Merge branch 'master' into patch-1

CMakeLists.txt

@@ -229,7 +229,7 @@ if(WIN32)
     add_definitions(-D_USE_MATH_DEFINES -D_WIN32 -D_CRT_SECURE_NO_WARNINGS -D_SCL_SECURE_NO_WARNINGS)
     if(MSVC)
         # BOOST_ALL_NO_LIB: Avoid the automatic linking of Boost libraries on Windows. Rather rely on explicit linking.
-        add_definitions(-DBOOST_ALL_NO_LIB -DBOOST_USE_WINAPI_VERSION=0x601 )
+        add_definitions(-DBOOST_ALL_NO_LIB -DBOOST_USE_WINAPI_VERSION=0x601 -DBOOST_SYSTEM_USE_UTF8 )
     endif(MSVC)
 endif(WIN32)
 

cmake/modules/FindGTK3.cmake

@@ -0,0 +1,46 @@
+# - Try to find GTK+ 3
+# Once done, this will define
+#
+# GTK3_FOUND - system has GTK+ 3.
+# GTK3_INCLUDE_DIRS - the GTK+ 3. include directories
+# GTK3_LIBRARIES - link these to use GTK+ 3.
+#
+# Copyright (C) 2012 Raphael Kubo da Costa <rakuco@webkit.org>
+# Copyright (C) 2013 Igalia S.L.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND ITS CONTRIBUTORS ``AS
+# IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR ITS
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+find_package(PkgConfig)
+pkg_check_modules(GTK3 QUIET gtk+-3.0)
+set(VERSION_OK TRUE)
+if (GTK3_VERSION)
+if (GTK3_FIND_VERSION_EXACT)
+if (NOT("${GTK3_FIND_VERSION}" VERSION_EQUAL "${GTK3_VERSION}"))
+set(VERSION_OK FALSE)
+endif ()
+else ()
+if ("${GTK3_VERSION}" VERSION_LESS "${GTK3_FIND_VERSION}")
+set(VERSION_OK FALSE)
+endif ()
+endif ()
+endif ()
+include(FindPackageHandleStandardArgs)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK3 DEFAULT_MSG GTK3_INCLUDE_DIRS GTK3_LIBRARIES VERSION_OK)

deps/CGAL/cgal/CGALConfigVersion.cmake

@@ -23,15 +23,3 @@ endif()
 if("FALSE")
   return()
 endif()
-
-# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
-if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "8" STREQUAL "")
-  return()
-endif()
-
-# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
-if(NOT CMAKE_SIZEOF_VOID_P STREQUAL "8")
-  math(EXPR installedBits "8 * 8")
-  set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
-  set(PACKAGE_VERSION_UNSUITABLE TRUE)
-endif()

deps/GMP/GMP.cmake

@@ -19,15 +19,18 @@ if (MSVC)
 else ()
     set(_gmp_ccflags "-O2 -DNDEBUG -fPIC -DPIC -Wall -Wmissing-prototypes -Wpointer-arith -pedantic -fomit-frame-pointer -fno-common")
     set(_gmp_build_tgt "${CMAKE_SYSTEM_PROCESSOR}")
-    if (${CMAKE_SYSTEM_PROCESSOR} MATCHES "arm")
-        set(_gmp_ccflags "${_gmp_ccflags} -march=armv7-a") # Works on RPi-4
-        set(_gmp_build_tgt armv7)
-    endif()
 
     if (APPLE)
+        if (${CMAKE_SYSTEM_PROCESSOR} MATCHES "arm")
+            set(_gmp_build_tgt aarch64)
+        endif()
         set(_gmp_ccflags "${_gmp_ccflags} -mmacosx-version-min=${DEP_OSX_TARGET}")
         set(_gmp_build_tgt "--build=${_gmp_build_tgt}-apple-darwin")
     elseif(CMAKE_SYSTEM_NAME STREQUAL "Linux")
+        if (${CMAKE_SYSTEM_PROCESSOR} MATCHES "arm")
+            set(_gmp_ccflags "${_gmp_ccflags} -march=armv7-a") # Works on RPi-4
+            set(_gmp_build_tgt armv7)
+        endif()
         set(_gmp_build_tgt "--build=${_gmp_build_tgt}-pc-linux-gnu")
     else ()
         set(_gmp_build_tgt "") # let it guess
@@ -35,7 +38,7 @@ else ()
 
     ExternalProject_Add(dep_GMP
         # URL  https://gmplib.org/download/gmp/gmp-6.1.2.tar.bz2
-        URL https://gmplib.org/download/gmp/gmp-6.2.0.tar.lz
+        URL https://gmplib.org/download/gmp/gmp-6.2.1.tar.bz2
         BUILD_IN_SOURCE ON 
         CONFIGURE_COMMAND  env "CFLAGS=${_gmp_ccflags}" "CXXFLAGS=${_gmp_ccflags}" ./configure --enable-shared=no --enable-cxx=yes --enable-static=yes "--prefix=${DESTDIR}/usr/local" ${_gmp_build_tgt}
         BUILD_COMMAND     make -j

deps/PNG/PNG.cmake

@@ -1,3 +1,9 @@
+if (APPLE)
+    # Only disable NEON extension for Apple ARM builds, leave it enabled for Raspberry PI.
+    set(_disable_neon_extension "-DPNG_ARM_NEON=off")
+else ()
+    set(_disable_neon_extension "")
+endif ()
 
 prusaslicer_add_cmake_project(PNG 
     GIT_REPOSITORY https://github.com/glennrp/libpng.git 
@@ -8,6 +14,8 @@ prusaslicer_add_cmake_project(PNG
         -DPNG_STATIC=ON
         -DPNG_PREFIX=prusaslicer_
         -DPNG_TESTS=OFF
+        -DDISABLE_DEPENDENCY_TRACKING=OFF
+        ${_disable_neon_extension}
 )
 
 if (MSVC)

deps/deps-linux.cmake

@@ -80,7 +80,6 @@ ExternalProject_Add(dep_libcurl
         --disable-smb
         --disable-smtp
         --disable-gopher
-        --disable-crypto-auth
         --without-gssapi
         --without-libpsl
         --without-libidn2

deps/deps-macos.cmake

@@ -67,7 +67,6 @@ ExternalProject_Add(dep_libcurl
         --disable-smb
         --disable-smtp
         --disable-gopher
-        --disable-crypto-auth
         --without-gssapi
         --without-libpsl
         --without-libidn2

deps/wxWidgets/wxWidgets.cmake

@@ -1,4 +1,11 @@
-set(_wx_git_tag v3.1.3-patched)
+if (APPLE AND ${CMAKE_SYSTEM_PROCESSOR} MATCHES "arm")
+    # The new OSX 11 (Big Sur) is not compatible with wxWidgets 3.1.3.
+    # Let's use patched wxWidgets 3.1.4, even though it is not quite tested.
+    set(_wx_git_tag v3.1.4-patched)
+else ()
+    # Use the tested patched wxWidgets 3.1.3 everywhere else.
+    set(_wx_git_tag v3.1.3-patched)
+endif ()
 
 # set(_patch_command "")
 set(_wx_toolkit "")

doc/How to build - Windows.md

@@ -159,6 +159,3 @@ Refer to the CMake scripts inside the `deps` directory to see which dependencies
 
 \*) Specifically, the problem arises when building boost. Boost build tool appends all build options into paths of
 intermediate files, which are not handled correctly by either `b2.exe` or possibly `ninja` (?).
-
-
-

resources/icons/notification_eject_sd.svg

@@ -0,0 +1,75 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   version="1.1"
+   id="Layer_1"
+   x="0px"
+   y="0px"
+   viewBox="0 0 800 800"
+   style="enable-background:new 0 0 800 800;"
+   xml:space="preserve"
+   sodipodi:docname="notification_eject_sd_hover.svg"
+   inkscape:version="1.0 (4035a4fb49, 2020-05-01)"><metadata
+   id="metadata15"><rdf:RDF><cc:Work
+       rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+         rdf:resource="http://purl.org/dc/dcmitype/StillImage" /></cc:Work></rdf:RDF></metadata><defs
+   id="defs13" /><sodipodi:namedview
+   inkscape:document-rotation="0"
+   pagecolor="#ffffff"
+   bordercolor="#666666"
+   borderopacity="1"
+   objecttolerance="10"
+   gridtolerance="10"
+   guidetolerance="10"
+   inkscape:pageopacity="0"
+   inkscape:pageshadow="2"
+   inkscape:window-width="3840"
+   inkscape:window-height="2066"
+   id="namedview11"
+   showgrid="false"
+   inkscape:zoom="1.26"
+   inkscape:cx="400"
+   inkscape:cy="396.42857"
+   inkscape:window-x="-11"
+   inkscape:window-y="-11"
+   inkscape:window-maximized="1"
+   inkscape:current-layer="Layer_1" />
+<style
+   type="text/css"
+   id="style2">
+	.st0{fill:#ED6B21;}
+</style>
+<path
+   style="stroke-width:0.85"
+   class="st0"
+   d="m 565.50264,534.98775 v 60.775 h -330.565 v -60.775 h 330.565 m 27.88,-48.195 h -386.24 c -11.22,0 -20.315,9.095 -20.315,20.315 v 116.535 c 0,11.22 9.095,20.315 20.315,20.315 h 386.24 c 11.22,0 20.315,-9.095 20.315,-20.315 v -116.45 c 0,-11.22 -9.095,-20.4 -20.315,-20.4 z"
+   id="path4" />
+<path
+   style="stroke-width:0.85"
+   class="st0"
+   d="m 400.09264,235.70275 116.96,155.295 h -233.75 l 116.79,-155.295 m 0,-66.64 c -6.12,0 -12.155,2.72 -16.235,8.16 l -172.635,229.5 c -10.115,13.43 -0.51,32.555 16.235,32.555 h 345.355 c 16.745,0 26.35,-19.125 16.235,-32.555 l -172.805,-229.5 c -3.995,-5.44 -10.03,-8.16 -16.15,-8.16 z"
+   id="path6" />
+<g
+   id="g4"
+   transform="matrix(0.9775,0,0,0.9775,53.547,53.54775)">
+	<path
+   id="path2"
+   class="st0"
+   d="M 597.2,701.3 H 110.6 C 53.2,701.3 6.5,654.6 6.5,597.2 V 110.6 C 6.5,53.2 53.2,6.5 110.6,6.5 h 486.6 c 57.4,0 104.1,46.7 104.1,104.1 v 486.6 c 0,57.4 -46.7,104.1 -104.1,104.1 z M 110.6,52.4 c -32,0 -58.2,26 -58.2,58.2 v 486.6 c 0,32 26,58.2 58.2,58.2 h 486.6 c 32,0 58.2,-26 58.2,-58.2 V 110.6 c 0,-32 -26,-58.2 -58.2,-58.2 z" />
+</g>
+<path
+   style="fill:#ed6b21;fill-opacity:1;stroke-width:0.674603"
+   d="m 150.65676,738.12999 c -12.4717,-1.39663 -26.66772,-5.94192 -37.84321,-12.11671 -17.754551,-9.80992 -33.768844,-26.68981 -42.418124,-44.71089 -5.985061,-12.4701 -8.760227,-23.35456 -9.821918,-38.52249 -0.48061,-6.8663 -0.640464,-87.42616 -0.497289,-250.61508 0.195544,-222.88027 0.294923,-240.94223 1.356742,-246.58759 4.2349,-22.51562 13.68014,-40.62012 29.200931,-55.97194 14.237938,-14.082924 31.958648,-23.427941 52.602238,-27.739791 5.87892,-1.227937 14.00696,-1.268146 256.3492,-1.268146 h 250.27778 l 7.08334,1.561512 c 21.30688,4.697075 36.90336,13.216072 51.96052,28.381502 14.67865,14.784203 23.1932,30.350373 27.76125,50.752683 l 1.56791,7.00271 v 250.95239 c 0,242.72256 -0.0418,251.15149 -1.26428,257.0238 -9.30592,44.69034 -45.18963,77.43352 -89.75566,81.90028 -9.17898,0.92002 -488.33076,0.87927 -496.55943,-0.0425 z M 652.87275,692.49 c 19.93824,-6.17834 34.6922,-21.42493 40.00111,-41.33675 l 1.51306,-5.67494 V 399.58544 153.69259 l -1.52571,-5.73412 c -5.66288,-21.28292 -21.4158,-36.89778 -42.2051,-41.83523 -5.63965,-1.33941 -7.66026,-1.3488 -253.17948,-1.17613 l -247.49447,0.17405 -4.72222,1.5953 c -18.05932,6.10093 -31.7315,19.23923 -37.4918,36.0278 -1.04762,3.05333 -2.22128,7.52472 -2.60813,9.93642 -0.47859,2.9836 -0.705,81.91876 -0.70847,246.99889 -0.005,218.14117 0.10226,243.1829 1.05916,248.25397 4.27172,22.63802 22.24346,40.86392 44.80877,45.4425 3.58848,0.72811 49.16893,0.87009 250.95237,0.78171 l 246.56747,-0.10801 z"
+   id="path17" /><path
+   style="fill:#ed6b21;fill-opacity:1;stroke-width:0.674603"
+   d="m 218.59688,436.65333 c -4.13129,-2.06443 -6.86895,-4.83026 -9.31331,-9.40915 -1.8345,-3.43648 -1.79343,-12.82008 0.0723,-16.52778 1.6224,-3.22405 174.17376,-232.72362 177.28101,-235.79015 3.40221,-3.35765 7.0012,-4.88322 12.34326,-5.23218 4.15899,-0.27168 5.32913,-0.0718 8.86231,1.51379 2.23886,1.00474 4.97342,2.78734 6.07682,3.96132 4.02813,4.28582 175.25817,232.2757 176.9048,235.54571 2.34584,4.65861 2.38759,12.10251 0.0927,16.52929 -2.00877,3.87485 -5.74351,7.80536 -9.18863,9.67026 l -2.69841,1.4607 -178.1462,0.17362 -178.14619,0.17362 z m 298.67589,-45.66907 c -0.0611,-1.0035 -116.48775,-154.99008 -117.18534,-154.99008 -0.71184,0 -116.84805,154.02591 -116.8632,154.99008 -0.004,0.27827 52.6617,0.50595 117.03571,0.50595 64.374,0 117.02978,-0.22768 117.01283,-0.50595 z"
+   id="path19" /><path
+   style="fill:#ed6b21;fill-opacity:1;stroke-width:0.674603"
+   d="m 202.23056,642.87591 c -4.08272,-1.10499 -7.53117,-3.30912 -10.37477,-6.63124 -4.63948,-5.42019 -4.43387,-2.10678 -4.42657,-71.33297 l 0.007,-62.44927 1.60268,-3.44194 c 1.88877,-4.05635 5.3977,-7.75734 9.36436,-9.8769 l 2.84915,-1.52243 h 199.00794 199.00793 l 2.84915,1.52243 c 3.96665,2.11956 7.47559,5.82055 9.36436,9.8769 l 1.60267,3.44194 0.007,62.44927 c 0.008,69.78764 0.26152,65.98231 -4.79028,71.72146 -1.4904,1.69319 -4.37627,3.87229 -6.52672,4.9283 l -3.85513,1.89304 -196.30953,0.12602 c -153.67069,0.0987 -196.97613,-0.0544 -199.37859,-0.70461 z M 565.87502,565.20052 V 534.50608 H 400.25994 234.64486 v 30.69444 30.69446 h 165.61508 165.61508 z"
+   id="path21" /></svg>

