Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89

lib/Slic3r/ExtrusionPath.pm

@@ -7,6 +7,9 @@ extends 'Slic3r::Polyline';
 # expressed in layers
 has 'depth_layers' => (is => 'ro', default => sub {1});
 
+# multiplier for the flow rate
+has 'flow_ratio' => (is => 'rw');
+
 # perimeter/fill/solid-fill/bridge/skirt
 has 'role'         => (is => 'ro', required => 1);