0.15mm Detail @Creality CR-M4",
+            "sub_path": "process/0.15mm Detail @Creality CR-M4.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle",
+            "sub_path": "process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json"
+        },
+        {
+            "name": "0.12mm Fine @Creality Hi",
+            "sub_path": "process/0.12mm Fine @Creality Hi 0.4 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality CR10V2",
+            "sub_path": "process/0.16mm Optimal @Creality CR10V2.json"
+        },
+        {
+            "name": "0.15mm Optimal @Creality CR10Max",
+            "sub_path": "process/0.15mm Optimal @Creality CR10Max.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality CR10SE 0.2",
+            "sub_path": "process/0.16mm Optimal @Creality CR10SE 0.2.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality CR10SE 0.4",
+            "sub_path": "process/0.16mm Optimal @Creality CR10SE 0.4.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality CR10SE 0.6",
+            "sub_path": "process/0.16mm Optimal @Creality CR10SE 0.6.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality CR10SE 0.8",
+            "sub_path": "process/0.16mm Optimal @Creality CR10SE 0.8.json"
+        },
+	{
+            "name": "0.16mm Optimal @Creality CR-6 0.2",
+            "sub_path": "process/0.16mm Optimal @Creality CR-6 0.2.json"
+        },
+	{
+            "name": "0.16mm Optimal @Creality CR-6 0.4",
+            "sub_path": "process/0.16mm Optimal @Creality CR-6 0.4.json"
+        },
+	{
+            "name": "0.16mm Optimal @Creality CR-6 0.6",
+            "sub_path": "process/0.16mm Optimal @Creality CR-6 0.6.json"
+        },
+        {
+            "name": "0.15mm Optimal @Creality Ender3V2",
+            "sub_path": "process/0.15mm Optimal @Creality Ender3V2.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3V2Neo",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3V2Neo.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3 0.2",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3 0.2.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3 0.4",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3 0.4.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3 0.6",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3 0.6.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3 0.8",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3 0.8.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3S1",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3S1.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3S1Pro",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3S1Pro.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3S1Plus 0.2",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3S1Plus 0.4",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3S1Plus 0.6",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3S1Plus 0.8",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3V3KE",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3V3KE.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3V3SE 0.2",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.2.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3V3SE 0.4",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.4.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3V3SE 0.6",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.6.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3V3SE 0.8",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.8.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3V3",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender3V3Plus",
+            "sub_path": "process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle",
+            "sub_path": "process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json"
+        },
+        {
+            "name": "0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle",
+            "sub_path": "process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5Plus",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5Plus.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.2",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.25",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.3",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json"
+        },
+        {
+            "name": "0.15mm Optimal @Creality Ender5Pro (2019)",
+            "sub_path": "process/0.15mm Optimal @Creality Ender5Pro (2019).json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.5",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.6",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5S",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5S.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender5S1",
+            "sub_path": "process/0.16mm Optimal @Creality Ender5S1.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Ender6",
+            "sub_path": "process/0.16mm Optimal @Creality Ender6.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality K1 (0.4 nozzle)",
+            "sub_path": "process/0.16mm Optimal @Creality K1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality K1 SE",
+            "sub_path": "process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality K1C",
+            "sub_path": "process/0.16mm Optimal @Creality K1C 0.4 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)",
+            "sub_path": "process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json"
+        },
+        {
+            "name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle",
+            "sub_path": "process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Hi",
+            "sub_path": "process/0.16mm Optimal @Creality Hi 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR10V2",
+            "sub_path": "process/0.20mm Standard @Creality CR10V2.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR10Max",
+            "sub_path": "process/0.20mm Standard @Creality CR10Max.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR10SE 0.2",
+            "sub_path": "process/0.20mm Standard @Creality CR10SE 0.2.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR10SE 0.4",
+            "sub_path": "process/0.20mm Standard @Creality CR10SE 0.4.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR10SE 0.6",
+            "sub_path": "process/0.20mm Standard @Creality CR10SE 0.6.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR10SE 0.8",
+            "sub_path": "process/0.20mm Standard @Creality CR10SE 0.8.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR-6 0.4",
+            "sub_path": "process/0.20mm Standard @Creality CR-6 0.4.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR-6 0.6",
+            "sub_path": "process/0.20mm Standard @Creality CR-6 0.6.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3",
+            "sub_path": "process/0.20mm Standard @Creality Ender3.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3 0.2",
+            "sub_path": "process/0.20mm Standard @Creality Ender3 0.2.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3 0.4",
+            "sub_path": "process/0.20mm Standard @Creality Ender3 0.4.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3 0.6",
+            "sub_path": "process/0.20mm Standard @Creality Ender3 0.6.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3 0.8",
+            "sub_path": "process/0.20mm Standard @Creality Ender3 0.8.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V2",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V2.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V2Neo",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V2Neo.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3S1",
+            "sub_path": "process/0.20mm Standard @Creality Ender3S1.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3S1Pro",
+            "sub_path": "process/0.20mm Standard @Creality Ender3S1Pro.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3S1Plus 0.2",
+            "sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.2.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3S1Plus 0.4",
+            "sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.4.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3S1Plus 0.6",
+            "sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.6.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3S1Plus 0.8",
+            "sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.8.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V3KE",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V3KE.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V3SE 0.2",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.2.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V3SE 0.4",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.4.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V3SE 0.6",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.6.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V3SE 0.8",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.8.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V3",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender3V3Plus",
+            "sub_path": "process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5",
+            "sub_path": "process/0.20mm Standard @Creality Ender5.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5Plus",
+            "sub_path": "process/0.20mm Standard @Creality Ender5Plus.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.25",
+            "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.3",
+            "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5Pro (2019)",
+            "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019).json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.5",
+            "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.6",
+            "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.8",
+            "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5S",
+            "sub_path": "process/0.20mm Standard @Creality Ender5S.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender5S1",
+            "sub_path": "process/0.20mm Standard @Creality Ender5S1.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Ender6",
+            "sub_path": "process/0.20mm Standard @Creality Ender6.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality CR-M4",
+            "sub_path": "process/0.20mm Standard @Creality CR-M4.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality K1 (0.4 nozzle)",
+            "sub_path": "process/0.20mm Standard @Creality K1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20mm Standard @Creality K1C",
+            "sub_path": "process/0.20mm Standard @Creality K1C 0.4 nozzle.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
+            "sub_path": "process/0.20mm Standard @Creality K1Max (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality K1 SE 0.4",
+            "sub_path": "process/0.20mm Standard @Creality K1 SE 0.4.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Hi",
+            "sub_path": "process/0.20mm Standard @Creality Hi 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3 0.2",
+            "sub_path": "process/0.24mm Draft @Creality Ender3 0.2.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3 0.4",
+            "sub_path": "process/0.24mm Draft @Creality Ender3 0.4.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3 0.6",
+            "sub_path": "process/0.24mm Draft @Creality Ender3 0.6.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3 0.8",
+            "sub_path": "process/0.24mm Draft @Creality Ender3 0.8.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality CR10Max",
+            "sub_path": "process/0.24mm Draft @Creality CR10Max.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality CR10SE 0.2",
+            "sub_path": "process/0.24mm Draft @Creality CR10SE 0.2.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality CR10SE 0.4",
+            "sub_path": "process/0.24mm Draft @Creality CR10SE 0.4.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality CR10SE 0.6",
+            "sub_path": "process/0.24mm Draft @Creality CR10SE 0.6.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality CR10SE 0.8",
+            "sub_path": "process/0.24mm Draft @Creality CR10SE 0.8.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality CR-6 0.4",
+            "sub_path": "process/0.24mm Draft @Creality CR-6 0.4.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality CR-6 0.6",
+            "sub_path": "process/0.24mm Draft @Creality CR-6 0.6.json"
+        },
+        {
+            "name": "0.24mm Optimal @Creality CR-6 0.8",
+            "sub_path": "process/0.24mm Optimal @Creality CR-6 0.8.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V2",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V2.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V2Neo",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V2Neo.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V3KE",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V3KE.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V3SE 0.2",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.2.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V3SE 0.4",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.4.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V3SE 0.6",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.6.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V3SE 0.8",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.8.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V3",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V3",
+            "sub_path": "process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3V3Plus",
+            "sub_path": "process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Optimal @Creality Ender3V3Plus",
+            "sub_path": "process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3S1Plus 0.2",
+            "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.2.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3S1Plus 0.4",
+            "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.4.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3S1Plus 0.6",
+            "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.6.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender3S1Plus 0.8",
+            "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.8.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.3",
+            "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender5Pro (2019)",
+            "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019).json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.5",
+            "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.6",
+            "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.8",
+            "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality Hi",
+            "sub_path": "process/0.24mm Draft @Creality Hi 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Optimal @Creality Hi",
+            "sub_path": "process/0.24mm Optimal @Creality Hi 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality Ender3 0.2",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.2.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality Ender3 0.4",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.4.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality Ender3 0.6",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.6.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality Ender3 0.8",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.8.json"
+        },
+        {
+            "name": "0.30mm Standard @Creality Ender3V3",
+            "sub_path": "process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Draft @Creality Ender3V3",
+            "sub_path": "process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @Creality Ender3V3Plus",
+            "sub_path": "process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Draft @Creality Ender3V3Plus",
+            "sub_path": "process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality CR-6 0.4",
+            "sub_path": "process/0.28mm SuperDraft @Creality CR-6 0.4.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality CR-6 0.6",
+            "sub_path": "process/0.28mm SuperDraft @Creality CR-6 0.6.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0",
+            "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json"
+        },
+        {
+            "name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json"
+        },
+        {
+            "name": "0.32mm Chunky @Creality CR-6 0.6",
+            "sub_path": "process/0.32mm Chunky @Creality CR-6 0.6.json"
+        },
+        {
+            "name": "0.32mm Standard @Creality CR-6 0.8",
+            "sub_path": "process/0.32mm Standard @Creality CR-6 0.8.json"
+        },
+        {
+            "name": "0.36mm SuperChunky @Creality CR-6 0.6",
+            "sub_path": "process/0.36mm SuperChunky @Creality CR-6 0.6.json"
+        },
+        {
+            "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.5",
+            "sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json"
+        },
+        {
+            "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.6",
+            "sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json"
+        },
+        {
+            "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.8",
+            "sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json"
+        },
+        {
+            "name": "0.36mm Chunky @Creality Ender5Pro (2019) 1.0",
+            "sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json"
+        },
+        {
+            "name": "0.40mm Draft @Creality CR-6 0.8",
+            "sub_path": "process/0.40mm Draft @Creality CR-6 0.8.json"
+        },
+        {
+            "name": "0.44mm SuperExtraChunky @Creality CR-6 0.6",
+            "sub_path": "process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json"
+        },
+        {
+            "name": "0.48mm Chunky @Creality CR-6 0.8",
+            "sub_path": "process/0.48mm Chunky @Creality CR-6 0.8.json"
+        },
+        {
+            "name": "0.48mm Draft @Creality CR-6 0.8",
+            "sub_path": "process/0.48mm Draft @Creality CR-6 0.8.json"
+        },
+        {
+            "name": "0.56mm SuperChunky @Creality CR-6 0.8",
+            "sub_path": "process/0.56mm SuperChunky @Creality CR-6 0.8.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality Sermoon V1",
+            "sub_path": "process/0.16mm Optimal @Creality Sermoon V1.json"
+        },
+        {
+            "name": "0.20mm Standard @Creality Sermoon V1",
+            "sub_path": "process/0.20mm Standard @Creality Sermoon V1.json"
+        },
+        {
+            "name": "0.28mm Standard @Creality Sermoon V1",
+            "sub_path": "process/0.28mm Standard @Creality Sermoon V1.json"
+        },
+        {
+            "name": "0.24mm Optimal @Creality K1 (0.6 nozzle)",
+            "sub_path": "process/0.24mm Optimal @Creality K1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.24mm Optimal @Creality K1C",
+            "sub_path": "process/0.24mm Optimal @Creality K1C 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Optimal @Creality K1Max (0.6 nozzle)",
+            "sub_path": "process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json"
+        },
+        {
+            "name": "0.24mm Draft @Creality K1 (0.4 nozzle)",
+            "sub_path": "process/0.24mm Draft @Creality K1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.24mm Draft @Creality K1 SE",
+            "sub_path": "process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality K1C",
+            "sub_path": "process/0.24mm Draft @Creality K1C 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Draft @Creality K1Max (0.4 nozzle)",
+            "sub_path": "process/0.24mm Draft @Creality K1Max (0.4 nozzle).json"
+        },
+        {
+            "name": "0.30mm Standard @Creality K1 (0.6 nozzle)",
+            "sub_path": "process/0.30mm Standard @Creality K1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.30mm Standard @Creality K1C",
+            "sub_path": "process/0.30mm Standard @Creality K1C 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @Creality Hi",
+            "sub_path": "process/0.30mm Standard @Creality Hi 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
+            "sub_path": "process/0.30mm Standard @Creality K1Max (0.6 nozzle).json"
+        },
+        {
+            "name": "0.32mm Optimal @Creality K1 (0.8 nozzle)",
+            "sub_path": "process/0.32mm Optimal @Creality K1 (0.8 nozzle).json"
+        },
+        {
+            "name": "0.32mm Optimal @Creality K1C",
+            "sub_path": "process/0.32mm Optimal @Creality K1C 0.8 nozzle.json"
+        },
+        {
+            "name": "0.32mm Optimal @Creality K1Max (0.8 nozzle)",
+            "sub_path": "process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json"
+        },
+        {
+            "name": "0.36mm Draft @Creality K1 (0.6 nozzle)",
+            "sub_path": "process/0.36mm Draft @Creality K1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.36mm Draft @Creality K1C",
+            "sub_path": "process/0.36mm Draft @Creality K1C 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Draft @Creality Hi",
+            "sub_path": "process/0.36mm Draft @Creality Hi 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Draft @Creality K1Max (0.6 nozzle)",
+            "sub_path": "process/0.36mm Draft @Creality K1Max (0.6 nozzle).json"
+        },
+        {
+            "name": "0.40mm Standard @Creality K1 (0.8 nozzle)",
+            "sub_path": "process/0.40mm Standard @Creality K1 (0.8 nozzle).json"
+        },
+        {
+            "name": "0.40mm Standard @Creality K1C",
+            "sub_path": "process/0.40mm Standard @Creality K1C 0.8 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
+            "sub_path": "process/0.40mm Standard @Creality K1Max (0.8 nozzle).json"
+        },
+        {
+            "name": "0.48mm Draft @Creality K1 (0.8 nozzle)",
+            "sub_path": "process/0.48mm Draft @Creality K1 (0.8 nozzle).json"
+        },
+        {
+            "name": "0.48mm Draft @Creality K1C",
+            "sub_path": "process/0.48mm Draft @Creality K1C 0.8 nozzle.json"
+        },
+        {
+            "name": "0.48mm Draft @Creality K1Max (0.8 nozzle)",
+            "sub_path": "process/0.48mm Draft @Creality K1Max (0.8 nozzle).json"
+        }
+    ],
+    "filament_list": [
+        {
+            "name": "fdm_filament_common",
+            "sub_path": "filament/fdm_filament_common.json"
+        },
+        {
+            "name": "fdm_filament_abs",
+            "sub_path": "filament/fdm_filament_abs.json"
+        },
+        {
+            "name": "fdm_filament_asa",
+            "sub_path": "filament/fdm_filament_asa.json"
+        },
+        {
+            "name": "fdm_filament_pa",
+            "sub_path": "filament/fdm_filament_pa.json"
+        },
+        {
+            "name": "fdm_filament_pc",
+            "sub_path": "filament/fdm_filament_pc.json"
+        },
+        {
+            "name": "fdm_filament_pet",
+            "sub_path": "filament/fdm_filament_pet.json"
+        },
+        {
+            "name": "fdm_filament_pla",
+            "sub_path": "filament/fdm_filament_pla.json"
+        },
+        {
+            "name": "fdm_filament_tpu",
+            "sub_path": "filament/fdm_filament_tpu.json"
+        },
+        {
+            "name": "Creality Generic ABS",
+            "sub_path": "filament/Creality Generic ABS.json"
+        },
+        {
+            "name": "Creality Generic ASA",
+            "sub_path": "filament/Creality Generic ASA.json"
+        },
+        {
+            "name": "Creality Generic PA-CF",
+            "sub_path": "filament/Creality Generic PA-CF.json"
+        },
+        {
+            "name": "Creality Generic PC",
+            "sub_path": "filament/Creality Generic PC.json"
+        },
+        {
+            "name": "Creality Generic PETG",
+            "sub_path": "filament/Creality Generic PETG.json"
+        },
+        {
+            "name": "Creality Generic PLA",
+            "sub_path": "filament/Creality Generic PLA.json"
+        },
+        {
+            "name": "Creality HF Generic PLA",
+            "sub_path": "filament/Creality HF Generic PLA.json"
+        },
+        {
+            "name": "Creality HF Generic Speed PLA",
+            "sub_path": "filament/Creality HF Generic Speed PLA.json"
+        },
+        {
+            "name": "Creality Generic PLA-CF",
+            "sub_path": "filament/Creality Generic PLA-CF.json"
+        },
+        {
+            "name": "Creality Generic TPU",
+            "sub_path": "filament/Creality Generic TPU.json"
+        },
+        {
+            "name": "Creality Generic ABS @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic ABS @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic ASA @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic ASA @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic PA-CF @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic PA-CF @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic PETG @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic PETG @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic PLA @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic PLA @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic PLA High Speed @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic PLA High Speed @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Matte @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic PLA Matte @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Silk @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic PLA Silk @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic TPU @Ender-3V3-all",
+            "sub_path": "filament/Creality Generic TPU @Ender-3V3-all.json"
+        },
+        {
+            "name": "Creality Generic ABS @K1-all",
+            "sub_path": "filament/Creality Generic ABS @K1-all.json"
+        },
+        {
+            "name": "Creality Generic ASA @K1-all",
+            "sub_path": "filament/Creality Generic ASA @K1-all.json"
+        },
+        {
+            "name": "Creality Generic PA-CF @K1-all",
+            "sub_path": "filament/Creality Generic PA-CF @K1-all.json"
+        },
+        {
+            "name": "Creality Generic PC @K1-all",
+            "sub_path": "filament/Creality Generic PC @K1-all.json"
+        },
+        {
+            "name": "Creality Generic PETG @K1-all",
+            "sub_path": "filament/Creality Generic PETG @K1-all.json"
+        },
+        {
+            "name": "Creality Generic PLA @K1-all",
+            "sub_path": "filament/Creality Generic PLA @K1-all.json"
+        },
+        {
+            "name": "Creality Generic PLA High Speed @K1-all",
+            "sub_path": "filament/Creality Generic PLA High Speed @K1-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Matte @K1-all",
+            "sub_path": "filament/Creality Generic PLA Matte @K1-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Silk @K1-all",
+            "sub_path": "filament/Creality Generic PLA Silk @K1-all.json"
+        },
+        {
+            "name": "Creality Generic PLA-CF @K1-all",
+            "sub_path": "filament/Creality Generic PLA-CF @K1-all.json"
+        },
+        {
+            "name": "Creality Generic TPU @K1-all",
+            "sub_path": "filament/Creality Generic TPU @K1-all.json"
+        },
+        {
+            "name": "Creality Generic ABS @K2-all",
+            "sub_path": "filament/Creality Generic ABS @K2-all.json"
+        },
+        {
+            "name": "Creality Generic ASA @K2-all",
+            "sub_path": "filament/Creality Generic ASA @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PETG @K2-all",
+            "sub_path": "filament/Creality Generic PETG @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA @K2-all",
+            "sub_path": "filament/Creality Generic PLA @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA High Speed @K2-all",
+            "sub_path": "filament/Creality Generic PLA High Speed @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Matte @K2-all",
+            "sub_path": "filament/Creality Generic PLA Matte @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Silk @K2-all",
+            "sub_path": "filament/Creality Generic PLA Silk @K2-all.json"
+        },
+        {
+            "name": "Creality Generic TPU @K2-all",
+            "sub_path": "filament/Creality Generic TPU @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA-CF @K2-all",
+            "sub_path": "filament/Creality Generic PLA-CF @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PA-CF @K2-all",
+            "sub_path": "filament/Creality Generic PA-CF @K2-all.json"
+        },
+        {
+            "name": "Creality Generic ABS @Hi-all",
+            "sub_path": "filament/Creality Generic ABS @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic ASA @Hi-all",
+            "sub_path": "filament/Creality Generic ASA @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic ABS @Ender-5Max-all",
+            "sub_path": "filament/Creality Generic ABS @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Generic ASA @Ender-5Max-all",
+            "sub_path": "filament/Creality Generic ASA @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Generic PA @Ender-5Max-all",
+            "sub_path": "filament/Creality Generic PA @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Generic PETG @Ender-5Max-all",
+            "sub_path": "filament/Creality Generic PETG @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Generic PLA @Ender-5Max-all",
+            "sub_path": "filament/Creality Generic PLA @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Generic TPU @Ender-5Max-all",
+            "sub_path": "filament/Creality Generic TPU @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Hyper ABS @Ender-5Max-all",
+            "sub_path": "filament/Creality Hyper ABS @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Hyper PLA @Ender-5Max-all",
+            "sub_path": "filament/Creality Hyper PLA @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Hyper PLA-CF @Ender-5Max-all",
+            "sub_path": "filament/Creality Hyper PLA-CF @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Silk PLA @Ender-5Max-all",
+            "sub_path": "filament/Creality Silk PLA @Ender-5Max-all.json"
+        },
+        {
+            "name": "Creality Generic ASA-CF @Hi-all",
+            "sub_path": "filament/Creality Generic ASA-CF @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic PETG @Hi-all",
+            "sub_path": "filament/Creality Generic PETG @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic PETG-CF @Hi-all",
+            "sub_path": "filament/Creality Generic PETG-CF @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic PLA @Hi-all",
+            "sub_path": "filament/Creality Generic PLA @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic PLA High Speed @Hi-all",
+            "sub_path": "filament/Creality Generic PLA High Speed @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Matte @Hi-all",
+            "sub_path": "filament/Creality Generic PLA Matte @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Silk @Hi-all",
+            "sub_path": "filament/Creality Generic PLA Silk @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic PLA-CF @Hi-all",
+            "sub_path": "filament/Creality Generic PLA-CF @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Wood @Hi-all",
+            "sub_path": "filament/Creality Generic PLA Wood @Hi-all.json"
+        },
+        {
+            "name": "Creality Generic TPU @Hi-all",
+            "sub_path": "filament/Creality Generic TPU @Hi-all.json"
+        }
+    ],
+    "machine_list": [
+        {
+            "name": "fdm_machine_common",
+            "sub_path": "machine/fdm_machine_common.json"
+        },
+        {
+            "name": "fdm_creality_common",
+            "sub_path": "machine/fdm_creality_common.json"
+        },
+        {
+            "name": "Creality CR-10 V2 0.4 nozzle",
+            "sub_path": "machine/Creality CR-10 V2 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality CR-10 Max 0.4 nozzle",
+            "sub_path": "machine/Creality CR-10 Max 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality CR-10 SE 0.2 nozzle",
+            "sub_path": "machine/Creality CR-10 SE 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality CR-10 SE 0.4 nozzle",
+            "sub_path": "machine/Creality CR-10 SE 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality CR-10 SE 0.6 nozzle",
+            "sub_path": "machine/Creality CR-10 SE 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality CR-10 SE 0.8 nozzle",
+            "sub_path": "machine/Creality CR-10 SE 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-6 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-6 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality CR-6 SE 0.2 nozzle",
+            "sub_path": "machine/Creality CR-6 SE 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality CR-6 SE 0.4 nozzle",
+            "sub_path": "machine/Creality CR-6 SE 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality CR-6 SE 0.6 nozzle",
+            "sub_path": "machine/Creality CR-6 SE 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality CR-6 SE 0.8 nozzle",
+            "sub_path": "machine/Creality CR-6 SE 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality CR-6 Max 0.2 nozzle",
+            "sub_path": "machine/Creality CR-6 Max 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality CR-6 Max 0.4 nozzle",
+            "sub_path": "machine/Creality CR-6 Max 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality CR-6 Max 0.6 nozzle",
+            "sub_path": "machine/Creality CR-6 Max 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality CR-6 Max 0.8 nozzle",
+            "sub_path": "machine/Creality CR-6 Max 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality CR-M4 0.4 nozzle",
+            "sub_path": "machine/Creality CR-M4 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V2 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 V2 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 0.2 nozzle",
+            "sub_path": "machine/Creality Ender-3 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V2 Neo 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 V2 Neo 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 0.6 nozzle",
+            "sub_path": "machine/Creality Ender-3 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 0.8 nozzle",
+            "sub_path": "machine/Creality Ender-3 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 Pro 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 Pro 0.2 nozzle",
+            "sub_path": "machine/Creality Ender-3 Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 Pro 0.6 nozzle",
+            "sub_path": "machine/Creality Ender-3 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 Pro 0.8 nozzle",
+            "sub_path": "machine/Creality Ender-3 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 S1 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 S1 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 S1 Pro 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 S1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 S1 Plus 0.2 nozzle",
+            "sub_path": "machine/Creality Ender-3 S1 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 S1 Plus 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 S1 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 S1 Plus 0.6 nozzle",
+            "sub_path": "machine/Creality Ender-3 S1 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 S1 Plus 0.8 nozzle",
+            "sub_path": "machine/Creality Ender-3 S1 Plus 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 SE 0.2 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 SE 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 SE 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 SE 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 SE 0.6 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 SE 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 SE 0.8 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 SE 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 KE 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 KE 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 0.6 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 Plus 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-3 V3 Plus 0.6 nozzle",
+            "sub_path": "machine/Creality Ender-3 V3 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-5 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Max 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-5 Max 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Plus 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-5 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019) 0.2 nozzle",
+            "sub_path": "machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019) 0.25 nozzle",
+            "sub_path": "machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019) 0.3 nozzle",
+            "sub_path": "machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019) 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019) 0.5 nozzle",
+            "sub_path": "machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019) 0.6 nozzle",
+            "sub_path": "machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019) 0.8 nozzle",
+            "sub_path": "machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 Pro (2019) 1.0 nozzle",
+            "sub_path": "machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5S 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-5S 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Ender-5 S1 0.4 nozzle",
+            "sub_path": "machine/Creality Ender-5 S1 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Sermoon V1 0.4 nozzle",
+            "sub_path": "machine/Creality Sermoon V1 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality K1 (0.4 nozzle)",
+            "sub_path": "machine/Creality K1 (0.4 nozzle).json"
+        },
+        {
+            "name": "Creality K1 (0.6 nozzle)",
+            "sub_path": "machine/Creality K1 (0.6 nozzle).json"
+        },
+        {
+            "name": "Creality K1 (0.8 nozzle)",
+            "sub_path": "machine/Creality K1 (0.8 nozzle).json"
+        },
+        {
+            "name": "Creality K1C 0.4 nozzle",
+            "sub_path": "machine/Creality K1C 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality K1C 0.6 nozzle",
+            "sub_path": "machine/Creality K1C 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality K1C 0.8 nozzle",
+            "sub_path": "machine/Creality K1C 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality K1 SE 0.4 nozzle",
+            "sub_path": "machine/Creality K1 SE 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality K1 Max (0.4 nozzle)",
+            "sub_path": "machine/Creality K1 Max (0.4 nozzle).json"
+        },
+        {
+            "name": "Creality K1 Max (0.6 nozzle)",
+            "sub_path": "machine/Creality K1 Max (0.6 nozzle).json"
+        },
+        {
+            "name": "Creality K1 Max (0.8 nozzle)",
+            "sub_path": "machine/Creality K1 Max (0.8 nozzle).json"
+        },
+        {
+            "name": "Creality K2 Plus 0.2 nozzle",
+            "sub_path": "machine/Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality K2 Plus 0.4 nozzle",
+            "sub_path": "machine/Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality K2 Plus 0.6 nozzle",
+            "sub_path": "machine/Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality K2 Plus 0.8 nozzle",
+            "sub_path": "machine/Creality K2 Plus 0.8 nozzle.json"
+        },
+        {
+            "name": "Creality Hi 0.4 nozzle",
+            "sub_path": "machine/Creality Hi 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality Hi 0.6 nozzle",
+            "sub_path": "machine/Creality Hi 0.6 nozzle.json"
+        }
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-3V3-all.json
new file mode 100644
index 0000000..e28e148
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-3V3-all.json	
@@ -0,0 +1,21 @@
+{
+	"type": "filament",
+	"setting_id": "GFSA04_CREALITY_00",
+	"name": "Creality Generic ABS @Ender-3V3-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic ABS",
+	"filament_max_volumetric_speed": ["9"],
+	"slow_down_layer_time": ["5"],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-5Max-all.json
new file mode 100644
index 0000000..f7f1c80
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "07001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic ABS @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "3",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "90",
+    "cool_plate_temp_initial_layer": "90",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "105",
+    "eng_plate_temp_initial_layer": "105",
+    "fan_cooling_layer_time": "30",
+    "fan_max_speed": "20",
+    "fan_min_speed": "20",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "15",
+    "filament_density": "1.08",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.85",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "35",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "0",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "90",
+    "hot_plate_temp_initial_layer": "90",
+    "nozzle_temperature": "260",
+    "nozzle_temperature_initial_layer": "260",
+    "nozzle_temperature_range_high": "260",
+    "nozzle_temperature_range_low": "230",
+    "overhang_fan_speed": "20",
+    "overhang_fan_threshold": "25%",
+    "pressure_advance": "0.03",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "5",
+    "slow_down_min_speed": "10",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "110",
+    "textured_plate_temp": "90",
+    "textured_plate_temp_initial_layer": "90"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Hi-all.json
new file mode 100644
index 0000000..8868260
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Hi-all.json	
@@ -0,0 +1,15 @@
+{
+	"type": "filament",
+	"setting_id": "GFSA04_CREALITY_00",
+	"name": "Creality Generic ABS @Hi-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic ABS",
+	"filament_max_volumetric_speed": ["9"],
+	"slow_down_layer_time": ["5"],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"],
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K1-all.json
new file mode 100644
index 0000000..f5bc4e3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K1-all.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic ABS @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic ABS",
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K2-all.json
new file mode 100644
index 0000000..83007ba
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K2-all.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic ABS @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic ABS",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ABS.json b/OrcaSlicer/system/Creality/filament/Creality Generic ABS.json
new file mode 100644
index 0000000..518de65
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ABS.json	
@@ -0,0 +1,64 @@
+{
+	"type": "filament",
+	"filament_id": "GFB99",
+	"setting_id": "GFSA04",
+	"name": "Creality Generic ABS",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": ["0.926"],
+	"filament_max_volumetric_speed": ["12"],
+	"compatible_printers": [
+		"Creality CR-10 V2 0.4 nozzle",
+		"Creality CR-10 Max 0.4 nozzle",
+		"Creality CR-6 SE 0.2 nozzle",
+		"Creality CR-6 SE 0.4 nozzle",
+		"Creality CR-6 SE 0.6 nozzle",
+		"Creality CR-6 SE 0.8 nozzle",
+		"Creality CR-6 Max 0.2 nozzle",
+		"Creality CR-6 Max 0.4 nozzle",
+		"Creality CR-6 Max 0.6 nozzle",
+		"Creality CR-6 Max 0.8 nozzle",
+		"Creality Sermoon V1 0.4 nozzle",
+		"Creality Ender-3 0.2 nozzle",
+		"Creality Ender-3 0.4 nozzle",
+		"Creality Ender-3 0.6 nozzle",
+		"Creality Ender-3 0.8 nozzle",
+		"Creality Ender-3 Pro 0.2 nozzle",
+		"Creality Ender-3 Pro 0.4 nozzle",
+		"Creality Ender-3 Pro 0.6 nozzle",
+		"Creality Ender-3 Pro 0.8 nozzle",
+		"Creality Ender-3 V2 0.4 nozzle",
+		"Creality Ender-3 V2 Neo 0.4 nozzle",
+		"Creality Ender-3 S1 0.4 nozzle",
+		"Creality Ender-3 S1 Pro 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.2 nozzle",
+		"Creality Ender-3 S1 Plus 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.6 nozzle",
+		"Creality Ender-3 S1 Plus 0.8 nozzle",
+		"Creality Ender-5 0.4 nozzle",
+		"Creality Ender-5 Plus 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.2 nozzle",
+		"Creality Ender-5 Pro (2019) 0.25 nozzle",
+		"Creality Ender-5 Pro (2019) 0.3 nozzle",
+		"Creality Ender-5 Pro (2019) 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.5 nozzle",
+		"Creality Ender-5 Pro (2019) 0.6 nozzle",
+		"Creality Ender-5 Pro (2019) 0.8 nozzle",
+		"Creality Ender-5 Pro (2019) 1.0 nozzle",
+		"Creality Ender-5S 0.4 nozzle",
+		"Creality Ender-5 S1 0.4 nozzle",
+		"Creality Ender-6 0.4 nozzle",
+		"Creality K1 (0.4 nozzle)",
+		"Creality K1 (0.6 nozzle)",
+		"Creality K1 (0.8 nozzle)",
+		"Creality K1 Max (0.4 nozzle)",
+		"Creality K1 Max (0.6 nozzle)",
+		"Creality K1 Max (0.8 nozzle)",
+		"Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle",
+		"Creality CR-M4 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-3V3-all.json
new file mode 100644
index 0000000..bf2d0f3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-3V3-all.json	
@@ -0,0 +1,21 @@
+{
+	"type": "filament",
+    "setting_id": "GFSA04_00",
+	"name": "Creality Generic ASA @Ender-3V3-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic ASA",
+	"filament_max_volumetric_speed": ["9"],
+	"slow_down_layer_time": ["5"],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-5Max-all.json
new file mode 100644
index 0000000..ae35ac9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "19001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic ASA @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "55",
+    "close_fan_the_first_x_layers": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "90",
+    "cool_plate_temp_initial_layer": "90",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "50",
+    "eng_plate_temp_initial_layer": "50",
+    "fan_cooling_layer_time": "30",
+    "fan_max_speed": "20",
+    "fan_min_speed": "20",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "29",
+    "filament_density": "1.15",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.85",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "35",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "nil",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "ASA"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "90",
+    "hot_plate_temp_initial_layer": "90",
+    "nozzle_temperature": "260",
+    "nozzle_temperature_initial_layer": "260",
+    "nozzle_temperature_range_high": "280",
+    "nozzle_temperature_range_low": "240",
+    "overhang_fan_speed": "20",
+    "overhang_fan_threshold": "50%",
+    "pressure_advance": "0.032",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "5",
+    "slow_down_min_speed": "10",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "110",
+    "textured_plate_temp": "90",
+    "textured_plate_temp_initial_layer": "90"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Hi-all.json
new file mode 100644
index 0000000..d73dc9a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Hi-all.json	
@@ -0,0 +1,15 @@
+{
+	"type": "filament",
+    "setting_id": "GFSA04_00",
+	"name": "Creality Generic ASA @Hi-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic ASA",
+	"filament_max_volumetric_speed": ["9"],
+	"slow_down_layer_time": ["5"],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"],
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K1-all.json
new file mode 100644
index 0000000..6f24db9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K1-all.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "setting_id": "GFSA04_00",
+    "name": "Creality Generic ASA @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic ASA",
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K2-all.json
new file mode 100644
index 0000000..007ea26
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K2-all.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "setting_id": "GFSA04_00",
+    "name": "Creality Generic ASA @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic ASA",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ASA-CF @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic ASA-CF @Hi-all.json
new file mode 100644
index 0000000..e757f82
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ASA-CF @Hi-all.json	
@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+    "setting_id": "GFSA04_00",
+	"name": "Creality Generic ASA-CF @Hi-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic ASA @Hi-all",
+	"filament_max_volumetric_speed": ["9"],
+	"slow_down_layer_time": ["5"],
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic ASA.json b/OrcaSlicer/system/Creality/filament/Creality Generic ASA.json
new file mode 100644
index 0000000..8b7204b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic ASA.json	
@@ -0,0 +1,54 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFSA04",
+    "name": "Creality Generic ASA",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_asa",
+    "filament_flow_ratio": ["0.926"],
+    "filament_max_volumetric_speed": ["12"],
+    "compatible_printers": [
+        "Creality CR-10 V2 0.4 nozzle",
+        "Creality CR-10 Max 0.4 nozzle",
+        "Creality CR-6 SE 0.2 nozzle",
+        "Creality CR-6 SE 0.4 nozzle",
+        "Creality CR-6 SE 0.6 nozzle",
+        "Creality CR-6 SE 0.8 nozzle",
+        "Creality CR-6 Max 0.2 nozzle",
+        "Creality CR-6 Max 0.4 nozzle",
+        "Creality CR-6 Max 0.6 nozzle",
+        "Creality CR-6 Max 0.8 nozzle",
+        "Creality Ender-3 V2 0.4 nozzle",
+        "Creality Ender-3 0.2 nozzle",
+		"Creality Ender-3 0.4 nozzle",
+		"Creality Ender-3 0.6 nozzle",
+		"Creality Ender-3 0.8 nozzle",
+        "Creality Ender-3 Pro 0.2 nozzle",
+		"Creality Ender-3 Pro 0.4 nozzle",
+		"Creality Ender-3 Pro 0.6 nozzle",
+		"Creality Ender-3 Pro 0.8 nozzle",
+		"Creality Ender-3 V2 Neo 0.4 nozzle",
+        "Creality Ender-3 S1 0.4 nozzle",
+        "Creality Ender-3 S1 Pro 0.4 nozzle",
+        "Creality Ender-5 0.4 nozzle",
+        "Creality Ender-5 Plus 0.4 nozzle",
+        "Creality Ender-5 Pro (2019) 0.2 nozzle",
+        "Creality Ender-5 Pro (2019) 0.25 nozzle",
+        "Creality Ender-5 Pro (2019) 0.3 nozzle",
+        "Creality Ender-5 Pro (2019) 0.4 nozzle",
+        "Creality Ender-5 Pro (2019) 0.5 nozzle",
+        "Creality Ender-5 Pro (2019) 0.6 nozzle",
+        "Creality Ender-5 Pro (2019) 0.8 nozzle",
+        "Creality Ender-5 Pro (2019) 1.0 nozzle",
+        "Creality Ender-5S 0.4 nozzle",
+        "Creality Ender-5 S1 0.4 nozzle",
+        "Creality Ender-6 0.4 nozzle",
+        "Creality K1 (0.4 nozzle)",
+        "Creality K1 (0.6 nozzle)",
+        "Creality K1 (0.8 nozzle)",
+        "Creality K1 Max (0.4 nozzle)",
+        "Creality K1 Max (0.6 nozzle)",
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PA @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PA @Ender-5Max-all.json
new file mode 100644
index 0000000..a6db02e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PA @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "11001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic PA @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "100",
+    "cool_plate_temp": "45",
+    "cool_plate_temp_initial_layer": "45",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "0",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "100",
+    "eng_plate_temp_initial_layer": "100",
+    "fan_cooling_layer_time": "100",
+    "fan_max_speed": "100",
+    "fan_min_speed": "100",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "50",
+    "filament_density": "1.24",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.9",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "2",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "0",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "1.5",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "PA"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "0.2",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "45",
+    "hot_plate_temp_initial_layer": "45",
+    "nozzle_temperature": "250",
+    "nozzle_temperature_initial_layer": "250",
+    "nozzle_temperature_range_high": "280",
+    "nozzle_temperature_range_low": "250",
+    "overhang_fan_speed": "50",
+    "overhang_fan_threshold": "50%",
+    "pressure_advance": "0.042",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "40",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "8",
+    "slow_down_min_speed": "5",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "108",
+    "textured_plate_temp": "45",
+    "textured_plate_temp_initial_layer": "45"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json
new file mode 100644
index 0000000..1c86dd1
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Creality Generic PA-CF @Ender-3V3-all",
+    "inherits": "Creality Generic PA-CF",
+    "from": "system",
+    "setting_id": "GFSN99_01",
+    "instantiation": "true",
+    "compatible_printers": [
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K1-all.json
new file mode 100644
index 0000000..cdf6f7a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K1-all.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "name": "Creality Generic PA-CF @K1-all",
+    "inherits": "Creality Generic PA-CF",
+    "from": "system",
+    "setting_id": "GFSN99_01",
+    "instantiation": "true",
+    "compatible_printers": [
+		"Creality K1 (0.4 nozzle)",
+		"Creality K1 (0.6 nozzle)",
+		"Creality K1 (0.8 nozzle)",
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
+        "Creality K1 Max (0.4 nozzle)",
+        "Creality K1 Max (0.6 nozzle)",
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K2-all.json
new file mode 100644
index 0000000..639109c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K2-all.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "name": "Creality Generic PA-CF @K2-all",
+    "inherits": "Creality Generic PA-CF",
+    "from": "system",
+    "setting_id": "GFSN99_01",
+    "instantiation": "true",
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF.json b/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF.json
new file mode 100644
index 0000000..3b84e25
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF.json	
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "Creality Generic PA-CF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pa",
+    "filament_type": [
+        "PA-CF"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.01"
+    ],
+	"compatible_printers": [
+		"Creality CR-10 V2 0.4 nozzle",
+		"Creality CR-10 Max 0.4 nozzle",
+		"Creality CR-6 SE 0.2 nozzle",
+		"Creality CR-6 SE 0.4 nozzle",
+		"Creality CR-6 SE 0.6 nozzle",
+		"Creality CR-6 SE 0.8 nozzle",
+		"Creality CR-6 Max 0.2 nozzle",
+		"Creality CR-6 Max 0.4 nozzle",
+		"Creality CR-6 Max 0.6 nozzle",
+		"Creality CR-6 Max 0.8 nozzle",
+		"Creality Ender-3 0.2 nozzle",
+		"Creality Ender-3 0.4 nozzle",
+		"Creality Ender-3 0.6 nozzle",
+		"Creality Ender-3 0.8 nozzle",
+		"Creality Ender-3 Pro 0.2 nozzle",
+		"Creality Ender-3 Pro 0.4 nozzle",
+		"Creality Ender-3 Pro 0.6 nozzle",
+		"Creality Ender-3 Pro 0.8 nozzle",
+		"Creality Ender-3 V2 0.4 nozzle",
+		"Creality Ender-3 V2 Neo 0.4 nozzle",
+		"Creality Ender-3 S1 0.4 nozzle",
+		"Creality Ender-3 S1 Pro 0.4 nozzle",
+		"Creality Ender-5 0.4 nozzle",
+		"Creality Ender-5 Plus 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.2 nozzle",
+		"Creality Ender-5 Pro (2019) 0.25 nozzle",
+		"Creality Ender-5 Pro (2019) 0.3 nozzle",
+		"Creality Ender-5 Pro (2019) 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.5 nozzle",
+		"Creality Ender-5 Pro (2019) 0.6 nozzle",
+		"Creality Ender-5 Pro (2019) 0.8 nozzle",
+		"Creality Ender-5 Pro (2019) 1.0 nozzle",
+		"Creality Ender-5S 0.4 nozzle",
+		"Creality Ender-5 S1 0.4 nozzle",
+		"Creality Ender-6 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PC @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PC @K1-all.json
new file mode 100644
index 0000000..dd9b382
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PC @K1-all.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Creality Generic PC @K1-all",
+    "inherits": "Creality Generic PC",
+    "from": "system",
+    "setting_id": "GFSC99_06",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Creality K1 (0.4 nozzle)",
+        "Creality K1 (0.6 nozzle)",
+        "Creality K1 (0.8 nozzle)",
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
+        "Creality K1 Max (0.4 nozzle)",
+        "Creality K1 Max (0.6 nozzle)",
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PC.json b/OrcaSlicer/system/Creality/filament/Creality Generic PC.json
new file mode 100644
index 0000000..800c1c9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PC.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Creality Generic PC",
+    "inherits": "fdm_filament_pc",
+    "from": "system",
+    "filament_id": "GFC99",
+    "instantiation": "false",
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-3V3-all.json
new file mode 100644
index 0000000..6b93b85
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-3V3-all.json	
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+    "setting_id": "GFSG99_00",
+	"name": "Creality Generic PETG @Ender-3V3-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic PETG",
+	"filament_max_volumetric_speed": ["9"],
+	"slow_down_layer_time": ["5"],
+    "cool_plate_temp" : ["70"],
+    "eng_plate_temp" : ["70"],
+    "hot_plate_temp" : ["70"],
+    "textured_plate_temp" : ["70"],
+    "cool_plate_temp_initial_layer" : ["70"],
+    "eng_plate_temp_initial_layer" : ["70"],
+    "hot_plate_temp_initial_layer" : ["70"],
+    "textured_plate_temp_initial_layer" : ["70"],
+    "nozzle_temperature_initial_layer": ["250"],
+    "nozzle_temperature": ["250"],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-5Max-all.json
new file mode 100644
index 0000000..a991a63
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "06001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic PETG @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "70",
+    "cool_plate_temp_initial_layer": "70",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "0",
+    "eng_plate_temp_initial_layer": "0",
+    "fan_cooling_layer_time": "30",
+    "fan_max_speed": "100",
+    "fan_min_speed": "100",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "14",
+    "filament_density": "1.23",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.85",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "30",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "0",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "PETG"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "70",
+    "hot_plate_temp_initial_layer": "70",
+    "nozzle_temperature": "250",
+    "nozzle_temperature_initial_layer": "250",
+    "nozzle_temperature_range_high": "270",
+    "nozzle_temperature_range_low": "220",
+    "overhang_fan_speed": "100",
+    "overhang_fan_threshold": "25%",
+    "pressure_advance": "0.038",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "8",
+    "slow_down_min_speed": "10",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "80",
+    "textured_plate_temp": "70",
+    "textured_plate_temp_initial_layer": "70"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Hi-all.json
new file mode 100644
index 0000000..a5d13fd
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Hi-all.json	
@@ -0,0 +1,25 @@
+{
+	"type": "filament",
+    "setting_id": "GFSG99_00",
+	"name": "Creality Generic PETG @Hi-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic PETG",
+	"filament_max_volumetric_speed": ["9"],
+	"slow_down_layer_time": ["5"],
+    "cool_plate_temp" : ["70"],