resources/icons/notification_eject_sd_hover.svg

@@ -0,0 +1,76 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   version="1.1"
+   id="Layer_1"
+   x="0px"
+   y="0px"
+   viewBox="0 0 800 800"
+   style="enable-background:new 0 0 800 800;"
+   xml:space="preserve"
+   sodipodi:docname="notification_eject_sd.svg"
+   inkscape:version="1.0 (4035a4fb49, 2020-05-01)"><metadata
+   id="metadata15"><rdf:RDF><cc:Work
+       rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+         rdf:resource="http://purl.org/dc/dcmitype/StillImage" /></cc:Work></rdf:RDF></metadata><defs
+   id="defs13" /><sodipodi:namedview
+   inkscape:document-rotation="0"
+   pagecolor="#ffffff"
+   bordercolor="#666666"
+   borderopacity="1"
+   objecttolerance="10"
+   gridtolerance="10"
+   guidetolerance="10"
+   inkscape:pageopacity="0"
+   inkscape:pageshadow="2"
+   inkscape:window-width="1918"
+   inkscape:window-height="2054"
+   id="namedview11"
+   showgrid="false"
+   inkscape:zoom="1.26"
+   inkscape:cx="400"
+   inkscape:cy="401.5873"
+   inkscape:window-x="0"
+   inkscape:window-y="0"
+   inkscape:window-maximized="0"
+   inkscape:current-layer="Layer_1" />
+<style
+   type="text/css"
+   id="style2">
+	.st0{fill:#ED6B21;}
+</style>
+<path
+   class="st0"
+   d="M594.8,558.9v71.5H205.9v-71.5H594.8 M627.6,502.2H173.2c-13.2,0-23.9,10.7-23.9,23.9v137.1  c0,13.2,10.7,23.9,23.9,23.9h454.4c13.2,0,23.9-10.7,23.9-23.9V526.2C651.5,513,640.8,502.2,627.6,502.2L627.6,502.2z"
+   id="path4" />
+<path
+   class="st0"
+   d="M400.2,206.8l137.6,182.7h-275L400.2,206.8 M400.2,128.4c-7.2,0-14.3,3.2-19.1,9.6l-203.1,270  c-11.9,15.8-0.6,38.3,19.1,38.3h406.3c19.7,0,31-22.5,19.1-38.3l-203.3-270C414.5,131.6,407.4,128.4,400.2,128.4L400.2,128.4z"
+   id="path6" />
+<g
+   id="g4"
+   transform="matrix(1.15,0,0,1.15,-7.50075,-7.5)">
+	<path
+   id="path2"
+   class="st0"
+   d="M597.2,701.3H110.6c-57.4,0-104.1-46.7-104.1-104.1V110.6C6.5,53.2,53.2,6.5,110.6,6.5h486.6   c57.4,0,104.1,46.7,104.1,104.1v486.6C701.3,654.6,654.6,701.3,597.2,701.3z M110.6,52.4c-32,0-58.2,26-58.2,58.2v486.6   c0,32,26,58.2,58.2,58.2h486.6c32,0,58.2-26,58.2-58.2V110.6c0-32-26-58.2-58.2-58.2L110.6,52.4z" />
+</g>
+<path
+   style="fill:#ed6b21;fill-opacity:1;stroke-width:0.793651"
+   d="M 107.81901,798.00119 C 77.966509,794.83135 49.146122,779.90354 30.060545,757.72544 16.219297,741.64143 7.2605087,723.64471 2.5844311,702.53048 L 0.79365079,694.44444 V 399.60317 104.7619 L 2.5707889,96.74281 C 8.1200484,71.702533 18.222321,53.056007 35.651802,35.682695 53.220959,18.170156 71.802034,8.0954675 96.708127,2.5778576 L 104.7619,0.79365079 h 294.44445 c 281.74132,0 294.75136,0.0623952 301.55851,1.44626191 16.67428,3.3898194 30.80854,9.2277743 44.45639,18.3620833 30.56319,20.455498 49.17772,51.734599 52.83931,88.789134 0.52246,5.28681 0.71992,107.13501 0.57277,295.37077 -0.21452,274.44189 -0.28952,287.63907 -1.67476,294.84127 -9.63677,50.10325 -47.25156,87.71807 -97.3554,97.35548 -7.21079,1.38698 -20.15876,1.45445 -296.82539,1.54754 -159.10715,0.0532 -291.83859,-0.17373 -294.95877,-0.505 z m 582.70983,-52.40653 c 14.11333,-2.49918 25.86756,-8.65506 36.13916,-18.92666 10.4238,-10.4238 16.61917,-22.37735 18.96341,-36.58863 0.59763,-3.62296 0.78014,-91.16224 0.61306,-294.04762 -0.2267,-275.2812 -0.30507,-289.11319 -1.66353,-293.6508 -2.29132,-7.653498 -8.052,-18.790275 -12.80623,-24.757484 -7.93878,-9.964272 -18.57499,-17.346949 -31.48512,-21.854079 l -7.43245,-2.594784 -291.12328,-0.20372 C 142.50327,52.78948 110.02937,52.90047 105.30529,53.98405 79.968659,59.795581 61.031339,78.238321 54.164726,103.78898 l -1.754497,6.52848 -0.240323,282.14286 c -0.151001,177.27655 0.04527,285.53516 0.528069,291.26984 2.318854,27.5434 19.073236,49.76542 44.524247,59.05433 10.087718,3.68173 -4.026285,3.51395 301.243128,3.58099 197.57151,0.0434 288.82563,-0.19746 292.06349,-0.77082 z"
+   id="path19" /><path
+   id="path12"
+   d="M 107.81901,798.00119 C 71.793616,794.17587 39.726024,774.51428 19.725029,743.98814 11.604149,731.59381 6.0410683,718.13847 2.5844311,702.53048 L 0.79365079,694.44444 V 399.20635 103.96825 L 3.035741,94.554887 C 8.7824143,70.427608 18.557382,52.794942 35.676163,35.676161 52.78713,18.565194 70.514246,8.724096 94.444444,3.0513179 l 9.523806,-2.25766869 h 294.84127 c 282.12524,0 295.14809,0.0623746 301.95534,1.44626189 16.66109,3.3871391 30.79289,9.2216269 44.45639,18.3543829 30.53954,20.412782 49.17677,51.732756 52.83931,88.796836 0.52246,5.28681 0.71992,107.13501 0.57277,295.37077 -0.21452,274.44188 -0.28952,287.63907 -1.67476,294.84127 -8.48938,44.13777 -38.62564,78.86883 -80.59962,92.88841 -19.37815,6.47239 11.16453,5.88739 -313.58117,6.0062 -159.10715,0.0579 -291.83859,-0.16532 -294.95877,-0.49659 z m 583.84766,-52.6969 c 13.48971,-2.42242 24.94716,-8.60413 35.32488,-19.05909 10.25229,-10.3286 16.66154,-22.92711 18.61985,-36.60068 0.66689,-4.65647 0.83196,-81.74243 0.62956,-294.0096 C 745.9846,126.77174 745.87745,107.60752 744.6044,102.9114 738.42079,80.100871 721.07257,62.283764 697.9879,55.03493 l -5.92441,-1.860328 H 399.20635 106.34921 L 98.809524,55.78721 C 75.623265,63.821579 59.178748,82.101475 53.902861,105.70593 52.59901,111.53938 52.514615,128.88593 52.47105,400 l -0.04629,288.09524 2.080286,7.60155 c 6.270993,22.91476 22.15377,39.95711 44.384633,47.62505 3.584011,1.23621 7.998091,1.91356 14.999211,2.30168 5.45635,0.30249 136.34921,0.59491 290.87301,0.64982 232.38849,0.0826 281.98128,-0.0849 286.90477,-0.96905 z"
+   style="fill:#ed6b21;fill-opacity:1;stroke-width:0.793651" /><path
+   id="path14"
+   d="m 188.74939,444.33528 c -4.767,-1.68913 -10.12828,-6.7592 -12.71276,-12.02223 -2.90908,-5.92405 -3.07868,-13.78271 -0.41474,-19.21781 1.59087,-3.24578 204.04455,-273.05533 208.24079,-277.52202 0.98764,-1.05129 4.03672,-3.01468 6.77574,-4.3631 4.52929,-2.22976 5.50158,-2.41761 10.74224,-2.07541 6.86047,0.44798 10.76603,2.25377 15.37601,7.10932 3.73681,3.93587 203.30677,268.8636 207.0044,274.79691 2.05716,3.30097 2.4722,4.84315 2.70946,10.06767 0.23771,5.23447 -0.0137,6.8089 -1.6588,10.38763 -2.76417,6.01319 -5.53229,8.93875 -11.0814,11.71167 l -4.85687,2.42701 -208.40498,-0.0627 c -181.84257,-0.0547 -208.82739,-0.21233 -211.71909,-1.23698 z m 348.94902,-54.98925 c 0,-0.9027 -136.36908,-182.10669 -137.30528,-182.44799 -0.54415,-0.19837 -135.36926,178.28524 -137.53574,182.07198 -0.54249,0.9482 19.37332,1.10934 137.10317,1.10934 83.74346,0 137.73785,-0.28747 137.73785,-0.73333 z"
+   style="fill:#ed6b21;fill-opacity:1;stroke-width:0.793651" /><path
+   id="path16"
+   d="m 168.25397,686.16973 c -7.05465,-1.71645 -13.06577,-6.58064 -16.33102,-13.21504 L 150,669.04762 v -74.20635 -74.20635 l 1.8935,-4.19003 c 1.12593,-2.49152 3.46026,-5.59868 5.75857,-7.66505 7.33695,-6.59655 -16.73947,-6.00214 243.08455,-6.00144 l 231.80306,6.3e-4 4.76912,2.2562 c 5.31341,2.5137 9.30333,6.56248 11.81369,11.98794 1.66145,3.59075 1.67116,4.0432 1.67116,77.8181 v 74.20635 l -1.92294,3.90707 c -2.44721,4.97227 -6.5951,9.12016 -11.60261,11.6026 l -3.93477,1.95064 -231.3492,0.12055 c -127.24207,0.0663 -232.42064,-0.14013 -233.73016,-0.45875 z m 426.5873,-91.72529 V 558.33333 H 400 205.15873 v 36.11111 36.11111 H 400 594.84127 Z"
+   style="fill:#ed6b21;fill-opacity:1;stroke-width:0.793651" /></svg>

resources/localization/list.txt

@@ -78,7 +78,6 @@ src/libslic3r/ExtrusionEntity.cpp
 src/libslic3r/Flow.cpp
 src/libslic3r/Format/3mf.cpp
 src/libslic3r/Format/AMF.cpp
-src/libslic3r/GCode/PreviewData.cpp
 src/libslic3r/miniz_extension.cpp
 src/libslic3r/Preset.cpp
 src/libslic3r/Print.cpp

resources/profiles/Anycubic.idx

@@ -1,4 +1,9 @@
+min_slic3r_version = 2.3.0-beta2
+0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel.
+0.0.5 Updated end g-code.
 min_slic3r_version = 2.3.0-alpha2
+0.0.4 Fixed predator output filaname format, infill overlap.
+0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator
 0.0.2 Added Anycubic Predator
 min_slic3r_version = 2.3.0-alpha0
 0.0.1 Initial Version

resources/profiles/Anycubic.ini

@@ -5,7 +5,7 @@
 name = Anycubic
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.2
+config_version = 0.0.6
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anycubic/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -112,7 +112,7 @@ notes =
 overhangs = 0
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{print_preset}_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
 perimeters = 2
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
@@ -376,7 +376,7 @@ filament_vendor = Generic
 [printer:*common_akossel*]
 printer_technology = FFF
 bed_shape = 
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]
 between_objects_gcode = 
 deretract_speed = 40
 extruder_colour = #FFFF00
@@ -420,7 +420,7 @@ retract_restart_extra_toolchange = 0
 retract_speed = 60
 single_extruder_multi_material = 0
 start_gcode = 
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y100 F3000 ; present print\nM84 ; disable motors
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG28 ; home\nM84 ; disable motors
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
@@ -1051,7 +1051,7 @@ before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]
 default_filament_profile = Generic PLA @MEGA
 default_print_profile = 0.15mm QUALITY @MEGA
 deretract_speed = 50
-end_gcode = G4 ; wait\nG92 E0\nG1{if layer_z < max_print_height} Z{z_offset+min(layer_z+30, max_print_height)}{endif} E-35 F1000 ; move print head up & retract filament\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
+end_gcode = G4 ; wait\nG92 E0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-35 F1000 ; move print head up & retract filament\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
 extruder_colour = #808080
 gcode_flavor = marlin
 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
@@ -1149,11 +1149,11 @@ dont_support_bridges = 1
 support_material_synchronize_layers = 0
 travel_speed = 94
 first_layer_speed = 15
-perimeter_acceleration = 300
-infill_acceleration = 200
-bridge_acceleration = 300
-first_layer_acceleration = 300
-default_acceleration = 300
+perimeter_acceleration = 0
+infill_acceleration = 0
+bridge_acceleration = 0
+first_layer_acceleration = 0
+default_acceleration = 0
 max_volumetric_speed = 15
 perimeter_extruder = 1
 infill_extruder = 1
@@ -1169,7 +1169,6 @@ wipe_tower_width = 60
 wipe_tower_rotation_angle = 0
 wipe_tower_bridging = 10
 interface_shells = 0
-infill_overlap = 20%
 bridge_flow_ratio = 0.8
 resolution = 0
 xy_size_compensation = 0
@@ -1179,7 +1178,7 @@ complete_objects = 0
 extruder_clearance_radius = 45
 extruder_clearance_height = 25
 gcode_comments = 0
-output_filename_format = {input_filename_base}_{print_preset}_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}.gcode
 post_process =
 notes =
 max_volumetric_extrusion_rate_slope_negative = 0
@@ -1190,18 +1189,21 @@ print_settings_id =
 [print:*common predator 0.4 nozzle*]
 inherits = *common predator*
 first_layer_height = 0.16
+infill_overlap = 25%
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_PREDATOR.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/ and nozzle_diameter[0]==0.4
 
