iGoX/3d-printers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ASWX2 - Update printer config files (#7)

Browse Source
This commit was merged in pull request #7.
This commit is contained in:
iGoX
2024-03-03 01:30:33 +01:00
parent 653cc620bd
commit 76587b32e6
2 changed files with 16 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
artillery-sidewinder-x2/klipper-cfg-files/adxl345.cfg
View File

@@ -1,4 +1,4 @@
[mcu no_name_adxl] [mcu x_adxl]
# Change <mySerial> to whatever you found above. For example, # Change <mySerial> to whatever you found above. For example,
# usb-Klipper_rp2040_E661640843545B2E-if00 # usb-Klipper_rp2040_E661640843545B2E-if00
serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1:1.0 serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1:1.0
@@ -6,18 +6,18 @@ serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1:1.
[adxl345] [adxl345]
cs_pin: no_name_adxl:gpio9 cs_pin: x_adxl:gpio9
spi_software_sclk_pin: no_name_adxl:gpio10 spi_software_sclk_pin: x_adxl:gpio10
spi_software_mosi_pin: no_name_adxl:gpio11 spi_software_mosi_pin: x_adxl:gpio11
spi_software_miso_pin: no_name_adxl:gpio12 spi_software_miso_pin: x_adxl:gpio12
axes_map: x,z,y axes_map: y,x,-z # x,z,y
[resonance_tester] [resonance_tester]
accel_chip: adxl345 accel_chip: adxl345
probe_points: probe_points:
# Somewhere slightly above the middle of your print bed # Somewhere slightly above the middle of your print bed
100,100, 20 150,150, 20
#[output_pin power_mode] # Improve power stability #[output_pin power_mode] # Improve power stability
#pin: adxl:gpio23 #pin: adxl:gpio23

14
artillery-sidewinder-x2/klipper-cfg-files/printer.cfg
View File

@@ -206,11 +206,11 @@ switch_pin: PA0 # the z-endstop pin
#*# [bed_mesh default] #*# [bed_mesh default]
#*# version = 1 #*# version = 1
#*# points = #*# points =
#*# 0.217500, 0.105833, 0.057500, -0.016667, -0.000000 #*# 0.217500, 0.105833, 0.057500, -0.016667, -0.000000
#*# 0.176667, 0.081667, 0.023333, -0.018333, 0.012500 #*# 0.176667, 0.081667, 0.023333, -0.018333, 0.012500
#*# 0.175000, 0.095000, 0.064167, 0.009167, 0.014167 #*# 0.175000, 0.095000, 0.064167, 0.009167, 0.014167
#*# 0.220833, 0.136667, 0.061667, -0.008333, -0.028333 #*# 0.220833, 0.136667, 0.061667, -0.008333, -0.028333
#*# 0.145000, 0.015833, -0.005833, -0.061667, -0.072500 #*# 0.145000, 0.015833, -0.005833, -0.061667, -0.072500
#*# x_count = 5 #*# x_count = 5
#*# y_count = 5 #*# y_count = 5
#*# mesh_x_pps = 3 #*# mesh_x_pps = 3
@@ -233,3 +233,7 @@ switch_pin: PA0 # the z-endstop pin
#*# pid_kp = 38.998 #*# pid_kp = 38.998
#*# pid_ki = 0.341 #*# pid_ki = 0.341
#*# pid_kd = 1114.359 #*# pid_kd = 1114.359
#*#
#*# [input_shaper]
#*# shaper_type_x = mzv
#*# shaper_freq_x = 49.0