+    "eng_plate_temp" : ["70"],
+    "hot_plate_temp" : ["70"],
+    "textured_plate_temp" : ["70"],
+    "cool_plate_temp_initial_layer" : ["70"],
+    "eng_plate_temp_initial_layer" : ["70"],
+    "hot_plate_temp_initial_layer" : ["70"],
+    "textured_plate_temp_initial_layer" : ["70"],
+    "nozzle_temperature_initial_layer": ["250"],
+    "nozzle_temperature": ["250"],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"],
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K1-all.json
new file mode 100644
index 0000000..22600d8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K1-all.json	
@@ -0,0 +1,56 @@
+{
+    "type": "filament",
+    "setting_id": "GFSG99_00",
+    "name": "Creality Generic PETG @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PETG",
+    "filament_max_volumetric_speed": [
+        "9"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "cool_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K2-all.json
new file mode 100644
index 0000000..c01d3e4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K2-all.json	
@@ -0,0 +1,60 @@
+{
+    "type": "filament",
+    "setting_id": "GFSG99_00",
+    "name": "Creality Generic PETG @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PETG",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "cool_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "50"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PETG-CF @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PETG-CF @Hi-all.json
new file mode 100644
index 0000000..e09239c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PETG-CF @Hi-all.json	
@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+    "setting_id": "GFSG99_00",
+	"name": "Creality Generic PETG-CF @Hi-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic PETG @Hi-all",
+	"filament_max_volumetric_speed": ["9"],
+	"filament_flow_ratio": ["0.95"],
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PETG.json b/OrcaSlicer/system/Creality/filament/Creality Generic PETG.json
new file mode 100644
index 0000000..365e513
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PETG.json	
@@ -0,0 +1,74 @@
+{
+	"type": "filament",
+	"filament_id": "GFG99",
+	"setting_id": "GFSA04",
+	"name": "Creality Generic PETG",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pet",
+	"reduce_fan_stop_start_freq": ["1"],
+	"slow_down_for_layer_cooling": ["1"],
+	"fan_cooling_layer_time": ["30"],
+	"overhang_fan_speed": ["90"],
+	"overhang_fan_threshold": ["25%"],
+	"fan_max_speed": ["90"],
+	"fan_min_speed": ["40"],
+	"slow_down_min_speed": ["10"],
+	"slow_down_layer_time": ["8"],
+	"filament_flow_ratio": ["0.95"],
+	"filament_max_volumetric_speed": ["10"],
+	"filament_start_gcode": ["; filament start gcode\n"],
+	"compatible_printers": [
+		"Creality CR-10 V2 0.4 nozzle",
+		"Creality CR-10 Max 0.4 nozzle",
+		"Creality CR-6 SE 0.2 nozzle",
+		"Creality CR-6 SE 0.4 nozzle",
+		"Creality CR-6 SE 0.6 nozzle",
+		"Creality CR-6 SE 0.8 nozzle",
+		"Creality CR-6 Max 0.2 nozzle",
+		"Creality CR-6 Max 0.4 nozzle",
+		"Creality CR-6 Max 0.6 nozzle",
+		"Creality CR-6 Max 0.8 nozzle",
+		"Creality Sermoon V1 0.4 nozzle",
+		"Creality Ender-3 0.2 nozzle",
+		"Creality Ender-3 0.4 nozzle",
+		"Creality Ender-3 0.6 nozzle",
+		"Creality Ender-3 0.8 nozzle",
+		"Creality Ender-3 Pro 0.2 nozzle",
+		"Creality Ender-3 Pro 0.4 nozzle",
+		"Creality Ender-3 Pro 0.6 nozzle",
+		"Creality Ender-3 Pro 0.8 nozzle",
+		"Creality Ender-3 V2 0.4 nozzle",
+		"Creality Ender-3 V2 Neo 0.4 nozzle",
+		"Creality Ender-3 S1 0.4 nozzle",
+		"Creality Ender-3 S1 Pro 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.2 nozzle",
+		"Creality Ender-3 S1 Plus 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.6 nozzle",
+		"Creality Ender-3 S1 Plus 0.8 nozzle",
+		"Creality Ender-5 0.4 nozzle",
+		"Creality Ender-5 Plus 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.2 nozzle",
+		"Creality Ender-5 Pro (2019) 0.25 nozzle",
+		"Creality Ender-5 Pro (2019) 0.3 nozzle",
+		"Creality Ender-5 Pro (2019) 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.5 nozzle",
+		"Creality Ender-5 Pro (2019) 0.6 nozzle",
+		"Creality Ender-5 Pro (2019) 0.8 nozzle",
+		"Creality Ender-5 Pro (2019) 1.0 nozzle",
+		"Creality Ender-5S 0.4 nozzle",
+		"Creality Ender-5 S1 0.4 nozzle",
+		"Creality Ender-6 0.4 nozzle",
+		"Creality K1 (0.4 nozzle)",
+		"Creality K1 (0.6 nozzle)",
+		"Creality K1 (0.8 nozzle)",
+		"Creality K1 Max (0.4 nozzle)",
+		"Creality K1 Max (0.6 nozzle)",
+		"Creality K1 Max (0.8 nozzle)",
+		"Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle",
+		"Creality CR-M4 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-3V3-all.json
new file mode 100644
index 0000000..e2f8941
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-3V3-all.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+    "setting_id": "GFSL99_00",
+	"name": "Creality Generic PLA @Ender-3V3-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic PLA",
+	"filament_max_volumetric_speed": ["18"],
+	"slow_down_min_speed": ["20"],
+    "cool_plate_temp" : ["55"],
+    "eng_plate_temp" : ["55"],
+    "hot_plate_temp" : ["55"],
+    "textured_plate_temp" : ["55"],
+    "cool_plate_temp_initial_layer" : ["55"],
+    "eng_plate_temp_initial_layer" : ["55"],
+    "hot_plate_temp_initial_layer" : ["55"],
+    "textured_plate_temp_initial_layer" : ["55"],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-5Max-all.json
new file mode 100644
index 0000000..6d57398
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "04001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic PLA @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "45",
+    "cool_plate_temp_initial_layer": "45",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "50",
+    "eng_plate_temp_initial_layer": "50",
+    "fan_cooling_layer_time": "100",
+    "fan_max_speed": "100",
+    "fan_min_speed": "100",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "20",
+    "filament_density": "1.24",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.9",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "40",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "0",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Generic"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "45",
+    "hot_plate_temp_initial_layer": "45",
+    "nozzle_temperature": "220",
+    "nozzle_temperature_initial_layer": "220",
+    "nozzle_temperature_range_high": "240",
+    "nozzle_temperature_range_low": "190",
+    "overhang_fan_speed": "100",
+    "overhang_fan_threshold": "25%",
+    "pressure_advance": "0.03",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "5",
+    "slow_down_min_speed": "10",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "60",
+    "textured_plate_temp": "45",
+    "textured_plate_temp_initial_layer": "45"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Hi-all.json
new file mode 100644
index 0000000..39ff7bf
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Hi-all.json	
@@ -0,0 +1,94 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL99_00",
+    "name": "Creality Generic PLA @Hi-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "cool_plate_temp": [
+        "55"
+    ],
+    "eng_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "55"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ],
+    "filament_cooling_final_speed": [
+        "3.4"
+    ],
+    "filament_cooling_initial_speed": [
+        "2.2"
+    ],
+    "filament_cooling_moves": [
+        "4"
+    ],
+    "filament_load_time": [
+        "0"
+    ],
+    "filament_loading_speed": [
+        "28"
+    ],
+    "filament_loading_speed_start": [
+        "3"
+    ],
+    "filament_toolchange_delay": [
+        "0"
+    ],
+    "filament_unload_time": [
+        "0"
+    ],
+    "filament_unloading_speed": [
+        "90"
+    ],
+    "filament_unloading_speed_start": [
+        "100"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_multitool_ramming": [
+        "0"
+    ],
+    "filament_multitool_ramming_flow": [
+        "0"
+    ],
+    "filament_multitool_ramming_volume": [
+        "0"
+    ],
+    "filament_notes": [
+        ""
+    ],
+    "filament_ramming_parameters": [
+        "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+    ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"],
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle",
+        "Creality Hi 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K1-all.json
new file mode 100644
index 0000000..458e578
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K1-all.json	
@@ -0,0 +1,47 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL99_00",
+    "name": "Creality Generic PLA @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "cool_plate_temp": [
+        "55"
+    ],
+    "eng_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "55"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K2-all.json
new file mode 100644
index 0000000..3bbc824
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K2-all.json	
@@ -0,0 +1,54 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL99_00",
+    "name": "Creality Generic PLA @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "cool_plate_temp": [
+        "50"
+    ],
+    "eng_plate_temp": [
+        "50"
+    ],
+    "hot_plate_temp": [
+        "50"
+    ],
+    "textured_plate_temp": [
+        "50"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "50"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "50"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "50"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "50"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json
new file mode 100644
index 0000000..4c26875
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json	
@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL95_00",
+    "name": "Creality Generic PLA High Speed @Ender-3V3-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @Ender-3V3-all",
+    "filament_max_volumetric_speed": [
+        "23"
+    ],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Hi-all.json
new file mode 100644
index 0000000..b661edd
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Hi-all.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL95_00",
+    "name": "Creality Generic PLA High Speed @Hi-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @Hi-all",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "23"
+    ],
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K1-all.json
new file mode 100644
index 0000000..1f4bc1e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K1-all.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL95_00",
+    "name": "Creality Generic PLA High Speed @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K1-all",
+    "filament_max_volumetric_speed": [
+        "23"
+    ],
+    "compatible_printers": [
+		"Creality K1 (0.4 nozzle)",
+		"Creality K1 (0.6 nozzle)",
+		"Creality K1 (0.8 nozzle)",
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
+		"Creality K1 Max (0.4 nozzle)",
+		"Creality K1 Max (0.6 nozzle)",
+		"Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K2-all.json
new file mode 100644
index 0000000..e6572ec
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K2-all.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL95_00",
+    "name": "Creality Generic PLA High Speed @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K2-all",
+    "filament_max_volumetric_speed": [
+        "23"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json
new file mode 100644
index 0000000..743bb8c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+    "setting_id": "GFSL05_00",
+	"name": "Creality Generic PLA Matte @Ender-3V3-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic PLA @Ender-3V3-all",
+	"filament_max_volumetric_speed": ["18"],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Hi-all.json
new file mode 100644
index 0000000..540725c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Hi-all.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL05_00",
+    "name": "Creality Generic PLA Matte @Hi-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @Hi-all",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle",
+        "Creality Hi 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K1-all.json
new file mode 100644
index 0000000..ce0da80
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K1-all.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL05_00",
+    "name": "Creality Generic PLA Matte @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K1-all",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+		"Creality K1 (0.4 nozzle)",
+		"Creality K1 (0.6 nozzle)",
+		"Creality K1 (0.8 nozzle)",
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
+		"Creality K1 Max (0.4 nozzle)",
+		"Creality K1 Max (0.6 nozzle)",
+		"Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K2-all.json
new file mode 100644
index 0000000..354200f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K2-all.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL05_00",
+    "name": "Creality Generic PLA Matte @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K2-all",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json
new file mode 100644
index 0000000..389abbe
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+    "setting_id": "GFSL96_00",
+	"name": "Creality Generic PLA Silk @Ender-3V3-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic PLA @Ender-3V3-all",
+	"filament_max_volumetric_speed": ["7.5"],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Hi-all.json
new file mode 100644
index 0000000..dfb79cb
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Hi-all.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA Silk @Hi-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @Hi-all",
+    "filament_flow_ratio": [
+        "0.97"
+    ],
+    "filament_max_volumetric_speed": [
+        "7.5"
+    ],
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle",
+        "Creality Hi 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K1-all.json
new file mode 100644
index 0000000..2c4c848
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K1-all.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA Silk @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K1-all",
+    "filament_max_volumetric_speed": [
+        "7.5"
+    ],
+    "compatible_printers": [
+		"Creality K1 (0.4 nozzle)",
+		"Creality K1 (0.6 nozzle)",
+		"Creality K1 (0.8 nozzle)",
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
+		"Creality K1 Max (0.4 nozzle)",
+		"Creality K1 Max (0.6 nozzle)",
+		"Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K2-all.json
new file mode 100644
index 0000000..4f3c356
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K2-all.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA Silk @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K2-all",
+    "filament_max_volumetric_speed": [
+        "10"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA Wood @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Wood @Hi-all.json
new file mode 100644
index 0000000..fdabf19
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA Wood @Hi-all.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA Wood @Hi-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @Hi-all",
+    "filament_flow_ratio": [
+        "0.88"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle",
+        "Creality Hi 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @Hi-all.json
new file mode 100644
index 0000000..96712a3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @Hi-all.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA-CF @Hi-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA-CF",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle",
+        "Creality Hi 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K1-all.json
new file mode 100644
index 0000000..d620e43
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K1-all.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA-CF @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA-CF",
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "compatible_printers": [
+        "Creality K1 (0.4 nozzle)",
+        "Creality K1 (0.6 nozzle)",
+        "Creality K1 (0.8 nozzle)",
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
+        "Creality K1 Max (0.4 nozzle)",
+        "Creality K1 Max (0.6 nozzle)",
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K2-all.json
new file mode 100644
index 0000000..e76726a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K2-all.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA-CF @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA-CF",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF.json
new file mode 100644
index 0000000..dae1cfc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF.json	
@@ -0,0 +1,60 @@
+{
+    "type": "filament",
+    "filament_id": "GFL98",
+    "name": "Creality Generic PLA-CF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_type": [
+        "PLA-CF"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+	"compatible_printers": [
+		"Creality CR-10 V2 0.4 nozzle",
+		"Creality CR-10 Max 0.4 nozzle",
+		"Creality CR-6 SE 0.2 nozzle",
+		"Creality CR-6 SE 0.4 nozzle",
+		"Creality CR-6 SE 0.6 nozzle",
+		"Creality CR-6 SE 0.8 nozzle",
+		"Creality CR-6 Max 0.2 nozzle",
+		"Creality CR-6 Max 0.4 nozzle",
+		"Creality CR-6 Max 0.6 nozzle",
+		"Creality CR-6 Max 0.8 nozzle",
+		"Creality Ender-3 0.2 nozzle",
+		"Creality Ender-3 0.4 nozzle",
+		"Creality Ender-3 0.6 nozzle",
+		"Creality Ender-3 0.8 nozzle",
+		"Creality Ender-3 Pro 0.2 nozzle",
+		"Creality Ender-3 Pro 0.4 nozzle",
+		"Creality Ender-3 Pro 0.6 nozzle",
+		"Creality Ender-3 Pro 0.8 nozzle",
+		"Creality Ender-3 V2 0.4 nozzle",
+		"Creality Ender-3 V2 Neo 0.4 nozzle",
+		"Creality Ender-3 S1 0.4 nozzle",
+		"Creality Ender-3 S1 Pro 0.4 nozzle",
+		"Creality Ender-5 0.4 nozzle",
+		"Creality Ender-5 Plus 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.2 nozzle",
+		"Creality Ender-5 Pro (2019) 0.25 nozzle",
+		"Creality Ender-5 Pro (2019) 0.3 nozzle",
+		"Creality Ender-5 Pro (2019) 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.5 nozzle",
+		"Creality Ender-5 Pro (2019) 0.6 nozzle",
+		"Creality Ender-5 Pro (2019) 0.8 nozzle",
+		"Creality Ender-5 Pro (2019) 1.0 nozzle",
+		"Creality Ender-5S 0.4 nozzle",
+		"Creality Ender-5 S1 0.4 nozzle",
+		"Creality Ender-6 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic PLA.json b/OrcaSlicer/system/Creality/filament/Creality Generic PLA.json
new file mode 100644
index 0000000..a81b71a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic PLA.json	
@@ -0,0 +1,65 @@
+{
+	"type": "filament",
+	"filament_id": "GFL99",
+	"setting_id": "GFSA04",
+	"name": "Creality Generic PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_flow_ratio": ["0.98"],
+	"filament_max_volumetric_speed": ["12"],
+	"slow_down_layer_time": ["8"],
+	"compatible_printers": [
+		"Creality CR-10 V2 0.4 nozzle",
+		"Creality CR-10 Max 0.4 nozzle",
+		"Creality CR-6 SE 0.2 nozzle",
+		"Creality CR-6 SE 0.4 nozzle",
+		"Creality CR-6 SE 0.6 nozzle",
+		"Creality CR-6 SE 0.8 nozzle",
+		"Creality CR-6 Max 0.2 nozzle",
+		"Creality CR-6 Max 0.4 nozzle",
+		"Creality CR-6 Max 0.6 nozzle",
+		"Creality CR-6 Max 0.8 nozzle",
+		"Creality Sermoon V1 0.4 nozzle",
+		"Creality Ender-3 0.2 nozzle",
+		"Creality Ender-3 0.4 nozzle",
+		"Creality Ender-3 0.6 nozzle",
+		"Creality Ender-3 0.8 nozzle",
+		"Creality Ender-3 Pro 0.2 nozzle",
+		"Creality Ender-3 Pro 0.4 nozzle",
+		"Creality Ender-3 Pro 0.6 nozzle",
+		"Creality Ender-3 Pro 0.8 nozzle",
+		"Creality Ender-3 V2 0.4 nozzle",
+		"Creality Ender-3 V2 Neo 0.4 nozzle",
+		"Creality Ender-3 S1 0.4 nozzle",
+		"Creality Ender-3 S1 Pro 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.2 nozzle",
+		"Creality Ender-3 S1 Plus 0.4 nozzle",
+		"Creality Ender-3 S1 Plus 0.6 nozzle",
+		"Creality Ender-3 S1 Plus 0.8 nozzle",
+		"Creality Ender-5 0.4 nozzle",
+		"Creality Ender-5 Plus 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.2 nozzle",
+		"Creality Ender-5 Pro (2019) 0.25 nozzle",
+		"Creality Ender-5 Pro (2019) 0.3 nozzle",
+		"Creality Ender-5 Pro (2019) 0.4 nozzle",
+		"Creality Ender-5 Pro (2019) 0.5 nozzle",
+		"Creality Ender-5 Pro (2019) 0.6 nozzle",
+		"Creality Ender-5 Pro (2019) 0.8 nozzle",
+		"Creality Ender-5 Pro (2019) 1.0 nozzle",
+		"Creality Ender-5S 0.4 nozzle",
+		"Creality Ender-5 S1 0.4 nozzle",
+		"Creality Ender-6 0.4 nozzle",
+		"Creality K1 (0.4 nozzle)",
+		"Creality K1 (0.6 nozzle)",
+		"Creality K1 (0.8 nozzle)",
+		"Creality K1 Max (0.4 nozzle)",
+		"Creality K1 Max (0.6 nozzle)",
+		"Creality K1 Max (0.8 nozzle)",
+		"Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle",
+		"Creality CR-M4 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-3V3-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-3V3-all.json
new file mode 100644
index 0000000..a776cc8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-3V3-all.json	
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"setting_id": "GFU99_CREALITY_00",
+	"name": "Creality Generic TPU @Ender-3V3-all",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "Creality Generic TPU",
+	"hot_plate_temp": ["30"],
+	"hot_plate_temp_initial_layer": ["30"],
+	"textured_plate_temp": ["30"],
+	"textured_plate_temp_initial_layer": ["30"],
+	"nozzle_temperature_initial_layer": ["230"],
+	"nozzle_temperature": ["230"],
+	"filament_max_volumetric_speed": ["3.5"],
+	"slow_down_layer_time": ["5"],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-5Max-all.json
new file mode 100644
index 0000000..6609e30
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "10001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic TPU @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "45",
+    "cool_plate_temp_initial_layer": "45",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "0",
+    "eng_plate_temp": "35",
+    "eng_plate_temp_initial_layer": "35",
+    "fan_cooling_layer_time": "100",
+    "fan_max_speed": "100",
+    "fan_min_speed": "100",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "20",
+    "filament_density": "1.26",
+    "filament_deretraction_speed": "30",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "1",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "2",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "nil",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "3",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "30",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "TPU"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "45",
+    "hot_plate_temp_initial_layer": "45",
+    "nozzle_temperature": "195",
+    "nozzle_temperature_initial_layer": "195",
+    "nozzle_temperature_range_high": "220",
+    "nozzle_temperature_range_low": "200",
+    "overhang_fan_speed": "100",
+    "overhang_fan_threshold": "50%",
+    "pressure_advance": "0.02",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "8",
+    "slow_down_min_speed": "5",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "60",
+    "textured_plate_temp": "45",
+    "textured_plate_temp_initial_layer": "45"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Hi-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Hi-all.json
new file mode 100644
index 0000000..f98b6f6
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Hi-all.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "setting_id": "GFU99_CREALITY_00",
+    "name": "Creality Generic TPU @Hi-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic TPU",
+    "hot_plate_temp": [
+        "30"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "30"
+    ],
+    "textured_plate_temp": [
+        "30"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "30"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "filament_max_volumetric_speed": [
+        "3.5"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"],
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle",
+        "Creality Hi 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K1-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K1-all.json
new file mode 100644
index 0000000..48c4d40
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K1-all.json	
@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "setting_id": "GFU99_CREALITY_00",
+    "name": "Creality Generic TPU @K1-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic TPU",
+    "hot_plate_temp": [
+        "30"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "30"
+    ],
+    "textured_plate_temp": [
+        "30"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "30"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "filament_max_volumetric_speed": [
+        "3.5"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K2-all.json b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K2-all.json
new file mode 100644
index 0000000..1c0d417
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K2-all.json	
@@ -0,0 +1,42 @@
+{
+    "type": "filament",
+    "setting_id": "GFU99_CREALITY_00",
+    "name": "Creality Generic TPU @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic TPU",
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "filament_max_volumetric_speed": [
+        "3"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Generic TPU.json b/OrcaSlicer/system/Creality/filament/Creality Generic TPU.json
new file mode 100644
index 0000000..497c9fa
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Generic TPU.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFU99",
+    "setting_id": "GFSA04",
+    "name": "Creality Generic TPU",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_tpu",
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "compatible_printers": [
+        "Creality K1 (0.4 nozzle)",
+        "Creality K1 (0.6 nozzle)",
+        "Creality K1 (0.8 nozzle)",
+        "Creality K1 Max (0.4 nozzle)",
+        "Creality K1 Max (0.6 nozzle)",
+        "Creality K1 Max (0.8 nozzle)",
+	"Creality Sermoon V1 0.4 nozzle",
+        "Creality CR-10 SE 0.2 nozzle",
+	"Creality CR-10 SE 0.4 nozzle",
+	"Creality CR-10 SE 0.6 nozzle",
+	"Creality CR-10 SE 0.8 nozzle",
+        "Creality Ender-3 S1 Pro 0.4 nozzle",
+	"Creality Ender-3 S1 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/filament/Creality HF Generic PLA.json b/OrcaSlicer/system/Creality/filament/Creality HF Generic PLA.json
new file mode 100644
index 0000000..8fa92dc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality HF Generic PLA.json	
@@ -0,0 +1,33 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "Creality HF Generic PLA",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla",
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Creality K1 (0.4 nozzle)",
+        "Creality K1 (0.6 nozzle)",
+        "Creality K1 (0.8 nozzle)",
+        "Creality K1 Max (0.4 nozzle)",
+        "Creality K1 Max (0.6 nozzle)",
+        "Creality K1 Max (0.8 nozzle)",
+        "Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality HF Generic Speed PLA.json b/OrcaSlicer/system/Creality/filament/Creality HF Generic Speed PLA.json
new file mode 100644
index 0000000..ba95e7d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality HF Generic Speed PLA.json	
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"filament_id": "GFL99",
+	"setting_id": "GFSA04",
+	"name": "Creality HF Generic Speed PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_flow_ratio": ["0.98"],
+	"filament_max_volumetric_speed": ["23"],
+	"slow_down_layer_time": ["5"],
+    "slow_down_min_speed": [
+        "20"
+    ],
+	"compatible_printers": [
+		"Creality K1 (0.4 nozzle)",
+		"Creality K1 (0.6 nozzle)",
+		"Creality K1 (0.8 nozzle)",
+		"Creality K1 Max (0.4 nozzle)",
+		"Creality K1 Max (0.6 nozzle)",
+		"Creality K1 Max (0.8 nozzle)",
+		"Creality CR-10 SE 0.2 nozzle",
+		"Creality CR-10 SE 0.4 nozzle",
+		"Creality CR-10 SE 0.6 nozzle",
+		"Creality CR-10 SE 0.8 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json
new file mode 100644
index 0000000..7608651
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "03001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Hyper ABS @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "3",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "90",
+    "cool_plate_temp_initial_layer": "90",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "105",
+    "eng_plate_temp_initial_layer": "105",
+    "fan_cooling_layer_time": "30",
+    "fan_max_speed": "20",
+    "fan_min_speed": "20",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "15",
+    "filament_density": "1.08",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.92",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "60",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "0",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "90",
+    "hot_plate_temp_initial_layer": "90",
+    "nozzle_temperature": "260",
+    "nozzle_temperature_initial_layer": "260",
+    "nozzle_temperature_range_high": "260",
+    "nozzle_temperature_range_low": "230",
+    "overhang_fan_speed": "20",
+    "overhang_fan_threshold": "25%",
+    "pressure_advance": "0.025",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "5",
+    "slow_down_min_speed": "10",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "110",
+    "textured_plate_temp": "90",
+    "textured_plate_temp_initial_layer": "90"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json
new file mode 100644
index 0000000..fc03414
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json	
@@ -0,0 +1,100 @@
+{
+    "type": "filament",
+    "filament_id": "01001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Hyper PLA @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "0",
+    "close_fan_the_first_x_layers": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "45",
+    "cool_plate_temp_initial_layer": "45",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "50",
+    "eng_plate_temp_initial_layer": "50",
+    "fan_cooling_layer_time": "100",
+    "fan_max_speed": "100",
+    "fan_min_speed": "100",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "30",
+    "filament_density": "1.24",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.97",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "50",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "nil",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_shrinkage_compensation_z": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "45",
+    "hot_plate_temp_initial_layer": "45",
+    "nozzle_temperature": "220",
+    "nozzle_temperature_initial_layer": "220",
+    "nozzle_temperature_range_high": "240",
+    "nozzle_temperature_range_low": "190",
+    "overhang_fan_speed": "100",
+    "overhang_fan_threshold": "50%",
+    "pressure_advance": "0.04",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "5",
+    "slow_down_min_speed": "20",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "60",
+    "textured_plate_temp": "45",
+    "textured_plate_temp_initial_layer": "45"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json
new file mode 100644
index 0000000..cf0507c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "02001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Hyper PLA-CF @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "45",
+    "cool_plate_temp_initial_layer": "45",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "50",
+    "eng_plate_temp_initial_layer": "50",
+    "fan_cooling_layer_time": "100",
+    "fan_max_speed": "100",
+    "fan_min_speed": "100",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "32",
+    "filament_density": "1.27",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.9",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "40",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "nil",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "PLA-CF"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "45",
+    "hot_plate_temp_initial_layer": "45",
+    "nozzle_temperature": "220",
+    "nozzle_temperature_initial_layer": "220",
+    "nozzle_temperature_range_high": "240",
+    "nozzle_temperature_range_low": "190",
+    "overhang_fan_speed": "100",
+    "overhang_fan_threshold": "50%",
+    "pressure_advance": "0.035",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "5",
+    "slow_down_min_speed": "10",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "60",
+    "textured_plate_temp": "45",
+    "textured_plate_temp_initial_layer": "45"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/Creality Silk PLA @Ender-5Max-all.json b/OrcaSlicer/system/Creality/filament/Creality Silk PLA @Ender-5Max-all.json
new file mode 100644
index 0000000..300a7f0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/Creality Silk PLA @Ender-5Max-all.json	
@@ -0,0 +1,99 @@
+{
+    "type": "filament",
+    "filament_id": "05001",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Silk PLA @Ender-5Max-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "45",
+    "cool_plate_temp_initial_layer": "45",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "50",
+    "eng_plate_temp_initial_layer": "50",
+    "fan_cooling_layer_time": "100",
+    "fan_max_speed": "100",
+    "fan_min_speed": "100",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": "22",
+    "filament_density": "1.25",
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.85",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": "20",
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "nil",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "45",
+    "hot_plate_temp_initial_layer": "45",
+    "nozzle_temperature": "230",
+    "nozzle_temperature_initial_layer": "230",
+    "nozzle_temperature_range_high": "240",
+    "nozzle_temperature_range_low": "190",
+    "overhang_fan_speed": "100",
+    "overhang_fan_threshold": "50%",
+    "pressure_advance": "0.02",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "5",
+    "slow_down_min_speed": "10",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": "60",
+    "textured_plate_temp": "45",
+    "textured_plate_temp_initial_layer": "45"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/fdm_filament_abs.json b/OrcaSlicer/system/Creality/filament/fdm_filament_abs.json
new file mode 100644
index 0000000..b9d4eed
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/fdm_filament_abs.json
@@ -0,0 +1,88 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_abs",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "105"
+    ],
+    "eng_plate_temp" : [
+        "105"
+    ],
+    "hot_plate_temp" : [
+        "105"
+    ],
+    "textured_plate_temp" : [
+        "105"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "filament_max_volumetric_speed": [
+        "28.6"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/filament/fdm_filament_asa.json b/OrcaSlicer/system/Creality/filament/fdm_filament_asa.json
new file mode 100644
index 0000000..050d1c2
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/fdm_filament_asa.json
@@ -0,0 +1,85 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_asa",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "105"
+    ],
+    "eng_plate_temp" : [
+        "105"
+    ],
+    "hot_plate_temp" : [
+        "105"
+    ],
+    "textured_plate_temp" : [
+        "100"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "35"
+    ],
+    "filament_max_volumetric_speed": [
+        "28.6"
+    ],
+    "filament_type": [
+        "ASA"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/filament/fdm_filament_common.json b/OrcaSlicer/system/Creality/filament/fdm_filament_common.json
new file mode 100644
index 0000000..9f77975
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/fdm_filament_common.json
@@ -0,0 +1,144 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "textured_plate_temp" : [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "0"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "0"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_settings_id": [
+        ""
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_vendor": [
+        "Generic"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "35"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/filament/fdm_filament_pa.json b/OrcaSlicer/system/Creality/filament/fdm_filament_pa.json
new file mode 100644
index 0000000..1cd78ec
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/fdm_filament_pa.json
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pa",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "4"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "PA"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature_range_high": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "30"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "108"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/fdm_filament_pc.json b/OrcaSlicer/system/Creality/filament/fdm_filament_pc.json
new file mode 100644
index 0000000..5729114
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/fdm_filament_pc.json
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pc",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "110"
+    ],
+    "hot_plate_temp": [
+        "110"
+    ],
+    "textured_plate_temp": [
+        "110"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "110"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "110"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "110"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "filament_max_volumetric_speed": [
+        "23.2"
+    ],
+    "filament_type": [
+        "PC"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "temperature_vitrification": [
+        "120"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/filament/fdm_filament_pet.json b/OrcaSlicer/system/Creality/filament/fdm_filament_pet.json
new file mode 100644
index 0000000..2cbef62
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/fdm_filament_pet.json
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pet",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "0"
+    ],
+    "hot_plate_temp" : [
+        "80"
+    ],
+    "textured_plate_temp" : [
+        "80"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "80"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "filament_max_volumetric_speed": [
+        "25"
+    ],
+    "filament_type": [
+        "PETG"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "temperature_vitrification": [
+        "80"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/filament/fdm_filament_pla.json b/OrcaSlicer/system/Creality/filament/fdm_filament_pla.json
new file mode 100644
index 0000000..82c6772
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/fdm_filament_pla.json
@@ -0,0 +1,94 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pla",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "textured_plate_temp" : [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/filament/fdm_filament_tpu.json b/OrcaSlicer/system/Creality/filament/fdm_filament_tpu.json
new file mode 100644
index 0000000..d5cc57f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/filament/fdm_filament_tpu.json
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_tpu",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "30"
+    ],
+    "eng_plate_temp" : [
+        "30"
+    ],
+    "hot_plate_temp" : [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "30"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "30"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "35"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 Max 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
new file mode 100644
index 0000000..b1fb9bf
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 Max 0.4 nozzle.json	
@@ -0,0 +1,26 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-10 Max 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-10 Max",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality CR10Max",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_area": [
+    "0x0",
+    "450x0",
+    "450x450",
+    "0x450"
+  ],
+  "printable_height": "470",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 Max.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 Max.json
new file mode 100644
index 0000000..1a49a81
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 Max.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality CR-10 Max",
+    "model_id": "Creality_CR-10_Max",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_cr10max_buildplate_model.stl",
+    "bed_texture": "creality_cr10max_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.2 nozzle.json
new file mode 100644
index 0000000..4911adf
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.2 nozzle.json	
@@ -0,0 +1,128 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality CR-10 SE 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality CR-10 SE",
+    "printer_variant": "0.2",
+    "printer_structure": "i3",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.2",
+    "nozzle_diameter": [
+      "0.2"
+    ],
+    "printable_area": [
+      "0x0",
+      "220x0",
+      "220x220",
+      "0x220"
+    ],
+    "printable_height": "265",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_radius": "65",
+    "nozzle_type": "hardened_steel",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "8000",
+      "8000"
+    ],
+    "machine_max_acceleration_y": [
+      "8000",
+      "8000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_speed_e": [
+      "100",
+      "100"
+    ],
+    "machine_max_speed_x": [
+      "600",
+      "600"
+    ],
+    "machine_max_speed_y": [
+      "600",
+      "600"
+    ],
+    "machine_max_speed_z": [
+      "30",
+      "30"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "10",
+      "10"
+    ],
+    "machine_max_jerk_y": [
+      "10",
+      "10"
+    ],
+    "machine_max_jerk_z": [
+      "2",
+      "2"
+    ],
+    "max_layer_height": [
+      "0.16"
+    ],
+    "min_layer_height": [
+      "0.04"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+      "2"
+    ],
+    "retract_before_wipe": [
+      "70%"
+    ],
+    "retraction_length": [
+      "0.8"
+    ],
+    "retract_length_toolchange": [
+      "2"
+    ],
+    "retraction_speed": [
+      "30"
+    ],
+    "deretraction_speed": [
+      "40"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+      "Creality Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
+    "scan_first_layer": "0",
+    "thumbnails": [
+      "96x96",
+      "300x300"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.4 nozzle.json
new file mode 100644
index 0000000..6214d68
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.4 nozzle.json	
@@ -0,0 +1,128 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality CR-10 SE 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality CR-10 SE",
+    "printer_variant": "0.4",
+    "printer_structure": "i3",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.4",
+    "nozzle_diameter": [
+      "0.4"
+    ],
+    "printable_area": [
+      "0x0",
+      "220x0",
+      "220x220",
+      "0x220"
+    ],
+    "printable_height": "265",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_radius": "65",
+    "nozzle_type": "hardened_steel",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "8000",
+      "8000"
+    ],
+    "machine_max_acceleration_y": [
+      "8000",
+      "8000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_speed_e": [
+      "100",
+      "100"
+    ],
+    "machine_max_speed_x": [
+      "600",
+      "600"
+    ],
+    "machine_max_speed_y": [
+      "600",
+      "600"
+    ],
+    "machine_max_speed_z": [
+      "30",
+      "30"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "10",
+      "10"
+    ],
+    "machine_max_jerk_y": [
+      "10",
+      "10"
+    ],
+    "machine_max_jerk_z": [
+      "2",
+      "2"
+    ],
+    "max_layer_height": [
+      "0.32"
+    ],
+    "min_layer_height": [
+      "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+      "2"
+    ],
+    "retract_before_wipe": [
+      "70%"
+    ],
+    "retraction_length": [
+      "0.8"
+    ],
+    "retract_length_toolchange": [
+      "2"
+    ],
+    "retraction_speed": [
+      "30"
+    ],
+    "deretraction_speed": [
+      "40"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+      "Creality Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
+    "scan_first_layer": "0",
+    "thumbnails": [
+      "96x96",
+      "300x300"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.6 nozzle.json
new file mode 100644
index 0000000..fbcb5d3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.6 nozzle.json	
@@ -0,0 +1,128 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality CR-10 SE 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality CR-10 SE",
+    "printer_variant": "0.6",
+    "printer_structure": "i3",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.6",
+    "nozzle_diameter": [
+      "0.6"
+    ],
+    "printable_area": [
+      "0x0",
+      "220x0",
+      "220x220",
+      "0x220"
+    ],
+    "printable_height": "265",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_radius": "65",
+    "nozzle_type": "hardened_steel",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "8000",
+      "8000"
+    ],
+    "machine_max_acceleration_y": [
+      "8000",
+      "8000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_speed_e": [
+      "100",
+      "100"
+    ],
+    "machine_max_speed_x": [
+      "600",
+      "600"
+    ],
+    "machine_max_speed_y": [
+      "600",
+      "600"
+    ],
+    "machine_max_speed_z": [
+      "30",
+      "30"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "10",
+      "10"
+    ],
+    "machine_max_jerk_y": [
+      "10",
+      "10"
+    ],
+    "machine_max_jerk_z": [
+      "2",
+      "2"
+    ],
+    "max_layer_height": [
+      "0.48"
+    ],
+    "min_layer_height": [
+      "0.12"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+      "2"
+    ],
+    "retract_before_wipe": [
+      "70%"
+    ],
+    "retraction_length": [
+      "0.8"
+    ],
+    "retract_length_toolchange": [
+      "2"
+    ],
+    "retraction_speed": [
+      "30"
+    ],
+    "deretraction_speed": [
+      "40"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+      "Creality Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
+    "scan_first_layer": "0",
+    "thumbnails": [
+      "96x96",
+      "300x300"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.8 nozzle.json
new file mode 100644
index 0000000..71fa0f5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.8 nozzle.json	
@@ -0,0 +1,128 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality CR-10 SE 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality CR-10 SE",
+    "printer_variant": "0.8",
+    "printer_structure": "i3",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.8",
+    "nozzle_diameter": [
+      "0.8"
+    ],
+    "printable_area": [
+      "0x0",
+      "220x0",
+      "220x220",
+      "0x220"
+    ],
+    "printable_height": "265",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_radius": "65",
+    "nozzle_type": "hardened_steel",
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "8000",
+      "8000"
+    ],
+    "machine_max_acceleration_y": [
+      "8000",
+      "8000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_speed_e": [
+      "100",
+      "100"
+    ],
+    "machine_max_speed_x": [
+      "600",
+      "600"
+    ],
+    "machine_max_speed_y": [
+      "600",
+      "600"
+    ],
+    "machine_max_speed_z": [
+      "30",
+      "30"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "10",
+      "10"
+    ],
+    "machine_max_jerk_y": [
+      "10",
+      "10"
+    ],
+    "machine_max_jerk_z": [
+      "2",
+      "2"
+    ],
+    "max_layer_height": [
+      "0.64"
+    ],
+    "min_layer_height": [
+      "0.16"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+      "2"
+    ],
+    "retract_before_wipe": [
+      "70%"
+    ],
+    "retraction_length": [
+      "0.8"
+    ],
+    "retract_length_toolchange": [
+      "2"
+    ],
+    "retraction_speed": [
+      "30"
+    ],
+    "deretraction_speed": [
+      "40"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+      "Creality Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
+    "scan_first_layer": "0",
+    "thumbnails": [
+      "96x96",
+      "300x300"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 SE.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE.json
new file mode 100644
index 0000000..842d0da
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 SE.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality CR-10 SE",
+    "model_id": "Creality-CR-10SE",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_cr10se_buildplate_model.stl",
+    "bed_texture": "creality_cr10se_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 V2 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
new file mode 100644
index 0000000..85e5ff8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 V2 0.4 nozzle.json	
@@ -0,0 +1,110 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality CR-10 V2 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality CR-10 V2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality CR10V2",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "400",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-10 V2.json b/OrcaSlicer/system/Creality/machine/Creality CR-10 V2.json
new file mode 100644
index 0000000..1fde243
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-10 V2.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality CR-10 V2",
+    "model_id": "Creality-CR10-V2",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_cr10v2_buildplate_model.stl",
+    "bed_texture": "creality_cr10v2_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.2 nozzle.json
new file mode 100644
index 0000000..9d43551
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.2 nozzle.json	
@@ -0,0 +1,27 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-6 Max 0.2 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-6 Max",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.2",
+  "default_print_profile": "0.16mm Opitmal @Creality CR-6 0.2",
+  "nozzle_diameter": [
+    "0.2"
+  ],
+  "printable_area": [
+    "5x5",
+    "395x5",
+    "395x395",
+    "5x395"
+  ],
+  "printable_height": "400",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.4 nozzle.json
new file mode 100644
index 0000000..c726a9b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.4 nozzle.json	
@@ -0,0 +1,26 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-6 Max 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-6 Max",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality CR-6 0.4",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_area": [
+    "5x5",
+    "395x5",
+    "395x395",
+    "5x395"
+  ],
+  "printable_height": "400",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.6 nozzle.json
new file mode 100644
index 0000000..5d70115
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.6 nozzle.json	
@@ -0,0 +1,27 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-6 Max 0.6 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-6 Max",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.6",
+  "default_print_profile": "0.20mm Standard @Creality CR-6 0.6",
+  "nozzle_diameter": [
+    "0.6"
+  ],
+  "printable_area": [
+    "5x5",
+    "395x5",
+    "395x395",
+    "5x395"
+  ],
+  "printable_height": "400",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.8 nozzle.json
new file mode 100644
index 0000000..ec44372
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.8 nozzle.json	
@@ -0,0 +1,27 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-6 Max 0.8 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-6 Max",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+    "printer_variant": "0.8",
+    "default_print_profile": "0.32mm Standard @Creality CR-6 0.8",
+    "nozzle_diameter": [
+    "0.8"
+  ],
+  "printable_area": [
+   "5x5",
+    "395x5",
+    "395x395",
+    "5x395"
+  ],
+  "printable_height": "400",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 Max.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max.json
new file mode 100644
index 0000000..2f9ec6c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 Max.json	
@@ -0,0 +1,11 @@
+{
+    "type": "machine_model",
+    "name": "Creality CR-6 Max",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "bed_texture": "creality_cr6se_buildplate_texture.png",
+    "family": "Creality",
+    "hotend_model": "",
+    "machine_tech": "FFF",
+    "model_id": "Creality_CR_6_Max",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.2 nozzle.json
new file mode 100644
index 0000000..735a4d4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.2 nozzle.json	
@@ -0,0 +1,27 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-6 SE 0.2 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-6 SE",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.2",
+  "default_print_profile": "0.16mm Opitmal @Creality CR-6 0.2",
+  "nozzle_diameter": [
+    "0.2"
+  ],
+  "printable_area": [
+    "5x0",
+    "230x0",
+    "230x235",
+    "5x235"
+  ],
+  "printable_height": "250",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.4 nozzle.json
new file mode 100644
index 0000000..cb835d9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.4 nozzle.json	
@@ -0,0 +1,26 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-6 SE 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-6 SE",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality CR-6 0.4",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_area": [
+    "5x0",
+    "230x0",
+    "230x235",
+    "5x235"
+  ],
+  "printable_height": "250",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.6 nozzle.json
new file mode 100644
index 0000000..dd8888c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.6 nozzle.json	
@@ -0,0 +1,27 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-6 SE 0.6 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-6 SE",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.6",
+  "default_print_profile": "0.20mm Standard @Creality CR-6 0.6",
+  "nozzle_diameter": [
+    "0.6"
+  ],
+  "printable_area": [
+   "5x0",
+    "230x0",
+    "230x235",
+    "5x235"
+  ],
+  "printable_height": "250",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.8 nozzle.json
new file mode 100644
index 0000000..ef2aa08
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.8 nozzle.json	
@@ -0,0 +1,27 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-6 SE 0.8 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-6 SE",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.8",
+  "default_print_profile": "0.32mm Standard @Creality CR-6 0.8",
+  "nozzle_diameter": [
+    "0.8"
+  ],
+  "printable_area": [
+   "5x0",
+    "230x0",
+    "230x235",
+    "5x235"
+  ],
+  "printable_height": "250",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-6 SE.json b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE.json
new file mode 100644
index 0000000..219dc01
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-6 SE.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality CR-6 SE",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "bed_model": "creality_cr6se_buildplate_model.stl",
+    "bed_texture": "creality_cr6se_buildplate_texture.png",
+    "family": "Creality",
+    "hotend_model": "",
+    "machine_tech": "FFF",
+    "model_id": "Creality_CR_6_SE",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-M4 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality CR-M4 0.4 nozzle.json
new file mode 100644
index 0000000..97db7bb
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-M4 0.4 nozzle.json	
@@ -0,0 +1,58 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-M4 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-M4",
+  "gcode_flavor": "marlin",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality CR-M4",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_height": "470",
+  "printable_area": [
+    "0x0",
+    "450x0",
+    "450x450",
+    "0x450"
+  ],
+  "machine_max_speed_e": [
+    "50",
+    "50"
+  ],
+  "machine_max_acceleration_z": [
+    "100",
+    "100"
+  ],
+  "machine_max_acceleration_extruding": [
+    "700",
+    "700"
+  ],
+  "machine_max_jerk_x": [
+    "10",
+    "10"
+  ],
+  "machine_max_jerk_y": [
+    "10",
+    "10"
+  ],
+  "retraction_minimum_travel": [
+    "0.8"
+  ],
+  "retraction_length": [
+    "0.8"
+  ],
+  "retraction_speed": [
+    "40"
+  ],
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0",
+  "machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+  "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality CR-M4.json b/OrcaSlicer/system/Creality/machine/Creality CR-M4.json
new file mode 100644
index 0000000..889591f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality CR-M4.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality CR-M4",
+    "model_id": "Creality-CR-M4",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_crm4_buildplate_model.stl",
+    "bed_texture": "creality_crm4_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.2 nozzle.json
new file mode 100644
index 0000000..020a234
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.2 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3",
+	"printer_variant": "0.2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 0.2",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.16"
+	],
+	"min_layer_height": [
+		"0.04"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.4 nozzle.json
new file mode 100644
index 0000000..2273fec
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.4 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3",
+	"printer_variant": "0.4",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.6 nozzle.json
new file mode 100644
index 0000000..3ca555c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.6 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3",
+	"printer_variant": "0.6",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 0.6",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.48"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.8 nozzle.json
new file mode 100644
index 0000000..1f6e3c3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.8 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3",
+	"printer_variant": "0.8",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 0.8",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.64"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json
new file mode 100644
index 0000000..bef8c38
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 Pro 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 Pro",
+	"printer_variant": "0.2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.2",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.16"
+	],
+	"min_layer_height": [
+		"0.04"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json
new file mode 100644
index 0000000..50d89f5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 Pro 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 Pro",
+	"printer_variant": "0.4",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.4",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json
new file mode 100644
index 0000000..268a063
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 Pro 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 Pro",
+	"printer_variant": "0.6",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.6",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.48"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json
new file mode 100644
index 0000000..b49092d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 Pro 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 Pro",
+	"printer_variant": "0.8",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.8",
+	"thumbnails": [""],
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_height_to_lid": "25",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.64"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro.json
new file mode 100644
index 0000000..6df373e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 Pro",
+    "model_id": "Creality-Ender3-Pro",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v2_buildplate_model.stl",
+    "bed_texture": "creality_ender3v2_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
new file mode 100644
index 0000000..695d7d6
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json	
@@ -0,0 +1,110 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "270",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json