 # Common print preset
 [print:*common predator 0.6 nozzle*]
 inherits = *common predator*
 first_layer_height = 0.24
+infill_overlap = 27%
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_PREDATOR.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/ and nozzle_diameter[0]==0.6
 
 # Common print preset
 [print:*common predator 0.8 nozzle*]
 inherits = *common predator*
 first_layer_height = 0.32
+infill_overlap = 30%
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_PREDATOR.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/ and nozzle_diameter[0]==0.8
 
 # Common print preset
@@ -1694,7 +1696,7 @@ printer_technology = FFF
 printer_variant = 0.4
 thumbnails = 16x16,220x124
 bed_shape = 188.779x16.516,186.621x32.9063,183.043x49.0462,178.072x64.8128,171.745x80.0862,164.112x94.75,155.229x108.693,145.165x121.808,133.997x133.997,121.808x145.165,108.693x155.229,94.75x164.112,80.0862x171.745,64.8128x178.072,49.0462x183.043,32.9063x186.621,16.516x188.779,1.16035e-14x189.5,-16.516x188.779,-32.9063x186.621,-49.0462x183.043,-64.8128x178.072,-80.0862x171.745,-94.75x164.112,-108.693x155.229,-121.808x145.165,-133.997x133.997,-145.165x121.808,-155.229x108.693,-164.112x94.75,-171.745x80.0862,-178.072x64.8128,-183.043x49.0462,-186.621x32.9063,-188.779x16.516,-189.5x2.32071e-14,-188.779x-16.516,-186.621x-32.9063,-183.043x-49.0462,-178.072x-64.8128,-171.745x-80.0862,-164.112x-94.75,-155.229x-108.693,-145.165x-121.808,-133.997x-133.997,-121.808x-145.165,-108.693x-155.229,-94.75x-164.112,-80.0862x-171.745,-64.8128x-178.072,-49.0462x-183.043,-32.9063x-186.621,-16.516x-188.779,-3.48106e-14x-189.5,16.516x-188.779,32.9063x-186.621,49.0462x-183.043,64.8128x-178.072,80.0862x-171.745,94.75x-164.112,108.693x-155.229,121.808x-145.165,133.997x-133.997,145.165x-121.808,155.229x-108.693,164.112x-94.75,171.745x-80.0862,178.072x-64.8128,183.043x-49.0462,186.621x-32.9063,188.779x-16.516,189.5x-4.64141e-14
-max_print_height = 450
+max_print_height = 445
 z_offset = 0
 single_extruder_multi_material = 0
 gcode_flavor = reprap
@@ -1704,8 +1706,8 @@ use_relative_e_distances = 0
 use_firmware_retraction = 0
 use_volumetric_e = 0
 variable_layer_height = 1
-start_gcode = "; start_gcode | start\n\n; v11 2020-09-02_14-27 tillverka\n\n; set metric values\n\nG21\n\n; use absolute positioning\n\nG90\n\n; set extruder to absolute mode\n\nM82\n\n; start with fan off\n\nM107\n\n; set e-steps for bondtech bmg and force store in eeprom\n; mm/step for chitu\n; 1/415 for bondtech bmg\n\nM8011 S0.0024096394\nM8500\n\n; set temps\n\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\n\n; home xy\n\nG28 X0 Y0\n\n; home z\n\nG28 Z0\n\n; move the head down to Z 94mm\n\nG1 Z94.0 F2394\n\n; set and wait for temps\n\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\n\n; zero the extruded length\n\nG92 E0\n\n; extrude 3mm of feed stock\n\nG1 F200 E3\n\n; zero the extruded length again\n\nG92 E0\n\n; set speed\n\nG1 F{travel_speed}\n\n; print preskirt\n\nG92 E0\nG1 E3.94000 F2520.00000\n\nG1 X125.464 Y-139.310\nG1 Z0.329 F3994.000\n\nG1 F994.000\n\nG1 X125.464 Y-139.310 E4.19679\nG1 X130.218 Y-134.876 E4.70359\nG1 X132.569 Y-132.567 E4.96053\nG1 X137.099 Y-127.877 E5.46890\nG1 X139.325 Y-125.447 E5.72585\nG1 X141.507 Y-122.981 E5.98254\nG1 X145.685 Y-118.002 E6.48934\nG1 X149.741 Y-112.810 E7.00296\nG1 X153.561 Y-107.552 E7.50975\nG1 X155.440 Y-104.819 E7.76827\nG1 X158.980 Y-99.367 E8.27506\nG1 X160.702 Y-96.558 E8.53201\nG1 X163.962 Y-90.911 E9.04038\nG1 X165.535 Y-88.015 E9.29732\nG1 X168.496 Y-82.205 E9.80570\nG1 X169.915 Y-79.231 E10.06264\nG1 X171.280 Y-76.235 E10.31934\nG1 X173.819 Y-70.251 E10.82613\nG1 X176.180 Y-64.101 E11.33975\nG1 X178.297 Y-57.955 E11.84654\nG1 X179.294 Y-54.793 E12.10507\nG1 X181.085 Y-48.544 E12.61186\nG1 X181.911 Y-45.354 E12.86880\nG1 X183.378 Y-39.001 E13.37718\nG1 X184.035 Y-35.771 E13.63412\nG1 X185.168 Y-29.350 E14.14250\nG1 X185.655 Y-26.091 E14.39944\nG1 X186.084 Y-22.826 E14.65614\nG1 X186.764 Y-16.362 E15.16293\nG1 X187.223 Y-9.790 E15.67655\nG1 X187.450 Y-3.294 E16.18334\nG1 X187.479 Y0.002 E16.44028\nG1 X187.450 Y3.294 E16.69698\nG1 X187.223 Y9.810 E17.20529\nG1 X187.021 Y13.100 E17.46229\nG1 X186.454 Y19.575 E17.96909\nG1 X186.079 Y22.870 E18.22761\nG1 X185.174 Y29.307 E18.73440\nG1 X184.031 Y35.794 E19.24802\nG1 X182.679 Y42.152 E19.75481\nG1 X181.910 Y45.357 E20.01176\nG1 X180.223 Y51.655 E20.52013\nG1 X179.287 Y54.815 E20.77708\nG1 X177.272 Y61.017 E21.28545\nG1 X176.172 Y64.123 E21.54239\nG1 X175.019 Y67.207 E21.79909\nG1 X172.584 Y73.234 E22.30588\nG1 X169.905 Y79.252 E22.81950\nG1 X167.055 Y85.094 E23.32629\nG1 X165.524 Y88.035 E23.58482\nG1 X162.373 Y93.721 E24.09161\nG1 X160.700 Y96.560 E24.34855\nG1 X157.245 Y102.090 E24.85693\nG1 X155.427 Y104.838 E25.11387\nG1 X151.687 Y110.180 E25.62225\nG1 X149.727 Y112.829 E25.87919\nG1 X147.722 Y115.441 E26.13588\nG1 X143.631 Y120.493 E26.64268\nG1 X139.310 Y125.464 E27.15629\nG1 X134.876 Y130.218 E27.66309\nG1 X132.567 Y132.569 E27.92003\nG1 X127.877 Y137.099 E28.42840\nG1 X125.447 Y139.325 E28.68535\nG1 X122.981 Y141.507 E28.94204\nG1 X118.002 Y145.685 E29.44883\nG1 X112.810 Y149.741 E29.96245\nG1 X107.552 Y153.561 E30.46924\nG1 X104.819 Y155.440 E30.72777\nG1 X99.367 Y158.980 E31.23456\nG1 X96.558 Y160.702 E31.49151\nG1 X90.911 Y163.962 E31.99988\nG1 X88.015 Y165.535 E32.25682\nG1 X82.205 Y168.496 E32.76520\nG1 X79.231 Y169.915 E33.02214\nG1 X76.235 Y171.280 E33.27884\nG1 X70.251 Y173.819 E33.78563\nG1 X64.101 Y176.180 E34.29925\nG1 X57.955 Y178.297 E34.80604\nG1 X54.793 Y179.294 E35.06457\nG1 X48.544 Y181.085 E35.57136\nG1 X45.354 Y181.911 E35.82830\nG1 X39.001 Y183.378 E36.33668\nG1 X35.771 Y184.035 E36.59362\nG1 X29.350 Y185.168 E37.10200\nG1 X26.091 Y185.655 E37.35894\nG1 X22.826 Y186.084 E37.61563\nG1 X16.362 Y186.764 E38.12242\nG1 X9.790 Y187.223 E38.63605\nG1 X3.294 Y187.450 E39.14283\nG1 X-0.002 Y187.479 E39.39978\nG1 X-3.294 Y187.450 E39.65648\nG1 X-9.810 Y187.223 E40.16479\nG1 X-13.100 Y187.021 E40.42179\nG1 X-19.575 Y186.454 E40.92858\nG1 X-22.870 Y186.079 E41.18711\nG1 X-29.307 Y185.174 E41.69390\nG1 X-35.794 Y184.031 E42.20752\nG1 X-42.152 Y182.679 E42.71431\nG1 X-45.357 Y181.910 E42.97126\nG1 X-51.655 Y180.223 E43.47963\nG1 X-54.815 Y179.287 E43.73657\nG1 X-61.017 Y177.272 E44.24495\nG1 X-64.123 Y176.172 E44.50189\nG1 X-67.207 Y175.019 E44.75859\nG1 X-73.234 Y172.584 E45.26538\nG1 X-79.252 Y169.905 E45.77900\nG1 X-85.094 Y167.055 E46.28579\nG1 X-88.035 Y165.524 E46.54432\nG1 X-93.721 Y162.373 E47.05111\nG1 X-96.560 Y160.700 E47.30805\nG1 X-102.090 Y157.245 E47.81643\nG1 X-104.838 Y155.427 E48.07337\nG1 X-110.180 Y151.687 E48.58174\nG1 X-112.829 Y149.727 E48.83869\nG1 X-115.441 Y147.722 E49.09538\nG1 X-120.493 Y143.631 E49.60218\nG1 X-125.464 Y139.310 E50.11579\nG1 X-130.218 Y134.876 E50.62259\nG1 X-132.569 Y132.567 E50.87953\nG1 X-137.099 Y127.877 E51.38790\nG1 X-139.325 Y125.447 E51.64485\nG1 X-141.507 Y122.981 E51.90154\nG1 X-145.685 Y118.002 E52.40833\nG1 X-149.741 Y112.810 E52.92195\nG1 X-153.561 Y107.552 E53.42874\nG1 X-155.440 Y104.819 E53.68727\nG1 X-158.980 Y99.367 E54.19406\nG1 X-160.702 Y96.558 E54.45101\nG1 X-163.962 Y90.91Line truncated
-end_gcode = "; end_gcode | start\n\n; v11 2020-09-02_14-27 tillverka\n\n; use relative positioning\n\nG91\n\n; retract the filament a bit before lifting the nozzle to release some of the pressure\n\nG1 E-1 F300\n\n; home\n\nG28\n\n; use absolute positioning\n\nG90\n\n; cooldown\n\nM104 S0\nM140 S0\n\n; end_gcode | end\n"
+start_gcode = ; start_gcode | start\n\n; v11 2020-11-14_11-27 tillverka\n\n; set metric values\n\nG21\n\n; use absolute positioning\n\nG90\n\n; set extruder to absolute mode\n\nM82\n\n; start with fan off\n\nM107\n\n; set temps\n\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\n\n; home xy\n\nG28 X0 Y0\n\n; home z\n\nG28 Z0\n\n; move the head down to Z 94mm\n\nG1 Z94.0 F2394\n\n; set and wait for temps\n\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\n\n; zero the extruded length\n\nG92 E0\n\n; extrude 3mm of feed stock\n\nG1 F200 E3\n\n; zero the extruded length again\n\nG92 E0\n\n; set speed\n\nG1 F{travel_speed}\n\n; print preskirt\n\nG92 E0\nG1 E3.94000 F2520.00000\n\nG1 X125.464 Y-139.310\nG1 Z0.329 F3994.000\n\nG1 F994.000\n\nG1 X125.464 Y-139.310 E4.19679\nG1 X130.218 Y-134.876 E4.70359\nG1 X132.569 Y-132.567 E4.96053\nG1 X137.099 Y-127.877 E5.46890\nG1 X139.325 Y-125.447 E5.72585\nG1 X141.507 Y-122.981 E5.98254\nG1 X145.685 Y-118.002 E6.48934\nG1 X149.741 Y-112.810 E7.00296\nG1 X153.561 Y-107.552 E7.50975\nG1 X155.440 Y-104.819 E7.76827\nG1 X158.980 Y-99.367 E8.27506\nG1 X160.702 Y-96.558 E8.53201\nG1 X163.962 Y-90.911 E9.04038\nG1 X165.535 Y-88.015 E9.29732\nG1 X168.496 Y-82.205 E9.80570\nG1 X169.915 Y-79.231 E10.06264\nG1 X171.280 Y-76.235 E10.31934\nG1 X173.819 Y-70.251 E10.82613\nG1 X176.180 Y-64.101 E11.33975\nG1 X178.297 Y-57.955 E11.84654\nG1 X179.294 Y-54.793 E12.10507\nG1 X181.085 Y-48.544 E12.61186\nG1 X181.911 Y-45.354 E12.86880\nG1 X183.378 Y-39.001 E13.37718\nG1 X184.035 Y-35.771 E13.63412\nG1 X185.168 Y-29.350 E14.14250\nG1 X185.655 Y-26.091 E14.39944\nG1 X186.084 Y-22.826 E14.65614\nG1 X186.764 Y-16.362 E15.16293\nG1 X187.223 Y-9.790 E15.67655\nG1 X187.450 Y-3.294 E16.18334\nG1 X187.479 Y0.002 E16.44028\nG1 X187.450 Y3.294 E16.69698\nG1 X187.223 Y9.810 E17.20529\nG1 X187.021 Y13.100 E17.46229\nG1 X186.454 Y19.575 E17.96909\nG1 X186.079 Y22.870 E18.22761\nG1 X185.174 Y29.307 E18.73440\nG1 X184.031 Y35.794 E19.24802\nG1 X182.679 Y42.152 E19.75481\nG1 X181.910 Y45.357 E20.01176\nG1 X180.223 Y51.655 E20.52013\nG1 X179.287 Y54.815 E20.77708\nG1 X177.272 Y61.017 E21.28545\nG1 X176.172 Y64.123 E21.54239\nG1 X175.019 Y67.207 E21.79909\nG1 X172.584 Y73.234 E22.30588\nG1 X169.905 Y79.252 E22.81950\nG1 X167.055 Y85.094 E23.32629\nG1 X165.524 Y88.035 E23.58482\nG1 X162.373 Y93.721 E24.09161\nG1 X160.700 Y96.560 E24.34855\nG1 X157.245 Y102.090 E24.85693\nG1 X155.427 Y104.838 E25.11387\nG1 X151.687 Y110.180 E25.62225\nG1 X149.727 Y112.829 E25.87919\nG1 X147.722 Y115.441 E26.13588\nG1 X143.631 Y120.493 E26.64268\nG1 X139.310 Y125.464 E27.15629\nG1 X134.876 Y130.218 E27.66309\nG1 X132.567 Y132.569 E27.92003\nG1 X127.877 Y137.099 E28.42840\nG1 X125.447 Y139.325 E28.68535\nG1 X122.981 Y141.507 E28.94204\nG1 X118.002 Y145.685 E29.44883\nG1 X112.810 Y149.741 E29.96245\nG1 X107.552 Y153.561 E30.46924\nG1 X104.819 Y155.440 E30.72777\nG1 X99.367 Y158.980 E31.23456\nG1 X96.558 Y160.702 E31.49151\nG1 X90.911 Y163.962 E31.99988\nG1 X88.015 Y165.535 E32.25682\nG1 X82.205 Y168.496 E32.76520\nG1 X79.231 Y169.915 E33.02214\nG1 X76.235 Y171.280 E33.27884\nG1 X70.251 Y173.819 E33.78563\nG1 X64.101 Y176.180 E34.29925\nG1 X57.955 Y178.297 E34.80604\nG1 X54.793 Y179.294 E35.06457\nG1 X48.544 Y181.085 E35.57136\nG1 X45.354 Y181.911 E35.82830\nG1 X39.001 Y183.378 E36.33668\nG1 X35.771 Y184.035 E36.59362\nG1 X29.350 Y185.168 E37.10200\nG1 X26.091 Y185.655 E37.35894\nG1 X22.826 Y186.084 E37.61563\nG1 X16.362 Y186.764 E38.12242\nG1 X9.790 Y187.223 E38.63605\nG1 X3.294 Y187.450 E39.14283\nG1 X-0.002 Y187.479 E39.39978\nG1 X-3.294 Y187.450 E39.65648\nG1 X-9.810 Y187.223 E40.16479\nG1 X-13.100 Y187.021 E40.42179\nG1 X-19.575 Y186.454 E40.92858\nG1 X-22.870 Y186.079 E41.18711\nG1 X-29.307 Y185.174 E41.69390\nG1 X-35.794 Y184.031 E42.20752\nG1 X-42.152 Y182.679 E42.71431\nG1 X-45.357 Y181.910 E42.97126\nG1 X-51.655 Y180.223 E43.47963\nG1 X-54.815 Y179.287 E43.73657\nG1 X-61.017 Y177.272 E44.24495\nG1 X-64.123 Y176.172 E44.50189\nG1 X-67.207 Y175.019 E44.75859\nG1 X-73.234 Y172.584 E45.26538\nG1 X-79.252 Y169.905 E45.77900\nG1 X-85.094 Y167.055 E46.28579\nG1 X-88.035 Y165.524 E46.54432\nG1 X-93.721 Y162.373 E47.05111\nG1 X-96.560 Y160.700 E47.30805\nG1 X-102.090 Y157.245 E47.81643\nG1 X-104.838 Y155.427 E48.07337\nG1 X-110.180 Y151.687 E48.58174\nG1 X-112.829 Y149.727 E48.83869\nG1 X-115.441 Y147.722 E49.09538\nG1 X-120.493 Y143.631 E49.60218\nG1 X-125.464 Y139.310 E50.11579\nG1 X-130.218 Y134.876 E50.62259\nG1 X-132.569 Y132.567 E50.87953\nG1 X-137.099 Y127.877 E51.38790\nG1 X-139.325 Y125.447 E51.64485\nG1 X-141.507 Y122.981 E51.90154\nG1 X-145.685 Y118.002 E52.40833\nG1 X-149.741 Y112.810 E52.92195\nG1 X-153.561 Y107.552 E53.42874\nG1 X-155.440 Y104.819 E53.68727\nG1 X-158.980 Y99.367 E54.19406\nG1 X-160.702 Y96.558 E54.45101\nG1 X-163.962 Y90.911 E54.95938\nG1 X-165.535 Y88.015 E55.21632\nG1 X-168.496 Y82.205 E55.72470\nG1 X-169.915 Y79.231 E55.98164\nG1 X-171.280 Y76.235 E56.2383Line truncated
+end_gcode = ; end_gcode | start\n\n; v11 2020-11-14_11-27 tillverka\n\n; use relative positioning\n\nG91\n\n; retract the filament a bit before lifting the nozzle to release some of the pressure\n\nG1 E-1 F300\n\n; home\n\nG28\n\n; use absolute positioning\n\nG90\n\n; cooldown\n\nM104 S0\nM140 S0\n\n; end_gcode | end\n
 before_layer_gcode =
 layer_gcode =
 toolchange_gcode =

