iGoX/3d-printers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Ender 3 - Mark all changes for Sprite Pro upgrade with TODOs

Browse Source
This commit is contained in:
iGoX
2025-02-11 19:28:01 +01:00
parent cce5f09dd4
commit 81b55dd162
2 changed files with 19 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
creality-ender3/Marlin-2.1.2.4/Marlin/Configuration_adv.h
View File

@@ -1037,7 +1037,9 @@
// Define from 3 to 9 points to probe.
//#define TRAMMING_POINT_XY { { 35, 30 }, { 205, 30 }, { 205, 205 }, { 35, 205 } }
#define TRAMMING_POINT_XY { { 35, 200 }, { 35, 30 }, { 180, 30 }, { 180, 200 } }
//#define TRAMMING_POINT_XY { { 35, 200 }, { 35, 30 }, { 180, 30 }, { 180, 200 } }
// TODO: Change after Sprite Pro upgrade
#define TRAMMING_POINT_XY { { 27, 205 }, { 25, 35 }, { 184, 30 }, { 184, 205 } } // MBO
// Define position names for probe points.
#define TRAMMING_POINT_NAME_1 "Back-Left"
@@ -1048,7 +1050,7 @@
#define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation
#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first // MBO: enable
#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu
#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu // MBO: enable
//#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment
@@ -2657,7 +2659,8 @@
// This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 50 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 40 // (mm) The length of filament for a complete unload. // MBO: change from 400 to 40
// TODO: Change FILAMENT_CHANGE_UNLOAD_LENGTH after Sprite Pro upgrade
#define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // MBO
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading.
@@ -2666,7 +2669,8 @@
// 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 60 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 40 // (mm) Load length of filament, from extruder gear to nozzle. // MBO: change from 400 to 40
// TODO: Change FILAMENT_CHANGE_FAST_LOAD_LENGTH after Sprite Pro upgrade
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 400 // (mm) Load length of filament, from extruder gear to nozzle. // MBO
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.