iGoX/3d-printers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Prepare firmware modifications for Spite Pro extruder upgrade #19

Merged
iGoX merged 9 commits from igox/ender3-sprite-pro-extruder into main 2025-02-11 19:42:37 +01:00
Conversation 0 Commits 9 Files Changed 2 +19 -9
2 changed files with 19 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Showing only changes of commit 81b55dd162 - Show all commits

16
creality-ender3/Marlin-2.1.2.4/Marlin/Configuration.h
View File

@@ -634,7 +634,8 @@
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
// (Use MINTEMP for thermistor short/failure protection.) // (Use MINTEMP for thermistor short/failure protection.)
#define HEATER_0_MAXTEMP 300 // MBO: Original 275 / Sprite Pro 300 // TODO: Change HEATER_0_MAXTEMP to 300 after Sprite Pro extruder upgrade
#define HEATER_0_MAXTEMP 275 // MBO
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
@@ -855,7 +856,8 @@
* Note: For Bowden Extruders make this large enough to allow load/unload. * Note: For Bowden Extruders make this large enough to allow load/unload.
*/ */
#define PREVENT_LENGTHY_EXTRUDE #define PREVENT_LENGTHY_EXTRUDE
#define EXTRUDE_MAXLENGTH 600 // MBO: To be decrease with Sprite Pro? // TODO: To be decrease with Sprite Pro?
#define EXTRUDE_MAXLENGTH 600 // MBO
//=========================================================================== //===========================================================================
//======================== Thermal Runaway Protection ======================= //======================== Thermal Runaway Protection =======================
@@ -1197,7 +1199,8 @@
* Override with M92 * Override with M92
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } // MBO: change e-step (93) to fit Sprite Pro => https://www.youtube.com/watch?v=lH-RrjtiC8M // TODO: change e-step (93) to fit Sprite Pro extruder => https://www.youtube.com/watch?v=lH-RrjtiC8M
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 }
/** /**
* Default Max Feed Rate (linear=mm/s, rotational=°/s) * Default Max Feed Rate (linear=mm/s, rotational=°/s)
@@ -1515,8 +1518,10 @@
// PROBE_OFFSET with original extruder fans // PROBE_OFFSET with original extruder fans
//#define NOZZLE_TO_PROBE_OFFSET { -44, -14, -2.725 } //#define NOZZLE_TO_PROBE_OFFSET { -44, -14, -2.725 }
// PROBE_OFFSET with SATSANA fangs extruder fans // PROBE_OFFSET with SATSANA fangs extruder fans
#define NOZZLE_TO_PROBE_OFFSET { -51, -12, 0 } // MBO: To be cahnge after Sprite Pro upgrade // TODO: To be change after Sprite Pro upgrade
#define NOZZLE_TO_PROBE_OFFSET { -51, -12, 0 } // MBO
// Most probes should stay away from the edges of the bed, but // Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@@ -1872,7 +1877,8 @@
// After a runout is detected, continue printing this length of filament // After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of // before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
#define FILAMENT_RUNOUT_DISTANCE_MM 8 // MBO: to be changed after Sprite Pro and new filament sensor installation // TODO: to be changed after Sprite Pro and new filament sensor installation
#define FILAMENT_RUNOUT_DISTANCE_MM 8 // MBO
#ifdef FILAMENT_RUNOUT_DISTANCE_MM #ifdef FILAMENT_RUNOUT_DISTANCE_MM
// Enable this option to use an encoder disc that toggles the runout pin // Enable this option to use an encoder disc that toggles the runout pin

12
creality-ender3/Marlin-2.1.2.4/Marlin/Configuration_adv.h
View File

@@ -1037,7 +1037,9 @@
// Define from 3 to 9 points to probe. // Define from 3 to 9 points to probe.
//#define TRAMMING_POINT_XY { { 35, 30 }, { 205, 30 }, { 205, 205 }, { 35, 205 } } //#define TRAMMING_POINT_XY { { 35, 30 }, { 205, 30 }, { 205, 205 }, { 35, 205 } }
#define TRAMMING_POINT_XY { { 35, 200 }, { 35, 30 }, { 180, 30 }, { 180, 200 } } //#define TRAMMING_POINT_XY { { 35, 200 }, { 35, 30 }, { 180, 30 }, { 180, 200 } }
// TODO: Change after Sprite Pro upgrade
#define TRAMMING_POINT_XY { { 27, 205 }, { 25, 35 }, { 184, 30 }, { 184, 205 } } // MBO
// Define position names for probe points. // Define position names for probe points.
#define TRAMMING_POINT_NAME_1 "Back-Left" #define TRAMMING_POINT_NAME_1 "Back-Left"
@@ -1048,7 +1050,7 @@
#define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation
#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first // MBO: enable #define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first // MBO: enable
#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu // MBO: enable
//#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment
@@ -2657,7 +2659,8 @@
// This short retract is done immediately, before parking the nozzle. // This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 50 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 50 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 40 // (mm) The length of filament for a complete unload. // MBO: change from 400 to 40 // TODO: Change FILAMENT_CHANGE_UNLOAD_LENGTH after Sprite Pro upgrade
#define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // MBO
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading. // Set to 0 for manual unloading.
@@ -2666,7 +2669,8 @@
// 0 to disable start loading and skip to fast load only // 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 60 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 60 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 40 // (mm) Load length of filament, from extruder gear to nozzle. // MBO: change from 400 to 40 // TODO: Change FILAMENT_CHANGE_FAST_LOAD_LENGTH after Sprite Pro upgrade
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 400 // (mm) Load length of filament, from extruder gear to nozzle. // MBO
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.