resources/profiles/BIBO.idx

@@ -1,3 +1,5 @@
+min_slic3r_version = 2.3.0-beta2
+0.0.3 Removed obsolete host keys.
 min_slic3r_version = 2.2.0-alpha3
 0.0.2 General print quality improvements
 0.0.1 Multiple Print models were unified into a single one.

resources/profiles/BIBO.ini

@@ -5,7 +5,7 @@
 name = BIBO
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.2
+config_version = 0.0.3
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
 
@@ -722,13 +722,9 @@ layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
 max_layer_height = 0.30
 min_layer_height = 0.05
 max_print_height = 160
-octoprint_apikey = 
-octoprint_host = 
 printer_notes = 
 printer_settings_id = 
 printer_vendor = BIBO
-printhost_apikey = 
-printhost_cafile = 
 retract_before_travel = 1
 retract_before_wipe = 100%
 retract_layer_change = 1
@@ -740,8 +736,6 @@ retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 20
-serial_port = 
-serial_speed = 250000
 single_extruder_multi_material = 0
 toolchange_gcode = 
 use_firmware_retraction = 0

resources/profiles/Creality.idx

@@ -1,4 +1,14 @@
+min_slic3r_version = 2.3.0-rc2
+0.0.12 Added Ender-3V2 and filament profiles.
+min_slic3r_version = 2.3.0-beta2
+0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus.
+0.0.10 Parameter consistency improvements. Enabled conservative elephant foot compensation.
+0.0.9 Fixed end g-code for Ender 5.
+0.0.8 Slight end g-code improvements and spool weights.
 min_slic3r_version = 2.3.0-alpha2
+0.0.7 Updated start g-code for Creality printers.
+0.0.6 Added filament profiles, adjusted temperatures, updated start g-code for some models.
+0.0.5 Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. Updated OPTIMAL print profile.
 0.0.4 Added initial CR-10 profile, end g-code improvements.
 min_slic3r_version = 2.3.0-alpha0
 0.0.3 Added Ender-2, Ender-3 BLTouch, updated Ender-3 bed texture.

resources/profiles/Creality.ini

@@ -5,7 +5,7 @@
 name = Creality
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.4
+config_version = 0.0.12
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -23,6 +23,15 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
 
+[printer_model:ENDER3V2]
+name = Creality Ender-3V2
+variants = 0.4
+technology = FFF
+family = ENDER
+bed_model = ender3_bed.stl
+bed_texture = ender3.svg
+default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+
 [printer_model:ENDER3BLTOUCH]
 name = Creality Ender-3 BLTouch
 variants = 0.4
@@ -172,7 +181,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 complete_objects = 0
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeters_first = 0
@@ -260,6 +269,13 @@ wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:*0.08mm*]
+inherits = *common*
+layer_height = 0.08
+perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+
 [print:*0.10mm*]
 inherits = *common*
 layer_height = 0.1
@@ -274,9 +290,9 @@ perimeters = 3
 bottom_solid_layers = 6
 top_solid_layers = 7
 
-[print:*0.15mm*]
+[print:*0.16mm*]
 inherits = *common*
-layer_height = 0.15
+layer_height = 0.16
 bottom_solid_layers = 5
 top_solid_layers = 7
 
@@ -293,6 +309,17 @@ top_infill_extrusion_width = 0.45
 bottom_solid_layers = 3
 top_solid_layers = 4
 
+[print:*0.28mm*]
+inherits = *common*
+layer_height = 0.28
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.08mm SUPERDETAIL @CREALITY]
+inherits = *0.08mm*
+compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+
 [print:0.10mm HIGHDETAIL @CREALITY]
 inherits = *0.10mm*
 renamed_from = "0.10mm HIGHDETAIL @ENDER3"
@@ -303,9 +330,9 @@ inherits = *0.12mm*
 renamed_from = "0.12mm DETAIL @ENDER3"
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
-[print:0.15mm OPTIMAL @CREALITY]
-inherits = *0.15mm*
-renamed_from = "0.15mm OPTIMAL @ENDER3"
+[print:0.16mm OPTIMAL @CREALITY]
+inherits = *0.16mm*
+renamed_from = "0.15mm OPTIMAL @ENDER3"; "0.15mm OPTIMAL @CREALITY"
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
 [print:0.20mm NORMAL @CREALITY]
@@ -318,6 +345,10 @@ inherits = *0.24mm*
 renamed_from = "0.24mm DRAFT @ENDER3"
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
+[print:0.28mm SUPERDRAFT @CREALITY]
+inherits = *0.28mm*
+compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+
 # Common filament preset
 [filament:*common*]
 cooling = 0
@@ -337,20 +368,20 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
 inherits = *common*
 bed_temperature = 60
 fan_below_layer_time = 100
-filament_colour = #FF3232
+filament_colour = #DDDDDD
 filament_max_volumetric_speed = 15
 filament_type = PLA
 filament_density = 1.24
 filament_cost = 20
-first_layer_bed_temperature = 40
-first_layer_temperature = 215
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
 fan_always_on = 1
 cooling = 1
 max_fan_speed = 100
 min_fan_speed = 100
 bridge_fan_speed = 100
 disable_fan_first_layers = 1
-temperature = 210
+temperature = 205
 
 [filament:*PET*]
 inherits = *common*
@@ -358,7 +389,7 @@ bed_temperature = 70
 cooling = 1
 disable_fan_first_layers = 3
 fan_below_layer_time = 20
-filament_colour = #FF8000
+filament_colour = #DDDDDD
 filament_max_volumetric_speed = 8
 filament_type = PETG
 filament_density = 1.27
@@ -377,7 +408,7 @@ bed_temperature = 100
 cooling = 0
 disable_fan_first_layers = 3
 fan_below_layer_time = 20
-filament_colour = #3A80CA
+filament_colour = #DDDDDD
 filament_max_volumetric_speed = 11
 filament_type = ABS
 filament_density = 1.04
@@ -412,10 +443,11 @@ filament_vendor = Generic
 inherits = *PLA*
 renamed_from = "Creality PLA @ENDER3"
 filament_vendor = Creality
-temperature = 205
-bed_temperature = 40
-first_layer_temperature = 210
-first_layer_bed_temperature = 40
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 205
+first_layer_bed_temperature = 60
+filament_colour = #42BDD8
 
 [filament:Creality PETG @CREALITY]
 inherits = *PET*
@@ -427,6 +459,7 @@ first_layer_temperature = 240
 first_layer_bed_temperature = 70
 max_fan_speed = 40
 min_fan_speed = 20
+filament_colour = #42BDD8
 
 [filament:Creality ABS @CREALITY]
 inherits = *ABS*
@@ -436,17 +469,19 @@ temperature = 240
 bed_temperature = 90
 first_layer_temperature = 240
 first_layer_bed_temperature = 90
+filament_colour = #42BDD8
 
 [filament:Prusament PLA @CREALITY]
 inherits = *PLA*
 renamed_from = "Prusament PLA @ENDER3"
 filament_vendor = Prusa Polymers
-temperature = 215
-bed_temperature = 40
+temperature = 210
+bed_temperature = 60
 first_layer_temperature = 215
-first_layer_bed_temperature = 40
+first_layer_bed_temperature = 60
 filament_cost = 24.99
 filament_density = 1.24
+filament_colour = #F94D0C
 
 [filament:Prusament PETG @CREALITY]
 inherits = *PET*
@@ -458,6 +493,18 @@ first_layer_temperature = 245
 first_layer_bed_temperature = 70
 filament_cost = 24.99
 filament_density = 1.27
+filament_colour = #F94D0C
+
+[filament:AzureFilm PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = AzureFilm
+temperature = 210
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 19.97
+filament_density = 1.24
+filament_colour = #006AA6
 
 [filament:Devil Design PLA @CREALITY]
 inherits = *PLA*
@@ -468,6 +515,18 @@ first_layer_temperature = 215
 first_layer_bed_temperature = 60
 filament_cost = 19.00
 filament_density = 1.24
+filament_colour = #FF0000
+
+[filament:Devil Design PLA (Galaxy) @CREALITY]
+inherits = *PLA*
+filament_vendor = Devil Design
+temperature = 225
+bed_temperature = 65
+first_layer_temperature = 225
+first_layer_bed_temperature = 65
+filament_cost = 19.00
+filament_density = 1.24
+filament_colour = #FF0000
 
 [filament:Extrudr PLA NX2 @CREALITY]
 inherits = *PLA*
@@ -478,6 +537,8 @@ first_layer_temperature = 205
 first_layer_bed_temperature = 60
 filament_cost = 23.63
 filament_density = 1.3
+filament_colour = #3C4547
+filament_spool_weight = 256
 