new file mode 100644
index 0000000..b8fc2bc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Plus 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Plus",
+	"printer_variant": "0.2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.2",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.16"
+	],
+	"min_layer_height": [
+		"0.04"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"45"
+	],
+	"deretraction_speed": [
+		"45"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling \nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..1743f74
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Plus 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Plus",
+	"printer_variant": "0.4",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"45"
+	],
+	"deretraction_speed": [
+		"45"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json
new file mode 100644
index 0000000..f774ae2
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json	
@@ -0,0 +1,114 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Plus 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Plus",
+	"printer_variant": "0.6",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.6",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.48"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"45"
+	],
+	"deretraction_speed": [
+		"45"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json
new file mode 100644
index 0000000..bd4add3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json	
@@ -0,0 +1,115 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Plus 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Plus",
+	"printer_variant": "0.8",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.8",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"bed_shape": "rectangular",
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.64"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.4"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"45"
+	],
+	"deretraction_speed": [
+		"45"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus.json
new file mode 100644
index 0000000..4f1b3b5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 S1 Plus",
+    "model_id": "Creality-Ender3-S1-Plus",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3s1plus_buildplate_model.stl",
+    "bed_texture": "creality_ender3s1plus_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
new file mode 100644
index 0000000..d6a3a5f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json	
@@ -0,0 +1,113 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-3 S1 Pro 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 S1 Pro",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3S1Pro",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "270",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.36"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro.json
new file mode 100644
index 0000000..d536c16
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 S1 Pro",
+    "model_id": "Creality-Ender3-S1-Pro",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3s1pro_buildplate_model.stl",
+    "bed_texture": "creality_ender3s1pro_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1.json
new file mode 100644
index 0000000..9b928a5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 S1",
+    "model_id": "Creality-Ender3-S1",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3s1_buildplate_model.stl",
+    "bed_texture": "creality_ender3s1_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json
new file mode 100644
index 0000000..e36e3bf
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json	
@@ -0,0 +1,25 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-3 V2 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-3 V2",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality Ender3V2",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "250",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json
new file mode 100644
index 0000000..f62fdb5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json	
@@ -0,0 +1,88 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-3 V2 Neo 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-3 V2 Neo",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality Ender3V2 Neo",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "250",
+  "nozzle_type": "brass",
+  "auxiliary_fan": "0",
+  "machine_max_acceleration_extruding": [
+      "5000",
+      "5000"
+  ],
+  "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+  ],
+  "machine_max_acceleration_travel": [
+      "500",
+      "500"
+  ],
+  "machine_max_acceleration_x": [
+      "500",
+      "500"
+  ],
+  "machine_max_acceleration_y": [
+      "500",
+      "500"
+  ],
+  "machine_max_acceleration_z": [
+      "100",
+      "100"
+  ],
+  "machine_max_speed_e": [
+      "50",
+      "50"
+  ],
+  "machine_max_speed_x": [
+      "500",
+      "500"
+  ],
+  "machine_max_speed_y": [
+      "500",
+      "500"
+  ],
+  "machine_max_speed_z": [
+      "10",
+      "10"
+  ],
+  "machine_max_jerk_e": [
+      "5",
+      "5"
+  ],
+  "machine_max_jerk_x": [
+      "10",
+      "10"
+  ],
+  "machine_max_jerk_y": [
+      "10",
+      "10"
+  ],
+  "machine_max_jerk_z": [
+      "0.4",
+      "0.4"
+  ],
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp\n\nG28 ;Home\nG29 ;Auto bed leveling (create mesh if not already stored)\nM420 S1 ;Enable mesh leveling\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
+  "thumbnails_format": "JPG",
+  "thumbnails": [
+    "200x200"
+  ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo.json
new file mode 100644
index 0000000..dc58b44
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 V2 Neo",
+    "model_id": "Creality_Ender_3_V2_Neo",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v2neo_buildplate_model.stl",
+    "bed_texture": "creality_ender3v2neo_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PLA;Creality Generic PETG"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2.json
new file mode 100644
index 0000000..d16e301
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 V2",
+    "model_id": "Creality_Ender_3_V2",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v2_buildplate_model.stl",
+    "bed_texture": "creality_ender3v2_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json
new file mode 100644
index 0000000..4edd30d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json	
@@ -0,0 +1,137 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality Ender-3 V3 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality Ender-3 V3",
+    "gcode_flavor": "klipper",
+	"printer_structure": "i3",
+    "default_print_profile": "0.20mm Standard @Creality Ender3 V3",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "0",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "6000",
+        "6000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_z": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "600",
+        "600"
+    ],
+    "machine_max_speed_y": [
+        "600",
+        "600"
+    ],
+    "machine_max_speed_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_jerk_e": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_z": [
+        "20",
+        "20"
+    ],
+    "max_layer_height": [
+        "0.35"
+    ],
+    "min_layer_height": [
+        "0.1"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "250",
+    "extruder_clearance_height_to_rod": "14",
+    "extruder_clearance_radius": "70",
+    "z_hop": [
+        "0.2"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality Generic PLA @Ender-3V3-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "96x96/PNG, 300x300/PNG"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json
new file mode 100644
index 0000000..3e15a76
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json	
@@ -0,0 +1,137 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality Ender-3 V3 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality Ender-3 V3",
+    "gcode_flavor": "klipper",
+	"printer_structure": "i3",
+    "default_print_profile": "0.30mm Standard @Creality Ender3 V3",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "0",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "6000",
+        "6000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_z": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "600",
+        "600"
+    ],
+    "machine_max_speed_y": [
+        "600",
+        "600"
+    ],
+    "machine_max_speed_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_jerk_e": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_z": [
+        "20",
+        "20"
+    ],
+    "max_layer_height": [
+        "0.35"
+    ],
+    "min_layer_height": [
+        "0.1"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "250",
+    "extruder_clearance_height_to_rod": "14",
+    "extruder_clearance_radius": "70",
+    "z_hop": [
+        "0.2"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality Generic PLA @Ender-3V3-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "96x96/PNG, 300x300/PNG"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json
new file mode 100644
index 0000000..687145d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
@@ -0,0 +1,129 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"printer_settings_id": "Creality",
+	"name": "Creality Ender-3 V3 KE 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 V3 KE",
+	"gcode_flavor": "klipper",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3V3KE",
+	"extruder_clearance_height_to_rod": "47",
+    	"extruder_clearance_max_radius": "90",
+    	"extruder_clearance_radius": "90",
+   	"machine_load_filament_time": "11",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "245",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"8000",
+		"8000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"8000",
+		"8000"
+	],
+	"machine_max_acceleration_x": [
+		"8000",
+		"8000"
+	],
+	"machine_max_acceleration_y": [
+		"8000",
+		"8000"
+	],
+	"machine_max_acceleration_z": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_e": [
+		"40",
+		"40"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"30",
+		"30"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"7",
+		"7"
+	],
+	"machine_max_jerk_y": [
+		"7",
+		"7"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"100%"
+	],
+	"retraction_length": [
+		"0.5"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"deretraction_speed": [
+		"0"
+	],
+	"z_hop": [
+		"0.2"
+	],
+	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
+	"default_filament_profile": [
+		"Creality Generic PLA @Ender-3V3-all"
+	],
+	"machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE.json
new file mode 100644
index 0000000..8650ce5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 V3 KE",
+    "model_id": "Creality-Ender3-V3-KE",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v3ke_buildplate_model.stl",
+    "bed_texture": "creality_ender3v3ke_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..c3f9026
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality Ender-3 V3 Plus 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality Ender-3 V3 Plus",
+    "gcode_flavor": "klipper",
+	"printer_structure": "i3",
+    "default_print_profile": "0.20mm Standard @Creality Ender3 V3 Plus",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "330",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "0",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "30"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.12"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality Generic PLA @Ender-3V3-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json
new file mode 100644
index 0000000..36e6dad
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality Ender-3 V3 Plus 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality Ender-3 V3 Plus",
+    "gcode_flavor": "klipper",
+	"printer_structure": "i3",
+    "default_print_profile": "0.30mm Standard @Creality Ender3 V3 Plus",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "330",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "0",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "30"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.12"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality Generic PLA @Ender-3V3-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus.json
new file mode 100644
index 0000000..a00cd79
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 V3 Plus",
+    "model_id": "Creality-Ender3-V3-Plus",
+    "nozzle_diameter": "0.4;0.6",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v3plus_buildplate_model.stl",
+    "bed_texture": "creality_ender3v3plus_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json
new file mode 100644
index 0000000..5168f2d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json	
@@ -0,0 +1,126 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"printer_settings_id": "Creality",
+	"name": "Creality Ender-3 V3 SE 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 V3 SE",
+	"printer_variant": "0.2",
+	"gcode_flavor": "marlin2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.2",
+	"extruder_clearance_height_to_rod": "47",
+    "extruder_clearance_max_radius": "90",
+    "extruder_clearance_radius": "90",
+    "machine_load_filament_time": "11",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_retracting": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_travel": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_x": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_y": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_e": [
+		"40",
+		"40"
+	],
+	"machine_max_speed_x": [
+		"250",
+		"250"
+	],
+	"machine_max_speed_y": [
+		"250",
+		"250"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.16"
+	],
+	"min_layer_height": [
+		"0.04"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1.2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"z_hop_types": [
+		"Spiral Lift"
+	],
+	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA @Ender-3V3-all"
+	],
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+	"scan_first_layer": "0",
+	"disable_m73": "1",
+	"thumbnails": [
+	]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json
new file mode 100644
index 0000000..2bdb35a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json	
@@ -0,0 +1,126 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"printer_settings_id": "Creality",
+	"name": "Creality Ender-3 V3 SE 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 V3 SE",
+	"printer_variant": "0.4",
+	"gcode_flavor": "marlin2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.4",
+	"extruder_clearance_height_to_rod": "47",
+    "extruder_clearance_max_radius": "90",
+    "extruder_clearance_radius": "90",
+    "machine_load_filament_time": "11",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_retracting": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_travel": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_x": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_y": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_e": [
+		"40",
+		"40"
+	],
+	"machine_max_speed_x": [
+		"250",
+		"250"
+	],
+	"machine_max_speed_y": [
+		"250",
+		"250"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1.2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"z_hop_types": [
+		"Spiral Lift"
+	],
+	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA @Ender-3V3-all"
+	],
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+	"scan_first_layer": "0",
+	"disable_m73": "1",
+	"thumbnails": [
+	]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json
new file mode 100644
index 0000000..5be6ec8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json	
@@ -0,0 +1,126 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"printer_settings_id": "Creality",
+	"name": "Creality Ender-3 V3 SE 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 V3 SE",
+	"printer_variant": "0.6",
+	"gcode_flavor": "marlin2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.6",
+	"extruder_clearance_height_to_rod": "47",
+    "extruder_clearance_max_radius": "90",
+    "extruder_clearance_radius": "90",
+    "machine_load_filament_time": "11",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_retracting": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_travel": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_x": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_y": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_e": [
+		"40",
+		"40"
+	],
+	"machine_max_speed_x": [
+		"250",
+		"250"
+	],
+	"machine_max_speed_y": [
+		"250",
+		"250"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.48"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1.2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"z_hop_types": [
+		"Spiral Lift"
+	],
+	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA @Ender-3V3-all"
+	],
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+	"scan_first_layer": "0",
+	"disable_m73": "1",
+	"thumbnails": [
+	]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json
new file mode 100644
index 0000000..fc88a58
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json	
@@ -0,0 +1,126 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"printer_settings_id": "Creality",
+	"name": "Creality Ender-3 V3 SE 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-3 V3 SE",
+	"printer_variant": "0.8",
+	"gcode_flavor": "marlin2",
+	"printer_structure": "i3",
+	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.8",
+	"extruder_clearance_height_to_rod": "47",
+    "extruder_clearance_max_radius": "90",
+    "extruder_clearance_radius": "90",
+    "machine_load_filament_time": "11",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "250",
+	"nozzle_type": "brass",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_retracting": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_travel": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_x": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_y": [
+		"2500",
+		"2500"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_e": [
+		"40",
+		"40"
+	],
+	"machine_max_speed_x": [
+		"250",
+		"250"
+	],
+	"machine_max_speed_y": [
+		"250",
+		"250"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.64"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1.2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"z_hop_types": [
+		"Spiral Lift"
+	],
+	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA @Ender-3V3-all"
+	],
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+	"scan_first_layer": "0",
+	"disable_m73": "1",
+	"thumbnails": [
+	]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE.json
new file mode 100644
index 0000000..e57336a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 V3 SE",
+    "model_id": "Creality-Ender3-V3-SE",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v3se_buildplate_model.stl",
+    "bed_texture": "creality_ender3v3se_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3.json
new file mode 100644
index 0000000..fc5eb11
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3 V3",
+    "model_id": "Creality-Ender3-V3",
+    "nozzle_diameter": "0.4;0.6",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v3_buildplate_model.stl",
+    "bed_texture": "creality_ender3v3_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-3.json b/OrcaSlicer/system/Creality/machine/Creality Ender-3.json
new file mode 100644
index 0000000..5c06160
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-3.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-3",
+    "model_id": "Creality-Ender3",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender3v2_buildplate_model.stl",
+    "bed_texture": "creality_ender3v2_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 0.4 nozzle.json
new file mode 100644
index 0000000..393659d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 0.4 nozzle.json	
@@ -0,0 +1,109 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-5 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-5",
+	"default_print_profile": "0.20mm Standard @Creality Ender5",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json
new file mode 100644
index 0000000..2ae38b1
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json	
@@ -0,0 +1,112 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-5 Max 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-5 Max",
+    "gcode_flavor": "klipper",
+    "printer_structure": "i3",
+    "auxiliary_fan": "0",
+    "bbl_use_printhost": "0",
+    "bed_exclude_area": "0x0",
+    "bed_mesh_max": "99999,99999",
+    "bed_mesh_min": "-99999,-99999",
+    "bed_mesh_probe_distance": "50,50",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "best_object_pos": "0.5,0.5",
+    "change_filament_gcode": "PAUSE",
+    "cooling_tube_length": "0",
+    "cooling_tube_retraction": "0",
+    "creality_flush_time": "86.0",
+    "default_print_profile": "0.2mm Standard @Creality Ender-5 Max 0.4 nozzle",
+    "disable_m73": "0",
+    "emit_machine_limits_to_gcode": "1",
+    "enable_filament_ramming": "1",
+    "extra_loading_move": "0",
+    "extruder_clearance_height_to_lid": "120",
+    "extruder_clearance_height_to_rod": "35",
+    "extruder_clearance_radius": "85",
+    "fan_kickstart": "0",
+    "fan_speedup_overhangs": "1",
+    "fan_speedup_time": "0",
+    "high_current_on_filament_swap": "0",
+    "host_type": "octoprint",
+    "machine_LED_light_exist": "1",
+    "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+    "machine_load_filament_time": "11",
+    "machine_max_acceleration_e": "30000",
+    "machine_max_acceleration_extruding": "50000",
+    "machine_max_acceleration_retracting": "50000",
+    "machine_max_acceleration_travel": "50000",
+    "machine_max_acceleration_x": "50000",
+    "machine_max_acceleration_y": "50000",
+    "machine_max_acceleration_z": "1000",
+    "machine_max_jerk_e": "100",
+    "machine_max_jerk_x": "100",
+    "machine_max_jerk_y": "100",
+    "machine_max_jerk_z": "0.4",
+    "machine_max_speed_e": "1000",
+    "machine_max_speed_x": "1000",
+    "machine_max_speed_y": "1000",
+    "machine_max_speed_z": "30",
+    "machine_min_extruding_rate": "0,0",
+    "machine_min_travel_rate": "0,0",
+    "machine_pause_gcode": "PAUSE",
+    "machine_platform_motion_enable": "0",
+    "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X-1.0 Y120 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X-1.0 Y245.0 Z0.28 F1500.0 E7 ;Draw the first line \nG1 X-0.6 Y245.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-0.6 Y120 Z0.28 F1500.0 E15 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_unload_filament_time": "0",
+    "manual_filament_change": "1",
+    "nozzle_hrc": "0",
+    "nozzle_type": "brass",
+    "nozzle_volume": "0",
+    "parking_pos_retraction": "0",
+    "preferred_orientation": "0",
+    "prime_tower_position_type": "Middle Upper",
+    "printable_area": "0x0,400x0,400x400,0x400",
+    "printable_height": "400",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "printhost_authorization_type": "key",
+    "printhost_ssl_ignore_revoke": "0",
+    "purge_in_prime_tower": "1",
+    "scan_first_layer": "0",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "support_air_filtration": "0",
+    "support_chamber_temp_control": "0",
+    "support_multi_bed_types": "1",
+    "thumbnails": "96x96,300x300",
+    "thumbnails_format": "PNG",
+    "time_cost": "0",
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "1",
+    "z_offset": "0",
+    "default_filament_profile": [
+        "Creality Hyper PLA @Ender-5Max-all"
+    ],
+    "deretraction_speed": "50",
+    "extruder_colour": "#FCE94F",
+    "extruder_offset": "0x0",
+    "max_layer_height": "0.36",
+    "min_layer_height": "0.08",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "retract_before_wipe": "100",
+    "retract_length_toolchange": "0",
+    "retract_lift_above": "0",
+    "retract_lift_below": "399",
+    "retract_lift_enforce": "All Surfaces",
+    "retract_restart_extra": "0",
+    "retract_restart_extra_toolchange": "0",
+    "retract_when_changing_layer": "1",
+    "retraction_length": "0.8",
+    "retraction_minimum_travel": "0.5",
+    "retraction_speed": "50",
+    "wipe": "1",
+    "wipe_distance": "1",
+    "z_hop": "0.4",
+    "z_hop_types": "Slope Lift"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max.json
new file mode 100644
index 0000000..124410f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-5 Max",
+    "model_id": "Creality-Ender5-Max",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender5max_buildplate_model.stl",
+    "bed_texture": "creality_ender5max_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Creality Generic TPU @Ender-5Max-all;Creality Generic ASA @Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Creality Generic PLA @Ender-5Max-all;Creality Generic PETG @Ender-5Max-all;Creality Generic ABS @Ender-5Max-all;Creality Generic PA @Ender-5Max-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..0b10142
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json	
@@ -0,0 +1,112 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-5 Plus 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-5 Plus",
+	"default_print_profile": "0.20mm Standard @Creality Ender5Plus",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "400",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+    "machine_max_acceleration_e": [
+        "1000"
+    ],
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus.json
new file mode 100644
index 0000000..dc9b343
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-5 Plus",
+    "model_id": "Creality-Ender5-Plus",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender5plus_buildplate_model.stl",
+    "bed_texture": "creality_ender5plus_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json
new file mode 100644
index 0000000..02ec45a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json	
@@ -0,0 +1,32 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-5 Pro (2019) 0.2 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-5 Pro (2019)",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.2",
+  "default_print_profile": "0.16mm Optimal @Creality Ender5Pro (2019) 0.2",
+  "max_layer_height": [
+    "0.16"
+  ],
+  "min_layer_height": [
+    "0.05"
+  ],
+  "nozzle_diameter": [
+    "0.2"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "300",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json
new file mode 100644
index 0000000..7afcba3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json	
@@ -0,0 +1,32 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-5 Pro (2019) 0.25 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-5 Pro (2019)",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.25",
+  "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.25",
+  "max_layer_height": [
+    "0.2"
+  ],
+  "min_layer_height": [
+    "0.06"
+  ],
+  "nozzle_diameter": [
+    "0.25"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "300",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json
new file mode 100644
index 0000000..88ad511
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json	
@@ -0,0 +1,32 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-5 Pro (2019) 0.3 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-5 Pro (2019)",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.3",
+  "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.3",
+  "max_layer_height": [
+    "0.24"
+  ],
+  "min_layer_height": [
+    "0.08"
+  ],
+  "nozzle_diameter": [
+    "0.3"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "300",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json
new file mode 100644
index 0000000..fe029ae
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json	
@@ -0,0 +1,25 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-5 Pro (2019) 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-5 Pro (2019)",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019)",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "300",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json
new file mode 100644
index 0000000..0990664
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json	
@@ -0,0 +1,32 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-5 Pro (2019) 0.5 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-5 Pro (2019)",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.5",
+  "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.5",
+  "max_layer_height": [
+    "0.4"
+  ],
+  "min_layer_height": [
+    "0.12"
+  ],
+  "nozzle_diameter": [
+    "0.5"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "300",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json
new file mode 100644
index 0000000..1956e96
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json	
@@ -0,0 +1,32 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-5 Pro (2019) 0.6 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-5 Pro (2019)",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.6",
+  "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.6",
+  "max_layer_height": [
+    "0.48"
+  ],
+  "min_layer_height": [
+    "0.16"
+  ],
+  "nozzle_diameter": [
+    "0.6"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "300",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json
new file mode 100644
index 0000000..2191dbd
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json	
@@ -0,0 +1,32 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-5 Pro (2019) 0.8 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-5 Pro (2019)",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "0.8",
+  "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.8",
+  "max_layer_height": [
+    "0.64"
+  ],
+  "min_layer_height": [
+    "0.2"
+  ],
+  "nozzle_diameter": [
+    "0.8"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "300",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json
new file mode 100644
index 0000000..5b9d7f1
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json	
@@ -0,0 +1,32 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Ender-5 Pro (2019) 1.0 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Ender-5 Pro (2019)",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "printer_variant": "1.0",
+  "default_print_profile": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0",
+  "max_layer_height": [
+    "0.80"
+  ],
+  "min_layer_height": [
+    "0.25"
+  ],
+  "nozzle_diameter": [
+    "1.0"
+  ],
+  "printable_area": [
+    "0x0",
+    "220x0",
+    "220x220",
+    "0x220"
+  ],
+  "printable_height": "300",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019).json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019).json
new file mode 100644
index 0000000..3f71b5f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019).json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-5 Pro (2019)",
+    "model_id": "Creality_Ender_5_Pro_2019",
+    "nozzle_diameter": "0.2;0.25;0.3;0.4;0.5;0.6;0.8;1.0",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender5pro_buildplate_model.stl",
+    "bed_texture": "creality_ender5pro_buildplate_texture.png",
+    "hotend_model": "hotend.stl",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
new file mode 100644
index 0000000..84f23c9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json	
@@ -0,0 +1,109 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-5 S1 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-5 S1",
+	"default_print_profile": "0.20mm Standard @Creality Ender5S1",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1.json
new file mode 100644
index 0000000..32df7c2
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-5 S1",
+    "model_id": "Creality-Ender5-S1",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender5s1_buildplate_model.stl",
+    "bed_texture": "creality_ender5s1_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5.json
new file mode 100644
index 0000000..3d8f145
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-5",
+    "model_id": "Creality-Ender5",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender5_buildplate_model.stl",
+    "bed_texture": "creality_ender5_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5S 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5S 0.4 nozzle.json
new file mode 100644
index 0000000..79c73d5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5S 0.4 nozzle.json	
@@ -0,0 +1,109 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-5S 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-5S",
+	"default_print_profile": "0.20mm Standard @Creality Ender5S",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"220x0",
+		"220x220",
+		"0x220"
+	],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"2"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-5S.json b/OrcaSlicer/system/Creality/machine/Creality Ender-5S.json
new file mode 100644
index 0000000..a118314
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-5S.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-5S",
+    "model_id": "Creality-Ender5S",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender5s_buildplate_model.stl",
+    "bed_texture": "creality_ender5s_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-6 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Ender-6 0.4 nozzle.json
new file mode 100644
index 0000000..6fe8d0f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-6 0.4 nozzle.json	
@@ -0,0 +1,109 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Creality Ender-6 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_creality_common",
+	"printer_model": "Creality Ender-6",
+	"default_print_profile": "0.20mm Standard @Creality Ender6",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"250x0",
+		"250x250",
+		"0x250"
+	],
+	"printable_height": "400",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1250"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8",
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Creality",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"5"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "M0",
+	"default_filament_profile": [
+		"Creality Generic PLA"
+	],
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"scan_first_layer": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Ender-6.json b/OrcaSlicer/system/Creality/machine/Creality Ender-6.json
new file mode 100644
index 0000000..73a5637
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Ender-6.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality Ender-6",
+    "model_id": "Creality-Ender6",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_ender6_buildplate_model.stl",
+    "bed_texture": "creality_ender6_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Hi 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Hi 0.4 nozzle.json
new file mode 100644
index 0000000..bbe1418
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Hi 0.4 nozzle.json	
@@ -0,0 +1,145 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality Hi 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality Hi",
+    "gcode_flavor": "klipper",
+    "printer_structure": "i3",
+    "default_print_profile": "0.20mm Standard @Creality Hi",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "260x0",
+        "260x260",
+        "0x260"
+    ],
+    "printable_height": "300",
+    "auxiliary_fan": "0",
+    "support_air_filtration": "0",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "12000",
+        "12000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "12000",
+        "12000"
+    ],
+    "machine_max_acceleration_x": [
+        "12000",
+        "12000"
+    ],
+    "machine_max_acceleration_y": [
+        "12000",
+        "12000"
+    ],
+    "machine_max_acceleration_z": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_speed_e": [
+        "50",
+        "50"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "30"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "purge_in_prime_tower": "0",
+    "retraction_minimum_travel": [
+        "0.5"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "retract_lift_below": [
+        "299"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "enable_filament_ramming": "0",
+    "extruder_clearance_height_to_lid": "301",
+    "extruder_clearance_height_to_rod": "27",
+    "extruder_clearance_radius": "55",
+    "z_hop": [
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "machine_pause_gcode": "PAUSE",
+    "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600",
+    "default_filament_profile": [
+        "Creality Generic PLA @Hi-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "96x96/PNG, 300x300/PNG"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Hi 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Hi 0.6 nozzle.json
new file mode 100644
index 0000000..4540512
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Hi 0.6 nozzle.json	
@@ -0,0 +1,145 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality Hi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality Hi",
+    "gcode_flavor": "klipper",
+	"printer_structure": "i3",
+    "default_print_profile": "0.30mm Standard @Creality Hi",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "260x0",
+        "260x260",
+        "0x260"
+    ],
+    "printable_height": "300",
+    "auxiliary_fan": "0",
+    "support_air_filtration": "0",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "12000",
+        "12000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "12000",
+        "12000"
+    ],
+    "machine_max_acceleration_x": [
+        "12000",
+        "12000"
+    ],
+    "machine_max_acceleration_y": [
+        "12000",
+        "12000"
+    ],
+    "machine_max_acceleration_z": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_speed_e": [
+        "50",
+        "50"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "30"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.35"
+    ],
+    "min_layer_height": [
+        "0.1"
+    ],
+    "printer_settings_id": "Creality",
+    "purge_in_prime_tower": "0",
+    "retraction_minimum_travel": [
+        "0.5"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "retract_lift_below": [
+        "299"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "enable_filament_ramming": "0",
+    "extruder_clearance_height_to_lid": "301",
+    "extruder_clearance_height_to_rod": "27",
+    "extruder_clearance_radius": "55",
+    "z_hop": [
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "machine_pause_gcode": "PAUSE",
+    "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600",
+    "default_filament_profile": [
+        "Creality Generic PLA @Hi-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "96x96/PNG, 300x300/PNG"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Hi.json b/OrcaSlicer/system/Creality/machine/Creality Hi.json
new file mode 100644
index 0000000..73fce0e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Hi.json	
@@ -0,0 +1,13 @@
+{
+    "type": "machine_model",
+    "name": "Creality Hi",
+    "model_id": "Creality-Hi",
+    "nozzle_diameter": "0.4;0.6",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_hi_buildplate_model.stl",
+    "bed_texture": "creality_hi_buildplate_texture.png",
+    "default_bed_type": "Textured PEI Plate",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS @Hi-all;Creality Generic ASA @Hi-all;Creality Generic ASA-CF @Hi-all;Creality Generic PETG @Hi-all;Creality Generic PETG-CF @Hi-all;Creality Generic PLA @Hi-all;Creality Generic PLA High Speed @Hi-all;Creality Generic PLA Matte @Hi-all;Creality Generic PLA Silk @Hi-all;Creality Generic PLA-CF @Hi-all;Creality Generic PLA Wood @Hi-all;Creality Generic TPU @Hi-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 (0.4 nozzle).json b/OrcaSlicer/system/Creality/machine/Creality K1 (0.4 nozzle).json
new file mode 100644
index 0000000..707fb25
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 (0.4 nozzle).json	
@@ -0,0 +1,133 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 (0.4 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality K1 (0.4 nozzle)",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "brass",
+    "auxiliary_fan": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 (0.6 nozzle).json b/OrcaSlicer/system/Creality/machine/Creality K1 (0.6 nozzle).json
new file mode 100644
index 0000000..f5b4464
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 (0.6 nozzle).json	
@@ -0,0 +1,133 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 (0.6 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.30mm Standard @Creality K1 (0.6 nozzle)",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "brass",
+    "auxiliary_fan": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.4"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 (0.8 nozzle).json b/OrcaSlicer/system/Creality/machine/Creality K1 (0.8 nozzle).json
new file mode 100644
index 0000000..0a15d1d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 (0.8 nozzle).json	
@@ -0,0 +1,133 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 (0.8 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.40mm Standard @Creality K1 (0.8 nozzle)",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "brass",
+    "auxiliary_fan": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.5"
+    ],
+    "min_layer_height": [
+        "0.16"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.4 nozzle).json b/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.4 nozzle).json
new file mode 100644
index 0000000..bb772a0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.4 nozzle).json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 Max (0.4 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1 Max",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "300",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.6 nozzle).json b/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.6 nozzle).json
new file mode 100644
index 0000000..d19a20a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.6 nozzle).json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 Max (0.6 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1 Max",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "300",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.4"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.8 nozzle).json b/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.8 nozzle).json
new file mode 100644
index 0000000..c752032
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.8 nozzle).json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 Max (0.8 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1 Max",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "300",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.5"
+    ],
+    "min_layer_height": [
+        "0.16"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 Max.json b/OrcaSlicer/system/Creality/machine/Creality K1 Max.json
new file mode 100644
index 0000000..10df2e7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 Max.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality K1 Max",
+    "model_id": "Creality-K1-Max",
+    "nozzle_diameter": "0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_k1max_buildplate_model.stl",
+    "bed_texture": "creality_k1max_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 SE 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality K1 SE 0.4 nozzle.json
new file mode 100644
index 0000000..51e322a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 SE 0.4 nozzle.json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 SE 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1 SE",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality K1 SE 0.4",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "0",
+    "support_air_filtration": "0",
+    "support_multi_bed_types": "0",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "30"
+    ],
+    "machine_max_jerk_e": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_z": [
+        "5",
+        "5"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.4"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "0",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality Generic PLA @K1-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails_format": "PNG",
+    "thumbnails": [
+        "300x300",
+        "96x96"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1 SE.json b/OrcaSlicer/system/Creality/machine/Creality K1 SE.json
new file mode 100644
index 0000000..e8a6d98
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1 SE.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality K1 SE",
+    "model_id": "Creality-K1-SE",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_k1se_buildplate_model.stl",
+    "bed_texture": "creality_k1se_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1.json b/OrcaSlicer/system/Creality/machine/Creality K1.json
new file mode 100644
index 0000000..73e10d7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality K1",
+    "model_id": "Creality-K1",
+    "nozzle_diameter": "0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_k1_buildplate_model.stl",
+    "bed_texture": "creality_k1_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PC @K1-all;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PETG;Creality Generic TPU"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1C 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality K1C 0.4 nozzle.json
new file mode 100644
index 0000000..d4deca8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1C 0.4 nozzle.json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1C 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1C",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality K1C (0.4 nozzle)",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality Generic PLA @K1-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1C 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality K1C 0.6 nozzle.json
new file mode 100644
index 0000000..46b2ae9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1C 0.6 nozzle.json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1C 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1C",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.30mm Standard @Creality K1C (0.6 nozzle)",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_speed_y": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "30"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.4"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality Generic PLA @K1-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1C 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality K1C 0.8 nozzle.json
new file mode 100644
index 0000000..d96df6c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1C 0.8 nozzle.json	
@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1C 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1C",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.40mm Standard @Creality K1C (0.8 nozzle)",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_speed_y": [
+        "1000",
+        "1000"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "30"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.5"
+    ],
+    "min_layer_height": [
+        "0.16"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality Generic PLA @K1-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality K1C.json b/OrcaSlicer/system/Creality/machine/Creality K1C.json
new file mode 100644
index 0000000..610866a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K1C.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality K1C",
+    "model_id": "Creality-K1C",
+    "nozzle_diameter": "0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_k1c_buildplate_model.stl",
+    "bed_texture": "creality_k1c_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.2 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.2 nozzle.json
new file mode 100644
index 0000000..1c36aa9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.2 nozzle.json	
@@ -0,0 +1,149 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K2 Plus 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K2 Plus",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle",
+    "nozzle_diameter": [
+        "0.2"
+    ],
+    "printer_variant": "0.2",
+    "printable_area": [
+        "0x0",
+        "350x0",
+        "350x350",
+        "0x350"
+    ],
+    "printable_height": "350",
+    "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_x": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_y": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_z": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_speed_e": [
+        "50",
+        "50"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_z": [
+        "5",
+        "5"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
+    "enable_filament_ramming": "0",
+    "purge_in_prime_tower": "0",
+    "cooling_tube_length": "0",
+    "cooling_tube_retraction": "0",
+    "parking_pos_retraction": "0",
+    "extra_loading_move": "0",
+    "extruder_clearance_height_to_lid": "118",
+    "extruder_clearance_height_to_rod": "24",
+    "extruder_clearance_radius": "64",
+    "z_hop": [
+        "0.4"
+    ],
+    "wipe_distance": [
+        "1"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "0",
+    "default_filament_profile": [
+        "Creality Generic PLA @K2-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+    "machine_end_gcode": "END_PRINT",
+    "machine_pause_gcode": "PAUSE",
+    "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "scan_first_layer": "0",
+    "thumbnails_format": "PNG",
+    "thumbnails": [
+        "300x300",
+        "96x96"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..a050f9c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.4 nozzle.json	
@@ -0,0 +1,149 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K2 Plus 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K2 Plus",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "350x0",
+        "350x350",
+        "0x350"
+    ],
+    "printable_height": "350",
+    "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_x": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_y": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_z": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_speed_e": [
+        "50",
+        "50"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_z": [
+        "5",
+        "5"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
+    "enable_filament_ramming": "0",
+    "purge_in_prime_tower": "0",
+    "cooling_tube_length": "0",
+    "cooling_tube_retraction": "0",
+    "parking_pos_retraction": "0",
+    "extra_loading_move": "0",
+    "extruder_clearance_height_to_lid": "118",
+    "extruder_clearance_height_to_rod": "24",
+    "extruder_clearance_radius": "64",
+    "z_hop": [
+        "0.4"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "0",
+    "default_filament_profile": [
+        "Creality Generic PLA @K2-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+    "machine_end_gcode": "END_PRINT",
+    "machine_pause_gcode": "PAUSE",
+    "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "scan_first_layer": "0",
+    "thumbnails_format": "PNG",
+    "thumbnails": [
+        "300x300",
+        "96x96"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.6 nozzle.json
new file mode 100644
index 0000000..52da4af
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.6 nozzle.json	
@@ -0,0 +1,149 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K2 Plus 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K2 Plus",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "350x0",
+        "350x350",
+        "0x350"
+    ],
+    "printable_height": "350",
+    "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_x": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_y": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_z": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_speed_e": [
+        "50",
+        "50"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_z": [
+        "5",
+        "5"
+    ],
+    "max_layer_height": [
+        "0.42"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
+    "enable_filament_ramming": "0",
+    "purge_in_prime_tower": "0",
+    "cooling_tube_length": "0",
+    "cooling_tube_retraction": "0",
+    "parking_pos_retraction": "0",
+    "extra_loading_move": "0",
+    "extruder_clearance_height_to_lid": "118",
+    "extruder_clearance_height_to_rod": "24",
+    "extruder_clearance_radius": "64",
+    "z_hop": [
+        "0.4"
+    ],
+    "wipe_distance": [
+        "1"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "0",
+    "default_filament_profile": [
+        "Creality Generic PLA @K2-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+    "machine_end_gcode": "END_PRINT",
+    "machine_pause_gcode": "PAUSE",
+    "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "scan_first_layer": "0",
+    "thumbnails_format": "PNG",
+    "thumbnails": [
+        "300x300",
+        "96x96"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.8 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.8 nozzle.json
new file mode 100644
index 0000000..82365d4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.8 nozzle.json	
@@ -0,0 +1,149 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K2 Plus 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K2 Plus",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "350x0",
+        "350x350",
+        "0x350"
+    ],
+    "printable_height": "350",
+    "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_x": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_y": [
+        "30000",
+        "30000"
+    ],
+    "machine_max_acceleration_z": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_speed_e": [
+        "50",
+        "50"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "10",
+        "10"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_z": [
+        "5",
+        "5"
+    ],
+    "max_layer_height": [
+        "0.56"
+    ],
+    "min_layer_height": [
+        "0.16"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
+    "enable_filament_ramming": "0",
+    "purge_in_prime_tower": "0",
+    "cooling_tube_length": "0",
+    "cooling_tube_retraction": "0",
+    "parking_pos_retraction": "0",
+    "extra_loading_move": "0",
+    "extruder_clearance_height_to_lid": "118",
+    "extruder_clearance_height_to_rod": "24",
+    "extruder_clearance_radius": "64",
+    "z_hop": [
+        "0.4"
+    ],
+    "wipe_distance": [
+        "1"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "0",
+    "default_filament_profile": [
+        "Creality Generic PLA @K2-all"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+    "machine_end_gcode": "END_PRINT",
+    "machine_pause_gcode": "PAUSE",
+    "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "scan_first_layer": "0",
+    "thumbnails_format": "PNG",
+    "thumbnails": [
+        "300x300",
+        "96x96"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality K2 Plus.json b/OrcaSlicer/system/Creality/machine/Creality K2 Plus.json
new file mode 100644
index 0000000..7cb68b5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality K2 Plus.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality K2 Plus",
+    "model_id": "Creality-K2-Plus",
+    "nozzle_diameter": "0.2;0.4;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_k2plus_buildplate_model.stl",
+    "bed_texture": "creality_k2plus_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic ABS @K2-all;Creality Generic ASA @K2-all;Creality Generic PETG @K2-all;Creality Generic PLA @K2-all;Creality Generic PLA High Speed @K2-all;Creality Generic PLA Matte @K2-all;Creality Generic PLA Silk @K2-all"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/machine/Creality Sermoon V1 0.4 nozzle.json b/OrcaSlicer/system/Creality/machine/Creality Sermoon V1 0.4 nozzle.json
new file mode 100644
index 0000000..c819c98
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Sermoon V1 0.4 nozzle.json	
@@ -0,0 +1,73 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality Sermoon V1 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality Sermoon V1",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality Sermoon V1",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "retract_when_changing_layer": [
+    "0"
+  ],
+  "retraction_length": [
+    "0.8"
+  ],
+  "z_hop": [
+        "0"
+  ],
+  "machine_max_acceleration_extruding": [
+      "7000",
+      "500"
+  ],
+  "machine_max_acceleration_retracting": [
+      "7000",
+      "1000"
+  ],
+  "machine_max_acceleration_x": [
+      "7000",
+      "500"
+  ],
+  "machine_max_acceleration_y": [
+      "7000",
+      "500"
+  ],
+  "machine_max_speed_x": [
+      "7000",
+      "500"
+  ],
+  "machine_max_speed_y": [
+      "7000",
+      "500"
+  ],
+  "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\n;AFTER_LAYER_CHANGE\n;Z>[layer_z]",
+  "machine_start_gcode": ";generated by SuperSlicer 1.5.0 on 2023-06-07 at 17:32:332\nG90 ; use absolute coordinates\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM140 S[bed_temperature_initial_layer]                       ; Set bed temp\nM104 S170 ; set temporary nozzle temp to prevent oozing during homing\nG28                                    ; Home\nM105                                   ; Report Temps\nM190 S[bed_temperature_initial_layer]                        ; Wait for bed to reach target\nM104 S[nozzle_temperature_initial_layer]                           ; Set hot end temp\nM105                                   ; Report Temps\nM109 S[nozzle_temperature_initial_layer]                           ; Wait for hot end to reach target\nM105                                   ; Report Temps\nM82                                    ; Absolute extrusion mode\n#G28                                    ; Home\nG92 E0                                 ; Reset Extruder\nG1 Z2.0 F3000                          ; Move Z Axis up\nG1 X173.0 Y10 Z0.28 F5000.0             ; Move to start position\nG1 X173.0 Y170.0 Z0.28 F1500.0 E15      ; Draw the first line\nG1 X173.4 Y170.0 Z0.28 F5000.0          ; Move to side a little\nG1 X173.4 Y40 Z0.28 F1500.0 E30         ; Draw the second line\nG92 E0                                 ; Reset Extruder\nG1 Z2.0 F3000                          ; Move Z Axis up\nG92 E0\nSTART_PRINT",
+  "machine_end_gcode": "M140 S0                                ; Turn-off bed\nM107                                   ; Turn off cooling fan\nG91                                    ; Relative positioning\nG1 E-1 F2700                           ; Retract\nG1 E-2 Z0.2 F2400                      ; Retract and raise Z\nG1 X5 Y5 F3000                         ; Wipe\nG1 Z0.95                               ; Raise Z more\nG90                                    ; Absolute positioning\nG1 X10 Y160                            ; Eject print\nM106 S0                                ; Turn off fan\nM104 S0                                ; Turn-off hot end\nM140 S0                                ; Turn-off bed\n{ if max_layer_z < printable_height-10 }G1 Z{min(max_layer_z+70,printable_height-10)}; move print up {endif}; Eject print z (conditional)\nM84 X Y E                              ; Disable steppers except Z\nG92 E0                                 ; Reset Extruder\nM82;abs extrusion\nEND_PRINT",
+  "machine_pause_gcode": "M25 ;pause print\n; Sermoon V1 Marlin buffers commands, so flush with these G4 P10 commands\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\n",
+  "printable_area": [
+    "0x0",
+    "175x0",
+    "175x175",
+    "0x175"
+  ],
+  "print_host": "10.0.0.51",
+  "print_host_webui": "10.0.0.51",
+  "gcode_flavor": "marlin",
+  "thumbnails": [
+    "64x64",
+    "400x400"
+  ],
+  "extruder_clearance_height_to_lid": "125",
+  "extruder_clearance_height_to_rod": "40",
+  "extruder_clearance_radius": "50",
+  "printable_height": "165",
+  "change_filament_gcode": "; S1 Pause For Filament change\nM125",
+  "nozzle_type": "brass",
+  "auxiliary_fan": "1"
+}
diff --git a/OrcaSlicer/system/Creality/machine/Creality Sermoon V1.json b/OrcaSlicer/system/Creality/machine/Creality Sermoon V1.json
new file mode 100644
index 0000000..b09dff7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/Creality Sermoon V1.json	
@@ -0,0 +1,15 @@
+{
+    "type": "machine_model",
+    "name": "Creality Sermoon V1",
+    "model_id": "Creality_Sermoon_V1",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "",
+    "bed_texture": "",
+    "z_hop_types": [
+      "Spiral Lift"
+    ],
