diff --git a/artillery-sidewinder-x2/README.md b/artillery-sidewinder-x2/README.md
index bee0d8e..65aa4fc 100644
--- a/artillery-sidewinder-x2/README.md
+++ b/artillery-sidewinder-x2/README.md
@@ -1,7 +1,5 @@
 # Artillery SideWinder X2
 
-
-
 ## Klipper Configuration
 
 * Klipper [printer.cfg](conf/printer.cfg) file
diff --git a/creality-ender3/README.md b/creality-ender3/README.md
index e69de29..462cff3 100644
--- a/creality-ender3/README.md
+++ b/creality-ender3/README.md
@@ -0,0 +1,64 @@
+# Creality Ender 3
+
+## Ultimaker Cura configuration
+
+### Cura Profile configuration
+
+| Printer | Extruder |
+|---------|----------|
+| ![Printer](cura-profile/ender3-cura-profile-printer.png) | ![Extruder](cura-profile/ender-cura-profile-extruder.png) |
+
+### Start G-code
+
+```
+; Octoprint's Octolapse plugin required G-code
+; Script based on an original created by tjjfvi (https://github.com/tjjfvi)
+; An up-to-date version of the tjjfvi's original script can be found
+; here:  https://csi.t6.fyi/
+; Note - This script will only work in Cura V4.2 and above!
+; --- Global Settings
+; layer_height = {layer_height}
+; smooth_spiralized_contours = {smooth_spiralized_contours}
+; magic_mesh_surface_mode = {magic_mesh_surface_mode}
+; machine_extruder_count = {machine_extruder_count}
+; --- Single Extruder Settings
+; speed_z_hop = {speed_z_hop}
+; retraction_amount = {retraction_amount}
+; retraction_hop = {retraction_hop}
+; retraction_hop_enabled = {retraction_hop_enabled}
+; retraction_enable = {retraction_enable}
+; retraction_speed = {retraction_speed}
+; retraction_retract_speed = {retraction_retract_speed}
+; retraction_prime_speed = {retraction_prime_speed}
+; speed_travel = {speed_travel}
+
+; Ender 3 Custom Start G-code
+G92 E0 ; Reset Extruder
+G28 ; Home all axes
+G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
+G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
+G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
+G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
+G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
+G92 E0 ; Reset Extruder
+G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
+G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
+```
+
+### End G-code
+
+```
+G91 ;Relative positioning
+G1 E-2 F2700 ;Retract a bit
+G1 E-2 Z0.2 F2400 ;Retract and raise Z
+G1 X5 Y5 F3000 ;Wipe out
+G1 Z10 ;Raise Z more
+G90 ;Absolute positioning
+
+G1 X0 Y{machine_depth} ;Present print
+M106 S0 ;Turn-off fan
+M104 S0 ;Turn-off hotend
+M140 S0 ;Turn-off bed
+
+M84 X Y E ;Disable all steppers but Z
+```
\ No newline at end of file
diff --git a/creality-ender3/cura-profile/ender-cura-profile-extruder.png b/creality-ender3/cura-profile/ender-cura-profile-extruder.png
new file mode 100644
index 0000000..ede0f19
Binary files /dev/null and b/creality-ender3/cura-profile/ender-cura-profile-extruder.png differ
diff --git a/creality-ender3/cura-profile/ender3-cura-profile-printer.png b/creality-ender3/cura-profile/ender3-cura-profile-printer.png
new file mode 100644
index 0000000..1f8cb14
Binary files /dev/null and b/creality-ender3/cura-profile/ender3-cura-profile-printer.png differ