 [filament:Real Filament PLA @CREALITY]
 inherits = *PLA*
@@ -488,38 +549,94 @@ first_layer_temperature = 200
 first_layer_bed_temperature = 60
 filament_cost = 24.99
 filament_density = 1.24
+filament_colour = #007ABF
+
+[filament:Velleman PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = Velleman
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 205
+first_layer_bed_temperature = 60
+filament_cost = 27.99
+filament_density = 1.24
+filament_colour = #7EA60D
+
+[filament:3DJAKE ecoPLA @CREALITY]
+inherits = *PLA*
+filament_vendor = 3DJAKE
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 205
+first_layer_bed_temperature = 60
+filament_cost = 21.99
+filament_density = 1.24
+filament_colour = #125467
+filament_spool_weight = 238
+
+[filament:123-3D Jupiter PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = 123-3D
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 205
+first_layer_bed_temperature = 60
+filament_cost = 19.50
+filament_density = 1.24
+filament_colour = #FFE200
+
+[filament:Das Filament PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = Das Filament
+temperature = 215
+bed_temperature = 50
+first_layer_temperature = 215
+first_layer_bed_temperature = 50
+filament_cost = 20.56
+filament_density = 1.24
+
+[filament:Das Filament PETG @CREALITY]
+inherits = *PET*
+filament_vendor = Das Filament
+temperature = 240
+bed_temperature = 70
+first_layer_temperature = 240
+first_layer_bed_temperature = 70
+filament_cost = 27.44
+filament_density = 1.29
 
 # Common printer preset
 [printer:*common*]
 printer_technology = FFF
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
 between_objects_gcode = 
+pause_print_gcode = 
 deretract_speed = 0
 extruder_colour = #FFFF00
 extruder_offset = 0x0
 gcode_flavor = marlin
 silent_mode = 0
 remaining_times = 0
-machine_max_acceleration_e = 10000
-machine_max_acceleration_extruding = 2000
-machine_max_acceleration_retracting = 1500
-machine_max_acceleration_x = 3000
-machine_max_acceleration_y = 3000
-machine_max_acceleration_z = 500
-machine_max_feedrate_e = 120
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
 machine_max_feedrate_x = 500
 machine_max_feedrate_y = 500
-machine_max_feedrate_z = 12
-machine_max_jerk_e = 2.5
-machine_max_jerk_x = 20
-machine_max_jerk_y = 20
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
 machine_max_jerk_z = 0.4
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
 max_layer_height = 0.3
 min_layer_height = 0.07
-max_print_height = 200
+max_print_height = 250
 nozzle_diameter = 0.4
 printer_notes = 
 printer_settings_id = 
@@ -543,16 +660,16 @@ variable_layer_height = 1
 wipe = 1
 z_offset = 0
 printer_model = 
-default_print_profile = 
-default_filament_profile = 
+default_print_profile = 0.16mm OPTIMAL @CREALITY
+default_filament_profile = Generic PLA @CREALITY
 
 [printer:Creality Ender-3]
 inherits = *common*
 renamed_from = "Creality ENDER-3"
 printer_model = ENDER3
 printer_variant = 0.4
-max_layer_height = 0.25
-min_layer_height = 0.1
+max_layer_height = 0.28
+min_layer_height = 0.08
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
 bed_shape = 3x3,228x3,228x228,3x228
 max_print_height = 250
@@ -578,19 +695,26 @@ retract_length = 5
 retract_speed = 60
 deretract_speed = 40
 retract_before_wipe = 70%
-default_print_profile = 0.15mm OPTIMAL @CREALITY
-default_filament_profile = Creality PLA @CREALITY
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15.0 F1200.0 ; intro line\nG92 E0.0
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+min(layer_z+70, max_print_height-10)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
 
-[printer:*abl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15.0 F1200.0 ; intro line\nG92 E0.0
+[printer:Creality Ender-3V2]
+inherits = Creality Ender-3
+printer_model = ENDER3V2
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+
+[printer:*fastabl*]
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
+
+[printer:*slowabl*]
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
 
 [printer:*invertedz*]
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down\nM84 X Y E ; disable motors
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down further down\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
 
 [printer:Creality Ender-3 BLTouch]
-inherits = Creality Ender-3; *abl*
+inherits = Creality Ender-3; *fastabl*
 renamed_from = "Creality ENDER-3 BLTouch"
 printer_model = ENDER3BLTOUCH
 
@@ -601,14 +725,20 @@ bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
 printer_model = ENDER5
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN
 max_print_height = 300
+machine_max_acceleration_e = 1000
+machine_max_feedrate_z = 5
 
 [printer:Creality Ender-5 Plus]
-inherits = Creality Ender-3; *abl*; *invertedz*
+inherits = Creality Ender-3; *slowabl*; *invertedz*
 retract_length = 6
 bed_shape = 5x5,355x5,355x355,5x355
 printer_model = ENDER5PLUS
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PLUS\nPRINTER_HAS_BOWDEN
 max_print_height = 400
+machine_max_acceleration_e = 1000
+machine_max_feedrate_z = 5
+machine_max_feedrate_x = 300
+machine_max_feedrate_y = 300
 
 [printer:Creality Ender-2]
 inherits = Creality Ender-3
@@ -617,8 +747,8 @@ bed_shape = 0x0,150x0,150x150,0x150
 printer_model = ENDER2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER2\nPRINTER_HAS_BOWDEN
 max_print_height = 200
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 X15 Y135 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15.0 F1200.0 ; intro line\nG92 E0.0
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y140 F3000 ; present print\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 X15 Y135 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y140 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+30, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
 
 [printer:Creality CR-10 Mini]
 inherits = Creality Ender-3
@@ -661,7 +791,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in
 max_print_height = 400
 
 [printer:Creality CR-10 S Pro]
-inherits = Creality Ender-3; *abl*
+inherits = Creality Ender-3; *slowabl*
 retract_length = 6
 bed_shape = 0x0,300x0,300x300,0x300
 printer_model = CR10SPRO
@@ -669,7 +799,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in
 max_print_height = 400
 
 [printer:Creality CR-10 S Pro V2]
-inherits = Creality Ender-3; *abl*
+inherits = Creality Ender-3; *slowabl*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
 printer_model = CR10SPROV2
@@ -698,7 +828,7 @@ printer_model = CR20
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20\nPRINTER_HAS_BOWDEN
 
 [printer:Creality CR-20 Pro]
-inherits = Creality Ender-3; *abl*
+inherits = Creality Ender-3; *fastabl*
 retract_length = 4
 printer_model = CR20PRO
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20PRO\nPRINTER_HAS_BOWDEN