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS;Creality Generic TPU"
+}
diff --git a/OrcaSlicer/system/Creality/machine/fdm_creality_common.json b/OrcaSlicer/system/Creality/machine/fdm_creality_common.json
new file mode 100644
index 0000000..4b39e76
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/fdm_creality_common.json
@@ -0,0 +1,139 @@
+{
+  "type": "machine",
+  "name": "fdm_creality_common",
+  "from": "system",
+  "instantiation": "false",
+  "inherits": "fdm_machine_common",
+  "gcode_flavor": "marlin",
+  "machine_max_acceleration_e": [
+    "5000",
+    "5000"
+  ],
+  "machine_max_acceleration_extruding": [
+    "500",
+    "500"
+  ],
+  "machine_max_acceleration_retracting": [
+    "1000",
+    "1000"
+  ],
+  "machine_max_acceleration_travel": [
+    "500",
+    "500"
+  ],
+  "machine_max_acceleration_x": [
+    "500",
+    "500"
+  ],
+  "machine_max_acceleration_y": [
+    "500",
+    "500"
+  ],
+  "machine_max_acceleration_z": [
+    "500",
+    "500"
+  ],
+  "machine_max_speed_e": [
+    "60",
+    "60"
+  ],
+  "machine_max_speed_x": [
+    "500",
+    "500"
+  ],
+  "machine_max_speed_y": [
+    "500",
+    "500"
+  ],
+  "machine_max_speed_z": [
+    "10",
+    "10"
+  ],
+  "machine_max_jerk_e": [
+    "5",
+    "5"
+  ],
+  "machine_max_jerk_x": [
+    "8",
+    "8"
+  ],
+  "machine_max_jerk_y": [
+    "8",
+    "8"
+  ],
+  "machine_max_jerk_z": [
+    "0.4",
+    "0.4"
+  ],
+  "machine_min_extruding_rate": [
+    "0",
+    "0"
+  ],
+  "machine_min_travel_rate": [
+    "0",
+    "0"
+  ],
+  "max_layer_height": [
+    "0.32"
+  ],
+  "min_layer_height": [
+    "0.08"
+  ],
+  "printable_height": "250",
+  "extruder_clearance_radius": "47",
+  "extruder_clearance_height_to_rod": "34",
+  "extruder_clearance_height_to_lid": "34",
+  "printer_settings_id": "",
+  "printer_technology": "FFF",
+  "printer_variant": "0.4",
+  "retraction_minimum_travel": [
+    "2"
+  ],
+  "retract_before_wipe": [
+    "70%"
+  ],
+  "retract_when_changing_layer": [
+    "1"
+  ],
+  "retraction_length": [
+    "5"
+  ],
+  "retract_length_toolchange": [
+    "2"
+  ],
+  "z_hop": [
+    "0.4"
+  ],
+  "retract_restart_extra": [
+    "0"
+  ],
+  "retract_restart_extra_toolchange": [
+    "0"
+  ],
+  "retraction_speed": [
+    "60"
+  ],
+  "deretraction_speed": [
+    "40"
+  ],
+  "silent_mode": "0",
+  "single_extruder_multi_material": "1",
+  "change_filament_gcode": "",
+  "machine_pause_gcode": "M25 ;pause print",
+  "wipe": [
+    "1"
+  ],
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality",
+  "bed_exclude_area": [
+    "0x0"
+  ],
+  "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+  "layer_change_gcode": "",
+  "scan_first_layer": "0",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Creality/machine/fdm_machine_common.json b/OrcaSlicer/system/Creality/machine/fdm_machine_common.json
new file mode 100644
index 0000000..5226911
--- /dev/null
+++ b/OrcaSlicer/system/Creality/machine/fdm_machine_common.json
@@ -0,0 +1,120 @@
+{
+    "type": "machine",
+    "name": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "printer_technology": "FFF",
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "gcode_flavor": "marlin",
+    "silent_mode": "0",
+	"support_chamber_temp_control": "0",
+	"support_air_filtration": "0",
+    "machine_max_acceleration_e": [
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "10000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000"
+    ],
+    "machine_max_acceleration_x": [
+        "10000"
+    ],
+    "machine_max_acceleration_y": [
+        "10000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "60"
+    ],
+    "machine_max_speed_x": [
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "5"
+    ],
+    "machine_max_jerk_x": [
+        "8"
+    ],
+    "machine_max_jerk_y": [
+        "8"
+    ],
+    "machine_max_jerk_z": [
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "1"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "60"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "wipe": [
+        "1"
+    ],
+    "z_hop_types": "Normal Lift",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
+    "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
+    "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
+}
diff --git a/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality CR-6 0.2.json b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality CR-6 0.2.json
new file mode 100644
index 0000000..490f0d3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality CR-6 0.2.json	
@@ -0,0 +1,24 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm SuperDetail @Creality CR-6 0.2",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "bottom_shell_layers": "5",
+    "initial_layer_line_width": "0.2",
+    "initial_layer_print_height": "0.12",
+    "inner_wall_line_width": "0.2",
+    "internal_solid_infill_line_width": "0.2",
+    "layer_height": "0.08",
+    "line_width": "0.2",
+    "outer_wall_line_width": "0.2",
+    "sparse_infill_line_width": "0.2",
+    "support_line_width": "0.2",
+    "top_shell_layers": "6",
+    "top_surface_line_width": "0.2",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.2 nozzle",
+        "Creality CR-6 Max 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json
new file mode 100644
index 0000000..7cec18d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_2",
+    "bottom_shell_layers": "9",
+    "top_shell_layers": "11",
+    "layer_height": "0.08",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json
new file mode 100644
index 0000000..549411b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_25",
+    "bottom_shell_layers": "9",
+    "top_shell_layers": "11",
+    "layer_height": "0.08",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json
new file mode 100644
index 0000000..793afc2
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_3",
+    "bottom_shell_layers": "9",
+    "top_shell_layers": "11",
+    "layer_height": "0.08",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json
new file mode 100644
index 0000000..e21dcea
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm SuperDetail @Creality Hi",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "7",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "8%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.08",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "tree(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "9",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "35",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "default_jerk": "12",
+    "outer_wall_jerk": "8",
+    "inner_wall_jerk": "8",
+    "infill_jerk": "12",
+    "top_surface_jerk": "8",
+    "initial_layer_jerk": "8",
+    "travel_jerk": "12"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json
new file mode 100644
index 0000000..0aaf929
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.22",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.22",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.25",
+    "initial_layer_print_height": "0.1",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.25",
+    "infill_wall_overlap": "30",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.08",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.25",
+    "inner_wall_speed": "150",
+    "wall_loops": "4",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.22",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.2",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.22",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "7",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..ee060f2
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "7",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.4 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "350",
+    "interface_shells": "0",
+    "ironing_flow": "8%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.08",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "350",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "9",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "40",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-6 0.4.json b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-6 0.4.json
new file mode 100644
index 0000000..1cb638b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-6 0.4.json	
@@ -0,0 +1,22 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.10mm HighDetail @Creality 0.4 CR-6 0.4",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.3",
+    "inner_wall_line_width": "0.3",
+    "internal_solid_infill_line_width": "0.3",
+    "layer_height": "0.1",
+    "line_width": "0.3",
+    "outer_wall_line_width": "0.3",
+    "sparse_infill_line_width": "0.3",
+    "support_line_width": "0.3",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.3",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.4 nozzle",
+        "Creality CR-6 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-M4.json b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-M4.json
new file mode 100644
index 0000000..fe86b26
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-M4.json	
@@ -0,0 +1,103 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.10mm HighDetail @Creality CR-M4",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "15",
+    "brim_width": ".4",
+    "brim_object_gap": "0.1",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.44",
+    "initial_layer_print_height": "0.1",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.4",
+    "infill_wall_overlap": "30%",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "20",
+    "ironing_type": "no ironing",
+    "layer_height": "0.1",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "35",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.4",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "nearest",
+    "skirt_distance": "3",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "1.33",
+    "support_interface_speed": "25",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "60",
+    "support_threshold_angle": "60",
+    "support_object_xy_distance": "0.8",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "inital_travel_speed": "25",
+    "initial_layer_infill_speed": "15",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "25",
+    "internal_solid_infill_speed": "50",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "100",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-M4 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json
new file mode 100644
index 0000000..f250aea
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.2",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_2",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9",
+    "layer_height": "0.1",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json
new file mode 100644
index 0000000..b1206a2
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.25",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_25",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9",
+    "layer_height": "0.1",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json
new file mode 100644
index 0000000..9538235
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.3",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_3",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9",
+    "layer_height": "0.1",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json
new file mode 100644
index 0000000..8a1fda4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.22",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.22",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.25",
+    "initial_layer_print_height": "0.1",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.25",
+    "infill_wall_overlap": "30",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.1",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.25",
+    "inner_wall_speed": "150",
+    "wall_loops": "4",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.22",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.2",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.22",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "7",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.2.json b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.2.json
new file mode 100644
index 0000000..35f2965
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.2.json	
@@ -0,0 +1,24 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Detail @Creality CR-6 0.2",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "bottom_shell_layers": "5",
+    "initial_layer_line_width": "0.2",
+    "initial_layer_print_height": "0.12",
+    "inner_wall_line_width": "0.2",
+    "internal_solid_infill_line_width": "0.2",
+    "layer_height": "0.12",
+    "line_width": "0.2",
+    "outer_wall_line_width": "0.2",
+    "sparse_infill_line_width": "0.2",
+    "support_line_width": "0.2",
+    "top_shell_layers": "6",
+    "top_surface_line_width": "0.2",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.2 nozzle",
+        "Creality CR-6 Max 0.2 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.4.json b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.4.json
new file mode 100644
index 0000000..44679ac
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.4.json	
@@ -0,0 +1,17 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Detail @Creality 0.4 CR-6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.4",
+    "inner_wall_line_width": "0.4",
+    "layer_height": "0.12",
+    "sparse_infill_line_width": "0.4",
+    "top_shell_layers": "4",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.4 nozzle",
+        "Creality CR-6 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json
new file mode 100644
index 0000000..3735306
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.2",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_2",
+    "bottom_shell_layers": "6",
+    "top_shell_layers": "7",
+    "layer_height": "0.12",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json
new file mode 100644
index 0000000..c0657fa
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.25",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_25",
+    "bottom_shell_layers": "6",
+    "top_shell_layers": "7",
+    "layer_height": "0.12",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json
new file mode 100644
index 0000000..02eed0a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.3",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_3",
+    "bottom_shell_layers": "6",
+    "top_shell_layers": "7",
+    "layer_height": "0.12",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json
new file mode 100644
index 0000000..b8014d3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.5",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_5",
+    "bottom_shell_layers": "6",
+    "top_shell_layers": "7",
+    "layer_height": "0.12",
+    "bridge_flow": "0.7"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json
new file mode 100644
index 0000000..edbd1dc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.22",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.22",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.25",
+    "initial_layer_print_height": "0.1",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.25",
+    "infill_wall_overlap": "30",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.25",
+    "inner_wall_speed": "150",
+    "wall_loops": "4",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.22",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.2",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.22",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "7",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..842b073
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.4 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "300",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "6",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "40",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10Max.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10Max.json
new file mode 100644
index 0000000..1b4cb0f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10Max.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality CR10Max",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "6",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-10 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json
new file mode 100644
index 0000000..be3df15
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality CR10SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.25",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.25",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.25",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10SE 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json
new file mode 100644
index 0000000..6bd0765
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality CR10SE 0.4",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json
new file mode 100644
index 0000000..2eeca51
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality CR10SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.65",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.65",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.65",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.65",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.65",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json
new file mode 100644
index 0000000..5e0d570
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality CR10SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.85",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.85",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.85",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.2.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.2.json
new file mode 100644
index 0000000..4d13a37
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.4.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.4.json
new file mode 100644
index 0000000..1ad9ee0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.6.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.6.json
new file mode 100644
index 0000000..388dc35
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.8.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.8.json
new file mode 100644
index 0000000..5f415e0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000..149b060
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000..21b1ea9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000..51d36a3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000..b930085
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2.json
new file mode 100644
index 0000000..482510d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality Ender3V2",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "6",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V2 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json
new file mode 100644
index 0000000..91766d0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality Ender3V2Neo",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "6",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V2 Neo 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json
new file mode 100644
index 0000000..57d4c8a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality Ender-3 V3",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Ender-3 V3 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3KE.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3KE.json
new file mode 100644
index 0000000..8e3b8b6
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
@@ -0,0 +1,120 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3V3KE",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.05",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.45",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "200",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "300",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"role_based_wipe_speed" : "0",
+	"wipe_speed": "200",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0.025",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"accel_to_decel_enable": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 KE 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json
new file mode 100644
index 0000000..9265f5b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality Ender-3 V3 Plus",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Ender-3 V3 Plus 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "300",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "8000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json
new file mode 100644
index 0000000..110c3ed
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3V3SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.22",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.26",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.26",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.22",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.22",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json
new file mode 100644
index 0000000..0f61222
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3V3SE 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json
new file mode 100644
index 0000000..a5e16d4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3V3SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.62",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.66",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.62",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.58",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.62",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.6 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json
new file mode 100644
index 0000000..9cd2830
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.12mm Fine @Creality Ender3V3SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.12",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.82",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.86",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.86",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.78",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "4",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.82",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.8 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json
new file mode 100644
index 0000000..96e4873
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality Ender5Pro (2019)",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "6",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 Pro (2019) 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json
new file mode 100644
index 0000000..d091be7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json	
@@ -0,0 +1,126 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality Hi",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "tree(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.24",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "35",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "default_jerk": "12",
+    "outer_wall_jerk": "8",
+    "inner_wall_jerk": "8",
+    "infill_jerk": "12",
+    "top_surface_jerk": "8",
+    "initial_layer_jerk": "8",
+    "travel_jerk": "12"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json
new file mode 100644
index 0000000..ffb4b24
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality K1 (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 (0.4 nozzle)"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json
new file mode 100644
index 0000000..15a6490
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json	
@@ -0,0 +1,119 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality K1 SE",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 SE 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "precise_outer_wall": "1"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json
new file mode 100644
index 0000000..4201d9d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json
new file mode 100644
index 0000000..7716091
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality K1Max (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.4 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json b/OrcaSlicer/system/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json
new file mode 100644
index 0000000..cb5884d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.22",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.22",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.25",
+    "initial_layer_print_height": "0.1",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.25",
+    "infill_wall_overlap": "30",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.14",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.25",
+    "inner_wall_speed": "150",
+    "wall_loops": "4",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.22",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.2",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.22",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "7",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.15mm Detail @Creality CR-M4.json b/OrcaSlicer/system/Creality/process/0.15mm Detail @Creality CR-M4.json
new file mode 100644
index 0000000..10711b0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.15mm Detail @Creality CR-M4.json	
@@ -0,0 +1,103 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.15mm Detail @Creality CR-M4",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "15",
+    "brim_width": ".4",
+    "brim_object_gap": "0.1",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.44",
+    "initial_layer_print_height": "0.15",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.4",
+    "infill_wall_overlap": "30%",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "20",
+    "ironing_type": "no ironing",
+    "layer_height": "0.15",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "35",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.4",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "nearest",
+    "skirt_distance": "3",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "1.33",
+    "support_interface_speed": "25",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "60",
+    "support_threshold_angle": "60",
+    "support_object_xy_distance": "0.8",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "inital_travel_speed": "25",
+    "initial_layer_infill_speed": "15",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "25",
+    "internal_solid_infill_speed": "50",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "100",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-M4 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality CR10Max.json b/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality CR10Max.json
new file mode 100644
index 0000000..b1eefe7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality CR10Max.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.15mm Optimal @Creality CR10Max",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.15",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-10 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender3V2.json b/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender3V2.json
new file mode 100644
index 0000000..efbbca9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender3V2.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.15mm Optimal @Creality Ender3V2",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.15",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V2 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json b/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json
new file mode 100644
index 0000000..021375e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.15mm Optimal @Creality Ender5Pro (2019)",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.15",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 Pro (2019) 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.2.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.2.json
new file mode 100644
index 0000000..0e97389
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.2.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality CR-6 0.2",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "bottom_shell_layers": "6",
+    "initial_layer_line_width": "0.2",
+    "initial_layer_print_height": "0.16",
+    "inner_wall_line_width": "0.2",
+    "internal_solid_infill_line_width": "0.2",
+    "layer_height": "0.16",
+    "line_width": "0.2",
+    "outer_wall_line_width": "0.2",
+    "sparse_infill_line_width": "0.2",
+    "support_line_width": "0.2",
+    "top_surface_line_width": "0.2",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.2 nozzle",
+        "Creality CR-6 Max 0.2 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json
new file mode 100644
index 0000000..3bfa0d4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json	
@@ -0,0 +1,52 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality CR-6 0.4",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "adaptive_layer_height": "1",
+    "brim_object_gap": "0",
+    "brim_width": "0",
+    "default_acceleration": "0",
+    "detect_thin_wall": "1",
+    "elefant_foot_compensation": "0.1",
+    "filename_format": "[input_filename_base].gcode",
+    "infill_wall_overlap": "25%",
+    "initial_layer_acceleration": "0",
+    "initial_layer_infill_speed": "35%",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_speed": "35%",
+    "inner_wall_acceleration": "0",
+    "internal_solid_infill_line_width": "0",
+    "internal_solid_infill_speed": "50",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "line_width": "0.45",
+    "minimum_sparse_infill_area": "10",
+    "outer_wall_line_width": "0.45",
+    "outer_wall_speed": "40",
+    "prime_tower_width": "60",
+    "skirt_height": "2",
+    "skirt_loops": "2",
+    "sparse_infill_speed": "60",
+    "support_base_pattern_spacing": "0.2",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_spacing": "0.2",
+    "support_interface_speed": "100%",
+    "support_interface_top_layers": "3",
+    "support_line_width": "0.38",
+    "support_object_xy_distance": "60%",
+    "support_speed": "40",
+    "support_style": "grid",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.15",
+    "top_surface_acceleration": "0",
+    "travel_acceleration": "0",
+    "tree_support_branch_angle": "40",
+    "wall_loops": "2",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.4 nozzle",
+        "Creality CR-6 Max 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.6.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.6.json
new file mode 100644
index 0000000..1dbdc16
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.6.json	
@@ -0,0 +1,24 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality CR-6 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "bottom_shell_layers": "5",
+    "initial_layer_line_width": "0.6",
+    "initial_layer_print_height": "0.3",
+    "inner_wall_line_width": "0.6",
+    "internal_solid_infill_line_width": "0.6",
+    "layer_height": "0.16",
+    "line_width": "0.6",
+    "outer_wall_line_width": "0.6",
+    "sparse_infill_line_width": "0.6",
+    "support_line_width": "0.6",
+    "top_shell_layers": "7",
+    "top_surface_line_width": "0.6",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.6 nozzle",
+        "Creality CR-6 Max 0.6 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json
new file mode 100644
index 0000000..f4d62a5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality CR10SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.25",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.25",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.25",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json
new file mode 100644
index 0000000..2e4809f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality CR10SE 0.4",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json
new file mode 100644
index 0000000..b2f286a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality CR10SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.65",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.63",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.63",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.63",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json
new file mode 100644
index 0000000..534f569
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality CR10SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.85",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.85",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.85",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10V2.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10V2.json
new file mode 100644
index 0000000..e897ed1
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10V2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality CR10V2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-10 V2 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json
new file mode 100644
index 0000000..30f0b27
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json
new file mode 100644
index 0000000..138ee4b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json
new file mode 100644
index 0000000..d3e5e40
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json
new file mode 100644
index 0000000..eddc531
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.8 nozzle"
+	]
+}	
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000..2a06bb5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000..646101a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000..a65f9b5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000..7d4496b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}	
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1.json
new file mode 100644
index 0000000..b13a3bc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json
new file mode 100644
index 0000000..3598264
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Plus 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.25",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json
new file mode 100644
index 0000000..dc3d53d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Plus 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.45",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json
new file mode 100644
index 0000000..40ecebc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Plus 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.65",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.65",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.65",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.58",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json
new file mode 100644
index 0000000..9af147c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Plus 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.85",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.78",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json
new file mode 100644
index 0000000..00c879a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3S1Pro",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json
new file mode 100644
index 0000000..7569e60
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Ender3V2Neo",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "6",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V2 Neo 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json
new file mode 100644
index 0000000..2c72981
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Ender-3 V3",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Ender-3 V3 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.16",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json
new file mode 100644
index 0000000..d0357c0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
@@ -0,0 +1,120 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3V3KE",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.05",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.45",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "200",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "300",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"role_based_wipe_speed" : "0",
+	"wipe_speed": "200",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0.025",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"accel_to_decel_enable": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 KE 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json
new file mode 100644
index 0000000..8101302
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Ender-3 V3 Plus",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Ender-3 V3 Plus 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.16",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "300",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "8000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json
new file mode 100644
index 0000000..0ad999c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3V3SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.22",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.26",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.26",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.22",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.22",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json
new file mode 100644
index 0000000..99a7c20
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3V3SE 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json
new file mode 100644
index 0000000..f7d17cb
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3V3SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.62",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.66",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.62",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.58",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.62",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.6 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json
new file mode 100644
index 0000000..284101f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender3V3SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.82",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.86",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.86",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.78",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.82",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.8 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5.json
new file mode 100644
index 0000000..47e76af
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender5",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Plus.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Plus.json
new file mode 100644
index 0000000..8cd7007
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Plus.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender5Plus",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 Plus 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json
new file mode 100644
index 0000000..b83910a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.2",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_2",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "layer_height": "0.16",
+    "bridge_flow": "0.85"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json
new file mode 100644
index 0000000..81aead0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.25",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_25",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "layer_height": "0.16",
+    "bridge_flow": "0.85"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json
new file mode 100644
index 0000000..65394ae
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.3",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_3",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "layer_height": "0.16",
+    "bridge_flow": "0.85"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json
new file mode 100644
index 0000000..b665f95
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.5",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_5",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "layer_height": "0.16",
+    "bridge_flow": "0.85"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json
new file mode 100644
index 0000000..6df9739
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_6",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "bridge_flow": "0.85",
+    "layer_height": "0.16"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S.json
new file mode 100644
index 0000000..3a49495
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender5S",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5S 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S1.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S1.json
new file mode 100644
index 0000000..04a5128
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S1.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender5S1",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 S1 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender6.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender6.json
new file mode 100644
index 0000000..2426364
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Creality Ender6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-6 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json
new file mode 100644
index 0000000..8b30e2b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json	
@@ -0,0 +1,119 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality Hi",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.16",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "tree(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "35",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json
new file mode 100644
index 0000000..42d05db
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality K1 (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 (0.4 nozzle)"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.16",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json
new file mode 100644
index 0000000..17e94d7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json	
@@ -0,0 +1,119 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality K1 SE",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 SE 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.16",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "precise_outer_wall": "1"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json
new file mode 100644
index 0000000..c1a798d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.16",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json
new file mode 100644
index 0000000..f55aa62
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.16",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.4 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..09af514
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.4 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "300",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "40",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Sermoon V1.json b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Sermoon V1.json
new file mode 100644
index 0000000..4fbf1b2
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Sermoon V1.json	
@@ -0,0 +1,112 @@
+{
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "65%",
+    "bottom_shell_thickness": "0.6",
+    "bridge_acceleration": "50%",
+    "bridge_speed": "120",
+    "brim_type": "no_brim",
+    "brim_width": "4",
+    "default_acceleration": "4000",
+    "default_jerk": "5",
+    "detect_thin_wall": "1",
+    "dont_filter_internal_bridges": "limited",
+    "elefant_foot_compensation": "0.3",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_support": "1",
+    "exclude_object": "1",
+    "from": "User",
+    "gap_infill_speed": "195",
+    "gcode_comments": "1",
+    "infill_combination": "0",
+    "infill_wall_overlap": "30%",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_acceleration": "3000",
+    "initial_layer_infill_speed": "75",
+    "initial_layer_jerk": "5",
+    "initial_layer_line_width": "0.61",
+    "initial_layer_speed": "58",
+    "initial_layer_travel_speed": "150",
+    "inner_wall_acceleration": "6000",
+    "inner_wall_line_width": "0.61",
+    "inner_wall_speed": "195",
+    "internal_bridge_support_thickness": "0.8",
+    "internal_solid_infill_line_width": "0.32",
+    "internal_solid_infill_speed": "195",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "45",
+    "is_custom_defined": "0",
+    "layer_height": "0.16",
+    "line_width": "0.61",
+    "max_bridge_length": "20",
+    "max_travel_detour_distance": "200",
+    "min_bead_width": "80%",
+    "min_feature_size": "20%",
+    "minimum_sparse_infill_area": "8",
+    "name": "0.16mm Optimal @Creality Sermoon V1",
+    "instantiation": "true",
+    "only_one_wall_first_layer": "1",
+    "only_one_wall_top": "1",
+    "outer_wall_acceleration": "4000",
+    "outer_wall_jerk": "5",
+    "outer_wall_line_width": "0.61",
+    "outer_wall_speed": "195",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "40",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "precise_outer_wall": "1",
+    "reduce_crossing_wall": "1",
+    "reduce_infill_retraction": "1",
+    "print_settings_id": "",
+    "scarf_joint_flow_ratio": "0.95",
+    "seam_gap": "6%",
+    "seam_slope_min_length": "12",
+    "seam_slope_steps": "6",
+    "seam_slope_type": "external",
+    "skirt_loops": "0",
+    "slowdown_for_curled_perimeters": "1",
+    "sparse_infill_density": "4%",
+    "sparse_infill_line_width": "0.4",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "195",
+    "support_base_pattern": "hollow",
+    "support_base_pattern_spacing": "7",
+    "support_bottom_z_distance": "0.7",
+    "support_critical_regions_only": "0",
+    "support_interface_pattern": "rectilinear_interlaced",
+    "support_interface_spacing": "2",
+    "support_interface_speed": "175",
+    "support_line_width": "0.56",
+    "support_object_xy_distance": "1.2",
+    "support_on_build_plate_only": "1",
+    "support_speed": "195",
+    "support_style": "tree_slim",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.28",
+    "support_type": "tree(auto)",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.84",
+    "top_solid_infill_flow_ratio": "0.95",
+    "top_surface_acceleration": "5000",
+    "top_surface_jerk": "5",
+    "top_surface_line_width": "0.32",
+    "top_surface_speed": "195",
+    "travel_acceleration": "4000",
+    "travel_speed": "195",
+    "tree_support_branch_angle": "50",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_distance": "10",
+    "tree_support_wall_count": "1",
+    "wall_loops": "2",
+    "tree_support_adaptive_layer_height": "0",
+    "version": "2.0.0.0",
+    "wall_infill_order": "infill/inner wall/outer wall",
+    "xy_hole_compensation": "0.05",
+    "xy_contour_compensation": "-0.05",
+    "independent_support_layer_height": "0",
+    "compatible_printers": [
+        "Creality Sermoon V1 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json
new file mode 100644
index 0000000..21399d9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.6 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.65",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.18",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.4.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.4.json
new file mode 100644
index 0000000..6626135
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.4.json	
@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality CR-6 0.4",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "top_shell_layers": "4",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.4 nozzle",
+        "Creality CR-6 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.6.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.6.json
new file mode 100644
index 0000000..2f34f8c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.6.json	
@@ -0,0 +1,21 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality CR-6 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.63",
+    "initial_layer_print_height": "0.3",
+    "inner_wall_line_width": "0.66",
+    "internal_solid_infill_line_width": "0.66",
+    "line_width": "0.66",
+    "outer_wall_line_width": "0.66",
+    "sparse_infill_line_width": "0.66",
+    "support_line_width": "0.54",
+    "top_surface_line_width": "0.66",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.6 nozzle",
+        "Creality CR-6 Max 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-M4.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-M4.json
new file mode 100644
index 0000000..bf0484a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-M4.json	
@@ -0,0 +1,103 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality CR-M4",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "15",
+    "brim_width": ".4",
+    "brim_object_gap": "0.1",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.44",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.4",
+    "infill_wall_overlap": "30%",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "20",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "35",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.4",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "nearest",
+    "skirt_distance": "3",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "1.33",
+    "support_interface_speed": "25",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "60",
+    "support_threshold_angle": "60",
+    "support_object_xy_distance": "0.8",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "inital_travel_speed": "25",
+    "initial_layer_infill_speed": "15",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "25",
+    "internal_solid_infill_speed": "50",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "100",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-M4 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10Max.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10Max.json
new file mode 100644
index 0000000..eaae996
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10Max.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality CR10Max",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-10 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json
new file mode 100644
index 0000000..85b2bf3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality CR10SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.25",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.25",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.25",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json
new file mode 100644
index 0000000..dad7492
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality CR10SE 0.4",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json
new file mode 100644
index 0000000..5f07b63
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality CR10SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.65",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.65",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.65",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.65",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.65",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json
new file mode 100644
index 0000000..8667571
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality CR10SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.85",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.85",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.85",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10V2.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10V2.json
new file mode 100644
index 0000000..cabab4e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10V2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality CR10V2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-10 V2 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json
new file mode 100644
index 0000000..fdd6b77
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json	
@@ -0,0 +1,261 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_common_klipper",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "25%",
+    "acceleration_limit_mess_enable": "0",
+    "ai_infill": "0",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0.6",
+    "bottom_solid_infill_flow_ratio": "0.95",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "2000",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "1",
+    "bridge_no_support": "0",
+    "bridge_speed": "50",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0",
+    "brim_type": "auto_brim",
+    "brim_width": "1.2",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "15000",
+    "default_jerk": "9",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "0",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "1",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "everywhere",
+    "gap_infill_speed": "100",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "1",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "20",
+    "infill_wall_overlap": "30",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_infill_speed": "105",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.55",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "5000",
+    "inner_wall_jerk": "5",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": "500",
+    "ironing_angle": "-1",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "44",
+    "ironing_type": "no ironing",
+    "is_infill_first": "0",
+    "layer_height": "0.2",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "3",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "10",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "5000",
+    "outer_wall_jerk": "5",
+    "outer_wall_line_width": "0.4",
+    "outer_wall_speed": "300",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "0",
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
+    "prime_tower_enhance_type": "chamfer",
+    "prime_tower_width": "60",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "100",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "10%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "0",
+    "skirt_distance": "5",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "5",
+    "slowdown_for_curled_perimeters": "0",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "10",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.55",
+    "sparse_infill_pattern": "zig-zag",
+    "sparse_infill_speed": "500",
+    "speed_limit_to_height_enable": "0",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "2",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "2",
+    "support_line_width": "0.45",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "200",
+    "support_style": "default",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.2",
+    "support_type": "tree(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "1",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "5000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": "300",
+    "travel_acceleration": "15000",
+    "travel_jerk": "20",
+    "travel_speed": "500",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "30",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "45",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "0",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "10",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "20",
+    "tree_support_wall_count": "0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_loops": "2",
+    "wall_sequence": "inner wall/outer wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "100%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.2.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.2.json
new file mode 100644
index 0000000..d563ac7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.20",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.4.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.4.json
new file mode 100644
index 0000000..16c51aa
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.6.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.6.json
new file mode 100644
index 0000000..84e7cfa
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.8.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.8.json
new file mode 100644
index 0000000..806cd6c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000..7f04b6d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.20",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000..44d614a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000..9c99cbd
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000..e26c792
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3.json
new file mode 100644
index 0000000..eebce8f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1.json
new file mode 100644
index 0000000..11bc906
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json
new file mode 100644
index 0000000..e2daf57
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Plus 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.2",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json
new file mode 100644
index 0000000..a430f4b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Plus 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json
new file mode 100644
index 0000000..a0dab46
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Plus 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.65",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.65",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.6",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.58",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json
new file mode 100644
index 0000000..e26b27d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Plus 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.8",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.78",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json
new file mode 100644
index 0000000..325bc27
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3S1Pro",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2.json
new file mode 100644
index 0000000..6b416ee
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender3V2",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V2 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json
new file mode 100644
index 0000000..b0fe6db
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender3V2Neo",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V2 Neo 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json
new file mode 100644
index 0000000..95d923b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender-3 V3",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Ender-3 V3 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3KE.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3KE.json
new file mode 100644
index 0000000..6321b57
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
@@ -0,0 +1,121 @@
+
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3V3KE",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.05",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.45",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "200",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "300",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"role_based_wipe_speed": "0",
+	"wipe_speed": "200",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0.025",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"accel_to_decel_enable": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 KE 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json
new file mode 100644
index 0000000..e6219dc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender-3 V3 Plus",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Ender-3 V3 Plus 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "300",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "8000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json
new file mode 100644
index 0000000..fc612d8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3V3SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.22",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.26",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.26",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.22",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.22",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json
new file mode 100644
index 0000000..bda107b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3V3SE 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json
new file mode 100644
