diff --git a/artillery-sidewinder-x2/klipper-cfg-files/adxl345.cfg b/artillery-sidewinder-x2/klipper-cfg-files/adxl345.cfg
index 174bd2c..1a7c741 100644
--- a/artillery-sidewinder-x2/klipper-cfg-files/adxl345.cfg
+++ b/artillery-sidewinder-x2/klipper-cfg-files/adxl345.cfg
@@ -1,4 +1,4 @@
-[mcu no_name_adxl]
+[mcu x_adxl]
 # Change <mySerial> to whatever you found above. For example,
 # usb-Klipper_rp2040_E661640843545B2E-if00
 serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1:1.0
@@ -6,18 +6,18 @@ serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1:1.
 
 
 [adxl345]
-cs_pin: no_name_adxl:gpio9
-spi_software_sclk_pin: no_name_adxl:gpio10
-spi_software_mosi_pin: no_name_adxl:gpio11
-spi_software_miso_pin: no_name_adxl:gpio12
+cs_pin: x_adxl:gpio9
+spi_software_sclk_pin: x_adxl:gpio10
+spi_software_mosi_pin: x_adxl:gpio11
+spi_software_miso_pin: x_adxl:gpio12
 
-axes_map: x,z,y
+axes_map: y,x,-z # x,z,y
 
 [resonance_tester]
 accel_chip: adxl345
 probe_points:
     # Somewhere slightly above the middle of your print bed
-    100,100, 20
+    150,150, 20
 
 #[output_pin power_mode] # Improve power stability
 #pin: adxl:gpio23
\ No newline at end of file
diff --git a/artillery-sidewinder-x2/klipper-cfg-files/printer.cfg b/artillery-sidewinder-x2/klipper-cfg-files/printer.cfg
index 2caf284..a86004a 100644
--- a/artillery-sidewinder-x2/klipper-cfg-files/printer.cfg
+++ b/artillery-sidewinder-x2/klipper-cfg-files/printer.cfg
@@ -10,7 +10,9 @@
 # See more description here: https://blog.freakydu.de/posts/2022-10-01-klipper_with_artillery_sidewinderx2/
 # See docs/Config_Reference.md for a description of parameters.
 
-[include adxl345.cfg]
+# Inpput shaper auto-calibration:
+# accelerometer configuration
+#[include adxl345.cfg]
 
 [include macros.cfg]
 
@@ -85,7 +87,9 @@ sensor_pin: PC0
 #pid_kd = 96.218
 min_temp: 0
 max_temp: 255
-pressure_advance: 0.11375
+#pressure_advance: 0.11375
+pressure_advance: 0.0654 # Calculated on 5/03/24 - Geeetech White PLA - 200°c
+max_extrude_only_distance: 101
 
 [bltouch]
 sensor_pin: PC2
@@ -188,6 +192,9 @@ switch_pin: PA0 # the z-endstop pin
 # Support for M117 gcode (message display)
 [display_status]
 
+# Enable the "M118" and "RESPOND" extended commands.
+[respond]
+
 # Support for gcode arc (G2/G3) commands.
 [gcode_arcs]
 #resolution: 1.0
@@ -206,11 +213,11 @@ switch_pin: PA0 # the z-endstop pin
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  0.217500, 0.105833, 0.057500, -0.016667, -0.000000
-#*# 	  0.176667, 0.081667, 0.023333, -0.018333, 0.012500
-#*# 	  0.175000, 0.095000, 0.064167, 0.009167, 0.014167
-#*# 	  0.220833, 0.136667, 0.061667, -0.008333, -0.028333
-#*# 	  0.145000, 0.015833, -0.005833, -0.061667, -0.072500
+#*# 	0.217500, 0.105833, 0.057500, -0.016667, -0.000000
+#*# 	0.176667, 0.081667, 0.023333, -0.018333, 0.012500
+#*# 	0.175000, 0.095000, 0.064167, 0.009167, 0.014167
+#*# 	0.220833, 0.136667, 0.061667, -0.008333, -0.028333
+#*# 	0.145000, 0.015833, -0.005833, -0.061667, -0.072500
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 3
@@ -233,3 +240,7 @@ switch_pin: PA0 # the z-endstop pin
 #*# pid_kp = 38.998
 #*# pid_ki = 0.341
 #*# pid_kd = 1114.359
+#*#
+#*# [input_shaper]
+#*# shaper_type_x = mzv
+#*# shaper_freq_x = 49.4