resources/profiles/FLSun.idx

@@ -0,0 +1,2 @@
+min_slic3r_version = 2.3.0-rc2
+0.0.1 Initial Version

resources/profiles/FLSun.ini

@@ -0,0 +1,842 @@
+# Print profiles for the FLSun Delta printers.
+## 
+# Author: https://github.com/Foxies-CSTL/PrusaSlicer
+## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/5582
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = FLSun
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 0.0.1
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/
+# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:QQSP]
+name = FLSun QQS Pro
+variants = 0.4; 0.6
+technology = FFF
+bed_model = QQSP_bed.stl
+bed_texture = QQSP.svg
+default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
+
+[printer_model:Q5]
+name = FLSun Q5
+variants = 0.4; 0.6
+technology = FFF
+bed_model = Q5_bed.stl
+bed_texture = Q5.svg
+default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
+
+#########################################
+###### begin Common print presets #######
+#########################################
+
+# Common print preset
+[print:*common_flsunq*]
+avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 800
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 800
+dont_support_bridges = 1
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.45
+extra_perimeters = 0
+extruder_clearance_height = 45
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 800
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gco
+perimeters = 3
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirts = 2
+skirt_distance = 5
+skirt_height = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_auto = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.38
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.2
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_min_thickness = 0.6
+travel_speed = 150
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+## QQS
+
+[print:*QQSP*]
+bridge_acceleration = 1000
+default_acceleration = 1500
+first_layer_acceleration = 1000
+infill_acceleration = 800
+max_print_speed = 200
+perimeter_acceleration = 800
+
+## Q5
+
+[print:*Q5*]
+bridge_acceleration = 1000
+default_acceleration = 800
+first_layer_acceleration = 800
+infill_acceleration = 1000
+max_print_speed = 150
+perimeter_acceleration = 800
+
+# Print parameters common to a 0.6mm diameter nozzle.
+
+[print:*0.6nozzleFLSUN*]
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+default_acceleration = 1000
+external_perimeter_extrusion_width = 0.65
+extrusion_width = 0.65
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+fill_density = 15%
+fill_pattern = gyroid
+infill_acceleration = 1000
+infill_extrusion_width = 0.68
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.68
+support_material_speed = 40
+support_material_contact_distance = 0.15
+support_material_extrusion_width = 0.55
+support_material_xy_spacing = 80%
+top_infill_extrusion_width = 0.6
+travel_speed = 150
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{print_time}.gco
+
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.08mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+
+[print:*0.08mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 10
+bridge_flow_ratio = 0.7
+layer_height = 0.08
+support_material_contact_distance = 0.06
+support_material_spacing = 1.5
+top_solid_layers = 12
+
+[print:0.08mm DETAIL @FLSUN]
+inherits = *0.08mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+bridge_acceleration = 200
+bridge_speed = 20
+external_perimeter_speed = 70%
+first_layer_acceleration = 500
+first_layer_speed = 40%
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 40
+max_print_speed = 80
+perimeter_acceleration = 300
+perimeter_speed = 30 
+small_perimeter_speed = 70%
+solid_infill_speed = 95%
+support_material_speed = 40
+top_solid_infill_speed = 60%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.15mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+
+[print:*0.15mm_vase_flsunq*]
+inherits = *common_flsunq*
+avoid_crossing_perimeters = 1
+bottom_solid_min_thickness = 0.5
+bridge_flow_ratio = 0.9
+elefant_foot_compensation = 0.15
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.9
+extra_perimeters = 1
+extrusion_width = 0.9
+first_layer_acceleration = 1000
+first_layer_height = 0.3
+first_layer_extrusion_width = 0.9
+first_layer_speed = 20
+fill_density = 0%
+infill_extrusion_width = 0.9
+ironing = 0
+layer_height = 0.15
+min_skirt_length = 4
+max_print_speed = 100
+only_retract_when_crossing_perimeters = 0
+perimeters = 1
+perimeter_extrusion_width = 0.9
+seam_position = aligned
+slice_closing_radius = 0.049
+solid_infill_extrusion_width = 0.6
+spiral_vase = 1
+support_material = 0
+top_solid_infill_speed = 40%
+top_solid_min_thickness = 0.6
+thin_walls = 0
+top_fill_pattern = rectilinear
+top_solid_layers = 0
+
+[print:0.15mm VASE @FLSUN]
+inherits = *0.15mm_vase_flsunq*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+bottom_solid_layers = 5
+external_perimeter_speed = 50%
+gap_fill_speed = 40
+infill_speed = 100
+perimeter_speed = 80
+small_perimeter_speed = 25%
+solid_infill_speed = 33%
+
+[print:0.15mm VASE SPEED @FLSUN]
+inherits = *0.15mm_vase_flsunq*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+bridge_speed = 80
+bottom_solid_layers = 3
+external_perimeter_speed = 60%
+gap_fill_speed = 30
+infill_speed = 80
+perimeter_speed = 90
+small_perimeter_speed = 50%
+solid_infill_speed = 80%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.16mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+
+[print:*0.16mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 5
+bridge_flow_ratio = 0.9
+layer_height = 0.16
+support_material_contact_distance = 0.12
+top_solid_layers = 6
+
+[print:0.16mm QUALITY @FLSUN]
+inherits = *0.16mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+fill_density = 15%
+fill_pattern = gyroid
+infill_speed = 80
+ironing = 0
+perimeter_speed = 90
+small_perimeter_speed = 25%
+solid_infill_speed = 50%
+top_solid_infill_speed = 30%
+
+[print:0.16mm SPEED @FLSUN]
+inherits = *0.16mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+infill_speed = 120
+perimeter_speed = 60
+small_perimeter_speed = 25%
+solid_infill_speed = 85%
+top_solid_infill_speed = 30%
+
+[print:0.16mm DETAIL @0.6 nozzle FLSUN]
+inherits = *0.16mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.16mm DETAIL
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_speed = 70
+max_print_speed = 80
+perimeter_speed = 40
+solid_infill_speed = 60
+top_solid_infill_speed = 45
+infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.20mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+
+[print:*0.20mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+layer_height = 0.20
+support_material_contact_distance = 0.2
+top_solid_layers = 5
+
+[print:0.20mm QUALITY @FLSUN]
+inherits = *0.20mm_flsunq*; *QQSP*
+avoid_crossing_perimeters = 1
+bridge_speed = 60
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+fill_density = 15%
+gap_fill_speed = 30
+infill_speed = 80
+ironing = 0
+ironing_speed = 20
+perimeter_speed = 50
+small_perimeter_speed = 85%
+solid_infill_speed = 90%
+thin_walls = 0
+top_solid_infill_speed = 50%
+
+[print:0.20mm DETAIL @0.6 nozzle FLSUN]
+inherits = *0.20mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.20mm DETAIL
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_speed = 70
+max_print_speed = 80
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 45
+infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+
+[print:0.20mm SPEED @FLSUN]
+inherits = *0.20mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50
+extra_perimeters = 1
+first_layer_speed = 35
+infill_speed = 90
+perimeter_speed = 60
+small_perimeter_speed = 50%
+solid_infill_speed = 85%
+top_solid_infill_speed = 40%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.24mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+
+[print:*0.24mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+layer_height = 0.24
+support_material_contact_distance = 0.18
+top_solid_layers = 4
+
+[print:0.24mm DRAFT @FLSUN]
+inherits = *0.24mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+first_layer_speed = 20%
+infill_speed = 120
+perimeter_speed = 60
+small_perimeter_speed = 50%
+solid_infill_speed = 95%
+top_solid_infill_speed = 50%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.30mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+
+[print:*0.30mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 3
+bridge_flow_ratio = 0.95
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+infill_extrusion_width = 0.5
+layer_height = 0.30
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+support_material_contact_distance = 0.22
+top_infill_extrusion_width = 0.45
+top_solid_layers = 4
+
+[print:0.30mm QUALITY @0.6 nozzle FLSUN]
+inherits = *0.30mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.30mm QUALITY
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_speed = 90
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 65
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+
+[print:0.30mm SPEED @FLSUN]
+inherits = *0.30mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+first_layer_speed = 20%
+infill_speed = 120
+perimeter_speed = 80
+small_perimeter_speed = 50%
+solid_infill_speed = 85%
+top_solid_infill_speed = 50%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.35mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+
+[print:*0.35mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.75
+layer_height = 0.35
+perimeter_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 50
+top_solid_layers = 4
+
+[print:0.35mm SPEED @0.6 nozzle FLSUN]
+inherits = *0.35mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.35mm SPEED
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 45
+infill_speed = 100
+max_print_speed = 120
+perimeter_speed = 65
+solid_infill_speed = 60
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.40mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+
+[print:*0.40mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.65
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.4
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+top_solid_layers = 4
+
+[print:0.40mm DRAFT @0.6 nozzle FLSUN]
+inherits = *0.40mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.40mm DRAFT
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 60
+infill_speed = 100
+max_print_speed = 120
+perimeter_speed = 60
+solid_infill_speed = 60
+top_solid_infill_speed = 60
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+
+#########################################
+########### end print presets ###########
+#########################################
+
+#########################################
+######## begin filament presets #########
+#########################################    
+                                                                                                      
+# Common filament preset
+[filament:*common_flsunq*]
+cooling = 0
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_fan_speed = 20
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n;M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.22{endif} ; Linear Advance 1.5\n"
+                            
+[filament:*PLA_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 60
+bridge_fan_speed = 95
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_density = 1.24
+filament_deretract_speed = 30
+filament_retract_length = 3
+filament_retract_lift = nil
+filament_retract_speed = 30
+filament_max_volumetric_speed = 10
+filament_type = PLA 
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 205
+max_fan_speed = 90
+min_fan_speed = 50
+temperature = 200
+
+[filament:*PLA_VASE_flsunq*]
+inherits = *PLA_flsunq*
+bridge_fan_speed = 100
+disable_fan_first_layers = 3
+fan_below_layer_time = 60
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+
+[filament:*SPLA_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 80
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #008000
+filament_density = 1.24
+filament_deretract_speed = 70
+filament_max_volumetric_speed = 8
+filament_retract_length = 7.5
+filament_retract_lift = nil
+filament_retract_speed = 70
+filament_type = PLA
+filament_wipe = nil
+first_layer_bed_temperature = 80
+first_layer_temperature = 230
+max_fan_speed = 70
+min_fan_speed = 50
+temperature = 215
+
+[filament:*PET_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 80
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FFFFFF
+filament_density = 1.27
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 8
+filament_retract_length = 4
+filament_retract_lift = 0.2
+filament_retract_speed = 45
+filament_type = PETG
+filament_wipe = 1
+first_layer_bed_temperature =80
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 20
+temperature = 230
+
+[filament:*FLEX_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 50
+bridge_fan_speed = 80
+compatible_printers_condition = nozzle_diameter[0]>0.35
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1.15
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #0000FF
+filament_density = 1.22
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 1.35
+filament_retract_length = 0.8
+filament_retract_lift = nil
+filament_retract_speed = nil
+filament_type = FLEX
+filament_wipe = 0
+first_layer_bed_temperature = 50
+first_layer_temperature = 240
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n;M900 K0; Disable Linear Advance 1.5\n"
+temperature = 240
+
+[filament:*ABS_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 90
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_retract_length = 5
+filament_retract_lift = nil
+filament_retract_speed = 50
+filament_max_volumetric_speed = 10
+filament_type = ABS
+filament_wipe = nil                   
+first_layer_bed_temperature = 90
+first_layer_temperature = 245
+max_fan_speed = 0
+min_fan_speed = 0
+slowdown_below_layer_time = 20
+temperature = 245
+top_fan_speed = 0
+
+[filament:Generic PLA @FLSUN]
+inherits = *PLA_flsunq*
+filament_vendor = Generic
+
+[filament:Generic PLA VASE @FLSUN]
+inherits = *PLA_VASE_flsunq*
+filament_vendor = Generic
+
+[filament:Generic PETG @FLSUN]
+inherits = *PET_flsunq*
+filament_vendor = Generic
+
+[filament:Generic ABS @FLSUN]
+inherits = *ABS_flsunq*
+filament_vendor = Generic
+
+[filament:Generic FLEX @FLSUN]
+inherits = *FLEX_flsunq*
+filament_vendor = Generic
+
+[filament:Generic SPLA @FLSUN]
+inherits = *SPLA_flsunq*
+filament_vendor = Generic
+
+#########################################
+######### end filament presets ##########
+#########################################
+
+#########################################
+######### begin printer presets #########
+#########################################
+
+# Common printer preset
+[printer:*common_flsunq*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 40
+end_gcode =
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.32
+min_layer_height = 0.08
+nozzle_diameter = 0.4
+printer_notes = 
+printer_settings_id = 
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 70%
+retract_layer_change = 0
+retract_length = 0
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+default_print_profile = 0.20mm QUALITY @FLSUN
+default_filament_profile = Generic PLA @FLSUN
+
+[printer:FLSun QQS Pro]
+inherits = *common_flsunq*
+bed_shape = 129.505x11.3302,128.025x22.5743,125.57x33.6465,122.16x44.4626,117.82x54.9404,112.583x65,106.49x74.5649,99.5858x83.5624,91.9239x91.9239,83.5624x99.5858,74.5649x106.49,65x112.583,54.9404x117.82,44.4626x122.16,33.6465x125.57,22.5743x128.025,11.3302x129.505,7.9602e-15x130,-11.3302x129.505,-22.5743x128.025,-33.6465x125.57,-44.4626x122.16,-54.9404x117.82,-65x112.583,-74.5649x106.49,-83.5624x99.5858,-91.9239x91.9239,-99.5858x83.5624,-106.49x74.5649,-112.583x65,-117.82x54.9404,-122.16x44.4626,-125.57x33.6465,-128.025x22.5743,-129.505x11.3302,-130x1.59204e-14,-129.505x-11.3302,-128.025x-22.5743,-125.57x-33.6465,-122.16x-44.4626,-117.82x-54.9404,-112.583x-65,-106.49x-74.5649,-99.5858x-83.5624,-91.9239x-91.9239,-83.5624x-99.5858,-74.5649x-106.49,-65x-112.583,-54.9404x-117.82,-44.4626x-122.16,-33.6465x-125.57,-22.5743x-128.025,-11.3302x-129.505,-2.38806e-14x-130,11.3302x-129.505,22.5743x-128.025,33.6465x-125.57,44.4626x-122.16,54.9404x-117.82,65x-112.583,74.5649x-106.49,83.5624x-99.5858,91.9239x-91.9239,99.5858x-83.5624,106.49x-74.5649,112.583x-65,117.82x-54.9404,122.16x-44.4626,125.57x-33.6465,128.025x-22.5743,129.505x-11.3302,130x-3.18408e-14
+end_gcode = ; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up\nG1 X0 Y120 F3000 ; present print\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\n;M900 K0 ; reset linear acceleration(Marlin)\n; Shut down printer\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM18 S180 ;disable motors after 180s\nM300 S40 P10 ; Bip\nM117 Print finish.
+machine_max_acceleration_e = 3000,800
+machine_max_acceleration_extruding = 1500,800
+machine_max_acceleration_retracting = 2000,800
+machine_max_acceleration_x = 1500,800
+machine_max_acceleration_y = 1500,800
+machine_max_acceleration_z = 1500,800
+machine_max_feedrate_e = 60,30
+machine_max_feedrate_x = 200,150
+machine_max_feedrate_y = 200,150
+machine_max_feedrate_z = 200,150
+machine_max_jerk_e = 5,5
+machine_max_jerk_x = 5,10
+machine_max_jerk_y = 5,10
+machine_max_jerk_z = 5,10
+max_print_height = 360
+nozzle_diameter = 0.4
+printer_model = QQSP
+printer_variant = 0.4
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_QQSP\nPRINTER_HAS_BOWDEN\n
+retract_length = 5
+retract_speed = 30
+retract_lift = 0.4
+silent_mode = 1
+start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250       ; wait between dual beep\nM300 S440 P200     ; 2nd beep for printer ready\nG4 S10             ; wait to clean the nozzle\nM300 S440 P200     ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started...
+thumbnails = 16x16,260x260
+use_relative_e_distances = 1
+use_volumetric_e = 0
+
+[printer:FLSun QQS Pro 0.6 nozzle]
+inherits = FLSun QQS Pro
+printer_variant = 0.6
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN
+retract_length = 3.5
+retract_lift = 0.4
+retract_speed = 30
+deretract_speed = 40
+retract_before_wipe = 70%
+retract_before_travel = 1
+
+[printer:FLSun Q5]
+inherits = *common_flsunq*
+bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
+end_gcode = M107\nM104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\n;M84\nM18 S180 ;disable motors after 180s\n
+machine_max_acceleration_e = 3000
+machine_max_acceleration_extruding = 1500
+machine_max_acceleration_retracting = 2000
+machine_max_acceleration_x = 1500
+machine_max_acceleration_y = 1500
+machine_max_acceleration_z = 1500
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 200
+machine_max_feedrate_y = 200
+machine_max_feedrate_z = 200
+machine_max_jerk_e = 5
+machine_max_jerk_x = 5
+machine_max_jerk_y = 5
+machine_max_jerk_z = 5
+max_print_height = 200
+nozzle_diameter = 0.4
+printer_model = Q5
+printer_variant = 0.4
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_Q5\nPRINTER_HAS_BOWDEN\n
+retract_length = 3
+retract_lift = 0.3
+start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n
+thumbnails = 16x16,200x200
+use_relative_e_distances = 1
+use_volumetric_e = 0
+
+[printer:FLSun Q5 0.6 nozzle]
+inherits = FLSun Q5
+printer_variant = 0.6
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN
+retract_length = 3
+retract_lift = 0.4
+retract_speed = 50
+deretract_speed = 40
+retract_before_wipe = 0
+retract_before_travel = 1
+
+#########################################
+####### end common print presets ########
+#########################################