index 0000000..443b814
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3V3SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.62",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.66",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.62",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.58",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.62",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.6 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json
new file mode 100644
index 0000000..ee7d3eb
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender3V3SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.82",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.86",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.86",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.78",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.82",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.8 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5.json
new file mode 100644
index 0000000..5757e91
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender5",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Plus.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Plus.json
new file mode 100644
index 0000000..358ef73
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Plus.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender5Plus",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 Plus 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json
new file mode 100644
index 0000000..d36e7a4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.25",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_25",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "layer_height": "0.20"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json
new file mode 100644
index 0000000..f00ede6
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.3",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_3",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "layer_height": "0.20"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json
new file mode 100644
index 0000000..6712100
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.5",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_5",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "layer_height": "0.20"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json
new file mode 100644
index 0000000..0351219
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_6",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "4",
+    "layer_height": "0.20"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json
new file mode 100644
index 0000000..ba94de8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_8",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "layer_height": "0.20"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json
new file mode 100644
index 0000000..b5a0207
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Ender5Pro (2019)",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 Pro (2019) 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S.json
new file mode 100644
index 0000000..9ef334c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender5S",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5S 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S1.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S1.json
new file mode 100644
index 0000000..3bbf579
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S1.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender5S1",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 S1 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender6.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender6.json
new file mode 100644
index 0000000..a0e1a0e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Creality Ender6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-6 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json
new file mode 100644
index 0000000..023cf2e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json	
@@ -0,0 +1,126 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality Hi",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "230",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "tree(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "35",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "default_jerk": "12",
+    "outer_wall_jerk": "8",
+    "inner_wall_jerk": "8",
+    "infill_jerk": "12",
+    "top_surface_jerk": "8",
+    "initial_layer_jerk": "8",
+    "travel_jerk": "12"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json
new file mode 100644
index 0000000..347f834
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality K1 (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 (0.4 nozzle)"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json
new file mode 100644
index 0000000..a2dee99
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json	
@@ -0,0 +1,112 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality K1 SE",
+    "renamed_from": "0.20mm Fast @Creality K1 SE 0.4",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "100",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 SE 0.4 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "1000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "200",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "250",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "initial_layer_travel_speed": "100%",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "precise_outer_wall": "1"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json
new file mode 100644
index 0000000..51b286a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json
new file mode 100644
index 0000000..b5e1a9e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.4 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..d209350
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.4 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "40",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Sermoon V1.json b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Sermoon V1.json
new file mode 100644
index 0000000..9cb78e5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Sermoon V1.json	
@@ -0,0 +1,112 @@
+{
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "65%",
+    "bottom_shell_thickness": "0.6",
+    "bridge_acceleration": "50%",
+    "bridge_speed": "120",
+    "brim_type": "no_brim",
+    "brim_width": "4",
+    "default_acceleration": "6000",
+    "default_jerk": "5",
+    "detect_thin_wall": "1",
+    "dont_filter_internal_bridges": "limited",
+    "elefant_foot_compensation": "0.3",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_support": "1",
+    "exclude_object": "1",
+    "from": "User",
+    "gap_infill_speed": "195",
+    "gcode_comments": "1",
+    "infill_combination": "0",
+    "infill_wall_overlap": "30%",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_acceleration": "3000",
+    "initial_layer_infill_speed": "75",
+    "initial_layer_jerk": "5",
+    "initial_layer_line_width": "0.61",
+    "initial_layer_speed": "58",
+    "initial_layer_travel_speed": "150",
+    "inner_wall_acceleration": "6000",
+    "inner_wall_line_width": "0.61",
+    "inner_wall_speed": "195",
+    "internal_bridge_support_thickness": "0.8",
+    "internal_solid_infill_line_width": "0.32",
+    "internal_solid_infill_speed": "195",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "45",
+    "is_custom_defined": "0",
+    "layer_height": "0.20",
+    "line_width": "0.61",
+    "max_bridge_length": "20",
+    "max_travel_detour_distance": "200",
+    "min_bead_width": "80%",
+    "min_feature_size": "20%",
+    "minimum_sparse_infill_area": "8",
+    "name": "0.20mm Standard @Creality Sermoon V1",
+    "instantiation": "true",
+    "only_one_wall_first_layer": "1",
+    "only_one_wall_top": "1",
+    "outer_wall_acceleration": "4000",
+    "outer_wall_jerk": "5",
+    "outer_wall_line_width": "0.61",
+    "outer_wall_speed": "150",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "40",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "precise_outer_wall": "1",
+    "reduce_crossing_wall": "1",
+    "reduce_infill_retraction": "1",
+    "print_settings_id": "",
+    "scarf_joint_flow_ratio": "0.95",
+    "seam_gap": "6%",
+    "seam_slope_min_length": "12",
+    "seam_slope_steps": "6",
+    "seam_slope_type": "external",
+    "skirt_loops": "0",
+    "slowdown_for_curled_perimeters": "1",
+    "sparse_infill_density": "4%",
+    "sparse_infill_line_width": "0.4",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "195",
+    "support_base_pattern": "hollow",
+    "support_base_pattern_spacing": "7",
+    "support_bottom_z_distance": "0.7",
+    "support_critical_regions_only": "0",
+    "support_interface_pattern": "rectilinear_interlaced",
+    "support_interface_spacing": "2",
+    "support_interface_speed": "175",
+    "support_line_width": "0.56",
+    "support_object_xy_distance": "1.2",
+    "support_on_build_plate_only": "1",
+    "support_speed": "195",
+    "support_style": "tree_slim",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.28",
+    "support_type": "tree(auto)",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.80",
+    "top_solid_infill_flow_ratio": "0.95",
+    "top_surface_acceleration": "6000",
+    "top_surface_jerk": "5",
+    "top_surface_line_width": "0.32",
+    "top_surface_speed": "195",
+    "travel_acceleration": "6000",
+    "travel_speed": "195",
+    "tree_support_branch_angle": "50",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_distance": "10",
+    "tree_support_wall_count": "1",
+    "wall_loops": "2",
+    "tree_support_adaptive_layer_height": "0",
+    "version": "2.0.0.0",
+    "wall_infill_order": "infill/inner wall/outer wall",
+    "xy_hole_compensation": "0.05",
+    "xy_contour_compensation": "-0.05",
+    "independent_support_layer_height": "0",
+    "compatible_printers": [
+        "Creality Sermoon V1 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json b/OrcaSlicer/system/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json
new file mode 100644
index 0000000..575476a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json	
@@ -0,0 +1,263 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_common_klipper",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "25%",
+    "acceleration_limit_mess_enable": "0",
+    "ai_infill": "0",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0.6",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "2000",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "1",
+    "bridge_no_support": "0",
+    "bridge_speed": "50",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0",
+    "brim_type": "auto_brim",
+    "brim_width": "1.2",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "20000",
+    "default_jerk": "9",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "0",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "1",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "everywhere",
+    "gap_infill_speed": "100",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "1",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "20",
+    "infill_wall_overlap": "25",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_infill_speed": "200",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.55",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "100",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "20000",
+    "inner_wall_jerk": "5",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "500",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": "500",
+    "ironing_angle": "-1",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "44",
+    "ironing_type": "no ironing",
+    "is_infill_first": "0",
+    "layer_height": "0.2",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "material_flow_dependent_temperature": "0",
+    "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "3",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "10",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "15000",
+    "outer_wall_jerk": "5",
+    "outer_wall_line_width": "0.4",
+    "outer_wall_speed": "350",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "0",
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
+    "prime_tower_enhance_type": "chamfer",
+    "prime_tower_width": "60",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "100",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "10%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "0",
+    "skirt_distance": "5",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "5",
+    "slowdown_for_curled_perimeters": "0",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"",
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "10",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.55",
+    "sparse_infill_pattern": "zig-zag",
+    "sparse_infill_speed": "500",
+    "speed_limit_to_height_enable": "0",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "2",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "2",
+    "support_line_width": "0.45",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "200",
+    "support_style": "default",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.2",
+    "support_type": "tree(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "1",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "15000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": "350",
+    "travel_acceleration": "20000",
+    "travel_jerk": "20",
+    "travel_speed": "500",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "30",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "45",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "0",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "10",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "20",
+    "tree_support_wall_count": "0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_loops": "2",
+    "wall_sequence": "inner wall/outer wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "100%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70",
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json
new file mode 100644
index 0000000..c953b04
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.8 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.82",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.82",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.82",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.3",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.4.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.4.json
new file mode 100644
index 0000000..185ef5a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.4.json	
@@ -0,0 +1,22 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality CR-6 0.4",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.4",
+    "inner_wall_line_width": "0.4",
+    "internal_solid_infill_line_width": "0.5",
+    "layer_height": "0.24",
+    "line_width": "0.5",
+    "outer_wall_line_width": "0.5",
+    "sparse_infill_line_width": "0.4",
+    "support_line_width": "0.5",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.5",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.4 nozzle",
+        "Creality CR-6 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.6.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.6.json
new file mode 100644
index 0000000..ecf0d19
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.6.json	
@@ -0,0 +1,22 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality CR-6 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.6",
+    "initial_layer_print_height": "0.3",
+    "inner_wall_line_width": "0.6",
+    "internal_solid_infill_line_width": "0.6",
+    "layer_heigth": "0.24",
+    "line_width": "0.6",
+    "outer_wall_line_width": "0.6",
+    "sparse_infill_line_width": "0.6",
+    "support_line_width": "0.6",
+    "top_surface_line_width": "0.6",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.6 nozzle",
+        "Creality CR-6 Max 0.6 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10Max.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10Max.json
new file mode 100644
index 0000000..97d962c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10Max.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality CR10Max",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.45",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality CR-10 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json
new file mode 100644
index 0000000..0a17a8c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality CR10SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.25",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.25",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.25",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json
new file mode 100644
index 0000000..8819084
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality CR10SE 0.4",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json
new file mode 100644
index 0000000..0949770
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality CR10SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.65",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.65",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.65",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.65",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.65",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json
new file mode 100644
index 0000000..0a40eb1
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json	
@@ -0,0 +1,118 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality CR10SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "1",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "5000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.85",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.85",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.85",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "250",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "250",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"compatible_printers": [
+		"Creality CR-10 SE 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.2.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.2.json
new file mode 100644
index 0000000..efe6bfd
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.4.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.4.json
new file mode 100644
index 0000000..a2bd32e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.6.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.6.json
new file mode 100644
index 0000000..3f5c0f3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.8.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.8.json
new file mode 100644
index 0000000..6d61dd9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000..cf88482
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000..78bdc71
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000..952dbc0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000..09ef09f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json
new file mode 100644
index 0000000..8744bec
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3S1Plus 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.2",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "20",
+	"initial_layer_infill_speed": "25",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json
new file mode 100644
index 0000000..6b44412
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3S1Plus 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "20",
+	"initial_layer_infill_speed": "25",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json
new file mode 100644
index 0000000..484ecef
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3S1Plus 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.65",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.65",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.6",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.58",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "20",
+	"initial_layer_infill_speed": "25",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json
new file mode 100644
index 0000000..e66e047
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3S1Plus 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "1",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.8",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.78",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "20",
+	"initial_layer_infill_speed": "25",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 S1 Plus 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2.json
new file mode 100644
index 0000000..137370f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender3V2",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.45",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V2 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json
new file mode 100644
index 0000000..0b2ca12
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender3V2Neo",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.45",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V2 Neo 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json
new file mode 100644
index 0000000..4f211c6
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender-3 V3",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Ender-3 V3 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3KE.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3KE.json
new file mode 100644
index 0000000..12a55c4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
@@ -0,0 +1,120 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3V3KE",
+	"from": "system",
+	"inherits": "fdm_process_common_klipper",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "65",
+    "brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "5000",
+	"top_surface_acceleration": "5000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.05",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "5000",
+	"inner_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "44%",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "35",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.45",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "200",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "50",
+	"initial_layer_infill_speed": "105",
+	"outer_wall_speed": "200",
+	"inner_wall_speed": "300",
+	"internal_solid_infill_speed": "300",
+	"top_surface_speed": "250",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "300",
+	"travel_speed": "400",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"role_based_wipe_speed" : "0",
+	"wipe_speed": "200",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0.025",
+	"xy_contour_compensation": "0",
+	"default_jerk": "7",
+	"outer_wall_jerk": "7",
+	"inner_wall_jerk": "7",
+	"infill_jerk": "7",
+	"top_surface_jerk": "7",
+	"initial_layer_jerk": "7",
+	"travel_jerk": "7",
+	"accel_to_decel_enable": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 KE 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json
new file mode 100644
index 0000000..ebb0bca
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender-3 V3 Plus",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Ender-3 V3 Plus 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "8000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json
new file mode 100644
index 0000000..9ee7a0c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3V3SE 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.22",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.26",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.26",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.22",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.22",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json
new file mode 100644
index 0000000..fd1adb8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3V3SE 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.42",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.46",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.46",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.42",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.4 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json
new file mode 100644
index 0000000..62dc21f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3V3SE 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.62",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.66",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.65",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.65",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.62",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.58",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.62",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.6 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json
new file mode 100644
index 0000000..a7db0d2
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json	
@@ -0,0 +1,111 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Creality Ender3V3SE 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "100",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "2500",
+	"top_surface_acceleration": "2500",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.82",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.86",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "500",
+	"travel_acceleration": "2500",
+	"inner_wall_acceleration": "2000",
+	"outer_wall_acceleration": "1000",
+	"initial_layer_line_width": "0.86",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "20",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.78",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "50",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "2",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.82",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "30",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "180",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "50",
+	"sparse_infill_speed": "180",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.8 nozzle"
+	]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json
new file mode 100644
index 0000000..29fcdd9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.3",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_3",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.24"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json
new file mode 100644
index 0000000..3f1dfc5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.5",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_5",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.24"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json
new file mode 100644
index 0000000..3b9a2fc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_6",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.24"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json
new file mode 100644
index 0000000..eddca34
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_8",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.24"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json
new file mode 100644
index 0000000..1c4cfa0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json	
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Ender5Pro (2019)",
+    "from": "system",
+    "inherits": "fdm_process_creality_common",
+    "instantiation": "true",
+	"adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.45",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-5 Pro (2019) 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json
new file mode 100644
index 0000000..0ae0cd8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json	
@@ -0,0 +1,126 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality Hi",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "230",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "tree(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "35",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "default_jerk": "12",
+    "outer_wall_jerk": "8",
+    "inner_wall_jerk": "8",
+    "infill_jerk": "12",
+    "top_surface_jerk": "8",
+    "initial_layer_jerk": "8",
+    "travel_jerk": "12"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json
new file mode 100644
index 0000000..9084109
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality K1 (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 (0.4 nozzle)"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json
new file mode 100644
index 0000000..768c4c5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json	
@@ -0,0 +1,119 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality K1 SE",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 SE 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "precise_outer_wall": "1"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json
new file mode 100644
index 0000000..621f32c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json
new file mode 100644
index 0000000..4a6e91c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality K1Max (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "270",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.4 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..3220276
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.4 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "250",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "40",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality CR-6 0.8.json b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality CR-6 0.8.json
new file mode 100644
index 0000000..be0b893
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality CR-6 0.8.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality CR-6 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.8",
+    "initial_layer_print_height": "0.4",
+    "inner_wall_line_width": "0.8",
+    "internal_solid_infill_line_width": "0.8",
+    "layer_height": "0.24",
+    "line_width": "0.8",
+    "outer_wall_line_width": "0.8",
+    "sparse_infill_line_width": "0.8",
+    "support_line_width": "0.8",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.8",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.8 nozzle",
+        "Creality CR-6 Max 0.8 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json
new file mode 100644
index 0000000..326fe32
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality Ender-3 V3",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "enable_arc_fitting": "1",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality Ender-3 V3 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json
new file mode 100644
index 0000000..f7c4313
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json	
@@ -0,0 +1,118 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality Ender-3 V3 Plus",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "enable_arc_fitting": "1",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "8000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality Ender-3 V3 Plus 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json
new file mode 100644
index 0000000..31adad8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json	
@@ -0,0 +1,125 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality Hi",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Hi 0.6 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "default_jerk": "12",
+    "outer_wall_jerk": "8",
+    "inner_wall_jerk": "8",
+    "infill_jerk": "12",
+    "top_surface_jerk": "8",
+    "initial_layer_jerk": "8",
+    "travel_jerk": "12"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json
new file mode 100644
index 0000000..e0568e0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality K1 (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json
new file mode 100644
index 0000000..92bf6c5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1C 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json
new file mode 100644
index 0000000..9d359a6
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality K1Max (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json
new file mode 100644
index 0000000..2747831
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.6 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.65",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm Standard @Creality Sermoon V1.json b/OrcaSlicer/system/Creality/process/0.28mm Standard @Creality Sermoon V1.json
new file mode 100644
index 0000000..ee45c33
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm Standard @Creality Sermoon V1.json	
@@ -0,0 +1,112 @@
+{
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "65%",
+    "bottom_shell_thickness": "0.6",
+    "bridge_acceleration": "50%",
+    "bridge_speed": "120",
+    "brim_type": "no_brim",
+    "brim_width": "4",
+    "default_acceleration": "6000",
+    "default_jerk": "5",
+    "detect_thin_wall": "1",
+    "dont_filter_internal_bridges": "limited",
+    "elefant_foot_compensation": "0.3",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_support": "1",
+    "exclude_object": "1",
+    "from": "User",
+    "gap_infill_speed": "195",
+    "gcode_comments": "1",
+    "infill_combination": "0",
+    "infill_wall_overlap": "30%",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_acceleration": "3000",
+    "initial_layer_infill_speed": "75",
+    "initial_layer_jerk": "5",
+    "initial_layer_line_width": "0.61",
+    "initial_layer_speed": "58",
+    "initial_layer_travel_speed": "150",
+    "inner_wall_acceleration": "6000",
+    "inner_wall_line_width": "0.61",
+    "inner_wall_speed": "195",
+    "internal_bridge_support_thickness": "0.8",
+    "internal_solid_infill_line_width": "0.32",
+    "internal_solid_infill_speed": "195",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "45",
+    "is_custom_defined": "0",
+    "layer_height": "0.28",
+    "line_width": "0.61",
+    "max_bridge_length": "20",
+    "max_travel_detour_distance": "200",
+    "min_bead_width": "80%",
+    "min_feature_size": "20%",
+    "minimum_sparse_infill_area": "8",
+    "name": "0.28mm Standard @Creality Sermoon V1",
+    "instantiation": "true",
+    "only_one_wall_first_layer": "1",
+    "only_one_wall_top": "1",
+    "outer_wall_acceleration": "4000",
+    "outer_wall_jerk": "5",
+    "outer_wall_line_width": "0.61",
+    "outer_wall_speed": "195",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "40",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "precise_outer_wall": "1",
+    "reduce_crossing_wall": "1",
+    "reduce_infill_retraction": "1",
+    "print_settings_id": "",
+    "scarf_joint_flow_ratio": "0.95",
+    "seam_gap": "6%",
+    "seam_slope_min_length": "12",
+    "seam_slope_steps": "6",
+    "seam_slope_type": "external",
+    "skirt_loops": "0",
+    "slowdown_for_curled_perimeters": "1",
+    "sparse_infill_density": "4%",
+    "sparse_infill_line_width": "0.4",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "195",
+    "support_base_pattern": "hollow",
+    "support_base_pattern_spacing": "7",
+    "support_bottom_z_distance": "0.7",
+    "support_critical_regions_only": "0",
+    "support_interface_pattern": "rectilinear_interlaced",
+    "support_interface_spacing": "2",
+    "support_interface_speed": "175",
+    "support_line_width": "0.56",
+    "support_object_xy_distance": "1.2",
+    "support_on_build_plate_only": "1",
+    "support_speed": "195",
+    "support_style": "tree_slim",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.28",
+    "support_type": "tree(auto)",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.84",
+    "top_solid_infill_flow_ratio": "0.95",
+    "top_surface_acceleration": "6000",
+    "top_surface_jerk": "5",
+    "top_surface_line_width": "0.32",
+    "top_surface_speed": "195",
+    "travel_acceleration": "6000",
+    "travel_speed": "195",
+    "tree_support_branch_angle": "50",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_distance": "10",
+    "tree_support_wall_count": "1",
+    "wall_loops": "2",
+    "tree_support_adaptive_layer_height": "0",
+    "version": "2.0.0.0",
+    "wall_infill_order": "infill/inner wall/outer wall",
+    "xy_hole_compensation": "0.05",
+    "xy_contour_compensation": "-0.05",
+    "independent_support_layer_height": "0",
+    "compatible_printers": [
+        "Creality Sermoon V1 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.4.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.4.json
new file mode 100644
index 0000000..fea20f7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.4.json	
@@ -0,0 +1,18 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm SuperDraft @Creality CR-6 0.4",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.4",
+    "initial_layer_print_height": "0.28",
+    "inner_wall_line_width": "0.4",
+    "layer_height": "0.28",
+    "sparse_infill_line_width": "0.4",
+    "top_shell_layers": "4",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.4 nozzle",
+        "Creality CR-6 Max 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.6.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.6.json
new file mode 100644
index 0000000..d4774fc
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.6.json	
@@ -0,0 +1,22 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm SuperDraft @Creality CR-6 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.6",
+    "inner_wall_line_width": "0.6",
+    "internal_solid_infill_line_width": "0.6",
+    "line_width": "0.6",
+    "layer_height": "0.28",
+    "outer_wall_line_width": "0.6",
+    "sparse_infill_line_width": "0.6",
+    "support_line_width": "0.6",
+    "top_surface_line_width": "0.6",
+    "top_shell_layers": "4",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.6 nozzle",
+        "Creality CR-6 Max 0.6 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json
new file mode 100644
index 0000000..b44dc55
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json
new file mode 100644
index 0000000..6542991
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json
new file mode 100644
index 0000000..86f7bbf
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json
new file mode 100644
index 0000000..897e180
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json
new file mode 100644
index 0000000..5046ffa
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 Pro 0.2",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.25",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.25",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.22",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.25",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.25",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.18",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.2",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json
new file mode 100644
index 0000000..91250c7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 Pro 0.4",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json
new file mode 100644
index 0000000..7868df4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 Pro 0.6",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.63",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.66",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.63",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.66",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.54",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json
new file mode 100644
index 0000000..5ff1f6d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.28mm Draft @Creality Ender3 Pro 0.8",
+	"from": "system",
+	"inherits": "fdm_process_creality_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.28",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.95",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.85",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.85",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.85",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.85",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.82",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.7",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.8",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Creality Ender-3 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json
new file mode 100644
index 0000000..76c4c5e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_5",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.28"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json
new file mode 100644
index 0000000..837d684
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_6",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.28"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json
new file mode 100644
index 0000000..9ffd6db
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_8",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.28"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json
new file mode 100644
index 0000000..a2d6093
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_1_0",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.28"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json
new file mode 100644
index 0000000..c93d65b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.4 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "2000",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "250",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "200",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.28",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "200",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "250",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "40",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json
new file mode 100644
index 0000000..3486fa9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality Ender-3 V3",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.3",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality Ender-3 V3 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json
new file mode 100644
index 0000000..5321a63
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality Ender-3 V3 Plus",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.3",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "8000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality Ender-3 V3 Plus 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json
new file mode 100644
index 0000000..b960981
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json	
@@ -0,0 +1,125 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality Hi",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Hi 0.6 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.3",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "tree(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "35",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "default_jerk": "12",
+    "outer_wall_jerk": "8",
+    "inner_wall_jerk": "8",
+    "infill_jerk": "12",
+    "top_surface_jerk": "8",
+    "initial_layer_jerk": "8",
+    "travel_jerk": "12"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json
new file mode 100644
index 0000000..e004c3a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality K1 (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.3",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json
new file mode 100644
index 0000000..7cdbee7
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.3",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1C 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json
new file mode 100644
index 0000000..0065c97
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.3",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json
new file mode 100644
index 0000000..6207414
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.6 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.65",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.3",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.32mm Chunky @Creality CR-6 0.6.json b/OrcaSlicer/system/Creality/process/0.32mm Chunky @Creality CR-6 0.6.json
new file mode 100644
index 0000000..878680a
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.32mm Chunky @Creality CR-6 0.6.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.32mm Chunky @Creality CR-6 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.6",
+    "initial_layer_print_height": "0.32",
+    "inner_wall_line_width": "0.6",
+    "internal_solid_infill_line_width": "0.6",
+    "layer_height": "0.32",
+    "line_width": "0.6",
+    "outer_wall_line_width": "0.6",
+    "sparse_infill_line_width": "0.6",
+    "support_line_width": "0.6",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.6",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.6 nozzle",
+        "Creality CR-6 Max 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json b/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json
new file mode 100644
index 0000000..5a7ee8c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.32mm Optimal @Creality K1 (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.32",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.32",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json b/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json
new file mode 100644
index 0000000..98fac8f
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.32mm Optimal @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.32",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.32",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1C 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json b/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json
new file mode 100644
index 0000000..89b73e4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.32mm Optimal @Creality K1Max (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.32",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.32",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json b/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json
new file mode 100644
index 0000000..eeeb765
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.8 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.82",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.82",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.32",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.82",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.3",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.32mm Standard @Creality CR-6 0.8.json b/OrcaSlicer/system/Creality/process/0.32mm Standard @Creality CR-6 0.8.json
new file mode 100644
index 0000000..16078c5
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.32mm Standard @Creality CR-6 0.8.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.32mm Standard @Creality CR-6 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.8",
+    "initial_layer_print_height": "0.32",
+    "inner_wall_line_width": "0.8",
+    "internal_solid_infill_line_width": "0.8",
+    "layer_height": "0.32",
+    "line_width": "0.8",
+    "outer_wall_line_width": "0.8",
+    "sparse_infill_line_width": "0.8",
+    "support_line_width": "0.8",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.8",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.8 nozzle",
+        "Creality CR-6 Max 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json b/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json
new file mode 100644
index 0000000..3e73410
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.5",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_5",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.36"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json b/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json
new file mode 100644
index 0000000..7c81913
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_6",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.36"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json b/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json
new file mode 100644
index 0000000..e1a07cf
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_0_8",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.36"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json b/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json
new file mode 100644
index 0000000..48d513d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Chunky @Creality Ender5Pro (2019) 1.0",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common_1_0",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "layer_height": "0.36"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json
new file mode 100644
index 0000000..3b5645d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality Ender-3 V3",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.36",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.36",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality Ender-3 V3 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json
new file mode 100644
index 0000000..84a6cc4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality Ender-3 V3 Plus",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.36",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.36",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "8000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality Ender-3 V3 Plus 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json
new file mode 100644
index 0000000..ca37492
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json	
@@ -0,0 +1,125 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality Hi",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality Hi 0.6 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.36",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.36",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "tree(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "35",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "default_jerk": "12",
+    "outer_wall_jerk": "8",
+    "inner_wall_jerk": "8",
+    "infill_jerk": "12",
+    "top_surface_jerk": "8",
+    "initial_layer_jerk": "8",
+    "travel_jerk": "12"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json
new file mode 100644
index 0000000..eab36cf
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality K1 (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.36",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.36",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json
new file mode 100644
index 0000000..90b3efd
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.36",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.36",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1C 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json
new file mode 100644
index 0000000..84ff502
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality K1Max (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.36",
+    "initial_layer_speed": "50",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.36",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.62",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json
new file mode 100644
index 0000000..30de178
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.6 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.65",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.36",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.36mm SuperChunky @Creality CR-6 0.6.json b/OrcaSlicer/system/Creality/process/0.36mm SuperChunky @Creality CR-6 0.6.json
new file mode 100644
index 0000000..1e0a67d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.36mm SuperChunky @Creality CR-6 0.6.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm SuperChunky @Creality CR-6 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.6",
+    "initial_layer_print_height": "0.3",
+    "inner_wall_line_width": "0.6",
+    "internal_solid_infill_line_width": "0.6",
+    "layer_height": "0.36",
+    "line_width": "0.6",
+    "outer_wall_line_width": "0.6",
+    "sparse_infill_line_width": "0.6",
+    "support_line_width": "0.6",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.6",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.6 nozzle",
+        "Creality CR-6 Max 0.6 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.40mm Draft @Creality CR-6 0.8.json b/OrcaSlicer/system/Creality/process/0.40mm Draft @Creality CR-6 0.8.json
new file mode 100644
index 0000000..ce75cc9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.40mm Draft @Creality CR-6 0.8.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.40mm Draft @Creality CR-6 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.8",
+    "initial_layer_print_height": "0.4",
+    "inner_wall_line_width": "0.8",
+    "internal_solid_infill_line_width": "0.8",
+    "layer_height": "0.4",
+    "line_width": "0.8",
+    "outer_wall_line_width": "0.8",
+    "sparse_infill_line_width": "0.8",
+    "support_line_width": "0.8",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.8",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.8 nozzle",
+        "Creality CR-6 Max 0.8 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json b/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json
new file mode 100644
index 0000000..990930d
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.40mm Standard @Creality K1 (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.4",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json b/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json
new file mode 100644
index 0000000..3b8a82e
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.40mm Standard @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.4",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1C 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json b/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json
new file mode 100644
index 0000000..f26b553
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.4",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json b/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json
new file mode 100644
index 0000000..593e118
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.8 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.82",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.82",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.4",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.82",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.3",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json b/OrcaSlicer/system/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json
new file mode 100644
index 0000000..2b765d1
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.6 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.62",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.62",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.65",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.65",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.42",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.65",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.62",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json b/OrcaSlicer/system/Creality/process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json
new file mode 100644
index 0000000..2b933ba
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.44mm SuperExtraChunky @Creality CR-6 0.6",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.6",
+    "initial_layer_print_height": "0.3",
+    "inner_wall_line_width": "0.6",
+    "internal_solid_infill_line_width": "0.6",
+    "layer_height": "0.44",
+    "line_width": "0.6",
+    "outer_wall_line_width": "0.6",
+    "sparse_infill_line_width": "0.6",
+    "support_line_width": "0.6",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.6",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.6 nozzle",
+        "Creality CR-6 Max 0.6 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.48mm Chunky @Creality CR-6 0.8.json b/OrcaSlicer/system/Creality/process/0.48mm Chunky @Creality CR-6 0.8.json
new file mode 100644
index 0000000..e63b479
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.48mm Chunky @Creality CR-6 0.8.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.48mm Chunky @Creality CR-6 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.8",
+    "initial_layer_print_height": "0.48",
+    "inner_wall_line_width": "0.8",
+    "internal_solid_infill_line_width": "0.8",
+    "layer_height": "0.4",
+    "line_width": "0.8",
+    "outer_wall_line_width": "0.8",
+    "sparse_infill_line_width": "0.8",
+    "support_line_width": "0.8",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.8",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.8 nozzle",
+        "Creality CR-6 Max 0.8 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality CR-6 0.8.json b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality CR-6 0.8.json
new file mode 100644
index 0000000..d39aa26
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality CR-6 0.8.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.48mm Draft @Creality CR-6 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.8",
+    "initial_layer_print_height": "0.48",
+    "inner_wall_line_width": "0.8",
+    "internal_solid_infill_line_width": "0.8",
+    "layer_height": "0.48",
+    "line_width": "0.8",
+    "outer_wall_line_width": "0.8",
+    "sparse_infill_line_width": "0.8",
+    "support_line_width": "0.8",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.8",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.8 nozzle",
+        "Creality CR-6 Max 0.8 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json
new file mode 100644
index 0000000..e1ae636
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.48mm Draft @Creality K1 (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.48",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.48",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json
new file mode 100644
index 0000000..16b2432
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.48mm Draft @Creality K1C",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.48",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.48",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1C 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json
new file mode 100644
index 0000000..44047d1
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json	
@@ -0,0 +1,117 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.48mm Draft @Creality K1Max (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "30",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "120",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.7",
+    "initial_layer_print_height": "0.48",
+    "initial_layer_speed": "35",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.85",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "150",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.48",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.85",
+    "inner_wall_speed": "150",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "55",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.82",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "150",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json
new file mode 100644
index 0000000..32090d3
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.8 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.82",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.82",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.48",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.82",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.3",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/0.56mm SuperChunky @Creality CR-6 0.8.json b/OrcaSlicer/system/Creality/process/0.56mm SuperChunky @Creality CR-6 0.8.json
new file mode 100644
index 0000000..e823088
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.56mm SuperChunky @Creality CR-6 0.8.json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.56mm SuperChunky @Creality CR-6 0.8",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_creality_common",
+    "initial_layer_line_width": "0.8",
+    "initial_layer_print_height": "0.4",
+    "inner_wall_line_width": "0.8",
+    "internal_solid_infill_line_width": "0.8",
+    "layer_height": "0.56",
+    "line_width": "0.8",
+    "outer_wall_line_width": "0.8",
+    "sparse_infill_line_width": "0.8",
+    "support_line_width": "0.8",
+    "top_shell_layers": "4",
+    "top_surface_line_width": "0.8",
+    "compatible_printers": [
+        "Creality CR-6 SE 0.8 nozzle",
+        "Creality CR-6 Max 0.8 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json b/OrcaSlicer/system/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json
new file mode 100644
