[mcu no_name_adxl]
# Change <mySerial> to whatever you found above. For example,
# usb-Klipper_rp2040_E661640843545B2E-if00
serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1:1.0



[adxl345]
cs_pin: no_name_adxl:gpio9
spi_software_sclk_pin: no_name_adxl:gpio10
spi_software_mosi_pin: no_name_adxl:gpio11
spi_software_miso_pin: no_name_adxl:gpio12

axes_map: x,z,y

[resonance_tester]
accel_chip: adxl345
probe_points:
    # Somewhere slightly above the middle of your print bed
    100,100, 20

#[output_pin power_mode] # Improve power stability
#pin: adxl:gpio23