resources/profiles/FLSun/Q5.svg

@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   version="1.1"
+   id="svg10"
+   width="2666.6667"
+   height="2666.6667"
+   viewBox="0 0 2666.6667 2666.6667"
+   sodipodi:docname="textura3.svg"
+   inkscape:version="1.0.1 (3bc2e813f5, 2020-09-07)">
+  <sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1663"
+     inkscape:window-height="1280"
+     id="namedview64"
+     showgrid="false"
+     inkscape:zoom="0.37799999"
+     inkscape:cx="846.56087"
+     inkscape:cy="1333.3334"
+     inkscape:window-x="0"
+     inkscape:window-y="0"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg10" />
+  <metadata
+     id="metadata16">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs14" />
+  <g
+     id="g18"
+     transform="matrix(0.9,0,0,0.9,133.51373,249.58775)">
+    <path
+       style="fill:#ffffff;stroke-width:1.33333"
+       d="m 736.00001,2399.1318 c -2.56667,-0.255 -7.866,-0.8132 -11.77631,-1.2407 l -7.10964,-0.7771 -2.45808,-2.458 -2.45806,-2.4581 0.74568,-2.8515 c 0.41012,-1.5682 2.06538,-3.7161 3.67838,-4.773 5.97655,-3.916 29.43186,-8.602 62.71136,-12.5287 17.2392,-2.034 62.35572,-6.5152 73.4462,-7.2949 5.19542,-0.3654 10.29542,-0.9624 11.33334,-1.3268 1.03792,-0.3644 12.08713,-1.5918 24.5538,-2.7275 12.46666,-1.1359 28.06666,-2.6515 34.66666,-3.3681 48.09681,-5.2226 69.69526,-8.0527 79.33336,-10.3952 3.3,-0.8022 8.2667,-1.8203 11.037,-2.2627 l 5.0371,-0.8043 -0.7824,-1.2658 -0.7824,-1.266 -15.588,0.013 c -23.31789,0.019 -70.35022,2.6089 -108.92132,6.0001 -3.66667,0.3224 -17.16667,1.4792 -30,2.5706 -21.27866,1.8097 -43.15159,3.7517 -83.33334,7.399 -34.85161,3.1635 -79.97028,4.9459 -87.83801,3.4699 l -4.95137,-0.9289 -1.468,-3.2219 -1.468,-3.222 1.71304,-2.064 c 4.85429,-5.8491 24.06004,-9.9324 75.34568,-16.0193 15.4,-1.8278 30.23033,-3.6284 32.95629,-4.0015 2.72596,-0.3731 19.52596,-2.1564 37.33333,-3.9629 17.80738,-1.8067 38.37704,-3.8956 45.71038,-4.6424 7.33333,-0.7467 16.03333,-1.6248 19.33333,-1.9512 8.07387,-0.7988 39.46086,-4.415 52.66667,-6.0679 5.86667,-0.7343 13.36667,-1.6183 16.66667,-1.9644 3.3,-0.346 7.8,-1.1585 10,-1.8053 l 4,-1.1763 -10,-0.93 c -12.61362,-1.1731 -28.08191,-1.7216 -99.2397,-3.5196 -31.48184,-0.7955 -57.80041,-1.7929 -58.48571,-2.2164 -0.6853,-0.4236 -0.94528,-3.0123 -0.57772,-5.7527 l 0.66831,-4.9825 -15.79221,-17.178 -15.7922,-17.1779 -0.84714,-4.2001 c -0.46592,-2.3101 -0.63337,-5.3101 -0.37212,-6.6667 l 0.475,-2.4665 h 37.31508 37.31507 l 0.3892,4 0.3892,4 -9.72253,12.0119 c -9.74695,12.042 -11.91019,14.6634 -18.72254,22.6878 -2.01666,2.3755 -3.66666,4.8976 -3.66666,5.605 v 1.2858 l 41.66666,0.9088 c 95.33237,2.0795 125.93701,4.9306 134.66667,12.5454 7.79209,6.7969 -5.58553,12.1109 -39.50324,15.6918 -2.28988,0.2418 -14.66342,1.7086 -27.49676,3.2594 -12.83333,1.5509 -29.03333,3.3506 -36,3.9994 -31.76296,2.9579 -44.92221,4.3278 -76.66667,7.981 -13.2,1.519 -29.7,3.3545 -36.66666,4.0786 -16.44847,1.7099 -42.86454,5.0524 -51.33334,6.4955 l -6.66666,1.136 6.66666,0.1481 c 3.66667,0.081 17.16667,-0.7234 30,-1.7886 43.52271,-3.6127 71.28839,-5.9928 86,-7.3723 8.06667,-0.7564 22.46667,-1.9645 32,-2.6848 9.53334,-0.7204 23.93334,-1.906 32,-2.6349 30.18418,-2.7274 59.43375,-4.1036 84.00001,-3.9524 l 25.33335,0.1561 5.2,1.7995 c 5.7288,1.9825 7.4155,3.8428 7.4462,8.2128 l 0.02,2.9032 -3.5434,2.7873 c -3.3191,2.6108 -13.0262,6.0524 -21.3054,7.5537 -1.997,0.3622 -4.1252,0.9639 -4.7294,1.3372 -0.6041,0.3734 -5.14611,1.1726 -10.09339,1.7759 -4.94727,0.6035 -18.29504,2.3424 -29.66171,3.8645 -22.38103,2.9971 -63.94175,7.5912 -80,8.8432 -5.5,0.4288 -11.8,1.0671 -14,1.4184 -2.2,0.3514 -10.3,1.2099 -18,1.908 -31.13576,2.8227 -68.66898,6.9366 -91.82078,10.064 -13.46809,1.8195 -25.01809,3.308 -25.66666,3.308 -0.64858,0 -1.17923,0.6766 -1.17923,1.5036 v 1.5035 L 826,2390.4342 918.66666,2389.86 v 2.2407 c 0,1.2324 -0.8093,2.9124 -1.79846,3.7333 l -1.79846,1.4926 -24.73036,1.2885 C 867.60932,2399.7995 746.79009,2400.205 736,2399.133 Z m 305.33329,-176.4304 v -85.368 H 1128 h 86.6667 v 18.588 18.588 l -1.6667,1.0309 c -0.9167,0.5671 -30.4667,1.3525 -65.6667,1.7455 l -64,0.7142 -0.3852,11.6667 -0.3852,11.6667 h 38.7515 38.7516 l 1.3388,3.5212 1.3387,3.5212 -0.3717,16.8121 L 1162,2242 l -39.643,0.3532 -39.643,0.3531 -0.357,32.3136 -0.357,32.3135 -20.3333,0.368 -20.3334,0.3681 z m 194.2223,84.4097 c -0.4889,-0.4888 -0.8889,-38.8888 -0.8889,-85.3333 v -84.4444 h 21.9873 21.9873 l 0.346,65 0.346,65 47.7772,0.2216 c 26.2774,0.1213 48.0221,0.4665 48.3214,0.7658 0.4371,0.437 0.9681,31.51 0.6497,38.0126 l -0.081,1.6666 h -69.7778 c -38.3778,0 -70.1778,-0.4 -70.6667,-0.8889 z m 162.076,-19.1883 0.3684,-20.1889 86.1972,0.1519 86.1971,0.1518 3.3388,-1.2694 3.3389,-1.2695 1.569,-4.7539 1.5689,-4.754 -0.92,-4.3288 c -0.506,-2.3808 -1.8461,-5.3786 -2.9783,-6.662 l -2.0582,-2.3333 h -62.8891 -62.8892 l -6.5709,-2.1996 c -15.4386,-5.1681 -27.9792,-17.8657 -33.1803,-33.5957 l -2.3571,-7.1288 0.5942,-12.8712 0.594,-12.8714 3.3722,-7.3333 c 4.5178,-9.8237 12.926,-19.0048 22.5955,-24.6719 l 7.9536,-4.6614 H 1504.7382 1568 v 20 20 h -56.4118 -56.4118 l -2.429,1.7761 -2.4291,1.7763 -0.66,6.8688 -0.66,6.8688 2.1591,3.2952 2.159,3.2952 64.3419,0.4596 64.3417,0.4596 5.8783,2.3332 c 16.996,6.746 27.3629,17.498 32.5748,33.7844 l 2.2136,6.9172 v 10.1656 10.1656 l -2.1992,6.9172 c -1.2095,3.8044 -3.0095,7.8644 -4,9.0221 -0.9904,1.1577 -1.8008,2.7792 -1.8008,3.6032 0,2.9703 -13.3643,14.7779 -20.9323,18.494 l -7.7344,3.7979 -94.3684,0.3892 -94.3682,0.3892 z m 272.9692,18.2612 c -14.5482,-3.9236 -29.0184,-18.8126 -33.8889,-34.8697 l -2.0164,-6.6476 -0.015,-63.6997 -0.015,-63.6996 21.6666,0.3662 21.6667,0.3664 0.3463,62.8475 0.3462,62.8475 2.19,1.8192 2.1899,1.8192 47.4639,0.4162 c 26.105,0.2291 50.0176,0.041 53.139,-0.4162 l 5.6754,-0.8327 1.9913,-3.8508 1.9913,-3.8508 v -19.3995 c 0,-10.6698 0.45,-19.3945 1,-19.3884 0.9072,0.013 26.9279,2Line truncated
+       id="path22" />
+  </g>
+</svg>

resources/profiles/FLSun/QQSP.svg

@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   version="1.1"
+   id="svg10"
+   width="2666.6667"
+   height="2666.6667"
+   viewBox="0 0 2666.6667 2666.6667"
+   sodipodi:docname="textura3.svg"
+   inkscape:version="1.0.1 (3bc2e813f5, 2020-09-07)">
+  <sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1663"
+     inkscape:window-height="1280"
+     id="namedview64"
+     showgrid="false"
+     inkscape:zoom="0.37799999"
+     inkscape:cx="846.56087"
+     inkscape:cy="1333.3334"
+     inkscape:window-x="0"
+     inkscape:window-y="0"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg10" />
+  <metadata
+     id="metadata16">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs14" />
+  <g
+     id="g18"
+     transform="matrix(0.9,0,0,0.9,133.51373,249.58775)">
+    <path
+       style="fill:#ffffff;stroke-width:1.33333"
+       d="m 736.00001,2399.1318 c -2.56667,-0.255 -7.866,-0.8132 -11.77631,-1.2407 l -7.10964,-0.7771 -2.45808,-2.458 -2.45806,-2.4581 0.74568,-2.8515 c 0.41012,-1.5682 2.06538,-3.7161 3.67838,-4.773 5.97655,-3.916 29.43186,-8.602 62.71136,-12.5287 17.2392,-2.034 62.35572,-6.5152 73.4462,-7.2949 5.19542,-0.3654 10.29542,-0.9624 11.33334,-1.3268 1.03792,-0.3644 12.08713,-1.5918 24.5538,-2.7275 12.46666,-1.1359 28.06666,-2.6515 34.66666,-3.3681 48.09681,-5.2226 69.69526,-8.0527 79.33336,-10.3952 3.3,-0.8022 8.2667,-1.8203 11.037,-2.2627 l 5.0371,-0.8043 -0.7824,-1.2658 -0.7824,-1.266 -15.588,0.013 c -23.31789,0.019 -70.35022,2.6089 -108.92132,6.0001 -3.66667,0.3224 -17.16667,1.4792 -30,2.5706 -21.27866,1.8097 -43.15159,3.7517 -83.33334,7.399 -34.85161,3.1635 -79.97028,4.9459 -87.83801,3.4699 l -4.95137,-0.9289 -1.468,-3.2219 -1.468,-3.222 1.71304,-2.064 c 4.85429,-5.8491 24.06004,-9.9324 75.34568,-16.0193 15.4,-1.8278 30.23033,-3.6284 32.95629,-4.0015 2.72596,-0.3731 19.52596,-2.1564 37.33333,-3.9629 17.80738,-1.8067 38.37704,-3.8956 45.71038,-4.6424 7.33333,-0.7467 16.03333,-1.6248 19.33333,-1.9512 8.07387,-0.7988 39.46086,-4.415 52.66667,-6.0679 5.86667,-0.7343 13.36667,-1.6183 16.66667,-1.9644 3.3,-0.346 7.8,-1.1585 10,-1.8053 l 4,-1.1763 -10,-0.93 c -12.61362,-1.1731 -28.08191,-1.7216 -99.2397,-3.5196 -31.48184,-0.7955 -57.80041,-1.7929 -58.48571,-2.2164 -0.6853,-0.4236 -0.94528,-3.0123 -0.57772,-5.7527 l 0.66831,-4.9825 -15.79221,-17.178 -15.7922,-17.1779 -0.84714,-4.2001 c -0.46592,-2.3101 -0.63337,-5.3101 -0.37212,-6.6667 l 0.475,-2.4665 h 37.31508 37.31507 l 0.3892,4 0.3892,4 -9.72253,12.0119 c -9.74695,12.042 -11.91019,14.6634 -18.72254,22.6878 -2.01666,2.3755 -3.66666,4.8976 -3.66666,5.605 v 1.2858 l 41.66666,0.9088 c 95.33237,2.0795 125.93701,4.9306 134.66667,12.5454 7.79209,6.7969 -5.58553,12.1109 -39.50324,15.6918 -2.28988,0.2418 -14.66342,1.7086 -27.49676,3.2594 -12.83333,1.5509 -29.03333,3.3506 -36,3.9994 -31.76296,2.9579 -44.92221,4.3278 -76.66667,7.981 -13.2,1.519 -29.7,3.3545 -36.66666,4.0786 -16.44847,1.7099 -42.86454,5.0524 -51.33334,6.4955 l -6.66666,1.136 6.66666,0.1481 c 3.66667,0.081 17.16667,-0.7234 30,-1.7886 43.52271,-3.6127 71.28839,-5.9928 86,-7.3723 8.06667,-0.7564 22.46667,-1.9645 32,-2.6848 9.53334,-0.7204 23.93334,-1.906 32,-2.6349 30.18418,-2.7274 59.43375,-4.1036 84.00001,-3.9524 l 25.33335,0.1561 5.2,1.7995 c 5.7288,1.9825 7.4155,3.8428 7.4462,8.2128 l 0.02,2.9032 -3.5434,2.7873 c -3.3191,2.6108 -13.0262,6.0524 -21.3054,7.5537 -1.997,0.3622 -4.1252,0.9639 -4.7294,1.3372 -0.6041,0.3734 -5.14611,1.1726 -10.09339,1.7759 -4.94727,0.6035 -18.29504,2.3424 -29.66171,3.8645 -22.38103,2.9971 -63.94175,7.5912 -80,8.8432 -5.5,0.4288 -11.8,1.0671 -14,1.4184 -2.2,0.3514 -10.3,1.2099 -18,1.908 -31.13576,2.8227 -68.66898,6.9366 -91.82078,10.064 -13.46809,1.8195 -25.01809,3.308 -25.66666,3.308 -0.64858,0 -1.17923,0.6766 -1.17923,1.5036 v 1.5035 L 826,2390.4342 918.66666,2389.86 v 2.2407 c 0,1.2324 -0.8093,2.9124 -1.79846,3.7333 l -1.79846,1.4926 -24.73036,1.2885 C 867.60932,2399.7995 746.79009,2400.205 736,2399.133 Z m 305.33329,-176.4304 v -85.368 H 1128 h 86.6667 v 18.588 18.588 l -1.6667,1.0309 c -0.9167,0.5671 -30.4667,1.3525 -65.6667,1.7455 l -64,0.7142 -0.3852,11.6667 -0.3852,11.6667 h 38.7515 38.7516 l 1.3388,3.5212 1.3387,3.5212 -0.3717,16.8121 L 1162,2242 l -39.643,0.3532 -39.643,0.3531 -0.357,32.3136 -0.357,32.3135 -20.3333,0.368 -20.3334,0.3681 z m 194.2223,84.4097 c -0.4889,-0.4888 -0.8889,-38.8888 -0.8889,-85.3333 v -84.4444 h 21.9873 21.9873 l 0.346,65 0.346,65 47.7772,0.2216 c 26.2774,0.1213 48.0221,0.4665 48.3214,0.7658 0.4371,0.437 0.9681,31.51 0.6497,38.0126 l -0.081,1.6666 h -69.7778 c -38.3778,0 -70.1778,-0.4 -70.6667,-0.8889 z m 162.076,-19.1883 0.3684,-20.1889 86.1972,0.1519 86.1971,0.1518 3.3388,-1.2694 3.3389,-1.2695 1.569,-4.7539 1.5689,-4.754 -0.92,-4.3288 c -0.506,-2.3808 -1.8461,-5.3786 -2.9783,-6.662 l -2.0582,-2.3333 h -62.8891 -62.8892 l -6.5709,-2.1996 c -15.4386,-5.1681 -27.9792,-17.8657 -33.1803,-33.5957 l -2.3571,-7.1288 0.5942,-12.8712 0.594,-12.8714 3.3722,-7.3333 c 4.5178,-9.8237 12.926,-19.0048 22.5955,-24.6719 l 7.9536,-4.6614 H 1504.7382 1568 v 20 20 h -56.4118 -56.4118 l -2.429,1.7761 -2.4291,1.7763 -0.66,6.8688 -0.66,6.8688 2.1591,3.2952 2.159,3.2952 64.3419,0.4596 64.3417,0.4596 5.8783,2.3332 c 16.996,6.746 27.3629,17.498 32.5748,33.7844 l 2.2136,6.9172 v 10.1656 10.1656 l -2.1992,6.9172 c -1.2095,3.8044 -3.0095,7.8644 -4,9.0221 -0.9904,1.1577 -1.8008,2.7792 -1.8008,3.6032 0,2.9703 -13.3643,14.7779 -20.9323,18.494 l -7.7344,3.7979 -94.3684,0.3892 -94.3682,0.3892 z m 272.9692,18.2612 c -14.5482,-3.9236 -29.0184,-18.8126 -33.8889,-34.8697 l -2.0164,-6.6476 -0.015,-63.6997 -0.015,-63.6996 21.6666,0.3662 21.6667,0.3664 0.3463,62.8475 0.3462,62.8475 2.19,1.8192 2.1899,1.8192 47.4639,0.4162 c 26.105,0.2291 50.0176,0.041 53.139,-0.4162 l 5.6754,-0.8327 1.9913,-3.8508 1.9913,-3.8508 v -19.3995 c 0,-10.6698 0.45,-19.3945 1,-19.3884 0.9072,0.013 26.9279,2Line truncated
+       id="path22" />
+  </g>
+</svg>

resources/profiles/LulzBot.idx

@@ -1,2 +1,4 @@
+min_slic3r_version = 2.3.0-beta2
+0.0.2 Removed obsolete host keys
 min_slic3r_version = 2.2.0-alpha3
 0.0.1 Initial version

resources/profiles/LulzBot.ini

@@ -3,7 +3,7 @@
 [vendor]
 # Vendor name will be shown by the Config Wizard.
 name = LulzBot
-config_version = 0.0.1
+config_version = 0.0.2
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
 