index 0000000..6fe45f8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json	
@@ -0,0 +1,110 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K2 Plus 0.8 nozzle"
+    ],
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": "100",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.82",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.82",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": "40",
+    "gap_infill_speed": "50",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.82",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "120",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.56",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
+    "inner_wall_line_width": "0.82",
+    "inner_wall_speed": "150",
+    "wall_loops": "2",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.6",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.3",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.82",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "100",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_common.json b/OrcaSlicer/system/Creality/process/fdm_process_common.json
new file mode 100644
index 0000000..1da14b4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_common.json
@@ -0,0 +1,70 @@
+{
+    "type": "process",
+    "name": "fdm_process_common",
+    "from": "system",
+    "instantiation": "false",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "compatible_printers": [],
+    "print_sequence": "by layer",
+    "default_acceleration": "10000",
+    "bridge_no_support": "0",
+    "elefant_foot_compensation": "0.1",
+    "outer_wall_line_width": "0.4",
+    "outer_wall_speed": "120",
+    "line_width": "0.45",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "20",
+    "gap_infill_speed": "30",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "25%",
+    "sparse_infill_speed": "50",
+    "interface_shells": "0",
+    "detect_overhang_wall": "0",
+    "reduce_infill_retraction": "0",
+    "filename_format": "{input_filename_base}.gcode",
+    "wall_loops": "3",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "40",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "nearest",
+    "skirt_distance": "2",
+    "skirt_height": "2",
+    "minimum_sparse_infill_area": "0",
+    "internal_solid_infill_line_width": "0.45",
+    "internal_solid_infill_speed": "40",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_filament": "0",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.15",
+    "support_interface_loop_pattern": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_spacing": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2",
+    "support_speed": "40",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.5",
+    "detect_thin_wall": "0",
+    "top_surface_line_width": "0.4",
+    "top_surface_speed": "30",
+    "travel_speed": "400",
+    "enable_prime_tower": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0"
+}
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_common_klipper.json b/OrcaSlicer/system/Creality/process/fdm_process_common_klipper.json
new file mode 100644
index 0000000..303888b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_common_klipper.json
@@ -0,0 +1,16 @@
+{
+    "type": "process",
+    "name": "fdm_process_common_klipper",
+    "from": "system",
+	"inherits": "fdm_process_creality_common",
+    "instantiation": "false",
+    "default_jerk": "9",
+    "initial_layer_jerk": "9",
+    "outer_wall_jerk": "7",
+    "infill_jerk": "12",
+    "travel_jerk": "12",
+    "inner_wall_jerk": "7",
+    "top_surface_jerk": "7",
+    "exclude_object": "1"
+
+}
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_creality_common.json b/OrcaSlicer/system/Creality/process/fdm_process_creality_common.json
new file mode 100644
index 0000000..6709f4c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_creality_common.json
@@ -0,0 +1,104 @@
+{
+    "type": "process",
+    "name": "fdm_process_creality_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_common",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "500",
+    "top_surface_acceleration": "500",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "700",
+    "inner_wall_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "23%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "1",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "20",
+    "outer_wall_speed": "25",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "30",
+    "gap_infill_speed": "30",
+    "sparse_infill_speed": "50",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0"
+}
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_2.json b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_2.json
new file mode 100644
index 0000000..eb28a2b
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_2.json
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "name": "fdm_process_creality_common_0_2",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_creality_common",
+    "outer_wall_line_width": "0.2",
+    "line_width": "0.22",
+    "initial_layer_line_width": "0.2",
+    "sparse_infill_line_width": "0.22",
+    "inner_wall_line_width": "0.22",
+    "internal_solid_infill_line_width": "0.22",
+    "support_line_width": "0.18",
+    "top_surface_line_width": "0.2",
+    "initial_layer_print_height": "0.12",
+    "wall_loops": "6",
+    "compatible_printers": [
+        "Creality Ender-5 Pro (2019) 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_25.json b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_25.json
new file mode 100644
index 0000000..94b5cb9
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_25.json
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "name": "fdm_process_creality_common_0_25",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_creality_common",
+    "outer_wall_line_width": "0.26",
+    "line_width": "0.28",
+    "initial_layer_line_width": "0.26",
+    "sparse_infill_line_width": "0.28",
+    "inner_wall_line_width": "0.28",
+    "internal_solid_infill_line_width": "0.28",
+    "support_line_width": "0.23",
+    "top_surface_line_width": "0.25",
+    "initial_layer_print_height": "0.12",
+    "wall_loops": "5",
+    "compatible_printers": [
+        "Creality Ender-5 Pro (2019) 0.25 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_3.json b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_3.json
new file mode 100644
index 0000000..26d05e8
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_3.json
@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "name": "fdm_process_creality_common_0_3",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_creality_common",
+    "outer_wall_line_width": "0.31",
+    "line_width": "0.33",
+    "initial_layer_line_width": "0.31",
+    "sparse_infill_line_width": "0.33",
+    "inner_wall_line_width": "0.33",
+    "internal_solid_infill_line_width": "0.33",
+    "support_line_width": "0.27",
+    "top_surface_line_width": "0.3",
+    "wall_loops": "4",
+    "compatible_printers": [
+        "Creality Ender-5 Pro (2019) 0.3 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_5.json b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_5.json
new file mode 100644
index 0000000..26a11b4
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_5.json
@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "name": "fdm_process_creality_common_0_5",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_creality_common",
+    "outer_wall_line_width": "0.52",
+    "line_width": "0.55",
+    "initial_layer_line_width": "0.52",
+    "sparse_infill_line_width": "0.55",
+    "inner_wall_line_width": "0.55",
+    "internal_solid_infill_line_width": "0.55",
+    "support_line_width": "0.45",
+    "top_surface_line_width": "0.5",
+    "wall_loops": "3",
+    "compatible_printers": [
+        "Creality Ender-5 Pro (2019) 0.5 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_6.json b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_6.json
new file mode 100644
index 0000000..ca184e0
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_6.json
@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "name": "fdm_process_creality_common_0_6",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_creality_common",
+    "outer_wall_line_width": "0.63",
+    "line_width": "0.66",
+    "initial_layer_line_width": "0.63",
+    "sparse_infill_line_width": "0.66",
+    "inner_wall_line_width": "0.66",
+    "internal_solid_infill_line_width": "0.66",
+    "support_line_width": "0.54",
+    "top_surface_line_width": "0.6",
+    "wall_loops": "2",
+    "compatible_printers": [
+        "Creality Ender-5 Pro (2019) 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_8.json b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_8.json
new file mode 100644
index 0000000..b7f6a48
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_8.json
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "name": "fdm_process_creality_common_0_8",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_creality_common",
+    "outer_wall_line_width": "0.84",
+    "line_width": "0.88",
+    "initial_layer_line_width": "0.84",
+    "sparse_infill_line_width": "0.88",
+    "inner_wall_line_width": "0.88",
+    "internal_solid_infill_line_width": "0.88",
+    "support_line_width": "0.72",
+    "top_surface_line_width": "0.8",
+    "initial_layer_print_height": "0.32",
+    "wall_loops": "2",
+    "compatible_printers": [
+        "Creality Ender-5 Pro (2019) 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Creality/process/fdm_process_creality_common_1_0.json b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_1_0.json
new file mode 100644
index 0000000..926033c
--- /dev/null
+++ b/OrcaSlicer/system/Creality/process/fdm_process_creality_common_1_0.json
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "name": "fdm_process_creality_common_1_0",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_creality_common",
+    "outer_wall_line_width": "1.05",
+    "line_width": "1.10",
+    "initial_layer_line_width": "1.05",
+    "sparse_infill_line_width": "1.10",
+    "inner_wall_line_width": "1.10",
+    "internal_solid_infill_line_width": "1.10",
+    "support_line_width": "0.9",
+    "top_surface_line_width": "1.0",
+    "initial_layer_print_height": "0.32",
+    "wall_loops": "1",
+    "compatible_printers": [
+        "Creality Ender-5 Pro (2019) 1.0 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom.json b/OrcaSlicer/system/Custom.json
new file mode 100644
index 0000000..e760d4b
--- /dev/null
+++ b/OrcaSlicer/system/Custom.json
@@ -0,0 +1,274 @@
+{
+    "name": "Custom Printer",
+    "version":  "02.03.00.03",
+    "force_update": "0",
+    "description": "My configurations",
+    "machine_model_list": [
+        {
+            "name": "Generic Klipper Printer",
+            "sub_path": "machine/MyKlipper.json"
+        },
+        {
+            "name": "Generic Marlin Printer",
+            "sub_path": "machine/MyMarlin.json"
+        },
+        {
+            "name": "Generic RRF Printer",
+            "sub_path": "machine/MyRRF.json"
+        },
+        {
+            "name": "Generic ToolChanger Printer",
+            "sub_path": "machine/MyToolChanger.json"
+        }
+    ],
+    "process_list": [
+        {
+            "name": "fdm_process_common",
+            "sub_path": "process/fdm_process_common.json"
+        },
+        {
+            "name": "fdm_process_klipper_common",
+            "sub_path": "process/fdm_process_klipper_common.json"
+        },
+        {
+            "name": "fdm_process_rrf_common",
+            "sub_path": "process/fdm_process_rrf_common.json"
+        },
+        {
+            "name": "fdm_process_marlin_common",
+            "sub_path": "process/fdm_process_marlin_common.json"
+        },
+        {
+            "name": "fdm_process_mytoolchanger_common",
+            "sub_path": "process/fdm_process_mytoolchanger_common.json"
+        },
+        {
+            "name": "0.08mm Extra Fine @MyKlipper",
+            "sub_path": "process/0.08mm Extra Fine @MyKlipper.json"
+        },
+        {
+            "name": "0.12mm Fine @MyKlipper",
+            "sub_path": "process/0.12mm Fine @MyKlipper.json"
+        },
+        {
+            "name": "0.15mm Optimal @MyKlipper",
+            "sub_path": "process/0.15mm Optimal @MyKlipper.json"
+        },
+        {
+            "name": "0.16mm Optimal @MyKlipper",
+            "sub_path": "process/0.16mm Optimal @MyKlipper.json"
+        },
+        {
+            "name": "0.20mm Standard @MyKlipper",
+            "sub_path": "process/0.20mm Standard @MyKlipper.json"
+        },
+        {
+            "name": "0.24mm Draft @MyKlipper",
+            "sub_path": "process/0.24mm Draft @MyKlipper.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @MyKlipper",
+            "sub_path": "process/0.28mm Extra Draft @MyKlipper.json"
+        },
+        {
+            "name": "0.32mm Extra Draft @MyKlipper",
+            "sub_path": "process/0.32mm Extra Draft @MyKlipper.json"
+        },
+        {
+            "name": "0.40mm Extra Draft @MyKlipper",
+            "sub_path": "process/0.40mm Extra Draft @MyKlipper.json"
+        },
+        {
+            "name": "0.56mm Extra Draft @MyKlipper",
+            "sub_path": "process/0.56mm Extra Draft @MyKlipper.json"
+        },
+        {
+            "name": "0.08mm Extra Fine @MyRRF",
+            "sub_path": "process/0.08mm Extra Fine @MyRRF.json"
+        },
+        {
+            "name": "0.12mm Fine @MyRRF",
+            "sub_path": "process/0.12mm Fine @MyRRF.json"
+        },
+        {
+            "name": "0.15mm Optimal @MyRRF",
+            "sub_path": "process/0.15mm Optimal @MyRRF.json"
+        },
+        {
+            "name": "0.20mm Standard @MyRRF",
+            "sub_path": "process/0.20mm Standard @MyRRF.json"
+        },
+        {
+            "name": "0.24mm Draft @MyRRF",
+            "sub_path": "process/0.24mm Draft @MyRRF.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @MyRRF",
+            "sub_path": "process/0.28mm Extra Draft @MyRRF.json"
+        },
+        {
+            "name": "0.08mm Extra Fine @MyMarlin",
+            "sub_path": "process/0.08mm Extra Fine @MyMarlin.json"
+        },
+        {
+            "name": "0.12mm Fine @MyMarlin",
+            "sub_path": "process/0.12mm Fine @MyMarlin.json"
+        },
+        {
+            "name": "0.15mm Optimal @MyMarlin",
+            "sub_path": "process/0.15mm Optimal @MyMarlin.json"
+        },
+        {
+            "name": "0.20mm Standard @MyMarlin",
+            "sub_path": "process/0.20mm Standard @MyMarlin.json"
+        },
+        {
+            "name": "0.24mm Draft @MyMarlin",
+            "sub_path": "process/0.24mm Draft @MyMarlin.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @MyMarlin",
+            "sub_path": "process/0.28mm Extra Draft @MyMarlin.json"
+        },
+        {
+            "name": "0.08mm Extra Fine @MyToolChanger",
+            "sub_path": "process/0.08mm Extra Fine @MyToolChanger.json"
+        },
+        {
+            "name": "0.12mm Fine @MyToolChanger",
+            "sub_path": "process/0.12mm Fine @MyToolChanger.json"
+        },
+        {
+            "name": "0.15mm Optimal @MyToolChanger",
+            "sub_path": "process/0.15mm Optimal @MyToolChanger.json"
+        },
+        {
+            "name": "0.16mm Optimal @MyToolChanger",
+            "sub_path": "process/0.16mm Optimal @MyToolChanger.json"
+        },
+        {
+            "name": "0.20mm Standard @MyToolChanger",
+            "sub_path": "process/0.20mm Standard @MyToolChanger.json"
+        },
+        {
+            "name": "0.24mm Draft @MyToolChanger",
+            "sub_path": "process/0.24mm Draft @MyToolChanger.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @MyToolChanger",
+            "sub_path": "process/0.28mm Extra Draft @MyToolChanger.json"
+        },
+        {
+            "name": "0.32mm Extra Draft @MyToolChanger",
+            "sub_path": "process/0.32mm Extra Draft @MyToolChanger.json"
+        },
+        {
+            "name": "0.40mm Extra Draft @MyToolChanger",
+            "sub_path": "process/0.40mm Extra Draft @MyToolChanger.json"
+        },
+        {
+            "name": "0.56mm Extra Draft @MyToolChanger",
+            "sub_path": "process/0.56mm Extra Draft @MyToolChanger.json"
+        }
+    ],
+    "filament_list": [
+        {
+            "name": "Generic PLA @MyToolChanger",
+            "sub_path": "filament/Generic PLA @MyToolChanger.json"
+        },
+        {
+            "name": "Generic PLA-CF @MyToolChanger",
+            "sub_path": "filament/Generic PLA-CF @MyToolChanger.json"
+        },
+        {
+            "name": "Generic PETG @MyToolChanger",
+            "sub_path": "filament/Generic PETG @MyToolChanger.json"
+        },
+        {
+            "name": "Generic ABS @MyToolChanger",
+            "sub_path": "filament/Generic ABS @MyToolChanger.json"
+        },
+        {
+            "name": "Generic TPU @MyToolChanger",
+            "sub_path": "filament/Generic TPU @MyToolChanger.json"
+        },
+        {
+            "name": "Generic ASA @MyToolChanger",
+            "sub_path": "filament/Generic ASA @MyToolChanger.json"
+        },
+        {
+            "name": "Generic PC @MyToolChanger",
+            "sub_path": "filament/Generic PC @MyToolChanger.json"
+        },
+        {
+            "name": "Generic PVA @MyToolChanger",
+            "sub_path": "filament/Generic PVA @MyToolChanger.json"
+        },
+        {
+            "name": "Generic PA @MyToolChanger",
+            "sub_path": "filament/Generic PA @MyToolChanger.json"
+        },
+        {
+            "name": "Generic PA-CF @MyToolChanger",
+            "sub_path": "filament/Generic PA-CF @MyToolChanger.json"
+        }
+    ],
+    "machine_list": [
+        {
+            "name": "fdm_machine_common",
+            "sub_path": "machine/fdm_machine_common.json"
+        },
+        {
+            "name": "fdm_klipper_common",
+            "sub_path": "machine/fdm_klipper_common.json"
+        },
+        {
+            "name": "fdm_rrf_common",
+            "sub_path": "machine/fdm_rrf_common.json"
+        },
+        {
+            "name": "fdm_toolchanger_common",
+            "sub_path": "machine/fdm_toolchanger_common.json"
+        },
+        {
+            "name": "MyKlipper 0.4 nozzle",
+            "sub_path": "machine/MyKlipper 0.4 nozzle.json"
+        },
+        {
+            "name": "MyKlipper 0.2 nozzle",
+            "sub_path": "machine/MyKlipper 0.2 nozzle.json"
+        },
+        {
+            "name": "MyKlipper 0.6 nozzle",
+            "sub_path": "machine/MyKlipper 0.6 nozzle.json"
+        },
+        {
+            "name": "MyKlipper 0.8 nozzle",
+            "sub_path": "machine/MyKlipper 0.8 nozzle.json"
+        },
+        {
+            "name": "MyMarlin 0.4 nozzle",
+            "sub_path": "machine/MyMarlin 0.4 nozzle.json"
+        },
+        {
+            "name": "MyRRF 0.4 nozzle",
+            "sub_path": "machine/MyRRF 0.4 nozzle.json"
+        },
+        {
+            "name": "MyToolChanger 0.4 nozzle",
+            "sub_path": "machine/MyToolChanger 0.4 nozzle.json"
+        },
+        {
+            "name": "MyToolChanger 0.2 nozzle",
+            "sub_path": "machine/MyToolChanger 0.2 nozzle.json"
+        },
+        {
+            "name": "MyToolChanger 0.6 nozzle",
+            "sub_path": "machine/MyToolChanger 0.6 nozzle.json"
+        },
+        {
+            "name": "MyToolChanger 0.8 nozzle",
+            "sub_path": "machine/MyToolChanger 0.8 nozzle.json"
+        }
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic ABS @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic ABS @MyToolChanger.json
new file mode 100644
index 0000000..23238a1
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic ABS @MyToolChanger.json	
@@ -0,0 +1,51 @@
+{
+    "type": "filament",
+    "setting_id": "GFB99_MTC_0",
+    "name": "Generic ABS @MyToolChanger",
+    "renamed_from": "My Generic ABS @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ABS @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic ASA @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic ASA @MyToolChanger.json
new file mode 100644
index 0000000..28f13fc
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic ASA @MyToolChanger.json	
@@ -0,0 +1,51 @@
+{
+    "type": "filament",
+    "setting_id": "GFB98_MTC_0",
+    "name": "Generic ASA @MyToolChanger",
+    "renamed_from": "My Generic ASA @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ASA @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic PA @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic PA @MyToolChanger.json
new file mode 100644
index 0000000..76ab962
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic PA @MyToolChanger.json	
@@ -0,0 +1,51 @@
+{
+    "type": "filament",
+    "setting_id": "GFN99_MTC_0",
+    "name": "Generic PA @MyToolChanger",
+    "renamed_from": "My Generic PA @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PA @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic PA-CF @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic PA-CF @MyToolChanger.json
new file mode 100644
index 0000000..a0dfaa0
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic PA-CF @MyToolChanger.json	
@@ -0,0 +1,51 @@
+{
+    "type": "filament",
+    "setting_id": "GFN98_MTC_0",
+    "name": "Generic PA-CF @MyToolChanger",
+    "renamed_from": "My Generic PA-CF @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PA-CF @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic PC @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic PC @MyToolChanger.json
new file mode 100644
index 0000000..0ff6bee
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic PC @MyToolChanger.json	
@@ -0,0 +1,52 @@
+{
+    "type": "filament",
+    "filament_id": "GFC99",
+    "setting_id": "GFC99_MTC_0",
+    "name": "Generic PC @MyToolChanger",
+    "renamed_from": "My Generic PC @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PC @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic PETG @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic PETG @MyToolChanger.json
new file mode 100644
index 0000000..27f0c96
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic PETG @MyToolChanger.json	
@@ -0,0 +1,52 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFG99_MTC_0",
+    "name": "Generic PETG @MyToolChanger",
+    "renamed_from": "My Generic PETG @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PETG @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic PLA @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic PLA @MyToolChanger.json
new file mode 100644
index 0000000..ef24ac2
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic PLA @MyToolChanger.json	
@@ -0,0 +1,52 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFL99_MTC_0",
+    "name": "Generic PLA @MyToolChanger",
+    "renamed_from": "My Generic PLA @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic PLA-CF @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic PLA-CF @MyToolChanger.json
new file mode 100644
index 0000000..8be0250
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic PLA-CF @MyToolChanger.json	
@@ -0,0 +1,52 @@
+{
+    "type": "filament",
+    "filament_id": "GFL98",
+    "setting_id": "GFL98_MTC_0",
+    "name": "Generic PLA-CF @MyToolChanger",
+    "renamed_from": "My Generic PLA-CF @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA-CF @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic PVA @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic PVA @MyToolChanger.json
new file mode 100644
index 0000000..acb5e84
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic PVA @MyToolChanger.json	
@@ -0,0 +1,52 @@
+{
+    "type": "filament",
+    "filament_id": "GFS99",
+    "setting_id": "GFS99_MTC_0",
+    "name": "Generic PVA @MyToolChanger",
+    "renamed_from": "My Generic PVA @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PVA @System",
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_load_time": [
+        "10.5"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_unload_time": [
+        "8.5"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/filament/Generic TPU @MyToolChanger.json b/OrcaSlicer/system/Custom/filament/Generic TPU @MyToolChanger.json
new file mode 100644
index 0000000..1f207dc
--- /dev/null
+++ b/OrcaSlicer/system/Custom/filament/Generic TPU @MyToolChanger.json	
@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "filament_id": "GFU99",
+    "setting_id": "GFU99_MTC_0",
+    "name": "Generic TPU @MyToolChanger",
+    "renamed_from": "My Generic TPU @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic TPU @System",
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyKlipper 0.2 nozzle.json b/OrcaSlicer/system/Custom/machine/MyKlipper 0.2 nozzle.json
new file mode 100644
index 0000000..1ec29c6
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyKlipper 0.2 nozzle.json	
@@ -0,0 +1,26 @@
+{
+    "type": "machine",
+    "setting_id": "GM002",
+    "name": "MyKlipper 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_klipper_common",
+    "printer_model": "Generic Klipper Printer",
+    "nozzle_diameter": [
+        "0.2"
+    ],
+    "max_layer_height": [
+        "0.16"
+    ],
+    "min_layer_height": [
+        "0.04"
+    ],
+    "printer_variant": "0.2",
+    "printable_area": [
+        "0x0",
+        "250x0",
+        "250x250",
+        "0x250"
+    ],
+    "printable_height": "250"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyKlipper 0.4 nozzle.json b/OrcaSlicer/system/Custom/machine/MyKlipper 0.4 nozzle.json
new file mode 100644
index 0000000..c2de0ec
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyKlipper 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "MyKlipper 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_klipper_common",
+    "printer_model": "Generic Klipper Printer",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "250x0",
+        "250x250",
+        "0x250"
+    ],
+    "printable_height": "250"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyKlipper 0.6 nozzle.json b/OrcaSlicer/system/Custom/machine/MyKlipper 0.6 nozzle.json
new file mode 100644
index 0000000..9240467
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyKlipper 0.6 nozzle.json	
@@ -0,0 +1,26 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "MyKlipper 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_klipper_common",
+    "printer_model": "Generic Klipper Printer",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "max_layer_height": [
+        "0.4"
+    ],
+    "min_layer_height": [
+        "0.12"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "250x0",
+        "250x250",
+        "0x250"
+    ],
+    "printable_height": "250"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyKlipper 0.8 nozzle.json b/OrcaSlicer/system/Custom/machine/MyKlipper 0.8 nozzle.json
new file mode 100644
index 0000000..be658b0
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyKlipper 0.8 nozzle.json	
@@ -0,0 +1,26 @@
+{
+    "type": "machine",
+    "setting_id": "GM004",
+    "name": "MyKlipper 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_klipper_common",
+    "printer_model": "Generic Klipper Printer",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "max_layer_height": [
+        "0.6"
+    ],
+    "min_layer_height": [
+        "0.2"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "250x0",
+        "250x250",
+        "0x250"
+    ],
+    "printable_height": "250"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyKlipper.json b/OrcaSlicer/system/Custom/machine/MyKlipper.json
new file mode 100644
index 0000000..9f909d3
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyKlipper.json
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Generic Klipper Printer",
+    "model_id": "my_klipper_01",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "MyPrinter",
+    "bed_model": "",
+    "bed_texture": "orcaslicer_bed_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}
diff --git a/OrcaSlicer/system/Custom/machine/MyMarlin 0.4 nozzle.json b/OrcaSlicer/system/Custom/machine/MyMarlin 0.4 nozzle.json
new file mode 100644
index 0000000..2558183
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyMarlin 0.4 nozzle.json	
@@ -0,0 +1,44 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "MyMarlin 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "Generic Marlin Printer",
+    "gcode_flavor": "marlin",
+    "machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors",
+    "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "retraction_length": [
+        "0.9"
+    ],
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retraction_speed": [
+        "45"
+    ],
+    "deretraction_speed": [
+        "35"
+    ],
+    "version": "1.5.1.2",
+    "wipe": [
+        "0"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printable_area": [
+        "0x0",
+        "250x0",
+        "250x250",
+        "0x250"
+    ],
+    "printable_height": "250"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyMarlin.json b/OrcaSlicer/system/Custom/machine/MyMarlin.json
new file mode 100644
index 0000000..afd744e
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyMarlin.json
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Generic Marlin Printer",
+    "model_id": "my_marlin_01",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "MyPrinter",
+    "bed_model": "",
+    "bed_texture": "orcaslicer_bed_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}
diff --git a/OrcaSlicer/system/Custom/machine/MyRRF 0.4 nozzle.json b/OrcaSlicer/system/Custom/machine/MyRRF 0.4 nozzle.json
new file mode 100644
index 0000000..3a204d7
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyRRF 0.4 nozzle.json	
@@ -0,0 +1,19 @@
+{
+  "type": "machine",
+  "setting_id": "GM003",
+  "name": "MyRRF 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_rrf_common",
+  "printer_model": "Generic RRF Printer",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_area": [
+    "0x0",
+    "250x0",
+    "250x250",
+    "0x250"
+  ],
+  "printable_height": "250"
+}
diff --git a/OrcaSlicer/system/Custom/machine/MyRRF.json b/OrcaSlicer/system/Custom/machine/MyRRF.json
new file mode 100644
index 0000000..c830e20
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyRRF.json
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Generic RRF Printer",
+    "model_id": "my_rrf_01",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "MyPrinter",
+    "bed_model": "",
+    "bed_texture": "orcaslicer_bed_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyToolChanger 0.2 nozzle.json b/OrcaSlicer/system/Custom/machine/MyToolChanger 0.2 nozzle.json
new file mode 100644
index 0000000..f23384a
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyToolChanger 0.2 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "machine",
+    "setting_id": "GM_CUSTOM_001",
+    "name": "MyToolChanger 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_toolchanger_common",
+    "printer_model": "Generic ToolChanger Printer",
+    "nozzle_diameter": [
+        "0.2",
+        "0.2",
+        "0.2",
+        "0.2",
+        "0.2"
+    ],
+    "max_layer_height": [
+        "0.16"
+    ],
+    "min_layer_height": [
+        "0.04"
+    ],
+    "printer_variant": "0.2",
+    "printable_area": [
+        "0x0",
+        "350x0",
+        "350x350",
+        "0x350"
+    ],
+    "printable_height": "300"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyToolChanger 0.4 nozzle.json b/OrcaSlicer/system/Custom/machine/MyToolChanger 0.4 nozzle.json
new file mode 100644
index 0000000..cf43dd0
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyToolChanger 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "machine",
+    "setting_id": "GM_CUSTOM_002",
+    "name": "MyToolChanger 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_toolchanger_common",
+    "printer_model": "Generic ToolChanger Printer",
+    "nozzle_diameter": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "350x0",
+        "350x350",
+        "0x350"
+    ],
+    "printable_height": "300"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyToolChanger 0.6 nozzle.json b/OrcaSlicer/system/Custom/machine/MyToolChanger 0.6 nozzle.json
new file mode 100644
index 0000000..b8d3875
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyToolChanger 0.6 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "machine",
+    "setting_id": "GM_CUSTOM_003",
+    "name": "MyToolChanger 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_toolchanger_common",
+    "printer_model": "Generic ToolChanger Printer",
+    "nozzle_diameter": [
+        "0.6",
+        "0.6",
+        "0.6",
+        "0.6",
+        "0.6"
+    ],
+    "max_layer_height": [
+        "0.4"
+    ],
+    "min_layer_height": [
+        "0.12"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "350x0",
+        "350x350",
+        "0x350"
+    ],
+    "printable_height": "300"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyToolChanger 0.8 nozzle.json b/OrcaSlicer/system/Custom/machine/MyToolChanger 0.8 nozzle.json
new file mode 100644
index 0000000..2ce7029
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyToolChanger 0.8 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "machine",
+    "setting_id": "GM_CUSTOM_004",
+    "name": "MyToolChanger 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_toolchanger_common",
+    "printer_model": "Generic ToolChanger Printer",
+    "nozzle_diameter": [
+        "0.8",
+        "0.8",
+        "0.8",
+        "0.8",
+        "0.8"
+    ],
+    "max_layer_height": [
+        "0.6"
+    ],
+    "min_layer_height": [
+        "0.2"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "350x0",
+        "350x350",
+        "0x350"
+    ],
+    "printable_height": "300"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/MyToolChanger.json b/OrcaSlicer/system/Custom/machine/MyToolChanger.json
new file mode 100644
index 0000000..97b29c9
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/MyToolChanger.json
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Generic ToolChanger Printer",
+    "model_id": "my_toolchanger_01",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "MyPrinter",
+    "bed_model": "Custom_350_bed.stl",
+    "bed_texture": "orcaslicer_bed_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Generic PLA @MyToolChanger;Generic ABS @MyToolChanger;Generic PLA-CF @MyToolChanger;Generic PETG @MyToolChanger;Generic TPU @MyToolChanger;Generic ASA @MyToolChanger;Generic PC @MyToolChanger;Generic PVA @MyToolChanger;Generic PA @MyToolChanger;Generic PA-CF @MyToolChanger"
+}
diff --git a/OrcaSlicer/system/Custom/machine/fdm_klipper_common.json b/OrcaSlicer/system/Custom/machine/fdm_klipper_common.json
new file mode 100644
index 0000000..9ba6b51
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/fdm_klipper_common.json
@@ -0,0 +1,60 @@
+{
+  "type": "machine",
+  "name": "fdm_klipper_common",
+  "from": "system",
+  "instantiation": "false",
+  "inherits": "fdm_machine_common",
+  "gcode_flavor": "klipper",
+  "machine_max_acceleration_e": ["5000", "5000"],
+  "machine_max_acceleration_extruding": ["20000", "20000"],
+  "machine_max_acceleration_retracting": ["5000", "5000"],
+  "machine_max_acceleration_travel": ["20000", "20000"],
+  "machine_max_acceleration_x": ["20000", "20000"],
+  "machine_max_acceleration_y": ["20000", "20000"],
+  "machine_max_acceleration_z": ["500", "200"],
+  "machine_max_speed_e": ["25", "25"],
+  "machine_max_speed_x": ["500", "200"],
+  "machine_max_speed_y": ["500", "200"],
+  "machine_max_speed_z": ["12", "12"],
+  "machine_max_jerk_e": ["2.5", "2.5"],
+  "machine_max_jerk_x": ["9", "9"],
+  "machine_max_jerk_y": ["9", "9"],
+  "machine_max_jerk_z": ["0.2", "0.4"],
+  "machine_min_extruding_rate": ["0", "0"],
+  "machine_min_travel_rate": ["0", "0"],
+  "max_layer_height": ["0.32"],
+  "min_layer_height": ["0.08"],
+  "printable_height": "250",
+  "extruder_clearance_radius": "65",
+  "extruder_clearance_height_to_rod": "36",
+  "extruder_clearance_height_to_lid": "140",
+  "printer_settings_id": "",
+  "printer_technology": "FFF",
+  "printer_variant": "0.4",
+  "retraction_minimum_travel": ["1"],
+  "retract_before_wipe": ["70%"],
+  "retract_when_changing_layer": ["1"],
+  "retraction_length": ["0.8"],
+  "retract_length_toolchange": ["2"],
+  "z_hop": ["0.4"],
+  "retract_restart_extra": ["0"],
+  "retract_restart_extra_toolchange": ["0"],
+  "retraction_speed": ["30"],
+  "deretraction_speed": ["30"],
+  "z_hop_types": "Normal Lift",
+  "silent_mode": "0",
+  "single_extruder_multi_material": "1",
+  "change_filament_gcode": "",
+  "wipe": ["1"],
+  "default_filament_profile": ["Generic PLA @System"],
+  "default_print_profile": "0.20mm Standard @MyKlipper",
+  "bed_exclude_area": ["0x0"],
+  "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
+  "machine_end_gcode": "PRINT_END",
+  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+  "machine_pause_gcode": "PAUSE",
+  "scan_first_layer": "0",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}
diff --git a/OrcaSlicer/system/Custom/machine/fdm_machine_common.json b/OrcaSlicer/system/Custom/machine/fdm_machine_common.json
new file mode 100644
index 0000000..27d7157
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/fdm_machine_common.json
@@ -0,0 +1,119 @@
+{
+    "type": "machine",
+    "name": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "printer_technology": "FFF",
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "gcode_flavor": "marlin",
+    "silent_mode": "0",
+    "machine_max_acceleration_e": [
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "10000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000"
+    ],
+    "machine_max_acceleration_x": [
+        "10000"
+    ],
+    "machine_max_acceleration_y": [
+        "10000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "60"
+    ],
+    "machine_max_speed_x": [
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "5"
+    ],
+    "machine_max_jerk_x": [
+        "8"
+    ],
+    "machine_max_jerk_y": [
+        "8"
+    ],
+    "machine_max_jerk_z": [
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "1"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "60"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "wipe": [
+        "1"
+    ],
+    "default_print_profile": "",
+    "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
+    "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_pause_gcode": "M601"
+}
diff --git a/OrcaSlicer/system/Custom/machine/fdm_rrf_common.json b/OrcaSlicer/system/Custom/machine/fdm_rrf_common.json
new file mode 100644
index 0000000..1c33af0
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/fdm_rrf_common.json
@@ -0,0 +1,141 @@
+{
+    "type": "machine",
+    "name": "fdm_rrf_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_machine_common",
+    "gcode_flavor": "reprapfirmware",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_e": [
+        "25",
+        "25"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.2",
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "printer_settings_id": "",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retract_length_toolchange": [
+        "2"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "deretraction_speed": [
+        "30"
+    ],
+    "z_hop_types": "Normal Lift",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "wipe": [
+        "1"
+    ],
+    "default_filament_profile": [
+        "Generic PLA @System"
+    ],
+    "default_print_profile": "0.20mm Standard @MyRRF",
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "scan_first_layer": "0",
+    "nozzle_type": "undefine",
+    "auxiliary_fan": "0",
+    "machine_start_gcode": "; Prime Filament Sensor for Runout\nM581 P1 T2 S-1 R0\nM950 J1 C\"nil\" ; Input 1 e0 Filament Sensor \nM591 D0 P2 C\"e0stop\" S1 ; Filament Runout Sensor\n\nM83  ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S140 ; Set extruder temp 140C before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\n;G28 W\nG32 ; Levels Z Tilt and probes Z=0\nG29 S0 ; mesh bed leveling\nG1 X0 Y0 Z2 F2000\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG1 X10 Y-7 Z0.3 F1000.0 ; go outside print area\nG92 E0.0\nG1 Z0.2 E8 ; Purge Bubble\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0",
+    "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_pause_gcode": "M601"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/machine/fdm_toolchanger_common.json b/OrcaSlicer/system/Custom/machine/fdm_toolchanger_common.json
new file mode 100644
index 0000000..0f6ca7d
--- /dev/null
+++ b/OrcaSlicer/system/Custom/machine/fdm_toolchanger_common.json
@@ -0,0 +1,189 @@
+{
+    "type": "machine",
+    "name": "fdm_toolchanger_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_klipper_common",
+    "gcode_flavor": "klipper",
+    "single_extruder_multi_material": "0",
+    "default_filament_profile": [
+        "Generic PLA @MyToolChanger"
+    ],
+    "default_print_profile": "0.20mm Standard @MyToolChanger",
+    "max_layer_height": [
+        "0.32",
+        "0.32",
+        "0.32",
+        "0.32",
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08",
+        "0.08",
+        "0.08",
+        "0.08",
+        "0.08"
+    ],
+    "deretraction_speed": [
+        "30",
+        "30",
+        "30",
+        "30",
+        "30"
+    ],
+    "extruder_colour": [
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0",
+        "0x0",
+        "0x0",
+        "0x0",
+        "0x0"
+    ],
+    "long_retractions_when_cut": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_diameter": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "retract_before_wipe": [
+        "70%",
+        "70%",
+        "70%",
+        "70%",
+        "70%"
+    ],
+    "retract_length_toolchange": [
+        "2",
+        "2",
+        "2",
+        "2",
+        "2"
+    ],
+    "retract_lift_above": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_lift_below": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "retraction_distances_when_cut": [
+        "18",
+        "18",
+        "18",
+        "18",
+        "18"
+    ],
+    "retraction_length": [
+        "0.8",
+        "0.8",
+        "0.8",
+        "0.8",
+        "0.8"
+    ],
+    "retraction_minimum_travel": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "retraction_speed": [
+        "30",
+        "30",
+        "30",
+        "30",
+        "30"
+    ],
+    "travel_slope": [
+        "3",
+        "3",
+        "3",
+        "3",
+        "3"
+    ],
+    "version": "2.1.1.1",
+    "wipe": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "wipe_distance": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "z_hop": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Normal Lift",
+        "Normal Lift",
+        "Normal Lift",
+        "Normal Lift",
+        "Normal Lift"
+    ],
+    "purge_in_prime_tower": "0",
+    "machine_pause_gcode": "M601",
+    "change_filament_gcode": "",    "machine_start_gcode": "PRINT_START  TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif}  BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n",
+
+    "scan_first_layer": "0",
+    "nozzle_type": "undefine",
+    "auxiliary_fan": "0"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyKlipper.json
new file mode 100644
index 0000000..b9f1557
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyKlipper.json	
@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm Extra Fine @MyKlipper",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_klipper_common",
+    "layer_height": "0.08",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9",
+    "support_top_z_distance": "0.08",
+    "support_bottom_z_distance": "0.08",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.4 nozzle",
+        "MyKlipper 0.2 nozzle",
+        "MyKlipper 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyMarlin.json b/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyMarlin.json
new file mode 100644
index 0000000..d8d4ad7
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyMarlin.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm Extra Fine @MyMarlin",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_marlin_common",
+    "layer_height": "0.08",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyRRF.json b/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyRRF.json
new file mode 100644
index 0000000..8bc0105
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyRRF.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm Extra Fine @MyRRF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_rrf_common",
+    "layer_height": "0.08",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyToolChanger.json
new file mode 100644
index 0000000..4ce1736
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyToolChanger.json	
@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.08mm Extra Fine @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_mytoolchanger_common",
+    "layer_height": "0.08",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9",
+    "support_top_z_distance": "0.08",
+    "support_bottom_z_distance": "0.08",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.12mm Fine @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.12mm Fine @MyKlipper.json
new file mode 100644
index 0000000..575bd40
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.12mm Fine @MyKlipper.json	
@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @MyKlipper",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_klipper_common",
+    "layer_height": "0.12",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "6",
+    "support_top_z_distance": "0.08",
+    "support_bottom_z_distance": "0.08",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.4 nozzle",
+        "MyKlipper 0.2 nozzle",
+        "MyKlipper 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.12mm Fine @MyMarlin.json b/OrcaSlicer/system/Custom/process/0.12mm Fine @MyMarlin.json
new file mode 100644
index 0000000..3c9beff
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.12mm Fine @MyMarlin.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @MyMarlin",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_marlin_common",
+    "layer_height": "0.12",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "6"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.12mm Fine @MyRRF.json b/OrcaSlicer/system/Custom/process/0.12mm Fine @MyRRF.json
new file mode 100644
index 0000000..cf0da14
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.12mm Fine @MyRRF.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @MyRRF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_rrf_common",
+    "layer_height": "0.12",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "6"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.12mm Fine @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.12mm Fine @MyToolChanger.json
new file mode 100644
index 0000000..1117ba5
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.12mm Fine @MyToolChanger.json	
@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_mytoolchanger_common",
+    "layer_height": "0.12",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "6",
+    "support_top_z_distance": "0.08",
+    "support_bottom_z_distance": "0.08",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyKlipper.json
new file mode 100644
index 0000000..518ed7c
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyKlipper.json	
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.15mm Optimal @MyKlipper",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_klipper_common",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "layer_height": "0.15",
+    "support_top_z_distance": "0.15",
+    "support_bottom_z_distance": "0.15",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.4 nozzle",
+        "MyKlipper 0.2 nozzle",
+        "MyKlipper 0.6 nozzle",
+        "MyKlipper 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyMarlin.json b/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyMarlin.json
new file mode 100644
index 0000000..28a0067
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyMarlin.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.15mm Optimal @MyMarlin",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_marlin_common",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "layer_height": "0.15"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyRRF.json b/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyRRF.json
new file mode 100644
index 0000000..dbc5c6e
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyRRF.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.15mm Optimal @MyRRF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_rrf_common",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "layer_height": "0.15"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyToolChanger.json
new file mode 100644
index 0000000..1325416
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyToolChanger.json	
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.15mm Optimal @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_mytoolchanger_common",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "layer_height": "0.15",
+    "support_top_z_distance": "0.15",
+    "support_bottom_z_distance": "0.15",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyKlipper.json
new file mode 100644
index 0000000..45df9da
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyKlipper.json	
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @MyKlipper",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_klipper_common",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "support_top_z_distance": "0.16",
+    "support_bottom_z_distance": "0.16",
+    "layer_height": "0.16",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.4 nozzle",
+        "MyKlipper 0.2 nozzle",
+        "MyKlipper 0.6 nozzle",
+        "MyKlipper 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyToolChanger.json
new file mode 100644
index 0000000..f3fa805
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyToolChanger.json	
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_mytoolchanger_common",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "support_top_z_distance": "0.16",
+    "support_bottom_z_distance": "0.16",
+    "layer_height": "0.16",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.2 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.20mm Standard @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.20mm Standard @MyKlipper.json
new file mode 100644
index 0000000..d38acd8
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.20mm Standard @MyKlipper.json	
@@ -0,0 +1,14 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @MyKlipper",
+    "from": "system",
+    "inherits": "fdm_process_klipper_common",
+    "instantiation": "true",
+    "layer_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.4 nozzle",
+        "MyKlipper 0.6 nozzle",
+        "MyKlipper 0.8 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Custom/process/0.20mm Standard @MyMarlin.json b/OrcaSlicer/system/Custom/process/0.20mm Standard @MyMarlin.json
new file mode 100644
index 0000000..8ce4919
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.20mm Standard @MyMarlin.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @MyMarlin",
+    "from": "system",
+    "inherits": "fdm_process_marlin_common",
+    "instantiation": "true",
+    "layer_height": "0.2",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.20mm Standard @MyRRF.json b/OrcaSlicer/system/Custom/process/0.20mm Standard @MyRRF.json
new file mode 100644
index 0000000..84d732c
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.20mm Standard @MyRRF.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @MyRRF",
+    "from": "system",
+    "inherits": "fdm_process_rrf_common",
+    "instantiation": "true",
+    "layer_height": "0.2",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.20mm Standard @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.20mm Standard @MyToolChanger.json
new file mode 100644
index 0000000..812886e
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.20mm Standard @MyToolChanger.json	
@@ -0,0 +1,14 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @MyToolChanger",
+    "from": "system",
+    "inherits": "fdm_process_mytoolchanger_common",
+    "instantiation": "true",
+    "layer_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Custom/process/0.24mm Draft @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.24mm Draft @MyKlipper.json
new file mode 100644
index 0000000..30a520b
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.24mm Draft @MyKlipper.json	
@@ -0,0 +1,17 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @MyKlipper",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_klipper_common",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "layer_height": "0.24",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.4 nozzle",
+        "MyKlipper 0.6 nozzle",
+        "MyKlipper 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.24mm Draft @MyMarlin.json b/OrcaSlicer/system/Custom/process/0.24mm Draft @MyMarlin.json
new file mode 100644
index 0000000..6ca175d
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.24mm Draft @MyMarlin.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @MyMarlin",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_marlin_common",
+    "layer_height": "0.24",
+    "top_surface_line_width": "0.45",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.24mm Draft @MyRRF.json b/OrcaSlicer/system/Custom/process/0.24mm Draft @MyRRF.json
new file mode 100644
index 0000000..85ca2a9
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.24mm Draft @MyRRF.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @MyRRF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_rrf_common",
+    "layer_height": "0.24",
+    "top_surface_line_width": "0.45",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.24mm Draft @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.24mm Draft @MyToolChanger.json
new file mode 100644
index 0000000..af372cc
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.24mm Draft @MyToolChanger.json	
@@ -0,0 +1,17 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_mytoolchanger_common",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "layer_height": "0.24",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyKlipper.json
new file mode 100644
index 0000000..a2ff46c
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyKlipper.json	
@@ -0,0 +1,15 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm Extra Draft @MyKlipper",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_klipper_common",
+    "layer_height": "0.28",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.4 nozzle",
+        "MyKlipper 0.6 nozzle",
+        "MyKlipper 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyMarlin.json b/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyMarlin.json
new file mode 100644
index 0000000..558b1c5
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyMarlin.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm Extra Draft @MyMarlin",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_marlin_common",
+    "layer_height": "0.28",
+    "top_surface_line_width": "0.45",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyRRF.json b/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyRRF.json
new file mode 100644
index 0000000..a0dcd98
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyRRF.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm Extra Draft @MyRRF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_rrf_common",
+    "layer_height": "0.28",
+    "top_surface_line_width": "0.45",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4"
+}
diff --git a/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyToolChanger.json
new file mode 100644
index 0000000..71f4354
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyToolChanger.json	
@@ -0,0 +1,15 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.28mm Extra Draft @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_mytoolchanger_common",
+    "layer_height": "0.28",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyKlipper.json
new file mode 100644
index 0000000..a3da4a7
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyKlipper.json	
@@ -0,0 +1,17 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.32mm Standard @MyKlipper",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_klipper_common",
+  "support_top_z_distance": "0.24",
+  "support_bottom_z_distance": "0.24",
+  "layer_height": "0.32",
+  "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.4 nozzle",
+        "MyKlipper 0.6 nozzle",
+        "MyKlipper 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyToolChanger.json
new file mode 100644
index 0000000..d5282ee
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyToolChanger.json	
@@ -0,0 +1,17 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.32mm Standard @MyToolChanger",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_mytoolchanger_common",
+  "support_top_z_distance": "0.24",
+  "support_bottom_z_distance": "0.24",
+  "layer_height": "0.32",
+  "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.4 nozzle",
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyKlipper.json
new file mode 100644
index 0000000..e5f2093
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyKlipper.json	
@@ -0,0 +1,16 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.40mm Standard @MyKlipper",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_klipper_common",
+  "support_top_z_distance": "0.24",
+  "support_bottom_z_distance": "0.24",
+  "layer_height": "0.40",
+  "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.6 nozzle",
+        "MyKlipper 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyToolChanger.json
new file mode 100644
index 0000000..940d51d
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyToolChanger.json	
@@ -0,0 +1,16 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.40mm Standard @MyToolChanger",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_mytoolchanger_common",
+  "support_top_z_distance": "0.24",
+  "support_bottom_z_distance": "0.24",
+  "layer_height": "0.40",
+  "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.6 nozzle",
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyKlipper.json b/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyKlipper.json
new file mode 100644
index 0000000..d8e6e21
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyKlipper.json	
@@ -0,0 +1,15 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.56mm Standard @MyKlipper",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_klipper_common",
+    "support_top_z_distance": "0.24",
+    "support_bottom_z_distance": "0.24",
+    "layer_height": "0.56",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyKlipper 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyToolChanger.json b/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyToolChanger.json
new file mode 100644
index 0000000..ea4ba5c
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyToolChanger.json	
@@ -0,0 +1,15 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.56mm Standard @MyToolChanger",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_mytoolchanger_common",
+    "support_top_z_distance": "0.24",
+    "support_bottom_z_distance": "0.24",
+    "layer_height": "0.56",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "MyToolChanger 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/fdm_process_common.json b/OrcaSlicer/system/Custom/process/fdm_process_common.json
new file mode 100644
index 0000000..cfb78ab
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/fdm_process_common.json
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "name": "fdm_process_common",
+    "from": "system",
+    "instantiation": "false",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_thickness": "0",
+    "bridge_speed": "50",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "1000",
+    "initial_layer_acceleration": "500",
+    "top_surface_acceleration": "1000",
+    "travel_acceleration": "1000",
+    "inner_wall_acceleration": "1000",
+    "outer_wall_acceleration": "700",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "infill_wall_overlap": "25%",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "slowdown_for_curled_perimeters": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "line_width": "110%",
+    "inner_wall_line_width": "110%",
+    "outer_wall_line_width": "100%",
+    "top_surface_line_width": "93.75%",
+    "sparse_infill_line_width": "110%",
+    "initial_layer_line_width": "120%",
+    "internal_solid_infill_line_width": "120%",
+    "support_line_width": "96%",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "3",
+    "min_skirt_length": "4",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "30",
+    "tree_support_wall_count": "0",
+    "tree_support_with_infill": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_shell_thickness": "0.8",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "layer_height": "0.2",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "bridge_flow": "1",
+    "initial_layer_speed": "45",
+    "initial_layer_infill_speed": "45",
+    "outer_wall_speed": "45",
+    "inner_wall_speed": "80",
+    "sparse_infill_speed": "150",
+    "internal_solid_infill_speed": "150",
+    "top_surface_speed": "50",
+    "gap_infill_speed": "30",
+    "travel_speed": "200"
+}
diff --git a/OrcaSlicer/system/Custom/process/fdm_process_klipper_common.json b/OrcaSlicer/system/Custom/process/fdm_process_klipper_common.json
new file mode 100644
index 0000000..cf4a288
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/fdm_process_klipper_common.json
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "name": "fdm_process_klipper_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_common",
+    "default_acceleration": "5000",
+    "top_surface_acceleration": "3000",
+    "travel_acceleration": "7000",
+    "inner_wall_acceleration": "5000",
+    "outer_wall_acceleration": "3000",
+    "initial_layer_acceleration": "500",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "120",
+    "inner_wall_speed": "200",
+    "internal_solid_infill_speed": "200",
+    "top_surface_speed": "100",
+    "gap_infill_speed": "100",
+    "sparse_infill_speed": "200",
+    "travel_speed": "350",
+    "exclude_object": "1"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/fdm_process_marlin_common.json b/OrcaSlicer/system/Custom/process/fdm_process_marlin_common.json
new file mode 100644
index 0000000..7b5bca9
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/fdm_process_marlin_common.json
@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "name": "fdm_process_marlin_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_common",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "50",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "1000",
+    "top_surface_acceleration": "1000",
+    "travel_acceleration": "1000",
+    "inner_wall_acceleration": "1000",
+    "outer_wall_acceleration": "1000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "25%",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "40",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "60",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "45",
+    "initial_layer_infill_speed": "60",
+    "outer_wall_speed": "60",
+    "inner_wall_speed": "80",
+    "internal_solid_infill_speed": "80",
+    "top_surface_speed": "50",
+    "gap_infill_speed": "80",
+    "sparse_infill_speed": "80",
+    "travel_speed": "150",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "enable_arc_fitting": "0",
+    "compatible_printers": [
+      "MyMarlin 0.4 nozzle"
+    ]
+}
diff --git a/OrcaSlicer/system/Custom/process/fdm_process_mytoolchanger_common.json b/OrcaSlicer/system/Custom/process/fdm_process_mytoolchanger_common.json
new file mode 100644
index 0000000..88a499c
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/fdm_process_mytoolchanger_common.json
@@ -0,0 +1,31 @@
+{
+    "type": "process",
+    "name": "fdm_process_mytoolchanger_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_klipper_common",
+    "default_acceleration": "5000",
+    "top_surface_acceleration": "3000",
+    "travel_acceleration": "7000",
+    "inner_wall_acceleration": "5000",
+    "outer_wall_acceleration": "3000",
+    "initial_layer_acceleration": "500",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "120",
+    "inner_wall_speed": "200",
+    "internal_solid_infill_speed": "200",
+    "top_surface_speed": "100",
+    "gap_infill_speed": "100",
+    "sparse_infill_speed": "200",
+    "travel_speed": "350",
+    "exclude_object": "1",
+    "enable_prime_tower": "1",
+    "wipe_tower_cone_angle": "25",
+    "wipe_tower_extra_spacing": "150%",
+    "wipe_tower_rotation_angle": "90",
+    "ooze_prevention": "1",
+	"standby_temperature_delta": "-40",
+    "preheat_time": "30",
+    "preheat_steps": "1"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/Custom/process/fdm_process_rrf_common.json b/OrcaSlicer/system/Custom/process/fdm_process_rrf_common.json
new file mode 100644
index 0000000..88cb3d4
--- /dev/null
+++ b/OrcaSlicer/system/Custom/process/fdm_process_rrf_common.json
@@ -0,0 +1,109 @@
+{
+    "type": "process",
+    "name": "fdm_process_rrf_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_common",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "50",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "5000",
+    "top_surface_acceleration": "3000",
+    "travel_acceleration": "7000",
+    "inner_wall_acceleration": "5000",
+    "outer_wall_acceleration": "3000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "25%",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.4",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "120",
+    "inner_wall_speed": "200",
+    "internal_solid_infill_speed": "200",
+    "top_surface_speed": "100",
+    "gap_infill_speed": "100",
+    "sparse_infill_speed": "200",
+    "travel_speed": "350",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "enable_arc_fitting": "0",
+    "compatible_printers": [
+      "MyRRF 0.4 nozzle"
+    ],
+    "exclude_object": "1"
+}
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary.json b/OrcaSlicer/system/OrcaFilamentLibrary.json
new file mode 100644
index 0000000..e718a2a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary.json
@@ -0,0 +1,768 @@
+{
+    "name": "OrcaFilamentLibrary",
+    "version":  "02.03.00.03",
+    "force_update": "0",
+    "description": "Orca Filament Library",
+    "filament_list": [
+        {
+            "name": "fdm_filament_common",
+            "sub_path": "filament/base/fdm_filament_common.json"
+        },
+        {
+            "name": "fdm_filament_abs",
+            "sub_path": "filament/base/fdm_filament_abs.json"
+        },
+        {
+            "name": "fdm_filament_asa",
+            "sub_path": "filament/base/fdm_filament_asa.json"
+        },
+        {
+            "name": "fdm_filament_bvoh",
+            "sub_path": "filament/base/fdm_filament_bvoh.json"
+        },
+        {
+            "name": "fdm_filament_eva",
+            "sub_path": "filament/base/fdm_filament_eva.json"
+        },
+        {
+            "name": "fdm_filament_hips",
+            "sub_path": "filament/base/fdm_filament_hips.json"
+        },
+        {
+            "name": "fdm_filament_pa",
+            "sub_path": "filament/base/fdm_filament_pa.json"
+        },
+        {
+            "name": "fdm_filament_pc",
+            "sub_path": "filament/base/fdm_filament_pc.json"
+        },
+        {
+            "name": "fdm_filament_pctg",
+            "sub_path": "filament/base/fdm_filament_pctg.json"
+        },
+        {
+            "name": "fdm_filament_pe",
+            "sub_path": "filament/base/fdm_filament_pe.json"
+        },
+        {
+            "name": "fdm_filament_pet",
+            "sub_path": "filament/base/fdm_filament_pet.json"
+        },
+        {
+            "name": "fdm_filament_pha",
+            "sub_path": "filament/base/fdm_filament_pha.json"
+        },
+        {
+            "name": "fdm_filament_pla",
+            "sub_path": "filament/base/fdm_filament_pla.json"
+        },
+        {
+            "name": "fdm_filament_pp",
+            "sub_path": "filament/base/fdm_filament_pp.json"
+        },
+        {
+            "name": "fdm_filament_ppa",
+            "sub_path": "filament/base/fdm_filament_ppa.json"
+        },
+        {
+            "name": "fdm_filament_pps",
+            "sub_path": "filament/base/fdm_filament_pps.json"
+        },
+        {
+            "name": "fdm_filament_pva",
+            "sub_path": "filament/base/fdm_filament_pva.json"
+        },
+        {
+            "name": "fdm_filament_sbs",
+            "sub_path": "filament/base/fdm_filament_sbs.json"
+        },
+        {
+            "name": "fdm_filament_tpu",
+            "sub_path": "filament/base/fdm_filament_tpu.json"
+        },
+        {
+            "name": "Bambu ABS @base",
+            "sub_path": "filament/Bambu/Bambu ABS @base.json"
+        },
+        {
+            "name": "Bambu ABS-GF @base",
+            "sub_path": "filament/Bambu/Bambu ABS-GF @base.json"
+        },
+        {
+            "name": "Bambu Support for ABS @base",
+            "sub_path": "filament/Bambu/Bambu Support for ABS @base.json"
+        },
+        {
+            "name": "Generic ABS @System",
+            "sub_path": "filament/Generic ABS @System.json"
+        },
+        {
+            "name": "PolyLite ABS @base",
+            "sub_path": "filament/Polymaker/PolyLite ABS @base.json"
+        },
+        {
+            "name": "Bambu ASA @base",
+            "sub_path": "filament/Bambu/Bambu ASA @base.json"
+        },
+        {
+            "name": "Bambu ASA-Aero @base",
+            "sub_path": "filament/Bambu/Bambu ASA-Aero @base.json"
+        },
+        {
+            "name": "Bambu ASA-CF @base",
+            "sub_path": "filament/Bambu/Bambu ASA-CF @base.json"
+        },
+        {
+            "name": "Generic ASA @System",
+            "sub_path": "filament/Generic ASA @System.json"
+        },
+        {
+            "name": "PolyLite ASA @base",
+            "sub_path": "filament/Polymaker/PolyLite ASA @base.json"
+        },
+        {
+            "name": "Generic BVOH @System",
+            "sub_path": "filament/Generic BVOH @System.json"
+        },
+        {
+            "name": "Generic EVA @System",
+            "sub_path": "filament/Generic EVA @System.json"
+        },
+        {
+            "name": "Generic HIPS @System",
+            "sub_path": "filament/Generic HIPS @System.json"
+        },
+        {
+            "name": "AliZ PA-CF @base",
+            "sub_path": "filament/AliZ/AliZ PA-CF @base.json"
+        },
+        {
+            "name": "Bambu PA-CF @base",
+            "sub_path": "filament/Bambu/Bambu PA-CF @base.json"
+        },
+        {
+            "name": "Bambu PA6-CF @base",
+            "sub_path": "filament/Bambu/Bambu PA6-CF @base.json"
+        },
+        {
+            "name": "Bambu PA6-GF @base",
+            "sub_path": "filament/Bambu/Bambu PA6-GF @base.json"
+        },
+        {
+            "name": "Bambu PAHT-CF @base",
+            "sub_path": "filament/Bambu/Bambu PAHT-CF @base.json"
+        },
+        {
+            "name": "Bambu Support For PA/PET @base",
+            "sub_path": "filament/Bambu/Bambu Support For PA PET @base.json"
+        },
+        {
+            "name": "Bambu Support G @base",
+            "sub_path": "filament/Bambu/Bambu Support G @base.json"
+        },
+        {
+            "name": "Fiberon PA12-CF @base",
+            "sub_path": "filament/Polymaker/Fiberon PA12-CF @base.json"
+        },
+        {
+            "name": "Fiberon PA6-CF @base",
+            "sub_path": "filament/Polymaker/Fiberon PA6-CF @base.json"
+        },
+        {
+            "name": "Fiberon PA6-GF @base",
+            "sub_path": "filament/Polymaker/Fiberon PA6-GF @base.json"
+        },
+        {
+            "name": "Fiberon PA612-CF @base",
+            "sub_path": "filament/Polymaker/Fiberon PA612-CF @base.json"
+        },
+        {
+            "name": "Generic PA @System",
+            "sub_path": "filament/Generic PA @System.json"
+        },
+        {
+            "name": "Generic PA-CF @System",
+            "sub_path": "filament/Generic PA-CF @System.json"
+        },
+        {
+            "name": "Bambu PC @base",
+            "sub_path": "filament/Bambu/Bambu PC @base.json"
+        },
+        {
+            "name": "Bambu PC FR @base",
+            "sub_path": "filament/Bambu/Bambu PC FR @base.json"
+        },
+        {
+            "name": "Generic PC @System",
+            "sub_path": "filament/Generic PC @System.json"
+        },
+        {
+            "name": "Generic PCTG @System",
+            "sub_path": "filament/Generic PCTG @System.json"
+        },
+        {
+            "name": "Generic PE @System",
+            "sub_path": "filament/Generic PE @System.json"
+        },
+        {
+            "name": "Generic PE-CF @System",
+            "sub_path": "filament/Generic PE-CF @System.json"
+        },
+        {
+            "name": "AliZ PETG @base",
+            "sub_path": "filament/AliZ/AliZ PETG @base.json"
+        },
+        {
+            "name": "Bambu PET-CF @base",
+            "sub_path": "filament/Bambu/Bambu PET-CF @base.json"
+        },
+        {
+            "name": "Bambu PETG Basic @base",
+            "sub_path": "filament/Bambu/Bambu PETG Basic @base.json"
+        },
+        {
+            "name": "Bambu PETG HF @base",
+            "sub_path": "filament/Bambu/Bambu PETG HF @base.json"
+        },
+        {
+            "name": "Bambu PETG Translucent @base",
+            "sub_path": "filament/Bambu/Bambu PETG Translucent @base.json"
+        },
+        {
+            "name": "Bambu PETG-CF @base",
+            "sub_path": "filament/Bambu/Bambu PETG-CF @base.json"
+        },
+        {
+            "name": "Fiberon PET-CF @base",
+            "sub_path": "filament/Polymaker/Fiberon PET-CF @base.json"
+        },
+        {
+            "name": "Fiberon PETG-ESD @base",
+            "sub_path": "filament/Polymaker/Fiberon PETG-ESD @base.json"
+        },
+        {
+            "name": "Fiberon PETG-rCF @base",
+            "sub_path": "filament/Polymaker/Fiberon PETG-rCF @base.json"
+        },
+        {
+            "name": "Generic PETG @System",
+            "sub_path": "filament/Generic PETG @System.json"
+        },
+        {
+            "name": "Generic PETG HF @System",
+            "sub_path": "filament/Generic PETG HF @System.json"
+        },
+        {
+            "name": "Generic PETG-CF @System",
+            "sub_path": "filament/Generic PETG-CF @System.json"
+        },
+        {
+            "name": "PolyLite PETG @base",
+            "sub_path": "filament/Polymaker/PolyLite PETG @base.json"
+        },
+        {
+            "name": "SUNLU PETG @base",
+            "sub_path": "filament/SUNLU/SUNLU PETG @base.json"
+        },
+        {
+            "name": "Generic PHA @System",
+            "sub_path": "filament/Generic PHA @System.json"
+        },
+        {
+            "name": "AliZ PLA @base",
+            "sub_path": "filament/AliZ/AliZ PLA @base.json"
+        },
+        {
+            "name": "Bambu PLA Aero @base",
+            "sub_path": "filament/Bambu/Bambu PLA Aero @base.json"
+        },
+        {
+            "name": "Bambu PLA Basic @base",
+            "sub_path": "filament/Bambu/Bambu PLA Basic @base.json"
+        },
+        {
+            "name": "Bambu PLA Dynamic @base",
+            "sub_path": "filament/Bambu/Bambu PLA Dynamic @base.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @base",
+            "sub_path": "filament/Bambu/Bambu PLA Galaxy @base.json"
+        },
+        {
+            "name": "Bambu PLA Glow @base",
+            "sub_path": "filament/Bambu/Bambu PLA Glow @base.json"
+        },
+        {
+            "name": "Bambu PLA Impact @base",
+            "sub_path": "filament/Bambu/Bambu PLA Impact @base.json"
+        },
+        {
+            "name": "Bambu PLA Marble @base",
+            "sub_path": "filament/Bambu/Bambu PLA Marble @base.json"
+        },
+        {
+            "name": "Bambu PLA Matte @base",
+            "sub_path": "filament/Bambu/Bambu PLA Matte @base.json"
+        },
+        {
+            "name": "Bambu PLA Metal @base",
+            "sub_path": "filament/Bambu/Bambu PLA Metal @base.json"
+        },
+        {
+            "name": "Bambu PLA Silk @base",
+            "sub_path": "filament/Bambu/Bambu PLA Silk @base.json"
+        },
+        {
+            "name": "Bambu PLA Silk+ @base",
+            "sub_path": "filament/Bambu/Bambu PLA Silk+ @base.json"
+        },
+        {
+            "name": "Bambu PLA Sparkle @base",
+            "sub_path": "filament/Bambu/Bambu PLA Sparkle @base.json"
+        },
+        {
+            "name": "Bambu PLA Tough @base",
+            "sub_path": "filament/Bambu/Bambu PLA Tough @base.json"
+        },
+        {
+            "name": "Bambu PLA Wood @base",
+            "sub_path": "filament/Bambu/Bambu PLA Wood @base.json"
+        },
+        {
+            "name": "Bambu PLA-CF @base",
+            "sub_path": "filament/Bambu/Bambu PLA-CF @base.json"
+        },
+        {
+            "name": "Bambu Support For PLA @base",
+            "sub_path": "filament/Bambu/Bambu Support For PLA @base.json"
+        },
+        {
+            "name": "Bambu Support For PLA/PETG @base",
+            "sub_path": "filament/Bambu/Bambu Support For PLA-PETG @base.json"
+        },
+        {
+            "name": "Bambu Support W @base",
+            "sub_path": "filament/Bambu/Bambu Support W @base.json"
+        },
+        {
+            "name": "Generic PLA @System",
+            "sub_path": "filament/Generic PLA @System.json"
+        },
+        {
+            "name": "Generic PLA High Speed @System",
+            "sub_path": "filament/Generic PLA High Speed @System.json"
+        },
+        {
+            "name": "Generic PLA Matte @System",
+            "sub_path": "filament/Generic PLA Matte @System.json"
+        },
+        {
+            "name": "Generic PLA-CF @System",
+            "sub_path": "filament/Generic PLA-CF @System.json"
+        },
+        {
+            "name": "Overture Matte PLA @base",
+            "sub_path": "filament/Overture/Overture Matte PLA @base.json"
+        },
+        {
+            "name": "Overture PLA @base",
+            "sub_path": "filament/Overture/Overture PLA @base.json"
+        },
+        {
+            "name": "PolyLite PLA @base",
+            "sub_path": "filament/Polymaker/PolyLite PLA @base.json"
+        },
+        {
+            "name": "PolyTerra PLA @base",
+            "sub_path": "filament/Polymaker/PolyTerra PLA @base.json"
+        },
+        {
+            "name": "SUNLU PLA Marble @base",
+            "sub_path": "filament/SUNLU/SUNLU Marble PLA @base.json"
+        },
+        {
+            "name": "SUNLU PLA Matte @base",
+            "sub_path": "filament/SUNLU/SUNLU PLA Matte @base.json"
+        },
+        {
+            "name": "SUNLU PLA+ 2.0 @base",
+            "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @base.json"
+        },
+        {
+            "name": "SUNLU PLA+ @base",
+            "sub_path": "filament/SUNLU/SUNLU PLA+ @base.json"
+        },
+        {
+            "name": "SUNLU Silk PLA+ @base",
+            "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @base.json"
+        },
+        {
+            "name": "SUNLU Wood PLA @base",
+            "sub_path": "filament/SUNLU/SUNLU Wood PLA @base.json"
+        },
+        {
+            "name": "eSUN PLA+ @base",
+            "sub_path": "filament/eSUN/eSUN PLA+ @base.json"
+        },
+        {
+            "name": "eSUN PETG @base",
+            "sub_path": "filament/eSUN/eSUN PETG @base.json"
+        },
+        {
+            "name": "fdm_filament_pla_silk",
+            "sub_path": "filament/base/fdm_filament_pla_silk.json"
+        },
+        {
+            "name": "Generic PP @System",
+            "sub_path": "filament/Generic PP @System.json"
+        },
+        {
+            "name": "Generic PP-CF @System",
+            "sub_path": "filament/Generic PP-CF @System.json"
+        },
+        {
+            "name": "Generic PP-GF @System",
+            "sub_path": "filament/Generic PP-GF @System.json"
+        },
+        {
+            "name": "Bambu PPA-CF @base",
+            "sub_path": "filament/Bambu/Bambu PPA-CF @base.json"
+        },
+        {
+            "name": "Generic PPA-CF @System",
+            "sub_path": "filament/Generic PPA-CF @System.json"
+        },
+        {
+            "name": "Generic PPA-GF @System",
+            "sub_path": "filament/Generic PPA-GF @System.json"
+        },
+        {
+            "name": "Bambu PPS-CF @base",
+            "sub_path": "filament/Bambu/Bambu PPS-CF @base.json"
+        },
+        {
+            "name": "Bambu PVA @base",
+            "sub_path": "filament/Bambu/Bambu PVA @base.json"
+        },
+        {
+            "name": "Generic PVA @System",
+            "sub_path": "filament/Generic PVA @System.json"
+        },
+        {
+            "name": "Generic SBS @System",
+            "sub_path": "filament/Generic SBS @System.json"
+        },
+        {
+            "name": "Bambu TPU 95A @base",
+            "sub_path": "filament/Bambu/Bambu TPU 95A @base.json"
+        },
+        {
+            "name": "Bambu TPU 95A HF @base",
+            "sub_path": "filament/Bambu/Bambu TPU 95A HF @base.json"
+        },
+        {
+            "name": "Generic TPU @System",
+            "sub_path": "filament/Generic TPU @System.json"
+        },
+        {
+            "name": "Bambu ABS @System",
+            "sub_path": "filament/Bambu/Bambu ABS @System.json"
+        },
+        {
+            "name": "Bambu ABS-GF @System",
+            "sub_path": "filament/Bambu/Bambu ABS-GF @System.json"
+        },
+        {
+            "name": "Bambu Support for ABS @System",
+            "sub_path": "filament/Bambu/Bambu Support for ABS @System.json"
+        },
+        {
+            "name": "PolyLite ABS @System",
+            "sub_path": "filament/Polymaker/PolyLite ABS @System.json"
+        },
+        {
+            "name": "Bambu ASA @System",
+            "sub_path": "filament/Bambu/Bambu ASA @System.json"
+        },
+        {
+            "name": "Bambu ASA-Aero @System",
+            "sub_path": "filament/Bambu/Bambu ASA-Aero @System.json"
+        },
+        {
+            "name": "Bambu ASA-CF @System",
+            "sub_path": "filament/Bambu/Bambu ASA-CF @System.json"
+        },
+        {
+            "name": "PolyLite ASA @System",
+            "sub_path": "filament/Polymaker/PolyLite ASA @System.json"
+        },
+        {
+            "name": "AliZ PA-CF @System",
+            "sub_path": "filament/AliZ/AliZ PA-CF @System.json"
+        },
+        {
+            "name": "Bambu PA-CF @System",
+            "sub_path": "filament/Bambu/Bambu PA-CF @System.json"
+        },
+        {
+            "name": "Bambu PA6-CF @System",
+            "sub_path": "filament/Bambu/Bambu PA6-CF @System.json"
+        },
+        {
+            "name": "Bambu PA6-GF @System",
+            "sub_path": "filament/Bambu/Bambu PA6-GF @System.json"
+        },
+        {
+            "name": "Bambu PAHT-CF @System",
+            "sub_path": "filament/Bambu/Bambu PAHT-CF @System.json"
+        },
+        {
+            "name": "Bambu Support For PA/PET @System",
+            "sub_path": "filament/Bambu/Bambu Support For PA PET @System.json"
+        },
+        {
+            "name": "Bambu Support G @System",
+            "sub_path": "filament/Bambu/Bambu Support G @System.json"
+        },
+        {
+            "name": "Fiberon PA12-CF @System",
+            "sub_path": "filament/Polymaker/Fiberon PA12-CF @System.json"
+        },
+        {
+            "name": "Fiberon PA6-CF @System",
+            "sub_path": "filament/Polymaker/Fiberon PA6-CF @System.json"
+        },
+        {
+            "name": "Fiberon PA6-GF @System",
+            "sub_path": "filament/Polymaker/Fiberon PA6-GF @System.json"
+        },
+        {
+            "name": "Fiberon PA612-CF @System",
+            "sub_path": "filament/Polymaker/Fiberon PA612-CF @System.json"
+        },
+        {
+            "name": "Bambu PC @System",
+            "sub_path": "filament/Bambu/Bambu PC @System.json"
+        },
+        {
+            "name": "Bambu PC FR @System",
+            "sub_path": "filament/Bambu/Bambu PC FR @System.json"
+        },
+        {
+            "name": "AliZ PETG @System",
+            "sub_path": "filament/AliZ/AliZ PETG @System.json"
+        },
+        {
+            "name": "AliZ PETG-CF @base",
+            "sub_path": "filament/AliZ/AliZ PETG-CF @base.json"
+        },
+        {
+            "name": "AliZ PETG-Metal @base",
+            "sub_path": "filament/AliZ/AliZ PETG-Metal @base.json"
+        },
+        {
+            "name": "Bambu PET-CF @System",
+            "sub_path": "filament/Bambu/Bambu PET-CF @System.json"
+        },
+        {
+            "name": "Bambu PETG Basic @System",
+            "sub_path": "filament/Bambu/Bambu PETG Basic @System.json"
+        },
+        {
+            "name": "Bambu PETG HF @System",
+            "sub_path": "filament/Bambu/Bambu PETG HF @System.json"
+        },
+        {
+            "name": "Bambu PETG Translucent @System",
+            "sub_path": "filament/Bambu/Bambu PETG Translucent @System.json"
+        },
+        {
+            "name": "Bambu PETG-CF @System",
+            "sub_path": "filament/Bambu/Bambu PETG-CF @System.json"
+        },
+        {
+            "name": "Fiberon PET-CF @System",
+            "sub_path": "filament/Polymaker/Fiberon PET-CF @System.json"
+        },
+        {
+            "name": "Fiberon PETG-ESD @System",
+            "sub_path": "filament/Polymaker/Fiberon PETG-ESD @System.json"
+        },
+        {
+            "name": "Fiberon PETG-rCF @System",
+            "sub_path": "filament/Polymaker/Fiberon PETG-rCF @System.json"
+        },
+        {
+            "name": "PolyLite PETG @System",
+            "sub_path": "filament/Polymaker/PolyLite PETG @System.json"
+        },
+        {
+            "name": "SUNLU PETG @System",
+            "sub_path": "filament/SUNLU/SUNLU PETG @System.json"
+        },
+        {
+            "name": "AliZ PLA @System",
+            "sub_path": "filament/AliZ/AliZ PLA @System.json"
+        },
+        {
+            "name": "Bambu PLA Aero @System",
+            "sub_path": "filament/Bambu/Bambu PLA Aero @System.json"
+        },
+        {
+            "name": "Bambu PLA Basic @System",
+            "sub_path": "filament/Bambu/Bambu PLA Basic @System.json"
+        },
+        {
+            "name": "Bambu PLA Dynamic @System",
+            "sub_path": "filament/Bambu/Bambu PLA Dynamic @System.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @System",
+            "sub_path": "filament/Bambu/Bambu PLA Galaxy @System.json"
+        },
+        {
+            "name": "Bambu PLA Glow @System",
+            "sub_path": "filament/Bambu/Bambu PLA Glow @System.json"
+        },
+        {
+            "name": "Bambu PLA Impact @System",
+            "sub_path": "filament/Bambu/Bambu PLA Impact @System.json"
+        },
+        {
+            "name": "Bambu PLA Marble @System",
+            "sub_path": "filament/Bambu/Bambu PLA Marble @System.json"
+        },
+        {
+            "name": "Bambu PLA Matte @System",
+            "sub_path": "filament/Bambu/Bambu PLA Matte @System.json"
+        },
+        {
+            "name": "Bambu PLA Metal @System",
+            "sub_path": "filament/Bambu/Bambu PLA Metal @System.json"
+        },
+        {
+            "name": "Bambu PLA Silk @System",
+            "sub_path": "filament/Bambu/Bambu PLA Silk @System.json"
+        },
+        {
+            "name": "Bambu PLA Silk+ @System",
+            "sub_path": "filament/Bambu/Bambu PLA Silk+ @System.json"
+        },
+        {
+            "name": "Bambu PLA Sparkle @System",
+            "sub_path": "filament/Bambu/Bambu PLA Sparkle @System.json"
+        },
+        {
+            "name": "Bambu PLA Tough @System",
+            "sub_path": "filament/Bambu/Bambu PLA Tough @System.json"
+        },
+        {
+            "name": "Bambu PLA Wood @System",
+            "sub_path": "filament/Bambu/Bambu PLA Wood @System.json"
+        },
+        {
+            "name": "Bambu PLA-CF @System",
+            "sub_path": "filament/Bambu/Bambu PLA-CF @System.json"
+        },
+        {
+            "name": "Bambu Support For PLA @System",
+            "sub_path": "filament/Bambu/Bambu Support For PLA @System.json"
+        },
+        {
+            "name": "Bambu Support For PLA/PETG @System",
+            "sub_path": "filament/Bambu/Bambu Support For PLA-PETG @System.json"
+        },
+        {
+            "name": "Bambu Support W @System",
+            "sub_path": "filament/Bambu/Bambu Support W @System.json"
+        },
+        {
+            "name": "Overture Matte PLA @System",
+            "sub_path": "filament/Overture/Overture Matte PLA @System.json"
+        },
+        {
+            "name": "Overture PLA @System",
+            "sub_path": "filament/Overture/Overture PLA @System.json"
+        },
+        {
+            "name": "PolyLite Dual PLA @System",
+            "sub_path": "filament/Polymaker/PolyLite Dual PLA @System.json"
+        },
+        {
+            "name": "PolyLite PLA @System",
+            "sub_path": "filament/Polymaker/PolyLite PLA @System.json"
+        },
+        {
+            "name": "PolyTerra Dual PLA @System",
+            "sub_path": "filament/Polymaker/PolyTerra Dual PLA @System.json"
+        },
+        {
+            "name": "PolyTerra PLA @System",
+            "sub_path": "filament/Polymaker/PolyTerra PLA @System.json"
+        },
+        {
+            "name": "SUNLU PLA Marble @System",
+            "sub_path": "filament/SUNLU/SUNLU Marble PLA @System.json"
+        },
+        {
+            "name": "SUNLU PLA Matte @System",
+            "sub_path": "filament/SUNLU/SUNLU PLA Matte @System.json"
+        },
+        {
+            "name": "SUNLU PLA+ 2.0 @System",
+            "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @System.json"
+        },
+        {
+            "name": "SUNLU PLA+ @System",
+            "sub_path": "filament/SUNLU/SUNLU PLA+ @System.json"
+        },
+        {
+            "name": "SUNLU Silk PLA+ @System",
+            "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @System.json"
+        },
+        {
+            "name": "SUNLU Wood PLA @System",
+            "sub_path": "filament/SUNLU/SUNLU Wood PLA @System.json"
+        },
+        {
+            "name": "eSUN PLA+ @System",
+            "sub_path": "filament/eSUN/eSUN PLA+ @System.json"
+        },
+        {
+            "name": "eSUN ePLA-LW @System",
+            "sub_path": "filament/eSUN/eSUN ePLA-LW @System.json"
+        },
+        {
+            "name": "eSUN PETG @System",
+            "sub_path": "filament/eSUN/eSUN PETG @System.json"
+        },
+        {
+            "name": "Generic PLA Silk @System",
+            "sub_path": "filament/Generic PLA Silk @System.json"
+        },
+        {
+            "name": "Bambu PPA-CF @System",
+            "sub_path": "filament/Bambu/Bambu PPA-CF @System.json"
+        },
+        {
+            "name": "Bambu PVA @System",
+            "sub_path": "filament/Bambu/Bambu PVA @System.json"
+        },
+        {
+            "name": "Bambu TPU 95A @System",
+            "sub_path": "filament/Bambu/Bambu TPU 95A @System.json"
+        },
+        {
+            "name": "Bambu TPU 95A HF @System",
+            "sub_path": "filament/Bambu/Bambu TPU 95A HF @System.json"
+        },
+        {
+            "name": "AliZ PETG-CF @System",
+            "sub_path": "filament/AliZ/AliZ PETG-CF @System.json"
+        },
+        {
+            "name": "AliZ PETG-Metal @System",
+            "sub_path": "filament/AliZ/AliZ PETG-Metal @System.json"
+        }
+    ]
+}
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @System.json
new file mode 100644
index 0000000..a30b343
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "setting_id": "AliZGFSA04",
+    "name": "AliZ PA-CF @System",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "AliZ PA-CF @base",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json
new file mode 100644
index 0000000..bb7b348
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json	
@@ -0,0 +1,77 @@
+{
+    "type": "filament",
+    "filament_id": "AliZ003",
+    "name": "AliZ PA-CF @base",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_pa",
+    "filament_type": [
+        "PA-CF"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "80"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "60"
+    ],
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "80"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "80"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "49.9"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_vendor": [
+        "Aliz"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature_range_high": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "pressure_advance": [
+        "0.026"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json
new file mode 100644
index 0000000..cf91e38
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "setting_id": "AliZGFSA04",
+    "name": "AliZ PETG @System",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "AliZ PETG @base",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json
new file mode 100644
index 0000000..bb4a216
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json	
@@ -0,0 +1,56 @@
+{
+    "type": "filament",
+    "filament_id": "AliZ001",
+    "name": "AliZ PETG @base",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_pet",
+    "close_fan_the_first_x_layers": [
+        "2"
+    ],
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_cost": [
+        "49.9"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Aliz"
+    ],
+    "hot_plate_temp": [
+        "79"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "79"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "pressure_advance": [
+        "0.036"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @System.json
new file mode 100644
index 0000000..f52466a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @System.json	
@@ -0,0 +1,8 @@
+{
+    "type": "filament",
+    "name": "AliZ PETG-CF @System",
+    "inherits": "AliZ PETG-CF @base",
+    "from": "system",
+    "setting_id": "AliZGFSG50",
+    "instantiation": "true"
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json
new file mode 100644
index 0000000..83da3ae
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json	
@@ -0,0 +1,74 @@
+{
+    "type": "filament",
+    "name": "AliZ PETG-CF @base",
+    "inherits": "AliZ PETG @base",
+    "filament_id": "AliZ001-1",
+    "from": "system",
+    "instantiation": "false",
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "close_fan_the_first_x_layers": [
+        "2"
+    ],
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "pressure_advance": [
+        "0.033"
+    ],
+    "fan_max_speed": [
+        "35"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "49.9"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "10"
+    ],
+    "filament_type": [
+        "PETG-CF"
+    ],
+    "filament_vendor": [
+        "Aliz"
+    ],
+    "hot_plate_temp": [
+        "79"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "79"
+    ],
+    "nozzle_temperature": [
+        "275"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "275"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @System.json
new file mode 100644
index 0000000..ba9940e
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "AliZ PETG-Metal @System",
+    "inherits": "AliZ PETG-Metal @base",
+    "from": "system",
+    "setting_id": "AliZGFSG50",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json
new file mode 100644
index 0000000..978b449
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json	
@@ -0,0 +1,65 @@
+{
+    "type": "filament",
+    "name": "AliZ PETG-Metal @base",
+    "inherits": "AliZ PETG @base",
+    "filament_id": "AliZ001-2",
+    "from": "system",
+    "instantiation": "false",
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "close_fan_the_first_x_layers": [
+        "2"
+    ],
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_cost": [
+        "49.9"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "filament_vendor": [
+        "Aliz"
+    ],
+    "hot_plate_temp": [
+        "79"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "79"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "pressure_advance": [
+        "0.036"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @System.json
new file mode 100644
index 0000000..92f0c80
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "setting_id": "AliZGFSA04",
+    "name": "AliZ PLA @System",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "AliZ PLA @base",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json
new file mode 100644
index 0000000..f8dd45e
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "AliZ PLA @base",
+    "from": "system",
+    "filament_id": "AliZ002",
+    "instantiation": "false",
+    "inherits": "fdm_filament_pla",
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_cost": [
+        "69"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_vendor": [
+        "Aliz"
+    ],
+    "filament_wipe_distance": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "pressure_advance": [
+        "0.025"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json
new file mode 100644
index 0000000..f4b66a3
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @System",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "OGFSB00",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json
new file mode 100644
index 0000000..f5d8680
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "GFB00",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json
new file mode 100644
index 0000000..a424cf4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS-GF @System",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "OGFSB50_00",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json
new file mode 100644
index 0000000..a67aa45
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json	
@@ -0,0 +1,42 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS-GF @base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "GFB50",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "fan_cooling_layer_time": [
+        "12"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.08"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "ABS-GF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "overhang_fan_speed": [
+        "30"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json
new file mode 100644
index 0000000..fb443e0
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA @System",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "OGFSB01_00",
+    "instantiation": "true",
+    "fan_min_speed": [
+        "25"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json
new file mode 100644
index 0000000..322bb35
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json	
@@ -0,0 +1,54 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA @base",
+    "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB01",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_max_speed": [
+        "35"
+    ],
+    "filament_cost": [
+        "31.99"
+    ],
+    "filament_density": [
+        "1.05"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @System.json
new file mode 100644
index 0000000..3442434
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-Aero @System",
+    "inherits": "Bambu ASA-Aero @base",
+    "from": "system",
+    "setting_id": "OGFSB02_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json
new file mode 100644
index 0000000..4cfe7de
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json	
@@ -0,0 +1,63 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-Aero @base",
+    "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB02",
+    "instantiation": "false",
+    "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.",
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_cost": [
+        "49.99"
+    ],
+    "filament_density": [
+        "0.99"
+    ],
+    "filament_flow_ratio": [
+        "0.52"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_retraction_length": [
+        "1.5"
+    ],
+    "filament_type": [
+        "ASA-Aero"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_wipe_distance": [
+        "5"
+    ],
+    "filament_z_hop_types": [
+        "Normal Lift"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "50"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @System.json
new file mode 100644
index 0000000..4b104b1
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @System",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "OGFSB51_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json
new file mode 100644
index 0000000..d8c3c0f
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json	
@@ -0,0 +1,62 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @base",
+    "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB51",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_max_speed": [
+        "25"
+    ],
+    "filament_cost": [
+        "36.99"
+    ],
+    "filament_density": [
+        "1.02"
+    ],
+    "filament_flow_ratio": [
+        "0.9"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "ASA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "275"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "275"
+    ],
+    "nozzle_temperature_range_low": [
+        "250"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "temperature_vitrification": [
+        "108"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json
new file mode 100644
index 0000000..abcbce9
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "name": "Bambu PA-CF @System",
+    "inherits": "Bambu PA-CF @base",
+    "from": "system",
+    "setting_id": "OGFSN00",
+    "instantiation": "true",
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json
new file mode 100644
index 0000000..f278ca5
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "name": "Bambu PA-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFN03",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "filament_cost": [
+        "84.99"
+    ],
+    "filament_density": [
+        "1.09"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_type": [
+        "PA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "temperature_vitrification": [
+        "170"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @System.json
new file mode 100644
index 0000000..3a1d351
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu PA6-CF @System",
+    "inherits": "Bambu PA6-CF @base",
+    "from": "system",
+    "setting_id": "OGFSN05_02",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json
new file mode 100644
index 0000000..7df1f06
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json	
@@ -0,0 +1,48 @@
+{
+    "type": "filament",
+    "name": "Bambu PA6-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFN05",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "79.99"
+    ],
+    "filament_density": [
+        "1.10"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_type": [
+        "PA6-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "275"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "275"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "temperature_vitrification": [
+        "170"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json
new file mode 100644
index 0000000..dce5c0d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json	
@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "name": "Bambu PA6-GF @System",
+    "inherits": "Bambu PA6-GF @base",
+    "from": "system",
+    "setting_id": "OGFSN08_00",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "10.5"
+    ],
+    "nozzle_temperature": [
+        "265"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "265"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json
new file mode 100644
index 0000000..e2246b0
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "name": "Bambu PA6-GF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFN08",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "59.99"
+    ],
+    "filament_density": [
+        "1.14"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_type": [
+        "PA-GF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "temperature_vitrification": [
+        "180"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @System.json
new file mode 100644
index 0000000..336e79d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu PAHT-CF @System",
+    "inherits": "Bambu PAHT-CF @base",
+    "from": "system",
+    "setting_id": "OGFSN04",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json
new file mode 100644
index 0000000..17ef395
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "name": "Bambu PAHT-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFN04",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "94.99"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_type": [
+        "PA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "temperature_vitrification": [
+        "180"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json
new file mode 100644
index 0000000..1889a50
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PC @System",
+    "inherits": "Bambu PC @base",
+    "from": "system",
+    "setting_id": "OGFSC00",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json
new file mode 100644
index 0000000..001f7c9
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "Bambu PC @base",
+    "inherits": "fdm_filament_pc",
+    "from": "system",
+    "filament_id": "GFC00",
+    "instantiation": "false",
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_cost": [
+        "39.99"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @System.json
new file mode 100644
index 0000000..61eb80d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PC FR @System",
+    "inherits": "Bambu PC FR @base",
+    "from": "system",
+    "setting_id": "OGFSC01_00",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json
new file mode 100644
index 0000000..c01a0df
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "name": "Bambu PC FR @base",
+    "inherits": "fdm_filament_pc",
+    "from": "system",
+    "filament_id": "GFC01",
+    "instantiation": "false",
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "1.19"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json
new file mode 100644
index 0000000..0ac52e4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PET-CF @System",
+    "inherits": "Bambu PET-CF @base",
+    "from": "system",
+    "setting_id": "OGFST01",
+    "instantiation": "true",
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json
new file mode 100644
index 0000000..86f36ec
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json	
@@ -0,0 +1,90 @@
+{
+    "type": "filament",
+    "name": "Bambu PET-CF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFT01",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "80"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "80"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "84.99"
+    ],
+    "filament_density": [
+        "1.29"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "PET-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "supertack_plate_temp": [
+        "80"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "temperature_vitrification": [
+        "185"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json
new file mode 100644
index 0000000..7d675a7
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG Basic @System",
+    "inherits": "Bambu PETG Basic @base",
+    "from": "system",
+    "setting_id": "OGFSG00_01",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json
new file mode 100644
index 0000000..07f8064
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json	
@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG Basic @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG00",
+    "instantiation": "false",
+    "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json
new file mode 100644
index 0000000..c9574f1
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @System",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "OGFSG02_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json
new file mode 100644
index 0000000..dc50f6b
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json	
@@ -0,0 +1,77 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG02",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.28"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json
new file mode 100644
index 0000000..d481374
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json	
@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG Translucent @System",
+    "inherits": "Bambu PETG Translucent @base",
+    "from": "system",
+    "setting_id": "OGFSG01_00",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_retraction_length": [
+        "0.3"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json
new file mode 100644
index 0000000..1582cd8
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json	
@@ -0,0 +1,78 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG Translucent @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG01",
+    "instantiation": "false",
+    "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json
new file mode 100644
index 0000000..693f5de
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG-CF @System",
+    "inherits": "Bambu PETG-CF @base",
+    "from": "system",
+    "setting_id": "OGFSG50_01",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "5"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "11.5"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json
new file mode 100644
index 0000000..89eccb7
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json	
@@ -0,0 +1,77 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG-CF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG50",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "34.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PETG-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "temperature_vitrification": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json
new file mode 100644
index 0000000..9d9470c
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Aero @System",
+    "inherits": "Bambu PLA Aero @base",
+    "from": "system",
+    "setting_id": "OGFSA11_01",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json
new file mode 100644
index 0000000..a53ae18
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Aero @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA11",
+    "instantiation": "false",
+    "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).",
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_cost": [
+        "44.99"
+    ],
+    "filament_density": [
+        "1.21"
+    ],
+    "filament_flow_ratio": [
+        "0.6"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PLA-AERO"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "nozzle_temperature_range_low": [
+        "210"
+    ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json
new file mode 100644
index 0000000..4be0932
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Basic @System",
+    "inherits": "Bambu PLA Basic @base",
+    "from": "system",
+    "setting_id": "OGFSA00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json
new file mode 100644
index 0000000..5e584c7
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json	
@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Basic @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA00",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "10%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json
new file mode 100644
index 0000000..886163c
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Dynamic @System",
+    "inherits": "Bambu PLA Dynamic @base",
+    "from": "system",
+    "setting_id": "OGFSA13_00",
+    "instantiation": "true",
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json
new file mode 100644
index 0000000..46b0345
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Dynamic @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA13",
+    "instantiation": "false",
+    "filament_cost": [
+        "31.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json
new file mode 100644
index 0000000..dc636ff
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @System",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "OGFSA15_00",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json
new file mode 100644
index 0000000..a493400
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA15",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.19"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json
new file mode 100644
index 0000000..acc74e9
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Glow @System",
+    "inherits": "Bambu PLA Glow @base",
+    "from": "system",
+    "setting_id": "OGFSA12_00",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json
new file mode 100644
index 0000000..2065782
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json	
@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Glow @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA12",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json
new file mode 100644
index 0000000..015d320
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "setting_id": "OGFSA03",
+    "name": "Bambu PLA Impact @System",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Bambu PLA Impact @base",
+    "filament_max_volumetric_speed": [
+        "23.2"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json
new file mode 100644
index 0000000..f56887a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Impact @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA03",
+    "instantiation": "false",
+    "filament_cost": [
+        "25.4"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json
new file mode 100644
index 0000000..9be06a0
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Marble @System",
+    "inherits": "Bambu PLA Marble @base",
+    "from": "system",
+    "setting_id": "OGFSA07_00",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json
new file mode 100644
index 0000000..a342531
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Marble @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA07",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.22"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json
new file mode 100644
index 0000000..901e0f9
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Matte @System",
+    "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "OGFSA01",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json
new file mode 100644
index 0000000..700253f
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json	
@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Matte @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA01",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.32"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "5%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json
new file mode 100644
index 0000000..7dfed3f
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Metal @System",
+    "inherits": "Bambu PLA Metal @base",
+    "from": "system",
+    "setting_id": "OGFSA02",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json
new file mode 100644
index 0000000..d2edaf4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Metal @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA02",
+    "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json
new file mode 100644
index 0000000..9c6d268
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Silk @System",
+    "inherits": "Bambu PLA Silk @base",
+    "from": "system",
+    "setting_id": "OGFSA05_01",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json
new file mode 100644
index 0000000..40b486e
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Silk @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA05",
+    "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.32"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_height": [
+        "5%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json
new file mode 100644
index 0000000..f36edd9
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Silk+ @System",
+    "inherits": "Bambu PLA Silk+ @base",
+    "from": "system",
+    "setting_id": "OGFSA06_00",
+    "instantiation": "true",
+    "supertack_plate_temp": [
+        "35"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "35"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json
new file mode 100644
index 0000000..550061b
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json	
@@ -0,0 +1,33 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Silk+ @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA06",
+    "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_scarf_height": [
+        "5%"
+    ],
+    "filament_scarf_seam_type": [
+        "all"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json
new file mode 100644
index 0000000..6f7ad62
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Sparkle @System",
+    "inherits": "Bambu PLA Sparkle @base",
+    "from": "system",
+    "setting_id": "OGFSA08_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json
new file mode 100644
index 0000000..02bddb8
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Sparkle @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA08",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json
new file mode 100644
index 0000000..cc54b6f
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough @System",
+    "inherits": "Bambu PLA Tough @base",
+    "from": "system",
+    "setting_id": "OGFSA09_02",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json
new file mode 100644
index 0000000..489843c
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA09",
+    "instantiation": "false",
+    "filament_cost": [
+        "28.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @System.json
new file mode 100644
index 0000000..97ac78e
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Wood @System",
+    "inherits": "Bambu PLA Wood @base",
+    "from": "system",
+    "setting_id": "OGFSA16_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json
new file mode 100644
index 0000000..4501518
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json	
@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Wood @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA16",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.21"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json
new file mode 100644
index 0000000..e8322bd
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA-CF @System",
+    "inherits": "Bambu PLA-CF @base",
+    "from": "system",
+    "setting_id": "OGFSA50_01",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json
new file mode 100644
index 0000000..b16b20c
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json	
@@ -0,0 +1,50 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA-CF @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA50",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "cool_plate_temp": [
+        "45"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "45"
+    ],
+    "filament_cost": [
+        "34.99"
+    ],
+    "filament_density": [
+        "1.22"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_type": [
+        "PLA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature_range_low": [
+        "210"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "supertack_plate_temp": [
+        "50"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "50"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json
new file mode 100644
index 0000000..aafc527
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "setting_id": "OGFSN06_00",
+    "name": "Bambu PPA-CF @System",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Bambu PPA-CF @base",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json
new file mode 100644
index 0000000..d94bae6
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu PPA-CF @base",
+    "inherits": "fdm_filament_ppa",
+    "from": "system",
+    "filament_id": "GFN06",
+    "instantiation": "false",
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials."
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json
new file mode 100644
index 0000000..cef49fe
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "name": "Bambu PPS-CF @base",
+    "inherits": "fdm_filament_pps",
+    "from": "system",
+    "filament_id": "GFT02",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "fan_max_speed": [
+        "30"
+    ],
+    "filament_cost": [
+        "175"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PPS-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature_range_low": [
+        "310"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "temperature_vitrification": [
+        "220"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json
new file mode 100644
index 0000000..60b3eeb
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PVA @System",
+    "inherits": "Bambu PVA @base",
+    "from": "system",
+    "setting_id": "OGFSS04_00",
+    "instantiation": "true",
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json
new file mode 100644
index 0000000..f939629
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json	
@@ -0,0 +1,33 @@
+{
+    "type": "filament",
+    "name": "Bambu PVA @base",
+    "inherits": "fdm_filament_pva",
+    "from": "system",
+    "filament_id": "GFS04",
+    "instantiation": "false",
+    "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
+    "filament_cost": [
+        "79.98"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "nozzle_temperature_range_low": [
+        "210"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @System.json
new file mode 100644
index 0000000..35788b3
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu Support For PA/PET @System",
+    "inherits": "Bambu Support For PA/PET @base",
+    "from": "system",
+    "setting_id": "OGFSS03_00",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json
new file mode 100644
index 0000000..3166617
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json	
@@ -0,0 +1,36 @@
+{
+    "type": "filament",
+    "name": "Bambu Support For PA/PET @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFS03",
+    "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "filament_cost": [
+        "34.99"
+    ],
+    "filament_density": [
+        "1.22"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @System.json
new file mode 100644
index 0000000..ac1fce2
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu Support For PLA @System",
+    "inherits": "Bambu Support For PLA @base",
+    "from": "system",
+    "setting_id": "OGFSS02_02",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json
new file mode 100644
index 0000000..4fda6e0
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json	
@@ -0,0 +1,33 @@
+{
+    "type": "filament",
+    "name": "Bambu Support For PLA @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFS02",
+    "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "cool_plate_temp": [
+        "40"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "40"
+    ],
+    "filament_cost": [
+        "69.98"
+    ],
+    "filament_density": [
+        "1.30"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json
new file mode 100644
index 0000000..ae15fb3
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json	
@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "name": "Bambu Support For PLA/PETG @System",
+    "inherits": "Bambu Support For PLA/PETG @base",
+    "from": "system",
+    "setting_id": "OGFSS05_00",
+    "instantiation": "true",
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json
new file mode 100644
index 0000000..6eae368
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json	
@@ -0,0 +1,60 @@
+{
+    "type": "filament",
+    "name": "Bambu Support For PLA/PETG @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFS05",
+    "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_cost": [
+        "69.98"
+    ],
+    "filament_density": [
+        "1.19"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @System.json
new file mode 100644
index 0000000..a5ac0bc
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu Support G @System",
+    "inherits": "Bambu Support G @base",
+    "from": "system",
+    "setting_id": "OGFSS01",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json
new file mode 100644
index 0000000..7a60603
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "name": "Bambu Support G @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFS01",
+    "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "filament_cost": [
+        "34.99"
+    ],
+    "filament_density": [
+        "1.22"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @System.json
new file mode 100644
index 0000000..1bfd7ac
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu Support W @System",
+    "inherits": "Bambu Support W @base",
+    "from": "system",
+    "setting_id": "OGFSS00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json
new file mode 100644
index 0000000..d94a548
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json	
@@ -0,0 +1,33 @@
+{
+    "type": "filament",
+    "name": "Bambu Support W @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFS00",
+    "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "cool_plate_temp": [
+        "40"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "40"
+    ],
+    "filament_cost": [
+        "69.98"
+    ],
+    "filament_density": [
+        "1.30"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json
new file mode 100644
index 0000000..ab731f1
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu Support for ABS @System",
+    "inherits": "Bambu Support for ABS @base",
+    "from": "system",
+    "setting_id": "OGFSS06_00",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json
new file mode 100644
index 0000000..3bd74d4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "name": "Bambu Support for ABS @base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "GFS06",
+    "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "fan_max_speed": [
+        "30"
+    ],
+    "filament_cost": [
+        "29.98"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "temperature_vitrification": [
+        "90"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json
new file mode 100644
index 0000000..9c3e244
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU 95A @System",
+    "inherits": "Bambu TPU 95A @base",
+    "from": "system",
+    "setting_id": "OGFSU00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "3.6"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json
new file mode 100644
index 0000000..eb05556
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU 95A @base",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
+    "filament_id": "GFU01",
+    "instantiation": "false",
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
+    "filament_cost": [
+        "41.99"
+    ],
+    "filament_density": [
+        "1.22"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @System.json
new file mode 100644
index 0000000..a96aacc
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU 95A HF @System",
+    "inherits": "Bambu TPU 95A HF @base",
+    "from": "system",
+    "setting_id": "OGFSU00_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json
new file mode 100644
index 0000000..6deab30
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU 95A HF @base",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
+    "filament_id": "GFU00",
+    "instantiation": "false",
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
+    "filament_cost": [
+        "41.99"
+    ],
+    "filament_density": [
+        "1.22"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_retraction_length": [
+        "0.8"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ABS @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ABS @System.json
new file mode 100644
index 0000000..518f53a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ABS @System.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "OGFSA04",
+    "name": "Generic ABS @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic ABS",
+    "inherits": "fdm_filament_abs",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ASA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ASA @System.json
new file mode 100644
index 0000000..95f34f4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ASA @System.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "OGFSA04",
+    "name": "Generic ASA @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic ASA",
+    "inherits": "fdm_filament_asa",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic BVOH @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic BVOH @System.json
new file mode 100644
index 0000000..383730d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic BVOH @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Generic BVOH @System",
+    "inherits": "fdm_filament_bvoh",
+    "from": "system",
+    "setting_id": "OGFSS97_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic EVA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic EVA @System.json
new file mode 100644
index 0000000..05fc6f7
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic EVA @System.json	
@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "name": "Generic EVA @System",
+    "inherits": "fdm_filament_eva",
+    "from": "system",
+    "setting_id": "OGFSR99_00",
+    "instantiation": "true",
+    "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic HIPS @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic HIPS @System.json
new file mode 100644
index 0000000..af3541c
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic HIPS @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Generic HIPS @System",
+    "inherits": "fdm_filament_hips",
+    "from": "system",
+    "setting_id": "OGFSS98_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA @System.json
new file mode 100644
index 0000000..4e28b8d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA @System.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFN99",
+    "setting_id": "OGFSA04",
+    "name": "Generic PA @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic PA",
+    "inherits": "fdm_filament_pa",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA-CF @System.json
new file mode 100644
index 0000000..2f91467
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA-CF @System.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "OGFSA04",
+    "name": "Generic PA-CF @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic PA-CF",
+    "inherits": "fdm_filament_pa",
+    "filament_type": [
+        "PA-CF"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PC @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PC @System.json
new file mode 100644
index 0000000..1724ee0
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PC @System.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFC99",
+    "setting_id": "OGFSA04",
+    "name": "Generic PC @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic PC",
+    "inherits": "fdm_filament_pc",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PCTG @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PCTG @System.json
new file mode 100644
index 0000000..fb402b2
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PCTG @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Generic PCTG @System",
+    "inherits": "fdm_filament_pctg",
+    "from": "system",
+    "setting_id": "OGFSG97_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE @System.json
new file mode 100644
index 0000000..9da06f5
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE @System.json	
@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "name": "Generic PE @System",
+    "inherits": "fdm_filament_pe",
+    "from": "system",
+    "setting_id": "OGFSP99_00",
+    "instantiation": "true",
+    "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE-CF @System.json
new file mode 100644
index 0000000..337d596
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Generic PE-CF @System",
+    "inherits": "fdm_filament_pe",
+    "from": "system",
+    "setting_id": "OGFSP98_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG @System.json
new file mode 100644
index 0000000..14fcba5
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG @System.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "OGFSA04",
+    "name": "Generic PETG @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic PETG",
+    "inherits": "fdm_filament_pet",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG HF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG HF @System.json
new file mode 100644
index 0000000..d749767
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG HF @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @System",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "setting_id": "OGFSG96_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json
new file mode 100644
index 0000000..e5d3427
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "name": "Generic PETG-CF @System",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "setting_id": "OGFSG50",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "5"
+    ],
+    "filament_max_volumetric_speed": [
+        "11.5"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PHA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PHA @System.json
new file mode 100644
index 0000000..8cdc772
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PHA @System.json	
@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "name": "Generic PHA @System",
+    "inherits": "fdm_filament_pha",
+    "from": "system",
+    "setting_id": "OGFSR98_00",
+    "instantiation": "true",
+    "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA @System.json
new file mode 100644
index 0000000..de33d3d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA @System.json	
@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "setting_id": "OGFSA04",
+    "name": "Generic PLA @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic PLA",
+    "inherits": "fdm_filament_pla",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json
new file mode 100644
index 0000000..b5ff0b4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json	
@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Generic PLA High Speed @System",
+    "inherits": "fdm_filament_pla",
+    "filament_id": "GFL95",
+    "from": "system",
+    "setting_id": "OGFSL95_00",
+    "instantiation": "true",
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json
new file mode 100644
index 0000000..eee0834
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Generic PLA Matte @System",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "setting_id": "OGFSL99_02",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "11"
+    ],
+    "filament_retraction_length": [
+        "0.8"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json
new file mode 100644
index 0000000..a1c7e90
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Generic PLA Silk @System",
+    "inherits": "fdm_filament_pla_silk",
+    "renamed_from": "Generic Silk PLA @System",
+    "from": "system",
+    "setting_id": "OGFSL99_01",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "7.5"
+    ],
+    "filament_retraction_length": [
+        "0.5"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json
new file mode 100644
index 0000000..d6bb799
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "filament_id": "GFL98",
+    "setting_id": "OGFSA04",
+    "name": "Generic PLA-CF @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic PLA-CF",
+    "inherits": "fdm_filament_pla",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_type": [
+        "PLA-CF"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP @System.json
new file mode 100644
index 0000000..be923c7
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP @System.json	
@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "name": "Generic PP @System",
+    "inherits": "fdm_filament_pp",
+    "from": "system",
+    "setting_id": "OGFSP97_00",
+    "instantiation": "true",
+    "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-CF @System.json
new file mode 100644
index 0000000..8919ceb
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-CF @System.json	
@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "name": "Generic PP-CF @System",
+    "inherits": "fdm_filament_pp",
+    "from": "system",
+    "setting_id": "OGFSP96_00",
+    "instantiation": "true",
+    "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.",
+    "filament_cost": [
+        "77.99"
+    ],
+    "filament_density": [
+        "1.01"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PP-CF"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-GF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-GF @System.json
new file mode 100644
index 0000000..11cebe3
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-GF @System.json	
@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "name": "Generic PP-GF @System",
+    "inherits": "fdm_filament_pp",
+    "from": "system",
+    "setting_id": "OGFSP97_03",
+    "instantiation": "true",
+    "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.",
+    "filament_cost": [
+        "59.99"
+    ],
+    "filament_density": [
+        "1.05"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PP-GF"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json
new file mode 100644
index 0000000..408d752
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json	
@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "name": "Generic PPA-CF @System",
+    "inherits": "fdm_filament_ppa",
+    "from": "system",
+    "setting_id": "OGFSN97_00",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "35"
+    ],
+    "filament_max_volumetric_speed": [
+        "6.5"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "filament_type": [
+        "PPA-CF"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json
new file mode 100644
index 0000000..57ee347
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Generic PPA-GF @System",
+    "inherits": "fdm_filament_ppa",
+    "filament_id": "GFN96",
+    "from": "system",
+    "setting_id": "OGFSN96_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PPA-GF"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PVA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PVA @System.json
new file mode 100644
index 0000000..20b1c49
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PVA @System.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFS99",
+    "setting_id": "OGFSA04",
+    "name": "Generic PVA @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic PVA",
+    "inherits": "fdm_filament_pva",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic SBS @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic SBS @System.json
new file mode 100644
index 0000000..3847e37
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic SBS @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Generic SBS @System",
+    "inherits": "fdm_filament_sbs",
+    "from": "system",
+    "setting_id": "OGFSL99",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic TPU @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic TPU @System.json
new file mode 100644
index 0000000..137d30d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic TPU @System.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFU99",
+    "setting_id": "OGFSA04",
+    "name": "Generic TPU @System",
+    "from": "system",
+    "instantiation": "true",
+    "renamed_from": "My Generic TPU",
+    "inherits": "fdm_filament_tpu",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json
new file mode 100644
index 0000000..c0fa43d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Overture Matte PLA @System",
+    "inherits": "Overture Matte PLA @base",
+    "from": "system",
+    "setting_id": "OGFSL05_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @base.json
new file mode 100644
index 0000000..7e9e9a1
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @base.json	
@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Overture Matte PLA @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL05",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.52"
+    ],
+    "filament_density": [
+        "1.22"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Overture"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json
new file mode 100644
index 0000000..cdaf7e6
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Overture PLA @System",
+    "inherits": "Overture PLA @base",
+    "from": "system",
+    "setting_id": "OGFSL04_05",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @base.json
new file mode 100644
index 0000000..18e711b
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @base.json	
@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Overture PLA @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL04",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.15"
+    ],
+    "filament_density": [
+        "1.2"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Overture"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @System.json
new file mode 100644
index 0000000..0b8c00c
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA12-CF @System",
+    "inherits": "Fiberon PA12-CF @base",
+    "from": "system",
+    "setting_id": "OGFSL52_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @base.json
new file mode 100644
index 0000000..e2a5bf6
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @base.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA12-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL52",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "99.99"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "filament_type": [
+        "PA-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "131"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json
new file mode 100644
index 0000000..1b0e99f
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-CF @System",
+    "inherits": "Fiberon PA6-CF @base",
+    "from": "system",
+    "setting_id": "OGFSL50_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json
new file mode 100644
index 0000000..9d59fba
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json	
@@ -0,0 +1,68 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL50",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "83.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PA6-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "215"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @System.json
new file mode 100644
index 0000000..f774cf1
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-GF @System",
+    "inherits": "Fiberon PA6-GF @base",
+    "from": "system",
+    "setting_id": "OGFSL51_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @base.json
new file mode 100644
index 0000000..9ab9237
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @base.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-GF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL51",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "63.99"
+    ],
+    "filament_density": [
+        "1.2"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PA-GF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "191"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @System.json
new file mode 100644
index 0000000..7f297ae
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA612-CF @System",
+    "inherits": "Fiberon PA612-CF @base",
+    "from": "system",
+    "setting_id": "OGFSL53_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @base.json
new file mode 100644
index 0000000..f545b1e
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @base.json	
@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA612-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL53",
+    "instantiation": "false",
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "94.99"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "temperature_vitrification": [
+        "180"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @System.json
new file mode 100644
index 0000000..9a0d2ed
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Fiberon PET-CF @System",
+    "inherits": "Fiberon PET-CF @base",
+    "from": "system",
+    "setting_id": "OGFSL54_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json
new file mode 100644
index 0000000..701883f
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json	
@@ -0,0 +1,86 @@
+{
+    "type": "filament",
+    "name": "Fiberon PET-CF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL54",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "242"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "89.99"
+    ],
+    "filament_density": [
+        "1.34"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PET-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_high": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "supertack_plate_temp": [
+        "80"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "147"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @System.json
new file mode 100644
index 0000000..14bca9c
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-ESD @System",
+    "inherits": "Fiberon PETG-ESD @base",
+    "from": "system",
+    "setting_id": "OGFSL06_00",
+    "instantiation": "true",
+    "filament_cost": [
+        "29.99"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json
new file mode 100644
index 0000000..03c777e
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json	
@@ -0,0 +1,74 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-ESD @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL06",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "250"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "76"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @System.json
new file mode 100644
index 0000000..5c661c1
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-rCF @System",
+    "inherits": "Fiberon PETG-rCF @base",
+    "from": "system",
+    "setting_id": "OGFSL55_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json
new file mode 100644
index 0000000..e039bd5
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json	
@@ -0,0 +1,77 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-rCF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL55",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "12"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "39.99"
+    ],
+    "filament_density": [
+        "1.3"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PETG-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @System.json
new file mode 100644
index 0000000..2ee4e44
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "PolyLite ABS @System",
+    "inherits": "PolyLite ABS @base",
+    "from": "system",
+    "setting_id": "OGFSB60_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @base.json
new file mode 100644
index 0000000..539a1d1
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @base.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "PolyLite ABS @base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "GFB60",
+    "instantiation": "false",
+    "filament_cost": [
+        "26.9"
+    ],
+    "filament_density": [
+        "1.03"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @System.json
new file mode 100644
index 0000000..09128d7
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "PolyLite ASA @System",
+    "inherits": "PolyLite ASA @base",
+    "from": "system",
+    "setting_id": "OGFSB61_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @base.json
new file mode 100644
index 0000000..d29a9a2
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @base.json	
@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "PolyLite ASA @base",
+    "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB61",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "filament_cost": [
+        "23.6"
+    ],
+    "filament_density": [
+        "1.02"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite Dual PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite Dual PLA @System.json
new file mode 100644
index 0000000..24d06bf
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite Dual PLA @System.json	
@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "from": "system",
+    "instantiation": "true",
+    "name": "PolyLite Dual PLA @System",
+    "renamed_from": "PolyLite Dual PLA",
+    "setting_id": "O64868365",
+    "inherits": "PolyLite PLA @base",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @System.json
new file mode 100644
index 0000000..f9bafce
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "PolyLite PETG @System",
+    "inherits": "PolyLite PETG @base",
+    "from": "system",
+    "setting_id": "OGFSG60_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "11.5"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json
new file mode 100644
index 0000000..f010031
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json	
@@ -0,0 +1,59 @@
+{
+    "type": "filament",
+    "name": "PolyLite PETG @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG60",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "90"
+    ],
+    "fan_min_speed": [
+        "40"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json
new file mode 100644
index 0000000..b779aeb
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "PolyLite PLA @System",
+    "inherits": "PolyLite PLA @base",
+    "from": "system",
+    "setting_id": "OGFSL19",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @base.json
new file mode 100644
index 0000000..1e7f4d1
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @base.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "PolyLite PLA @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL00",
+    "instantiation": "false",
+    "filament_cost": [
+        "25.4"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra Dual PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra Dual PLA @System.json
new file mode 100644
index 0000000..b2b4efd
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra Dual PLA @System.json	
@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "from": "system",
+    "instantiation": "true",
+    "name": "PolyTerra Dual PLA @System",
+    "renamed_from": "PolyTerra Dual PLA",
+    "setting_id": "O1258005940",
+    "inherits": "PolyTerra PLA @base",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @System.json
new file mode 100644
index 0000000..b6def8a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @System.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "PolyTerra PLA @System",
+    "inherits": "PolyTerra PLA @base",
+    "renamed_from": "PolyTerra PLA",
+    "from": "system",
+    "setting_id": "OGFSL18",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @base.json
new file mode 100644
index 0000000..2deb2d9
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @base.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "name": "PolyTerra PLA @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL01",
+    "instantiation": "false",
+    "filament_cost": [
+        "25.4"
+    ],
+    "filament_density": [
+        "1.31"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json
new file mode 100644
index 0000000..c178dd7
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "SUNLU PLA Marble @System",
+    "inherits": "SUNLU PLA Marble @base",
+    "from": "system",
+    "setting_id": "OSNLS06",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json
new file mode 100644
index 0000000..5448265
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "name": "SUNLU PLA Marble @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFSNL06",
+    "instantiation": "false",
+    "filament_cost": [
+        "31.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "SUNLU"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @System.json
new file mode 100644
index 0000000..76cffa6
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @System.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "SUNLU PETG @System",
+    "inherits": "SUNLU PETG @base",
+    "from": "system",
+    "setting_id": "OSNLS08",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json
new file mode 100644
index 0000000..9d27244
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json	
@@ -0,0 +1,81 @@
+{
+    "type": "filament",
+    "name": "SUNLU PETG @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFSNL08",
+    "instantiation": "false",
+    "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "22.99"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "SUNLU"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "temperature_vitrification": [
+        "68"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json
new file mode 100644
index 0000000..db115c3
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "SUNLU PLA Matte @System",
+    "inherits": "SUNLU PLA Matte @base",
+    "from": "system",
+    "setting_id": "OSNLS02",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json
new file mode 100644
index 0000000..a79b7b6
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json	
@@ -0,0 +1,50 @@
+{
+    "type": "filament",
+    "name": "SUNLU PLA Matte @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFSNL02",
+    "instantiation": "false",
+    "filament_cost": [
+        "25.99"
+    ],
+    "filament_density": [
+        "1.3"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "SUNLU"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "5%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
+    "temperature_vitrification": [
+        "54"
+    ],
+    "nozzle_temperature_range_high": [
+        "245"
+    ],
+    "nozzle_temperature_range_low": [
+        "205"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json
new file mode 100644
index 0000000..82bc7ae
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "SUNLU PLA+ 2.0 @System",
+    "inherits": "SUNLU PLA+ 2.0 @base",
+    "from": "system",
+    "setting_id": "OSNLS04",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json
new file mode 100644
index 0000000..eddb7e9
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "SUNLU PLA+ 2.0 @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFSNL04",
+    "instantiation": "false",
+    "filament_cost": [
+        "18.99"
+    ],
+    "filament_density": [
+        "1.21"
+    ],
+    "filament_flow_ratio": [
+        "1.0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],    
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "SUNLU"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "5%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
+    "temperature_vitrification": [
+        "54"
+    ]
+}
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json
new file mode 100644
index 0000000..e341ff4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "SUNLU PLA+ @System",
+    "inherits": "SUNLU PLA+ @base",
+    "from": "system",
+    "setting_id": "OSNLS03",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json
new file mode 100644
index 0000000..e7efac8
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "SUNLU PLA+ @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFSNL03",
+    "instantiation": "false",
+    "filament_cost": [
+        "18.99"
+    ],
+    "filament_density": [
+        "1.23"
+    ],
+    "filament_flow_ratio": [
+        "1.0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],    
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "SUNLU"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "5%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
+    "temperature_vitrification": [
+        "54"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json
new file mode 100644
index 0000000..1d35100
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "SUNLU Silk PLA+ @System",
+    "inherits": "SUNLU Silk PLA+ @base",
+    "from": "system",
+    "setting_id": "OSNLS05",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json
new file mode 100644
index 0000000..5b8fd61
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json	
@@ -0,0 +1,51 @@
+{
+    "type": "filament",
+    "name": "SUNLU Silk PLA+ @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFSNL05",
+    "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],    
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "SUNLU"
+    ],
+    "filament_scarf_height": [
+        "5%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "54"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @System.json
new file mode 100644
index 0000000..82ab22e
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "SUNLU Wood PLA @System",
+    "inherits": "SUNLU Wood PLA @base",
+    "from": "system",
+    "setting_id": "OSNLS07",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json
new file mode 100644
index 0000000..65af44e
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json	
@@ -0,0 +1,53 @@
+{
+    "type": "filament",
+    "name": "SUNLU Wood PLA @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFSNL07",
+    "instantiation": "false",
+    "filament_cost": [
+        "26.99"
+    ],
+    "filament_density": [
+        "1.10"
+    ],
+    "filament_flow_ratio": [
+        "1.0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_retraction_length": [
+        "4"
+    ],
+    "filament_retraction_speed": [
+        "50"
+    ],
+    "filament_deretraction_speed": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "SUNLU"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "5%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
+    "temperature_vitrification": [
+        "54"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
new file mode 100644
index 0000000..e5db0db
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
@@ -0,0 +1,94 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_abs",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "105"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "105"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "105"
+    ],
+    "filament_flow_ratio": [
+        "0.926"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
new file mode 100644
index 0000000..fd8ea36
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
@@ -0,0 +1,94 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_asa",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "105"
+    ],
+    "fan_cooling_layer_time": [
+        "35"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "ASA"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "105"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "105"
+    ],
+    "filament_flow_ratio": [
+        "0.926"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
new file mode 100644
index 0000000..1e2a275
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
@@ -0,0 +1,89 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_bvoh",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "filament_id": "GFS97",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "40"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "40"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "69.99"
+    ],
+    "filament_density": [
+        "1.13"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "BVOH"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_common.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
new file mode 100644
index 0000000..70862e9
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
@@ -0,0 +1,187 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "0"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "60"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "35"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "0"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "0"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_settings_id": [
+        ""
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_vendor": [
+        "Generic"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "supertack_plate_temp": [
+        "45"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "45"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode\n"
+    ],
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
new file mode 100644
index 0000000..9e77bf4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_eva",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFR99",
+    "from": "system",
+    "instantiation": "false",
+    "filament_type": [
+        "EVA"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
new file mode 100644
index 0000000..ce42a7a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
@@ -0,0 +1,86 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_hips",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFS98",
+    "from": "system",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "90"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "textured_plate_temp": [
+        "90"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "90"
+    ],
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "HIPS"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_cost": [
+        "22.99"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
new file mode 100644
index 0000000..3c7c03a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
@@ -0,0 +1,89 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pa",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFN99",
+    "from": "system",
+    "instantiation": "false",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "4"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "PA"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature_range_high": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "30"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "108"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
new file mode 100644
index 0000000..ba79aff
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
@@ -0,0 +1,92 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pc",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFC99",
+    "from": "system",
+    "instantiation": "false",
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "110"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "110"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_type": [
+        "PC"
+    ],
+    "hot_plate_temp": [
+        "110"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "110"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "60"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "120"
+    ],
+    "textured_plate_temp": [
+        "110"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "110"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
new file mode 100644
index 0000000..21eb7ed
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
@@ -0,0 +1,68 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pctg",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFG97",
+    "from": "system",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PCTG"
+    ],
+    "hot_plate_temp": [
+        "80"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "80"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
new file mode 100644
index 0000000..d15ac9a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
@@ -0,0 +1,89 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pe",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFP99",
+    "from": "system",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "35"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PE"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
new file mode 100644
index 0000000..f4a31b7
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
@@ -0,0 +1,68 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pet",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFG99",
+    "from": "system",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PETG"
+    ],
+    "hot_plate_temp": [
+        "80"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "70"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "70"
+    ],
+    "temperature_vitrification": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "80"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
new file mode 100644
index 0000000..35d3c9a
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
@@ -0,0 +1,89 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pha",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFR98",
+    "from": "system",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "35"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "27.99"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PHA"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "120"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
new file mode 100644
index 0000000..45e21a4
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
@@ -0,0 +1,89 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pla",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "filament_id": "GFL99",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "35"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_gap": [
+        "15%"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
new file mode 100644
index 0000000..9e407db
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pla_silk",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL96",
+    "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
new file mode 100644
index 0000000..bd6701b
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
@@ -0,0 +1,89 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pp",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFP97",
+    "from": "system",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "35"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "34.99"
+    ],
+    "filament_density": [
+        "0.93"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PP"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "nozzle_temperature": [
+        "235"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "235"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
new file mode 100644
index 0000000..19409ea
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
@@ -0,0 +1,95 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_ppa",
+    "inherits": "fdm_filament_common",
+    "filament_id": "GFN97",
+    "from": "system",
+    "instantiation": "false",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "PPA-CF"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature_range_high": [
+        "320"
+    ],
+    "nozzle_temperature_range_low": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "210"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
new file mode 100644
index 0000000..b8d3661
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
@@ -0,0 +1,85 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pps",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "110"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "110"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_density": [
+        "1.36"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_max_volumetric_speed": [
+        "4"
+    ],
+    "filament_type": [
+        "PPS"
+    ],
+    "hot_plate_temp": [
+        "110"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "110"
+    ],
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "nozzle_temperature_range_high": [
+        "340"
+    ],
+    "nozzle_temperature_range_low": [
+        "300"
+    ],
+    "overhang_fan_speed": [
+        "30"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "temperature_vitrification": [
+        "125"
+    ],
+    "textured_plate_temp": [
+        "110"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "110"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
new file mode 100644
index 0000000..1b55c2b
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
@@ -0,0 +1,97 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pva",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "45"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "45"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_soluble": [
+        "1"
+    ],
+    "filament_type": [
+        "PVA"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "35"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "35"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
new file mode 100644
index 0000000..69ce757
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
@@ -0,0 +1,83 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_sbs",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "filament_id": "GFL99",
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+      "SBS"
+    ],
+    "filament_density": [
+        "1.02"
+    ],
+    "filament_cost": [
+        "15"
+    ],
+    "cool_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "235"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "nozzle_temperature": [
+        "235"
+    ],
+    "temperature_vitrification": [
+        "70"
+    ],
+    "nozzle_temperature_range_low": [
+        "215"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "additional_cooling_fan_speed": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
new file mode 100644
index 0000000..cc84b4d
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_tpu",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "cool_plate_temp": [
+        "30"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "30"
+    ],
+    "eng_plate_temp": [
+        "30"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "30"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "hot_plate_temp": [
+        "35"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "35"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "30"
+    ],
+    "textured_plate_temp": [
+        "35"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "35"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @System.json
new file mode 100644
index 0000000..eacb079
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "eSUN PETG @System",
+    "inherits": "eSUN PETG @base",
+    "from": "system",
+    "setting_id": "PET01_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @base.json
new file mode 100644
index 0000000..3a44923
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @base.json	
@@ -0,0 +1,54 @@
+{
+    "type": "filament",
+    "name": "eSUN PETG @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "ESN03",
+    "instantiation": "false",
+    "filament_vendor": [
+        "eSUN"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "temperature_vitrification": [
+        "64"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": []
+}
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @System.json
new file mode 100644
index 0000000..f72868f
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "eSUN PLA+ @System",
+    "inherits": "eSUN PLA+ @base",
+    "from": "system",
+    "setting_id": "OGFSL03_00",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @base.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @base.json
new file mode 100644
index 0000000..ac6bcd0
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @base.json	
@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "eSUN PLA+ @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL03",
+    "instantiation": "false",
+    "filament_cost": [
+        "22.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "eSUN"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ]
+}
\ No newline at end of file
diff --git a/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json
new file mode 100644
index 0000000..e56766f
--- /dev/null
+++ b/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "eSUN ePLA-LW @System",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "ESN02",
+    "setting_id": "LWSL02_00",
+    "instantiation": "true",
+    "filament_type": ["PLA-AERO"],
+    "filament_cost": [
+        "33.99"
+    ],
+    "filament_density": [
+        "1.2"
+    ],
+    "filament_flow_ratio": [
+        "0.48"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_vendor": [
+        "eSUN"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "nozzle_temperature": [
+        "243"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "243"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "temperature_vitrification": [
+        "53"
+    ],
+    "compatible_printers": []
+}
diff --git a/OrcaSlicer/user/default/filament/Arianeplast PETG @ Ender3k.info b/OrcaSlicer/user/default/filament/Arianeplast PETG @ Ender3k.info
new file mode 100644
index 0000000..ff14c9b
--- /dev/null
+++ b/OrcaSlicer/user/default/filament/Arianeplast PETG @ Ender3k.info	
@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1747096920
diff --git a/OrcaSlicer/user/default/filament/Arianeplast PETG @ Ender3k.json b/OrcaSlicer/user/default/filament/Arianeplast PETG @ Ender3k.json
new file mode 100644
index 0000000..7873543
--- /dev/null
+++ b/OrcaSlicer/user/default/filament/Arianeplast PETG @ Ender3k.json	
@@ -0,0 +1,25 @@
+{
+    "filament_settings_id": [
+        "Arianeplast PETG @ Ender3k"
+    ],
+    "filament_vendor": [
+        "Arianeplast"
+    ],
+    "from": "User",
+    "inherits": "Creality Generic PETG",
+    "is_custom_defined": "0",
+    "name": "Arianeplast PETG @ Ender3k",
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "version": "2.3.0.3"
+}
diff --git a/OrcaSlicer/user/default/filament/Geeetech PLA @ Artillery SWX4P.info b/OrcaSlicer/user/default/filament/Geeetech PLA @ Artillery SWX4P.info
new file mode 100644
index 0000000..b340a0d
--- /dev/null
+++ b/OrcaSlicer/user/default/filament/Geeetech PLA @ Artillery SWX4P.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 1741701894
diff --git a/OrcaSlicer/user/default/filament/Geeetech PLA @ Artillery SWX4P.json b/OrcaSlicer/user/default/filament/Geeetech PLA @ Artillery SWX4P.json
new file mode 100644
index 0000000..84c9bc9
--- /dev/null
+++ b/OrcaSlicer/user/default/filament/Geeetech PLA @ Artillery SWX4P.json	
@@ -0,0 +1,28 @@
+{
+    "compatible_printers": [
+        "Artillery SWX4 Pro 0.4 nozzle"
+    ],
+    "filament_settings_id": [
+        "Geeetech PLA @ Artillery SWX4P"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_vendor": [
+        "Geeetech"
+    ],
+    "from": "User",
+    "inherits": "Artillery PLA Basic",
+    "is_custom_defined": "0",
+    "name": "Geeetech PLA @ Artillery SWX4P",
+    "pressure_advance": [
+        "0.025"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "version": "2.3.0.1"
+}
diff --git a/OrcaSlicer/user/default/filament/Geeetech PLA @ Ender3k.info b/OrcaSlicer/user/default/filament/Geeetech PLA @ Ender3k.info
new file mode 100644
index 0000000..b1d4976
--- /dev/null
+++ b/OrcaSlicer/user/default/filament/Geeetech PLA @ Ender3k.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1741888782
diff --git a/OrcaSlicer/user/default/filament/Geeetech PLA @ Ender3k.json b/OrcaSlicer/user/default/filament/Geeetech PLA @ Ender3k.json
new file mode 100644
index 0000000..d46024a
--- /dev/null
+++ b/OrcaSlicer/user/default/filament/Geeetech PLA @ Ender3k.json	
@@ -0,0 +1,40 @@
+{
+    "compatible_printers": [
+        "Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle"
+    ],
+    "compatible_prints": [
+        "0.20mm Standard @Creality Ender3K"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "filament_cost": [
+        "19"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_settings_id": [
+        "Geeetech PLA @ Ender3k"
+    ],
+    "filament_vendor": [
+        "Geeetech"
+    ],
+    "from": "User",
+    "inherits": "Creality Generic PLA",
+    "is_custom_defined": "0",
+    "name": "Geeetech PLA @ Ender3k",
+    "nozzle_temperature": [
+        "210"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.025"
+    ],
+    "temperature_vitrification": [
+        "190"
+    ],
+    "version": "2.3.0.2"
+}
diff --git a/OrcaSlicer/user/default/filament/Overture PETG @ Artillery SWX4P.info b/OrcaSlicer/user/default/filament/Overture PETG @ Artillery SWX4P.info
new file mode 100644
index 0000000..e698226
--- /dev/null
+++ b/OrcaSlicer/user/default/filament/Overture PETG @ Artillery SWX4P.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 1741888782
diff --git a/OrcaSlicer/user/default/filament/Overture PETG @ Artillery SWX4P.json b/OrcaSlicer/user/default/filament/Overture PETG @ Artillery SWX4P.json
new file mode 100644
index 0000000..1dfd140
--- /dev/null
+++ b/OrcaSlicer/user/default/filament/Overture PETG @ Artillery SWX4P.json	
@@ -0,0 +1,34 @@
+{
+    "compatible_printers": [
+        "Artillery SWX4 Pro 0.4 nozzle"
+    ],
+    "filament_retraction_length": [
+        "3"
+    ],
+    "filament_retraction_speed": [
+        "25"
+    ],
+    "filament_settings_id": [
+        "Overture PETG @ Artillery SWX4P"
+    ],
+    "from": "User",
+    "inherits": "Artillery PETG",
+    "is_custom_defined": "0",
+    "name": "Overture PETG @ Artillery SWX4P",
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "pressure_advance": [
+        "0.08"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "version": "2.3.0.2"
+}
diff --git a/OrcaSlicer/user/default/machine/Artillery SWX4 Pro 0.4 nozzle.info b/OrcaSlicer/user/default/machine/Artillery SWX4 Pro 0.4 nozzle.info
new file mode 100644
index 0000000..3390b97
--- /dev/null
+++ b/OrcaSlicer/user/default/machine/Artillery SWX4 Pro 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM007
+updated_time = 1741701894
diff --git a/OrcaSlicer/user/default/machine/Artillery SWX4 Pro 0.4 nozzle.json b/OrcaSlicer/user/default/machine/Artillery SWX4 Pro 0.4 nozzle.json
new file mode 100644
index 0000000..f9f52dc
--- /dev/null
+++ b/OrcaSlicer/user/default/machine/Artillery SWX4 Pro 0.4 nozzle.json	
@@ -0,0 +1,21 @@
+{
+    "bed_custom_model": "/Users/mbocquet/OrcaSlicer plates/ASWX4/ASWX4.stl",
+    "bed_custom_texture": "/Users/mbocquet/OrcaSlicer plates/ASWX4/ASWX4.png",
+    "before_layer_change_gcode": "\nTIMELAPSE_TAKE_FRAME",
+    "change_filament_gcode": "M600",
+    "from": "User",
+    "inherits": "Artillery Sidewinder X4 Pro 0.4 nozzle",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\nG92 E0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nSTART_PRINT BED_TEMP={first_layer_bed_temperature[current_extruder]} VITRIFICATION_TEMP={temperature_vitrification[current_extruder]} NOZZLE_TEMP={first_layer_temperature[current_extruder]}",
+    "manual_filament_change": "1",
+    "name": "Artillery SWX4 Pro 0.4 nozzle",
+    "print_host": "192.168.10.245:81",
+    "printer_settings_id": "Artillery SWX4 Pro 0.4 nozzle",
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "support_multi_bed_types": "1",
+    "version": "2.3.0.1"
+}
diff --git a/OrcaSlicer/user/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.info b/OrcaSlicer/user/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.info
new file mode 100644
index 0000000..f895871
--- /dev/null
+++ b/OrcaSlicer/user/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1741701894
diff --git a/OrcaSlicer/user/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.json b/OrcaSlicer/user/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.json
new file mode 100644
index 0000000..9460bb7
--- /dev/null
+++ b/OrcaSlicer/user/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.json	
@@ -0,0 +1,57 @@
+{
+    "bed_custom_texture": "/Users/mbocquet/OrcaSlicer plates/Ender3/Ender3-v2.png",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME",
+    "deretraction_speed": [
+        "0"
+    ],
+    "from": "User",
+    "gcode_flavor": "klipper",
+    "inherits": "Creality Ender-3 0.4 nozzle",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+    "machine_end_gcode": "PRINT_END",
+    "machine_max_acceleration_x": [
+        "3000",
+        "500"
+    ],
+    "machine_max_acceleration_y": [
+        "3000",
+        "500"
+    ],
+    "machine_max_speed_x": [
+        "400",
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "400",
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "10"
+    ],
+    "machine_start_gcode": "M117\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nPRINT_START BED_TEMP={first_layer_bed_temperature[current_extruder]} VITRIFICATION_TEMP={temperature_vitrification[current_extruder]} NOZZLE_TEMP={first_layer_temperature[current_extruder]}",
+    "manual_filament_change": "1",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "name": "Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle",
+    "nozzle_type": "brass",
+    "print_host": "192.168.10.84:81",
+    "printer_settings_id": "Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle",
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retraction_length": [
+        "1.3"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "support_multi_bed_types": "1",
+    "thumbnails": "300x300/PNG",
+    "version": "2.3.0.1",
+    "wipe": [
+        "0"
+    ]
+}
diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Artillery SWX4P 0.4 nozzle.info b/OrcaSlicer/user/default/process/0.20mm Standard @Artillery SWX4P 0.4 nozzle.info
new file mode 100644
index 0000000..b340a0d
--- /dev/null
+++ b/OrcaSlicer/user/default/process/0.20mm Standard @Artillery SWX4P 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 1741701894
diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Artillery SWX4P 0.4 nozzle.json b/OrcaSlicer/user/default/process/0.20mm Standard @Artillery SWX4P 0.4 nozzle.json
new file mode 100644
index 0000000..93e7e88
--- /dev/null
+++ b/OrcaSlicer/user/default/process/0.20mm Standard @Artillery SWX4P 0.4 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "brim_type": "no_brim",
+    "exclude_object": "1",
+    "filename_format": "{input_filename_base}_X4Pro_{filament_type[initial_tool]}_{print_time}.gcode",
+    "from": "User",
+    "gcode_label_objects": "1",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "inner_wall_speed": "50",
+    "is_custom_defined": "0",
+    "name": "0.20mm Standard @Artillery SWX4P 0.4 nozzle",
+    "outer_wall_speed": "40",
+    "print_settings_id": "0.20mm Standard @Artillery SWX4P 0.4 nozzle",
+    "skirt_distance": "5",
+    "skirt_loops": "3",
+    "sparse_infill_pattern": "cubic",
+    "version": "2.3.0.1"
+}
diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Creality Ender3K.info b/OrcaSlicer/user/default/process/0.20mm Standard @Creality Ender3K.info
new file mode 100644
index 0000000..18eb364
--- /dev/null
+++ b/OrcaSlicer/user/default/process/0.20mm Standard @Creality Ender3K.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1742923665
diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Creality Ender3K.json b/OrcaSlicer/user/default/process/0.20mm Standard @Creality Ender3K.json
new file mode 100644
index 0000000..a6df1d4
--- /dev/null
+++ b/OrcaSlicer/user/default/process/0.20mm Standard @Creality Ender3K.json	
@@ -0,0 +1,15 @@
+{
+    "exclude_object": "1",
+    "filename_format": "{input_filename_base}_Ender3K_{filament_type[initial_tool]}_{print_time}.gcode",
+    "from": "User",
+    "gap_fill_target": "everywhere",
+    "inherits": "0.20mm Standard @Creality Ender3",
+    "is_custom_defined": "0",
+    "name": "0.20mm Standard @Creality Ender3K",
+    "print_settings_id": "0.20mm Standard @Creality Ender3K",
+    "skirt_distance": "5",
+    "skirt_height": "1",
+    "skirt_loops": "3",
+    "sparse_infill_pattern": "triangles",
+    "version": "2.3.0.2"
+}
diff --git a/OrcaSlicer/user/hints.cereal b/OrcaSlicer/user/hints.cereal
new file mode 100644
index 0000000000000000000000000000000000000000..32354e902f066d3296273d77500be8ea6e7d086f
GIT binary patch
literal 12
KcmZQ%KmY&$7ytqQ

literal 0
HcmV?d00001

diff --git a/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Artillery SWX4P.info b/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Artillery SWX4P.info
new file mode 100644
index 0000000..b340a0d
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Artillery SWX4P.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 1741701894
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Artillery SWX4P.json b/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Artillery SWX4P.json
new file mode 100644
index 0000000..2788519
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Artillery SWX4P.json	
@@ -0,0 +1,31 @@
+{
+    "filament_settings_id": [
+        "Geeetech PLA @ Artillery SWX4P"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_vendor": [
+        "Geeetech"
+    ],
+    "from": "User",
+    "inherits": "Artillery PLA Basic",
+    "is_custom_defined": "0",
+    "name": "Geeetech PLA @ Artillery SWX4P",
+    "nozzle_temperature": [
+        "200"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "pressure_advance": [
+        "0.025"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "version": "2.3.0.1"
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Ender3.info b/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Ender3.info
new file mode 100644
index 0000000..b1d4976
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Ender3.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GFSA04
+updated_time = 1741888782
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Ender3.json b/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Ender3.json
new file mode 100644
index 0000000..cf9e29f
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/filament/Geeetech PLA @ Ender3.json	
@@ -0,0 +1,22 @@
+{
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "filament_settings_id": [
+        "Geeetech PLA @ Ender3"
+    ],
+    "from": "User",
+    "inherits": "Creality Generic PLA",
+    "is_custom_defined": "0",
+    "name": "Geeetech PLA @ Ender3",
+    "nozzle_temperature": [
+        "200"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "pressure_advance": [
+        "0.025"
+    ],
+    "version": "2.3.0.2"
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/filament/Overture PETG @ Artillery SWX4P.info b/OrcaSlicer/user_backup-v2.3.0/default/filament/Overture PETG @ Artillery SWX4P.info
new file mode 100644
index 0000000..e698226
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/filament/Overture PETG @ Artillery SWX4P.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 1741888782
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/filament/Overture PETG @ Artillery SWX4P.json b/OrcaSlicer/user_backup-v2.3.0/default/filament/Overture PETG @ Artillery SWX4P.json
new file mode 100644
index 0000000..c8d1540
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/filament/Overture PETG @ Artillery SWX4P.json	
@@ -0,0 +1,31 @@
+{
+    "filament_retraction_length": [
+        "3"
+    ],
+    "filament_retraction_speed": [
+        "25"
+    ],
+    "filament_settings_id": [
+        "Overture PETG @ Artillery SWX4P"
+    ],
+    "from": "User",
+    "inherits": "Artillery PETG",
+    "is_custom_defined": "0",
+    "name": "Overture PETG @ Artillery SWX4P",
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "pressure_advance": [
+        "0.08"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "version": "2.3.0.2"
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/machine/Artillery SWX4 Pro 0.4 nozzle.info b/OrcaSlicer/user_backup-v2.3.0/default/machine/Artillery SWX4 Pro 0.4 nozzle.info
new file mode 100644
index 0000000..3390b97
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/machine/Artillery SWX4 Pro 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM007
+updated_time = 1741701894
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/machine/Artillery SWX4 Pro 0.4 nozzle.json b/OrcaSlicer/user_backup-v2.3.0/default/machine/Artillery SWX4 Pro 0.4 nozzle.json
new file mode 100644
index 0000000..e45bf97
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/machine/Artillery SWX4 Pro 0.4 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "bed_custom_model": "/Users/mbocquet/OrcaSlicer plates/ASWX4/ASWX4.stl",
+    "bed_custom_texture": "/Users/mbocquet/OrcaSlicer plates/ASWX4/ASWX4.png",
+    "change_filament_gcode": "M600",
+    "from": "User",
+    "inherits": "Artillery Sidewinder X4 Pro 0.4 nozzle",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\nG92 E0",
+    "machine_end_gcode": "END_PRINT",
+    "machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nSTART_PRINT BED_TEMP={first_layer_bed_temperature[current_extruder]} VITRIFICATION_TEMP={temperature_vitrification[current_extruder]} NOZZLE_TEMP={first_layer_temperature[current_extruder]}",
+    "manual_filament_change": "1",
+    "name": "Artillery SWX4 Pro 0.4 nozzle",
+    "print_host": "192.168.10.245:81",
+    "printer_settings_id": "Artillery SWX4 Pro 0.4 nozzle",
+    "support_multi_bed_types": "1",
+    "version": "2.3.0.1"
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 Klipper 0.4 nozzle.info b/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 Klipper 0.4 nozzle.info
new file mode 100644
index 0000000..f895871
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 Klipper 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1741701894
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 Klipper 0.4 nozzle.json b/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 Klipper 0.4 nozzle.json
new file mode 100644
index 0000000..9d6936b
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 Klipper 0.4 nozzle.json	
@@ -0,0 +1,36 @@
+{
+    "bed_custom_texture": "/Users/mbocquet/OrcaSlicer plates/Ender3/Ender3-v2.png",
+    "deretraction_speed": [
+        "0"
+    ],
+    "from": "User",
+    "gcode_flavor": "klipper",
+    "inherits": "Creality Ender-3 0.4 nozzle",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+    "machine_end_gcode": "PRINT_END",
+    "machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nPRINT_START BED_TEMP={first_layer_bed_temperature[current_extruder]} VITRIFICATION_TEMP={temperature_vitrification[current_extruder]} NOZZLE_TEMP={first_layer_temperature[current_extruder]}",
+    "manual_filament_change": "1",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "name": "Creality Ender-3 Klipper 0.4 nozzle",
+    "nozzle_type": "brass",
+    "print_host": "192.168.10.84:81",
+    "printer_settings_id": "Creality Ender-3 Klipper 0.4 nozzle",
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retraction_length": [
+        "1.3"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "support_multi_bed_types": "1",
+    "thumbnails": "300x300/PNG",
+    "version": "2.3.0.1",
+    "wipe": [
+        "0"
+    ]
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle.info b/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle.info
new file mode 100644
index 0000000..1455299
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1741701894
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle.json b/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle.json
new file mode 100644
index 0000000..64fca43
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/machine/Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle.json	
@@ -0,0 +1,36 @@
+{
+    "bed_custom_texture": "/Users/mbocquet/OrcaSlicer plates/Ender3/Ender3-v2.png",
+    "deretraction_speed": [
+        "0"
+    ],
+    "from": "User",
+    "gcode_flavor": "klipper",
+    "inherits": "Creality Ender-3 0.4 nozzle",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+    "machine_end_gcode": "PRINT_END",
+    "machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nPRINT_START BED_TEMP={first_layer_bed_temperature[current_extruder]} VITRIFICATION_TEMP={temperature_vitrification[current_extruder]} NOZZLE_TEMP={first_layer_temperature[current_extruder]}",
+    "manual_filament_change": "1",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "name": "Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle",
+    "nozzle_type": "brass",
+    "print_host": "192.168.10.84:81",
+    "printer_settings_id": "Creality Ender-3 x Klipper x Sprite Pro 0.4 nozzle",
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retraction_length": [
+        "1.3"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "support_multi_bed_types": "1",
+    "thumbnails": "300x300/PNG",
+    "version": "2.3.0.1",
+    "wipe": [
+        "0"
+    ]
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.info b/OrcaSlicer/user_backup-v2.3.0/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.info
new file mode 100644
index 0000000..1455299
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GM001
+updated_time = 1741701894
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.json b/OrcaSlicer/user_backup-v2.3.0/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.json
new file mode 100644
index 0000000..6cd69c8
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/machine/Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle.json	
@@ -0,0 +1,44 @@
+{
+    "bed_custom_texture": "/Users/mbocquet/OrcaSlicer plates/Ender3/Ender3-v2.png",
+    "deretraction_speed": [
+        "0"
+    ],
+    "from": "User",
+    "gcode_flavor": "klipper",
+    "inherits": "Creality Ender-3 0.4 nozzle",
+    "is_custom_defined": "0",
+    "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+    "machine_end_gcode": "PRINT_END",
+    "machine_max_acceleration_x": [
+        "1700",
+        "500"
+    ],
+    "machine_max_acceleration_y": [
+        "1700",
+        "500"
+    ],
+    "machine_start_gcode": "M117\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nPRINT_START BED_TEMP={first_layer_bed_temperature[current_extruder]} VITRIFICATION_TEMP={temperature_vitrification[current_extruder]} NOZZLE_TEMP={first_layer_temperature[current_extruder]}",
+    "manual_filament_change": "1",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "name": "Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle",
+    "nozzle_type": "brass",
+    "print_host": "192.168.10.84:81",
+    "printer_settings_id": "Ender-3 x Klipper x Sprite Pro @ Speed 0.4 nozzle",
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retraction_length": [
+        "1.3"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "support_multi_bed_types": "1",
+    "thumbnails": "300x300/PNG",
+    "version": "2.3.0.1",
+    "wipe": [
+        "0"
+    ]
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support.info b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support.info
new file mode 100644
index 0000000..b14c032
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support.info	
@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 1741701894
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support.json b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support.json
new file mode 100644
index 0000000..981b4bb
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support.json	
@@ -0,0 +1,17 @@
+{
+    "enable_support": "1",
+    "exclude_object": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}_X4Pro.gcode",
+    "from": "User",
+    "gcode_label_objects": "1",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "inner_wall_speed": "50",
+    "is_custom_defined": "0",
+    "name": "0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support",
+    "outer_wall_speed": "40",
+    "print_settings_id": "0.20mm Standard @ Artillery SWX4 Pro 0.4 nozzle - Support",
+    "skirt_loops": "3",
+    "support_base_pattern_spacing": "3",
+    "support_top_z_distance": "0.25",
+    "version": "2.3.0.1"
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle.info b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle.info
new file mode 100644
index 0000000..b340a0d
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = 
+updated_time = 1741701894
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle.json b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle.json
new file mode 100644
index 0000000..95e8ff1
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "exclude_object": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}_X4Pro.gcode",
+    "from": "User",
+    "gcode_label_objects": "1",
+    "inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
+    "inner_wall_speed": "50",
+    "is_custom_defined": "0",
+    "name": "0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle",
+    "outer_wall_speed": "40",
+    "print_settings_id": "0.20mm Standard @Artillery SWX4 Pro 0.4 nozzle",
+    "skirt_loops": "3",
+    "version": "2.3.0.1"
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Creality Ender3K.info b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Creality Ender3K.info
new file mode 100644
index 0000000..18eb364
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Creality Ender3K.info	
@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 1742923665
diff --git a/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Creality Ender3K.json b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Creality Ender3K.json
new file mode 100644
index 0000000..0ed3fdb
--- /dev/null
+++ b/OrcaSlicer/user_backup-v2.3.0/default/process/0.20mm Standard @Creality Ender3K.json	
@@ -0,0 +1,9 @@
+{
+    "exclude_object": "1",
+    "from": "User",
+    "inherits": "0.20mm Standard @Creality Ender3",
+    "is_custom_defined": "0",
+    "name": "0.20mm Standard @Creality Ender3K",
+    "print_settings_id": "0.20mm Standard @Creality Ender3K",
+    "version": "2.3.0.2"
+}
diff --git a/OrcaSlicer/user_backup-v2.3.0/hints.cereal b/OrcaSlicer/user_backup-v2.3.0/hints.cereal
new file mode 100644
index 0000000000000000000000000000000000000000..32354e902f066d3296273d77500be8ea6e7d086f
GIT binary patch
literal 12
KcmZQ%KmY&$7ytqQ

literal 0
HcmV?d00001