 [printer_model:MINI_AERO]
@@ -257,7 +257,6 @@ extruder_colour = ""
 extruder_offset = 0x0
 gcode_flavor = marlin
 high_current_on_filament_swap = 0
-host_type = octoprint
 inherits = 
 layer_gcode = 
 machine_max_acceleration_e = 10000,5000
@@ -281,10 +280,7 @@ max_print_height = 158
 min_layer_height = 0.07
 nozzle_diameter = 0.5
 parking_pos_retraction = 92
-print_host = 
 printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
-printhost_apikey = 
-printhost_cafile = 
 remaining_times = 0
 retract_before_travel = 2
 retract_before_wipe = 0%
@@ -297,8 +293,6 @@ retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
-serial_port = 
-serial_speed = 250000
 silent_mode = 0
 single_extruder_multi_material = 0
 start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29       ; start auto-leveling sequence\nM420 S1   ; enable leveling matrix\nM425 Z    ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
@@ -328,7 +322,6 @@ extruder_colour = ""
 extruder_offset = 0x0
 gcode_flavor = marlin
 high_current_on_filament_swap = 0
-host_type = octoprint
 inherits = 
 layer_gcode = 
 machine_max_acceleration_e = 1000,5000
@@ -352,11 +345,8 @@ max_print_height = 250
 min_layer_height = 0.07
 nozzle_diameter = 0.5
 parking_pos_retraction = 92
-print_host = 
 printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
 printer_technology = FFF
-printhost_apikey = 
-printhost_cafile = 
 remaining_times = 0
 retract_before_travel = 2
 retract_before_wipe = 0%
@@ -369,8 +359,6 @@ retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
-serial_port = 
-serial_speed = 250000
 silent_mode = 0
 single_extruder_multi_material = 0
 start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29          ; start auto-leveling sequence\nM420 S1      ; enable leveling matrix\nM425 Z       ; use measured Z backlash for compensation\nM425 Z F0    ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n

resources/profiles/PrusaResearch.idx

@@ -1,4 +1,17 @@
+min_slic3r_version = 2.3.0-rc1
+1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. 
+1.2.1 Updated FW version for MK2.5 family printers.
+1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
+min_slic3r_version = 2.3.0-beta2
+1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
+min_slic3r_version = 2.3.0-beta0
+1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights. 
+min_slic3r_version = 2.3.0-alpha4
+1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
+1.2.0-alpha0 Added filament spool weights
 min_slic3r_version = 2.2.0-alpha3
+1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. 
+1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
 1.1.10 Updated firmware version.
 1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
 1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.

resources/profiles/TriLAB.idx

@@ -1,3 +1,8 @@
+min_slic3r_version = 2.3.0-alpha3
+0.0.6 Added material TPU 93A (SMARTFIL)
+0.0.5 Removed obsolete host keys.
+0.0.4 Added PLA, PETG profiles for 0.8 nozzle, update print materials
+0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
 min_slic3r_version = 2.3.0-alpha0
 0.0.2 Added 0.15mm print profile
 0.0.1 Initial TriLAB bundle

resources/shaders/gouraud.fs

@@ -16,8 +16,10 @@ struct SlopeDetection
 uniform vec4 uniform_color;
 uniform SlopeDetection slope;
 
-uniform sampler2D environment_tex;
-uniform bool use_environment_tex;
+#ifdef ENABLE_ENVIRONMENT_MAP
+    uniform sampler2D environment_tex;
+    uniform bool use_environment_tex;
+#endif // ENABLE_ENVIRONMENT_MAP
 
 varying vec3 clipping_planes_dots;
 
@@ -42,8 +44,10 @@ void main()
 	vec3 color = slope.actived ? slope_color() : uniform_color.rgb;
     // if the fragment is outside the print volume -> use darker color
 	color = (any(lessThan(delta_box_min, ZERO)) || any(greaterThan(delta_box_max, ZERO))) ? mix(color, ZERO, 0.3333) : color;
+#ifdef ENABLE_ENVIRONMENT_MAP
     if (use_environment_tex)
         gl_FragColor = vec4(0.45 * texture2D(environment_tex, normalize(eye_normal).xy * 0.5 + 0.5).xyz + 0.8 * color * intensity.x, uniform_color.a);
     else
+#endif
         gl_FragColor = vec4(vec3(intensity.y) + color * intensity.x, uniform_color.a);
 }

resources/shaders/options_110.vs

@@ -1,11 +1,22 @@
 #version 110
 
+uniform bool use_fixed_screen_size;
 uniform float zoom;
 uniform float point_size;
 uniform float near_plane_height;
 
+float fixed_screen_size()
+{
+    return point_size;
+}
+
+float fixed_world_size()
+{
+    return (gl_Position.w == 1.0) ? zoom * near_plane_height * point_size : near_plane_height * point_size / gl_Position.w;
+}
+
 void main()
 {
     gl_Position = ftransform();
-    gl_PointSize = (gl_Position.w == 1.0) ? zoom * near_plane_height * point_size : near_plane_height * point_size / gl_Position.w;
+    gl_PointSize = use_fixed_screen_size ? fixed_screen_size() : fixed_world_size();
 }

resources/shaders/options_120.vs

@@ -1,11 +1,22 @@
 #version 120
 
+uniform bool use_fixed_screen_size;
 uniform float zoom;
 uniform float point_size;
 uniform float near_plane_height;
 
+float fixed_screen_size()
+{
+    return point_size;
+}
+
+float fixed_world_size()
+{
+    return (gl_Position.w == 1.0) ? zoom * near_plane_height * point_size : near_plane_height * point_size / gl_Position.w;
+}
+
 void main()
 {
     gl_Position = ftransform();
-    gl_PointSize = (gl_Position.w == 1.0) ? zoom * near_plane_height * point_size : near_plane_height * point_size / gl_Position.w;
+    gl_PointSize = use_fixed_screen_size ? fixed_screen_size() : fixed_world_size();
 }

src/CMakeLists.txt

@@ -249,5 +249,5 @@ else ()
     install(TARGETS PrusaSlicer RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}")
 
     # Install the symlink for gcodeviewer
-    install(CODE "execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink prusa-slicer prusa-gcodeviewer WORKING_DIRECTORY ${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_BINDIR})")
+    install(CODE "execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink prusa-slicer prusa-gcodeviewer WORKING_DIRECTORY \$ENV{DESTDIR}/${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_BINDIR})")
 endif ()

src/PrusaSlicer.cpp

@@ -28,12 +28,14 @@
 #include <boost/nowide/cenv.hpp>
 #include <boost/nowide/iostream.hpp>
 #include <boost/nowide/integration/filesystem.hpp>
+#include <boost/dll/runtime_symbol_info.hpp>
 
 #include "unix/fhs.hpp"  // Generated by CMake from ../platform/unix/fhs.hpp.in
 
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Config.hpp"
 #include "libslic3r/Geometry.hpp"
+#include "libslic3r/GCode/PostProcessor.hpp"
 #include "libslic3r/Model.hpp"
 #include "libslic3r/ModelArrange.hpp"
 #include "libslic3r/Print.hpp"
@@ -138,7 +140,6 @@ int CLI::run(int argc, char **argv)
         m_print_config.apply(config);
     }
 
-#if ENABLE_GCODE_VIEWER
     // are we starting as gcodeviewer ?
     for (auto it = m_actions.begin(); it != m_actions.end(); ++it) {
         if (*it == "gcodeviewer") {
@@ -148,21 +149,14 @@ int CLI::run(int argc, char **argv)
             break;
         }
     }
-#endif // ENABLE_GCODE_VIEWER
 
     // Read input file(s) if any.
-#if ENABLE_GCODE_VIEWER
-    for (const std::string& file : m_input_files) {
-        std::string ext = boost::filesystem::path(file).extension().string();
-        if (ext == ".gcode" || ext == ".g") {
-            if (boost::filesystem::exists(file)) {
-                start_as_gcodeviewer = true;
-                break;
-            }
+    for (const std::string& file : m_input_files)
+        if (is_gcode_file(file) && boost::filesystem::exists(file)) {
+            start_as_gcodeviewer = true;
+            break;
         }
-    }
     if (!start_as_gcodeviewer) {
-#endif // ENABLE_GCODE_VIEWER
         for (const std::string& file : m_input_files) {
             if (!boost::filesystem::exists(file)) {
                 boost::nowide::cerr << "No such file: " << file << std::endl;
@@ -195,9 +189,7 @@ int CLI::run(int argc, char **argv)
             }
             m_models.push_back(model);
         }
-#if ENABLE_GCODE_VIEWER
     }
-#endif // ENABLE_GCODE_VIEWER
 
     // Apply command line options to a more specific DynamicPrintConfig which provides normalize()
     // (command line options override --load files)
@@ -489,6 +481,12 @@ int CLI::run(int argc, char **argv)
                 if (printer_technology == ptFFF) {
                     for (auto* mo : model.objects)
                         fff_print.auto_assign_extruders(mo);
+                } else {
+                    // The default for "output_filename_format" is good for FDM: "[input_filename_base].gcode"
+                    // Replace it with a reasonable SLA default.
+                    std::string &format = m_print_config.opt_string("output_filename_format", true);
+                    if (format == static_cast<const ConfigOptionString*>(m_print_config.def()->get("output_filename_format")->default_value.get())->value)
+                        format = "[input_filename_base].SL1";
                 }
                 print->apply(model, m_print_config);
                 std::string err = print->validate();
@@ -504,11 +502,7 @@ int CLI::run(int argc, char **argv)
                         print->process();
                         if (printer_technology == ptFFF) {
                             // The outfile is processed by a PlaceholderParser.
-#if ENABLE_GCODE_VIEWER
                             outfile = fff_print.export_gcode(outfile, nullptr, nullptr);
-#else
-                            outfile = fff_print.export_gcode(outfile, nullptr);
-#endif // ENABLE_GCODE_VIEWER
                             outfile_final = fff_print.print_statistics().finalize_output_path(outfile);
                         } else {
                             outfile = sla_print.output_filepath(outfile);
@@ -523,6 +517,8 @@ int CLI::run(int argc, char **argv)
                             }
                             outfile = outfile_final;
                         }
+                        // Run the post-processing scripts if defined.
+                        run_post_process_scripts(outfile, fff_print.full_print_config());
                         boost::nowide::cout << "Slicing result exported to " << outfile << std::endl;
                     } catch (const std::exception &ex) {
                         boost::nowide::cerr << ex.what() << std::endl;
@@ -559,11 +555,6 @@ int CLI::run(int argc, char **argv)
                     << " (" << print.total_extruded_volume()/1000 << "cm3)" << std::endl;
 */
             }
-#if !ENABLE_GCODE_VIEWER
-        } else if (opt_key == "gcodeviewer") {
-            start_gui = true;
-        	start_as_gcodeviewer = true;
-#endif // !ENABLE_GCODE_VIEWER
         } else {
             boost::nowide::cerr << "error: option not supported yet: " << opt_key << std::endl;
             return 1;
@@ -604,7 +595,9 @@ bool CLI::setup(int argc, char **argv)
         }
     }
 
-    boost::filesystem::path path_to_binary = boost::filesystem::system_complete(argv[0]);
+    // See Invoking prusa-slicer from $PATH environment variable crashes #5542
+    // boost::filesystem::path path_to_binary = boost::filesystem::system_complete(argv[0]);
+    boost::filesystem::path path_to_binary = boost::dll::program_location();
 
     // Path from the Slic3r binary to its resources.
 #ifdef __APPLE__

src/imgui/README.md

@@ -8,3 +8,5 @@ Customized with the following commits:
 042880ba2df913916b2cc77f7bb677e07bfd2c58
 67c55c74901f1d337ef08f2090a87cfb4263bb0f
 a94c952b40d36b1505fb77b87c0dd739e1034659
+3ca3a544a87cc569b69351a77996c287763388a5
+6586a46ea23e86d54d228c55c63ca55680d25d56

src/imgui/imconfig.h

@@ -113,14 +113,16 @@ namespace ImGui
     const char PrinterSlaIconMarker    = 0x6; 
     const char FilamentIconMarker      = 0x7; 
     const char MaterialIconMarker      = 0x8;
-	const char CloseIconMarker         = 0xB;
-	const char CloseIconHoverMarker    = 0xC;
+	const char CloseNotifButton        = 0xB;
+	const char CloseNotifHoverButton   = 0xC;
 //	const char TimerDotMarker          = 0xE;
 //	const char TimerDotEmptyMarker     = 0xF;
-    const char MinimalizeMarker        = 0xE;
-    const char MinimalizeHoverMarker   = 0xF;
+    const char MinimalizeButton        = 0xE;
+    const char MinimalizeHoverButton   = 0xF;
 	const char WarningMarker           = 0x10;
 	const char ErrorMarker             = 0x11;
+    const char EjectButton             = 0x12;
+    const char EjectHoverButton        = 0x13;
 //    void MyFunction(const char* name, const MyMatrix44& v);
 
 }

src/libnest2d/include/libnest2d/nester.hpp

@@ -741,6 +741,10 @@ public:
         return impl_.getResult();
     }
 
+    inline int lastPackedBinId() const {
+        return impl_.lastPackedBinId();
+    }
+
     void clear() { impl_.clear(); }
 };
 
@@ -862,6 +866,10 @@ public:
     {
         return selector_.getResult();
     }
+
+    inline int lastPackedBinId() const {
+        return selector_.lastPackedBinId();
+    }
 };
 
 }

src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -167,6 +167,8 @@ struct NfpPConfig {
                        const ItemGroup&              // remaining items
                        )> before_packing;
 
+    std::function<void(const ItemGroup &, NfpPConfig &config)> on_preload;
+
     NfpPConfig(): rotations({0.0, Pi/2.0, Pi, 3*Pi/2}),
         alignment(Alignment::CENTER), starting_point(Alignment::CENTER) {}
 };
@@ -479,13 +481,18 @@ class _NofitPolyPlacer: public PlacerBoilerplate<_NofitPolyPlacer<RawShape, TBin
 
     using MaxNfpLevel = nfp::MaxNfpLevel<RawShape>;
 
-    // Norming factor for the optimization function
-    const double norm_;
-
 public:
 
     using Pile = nfp::Shapes<RawShape>;
 
+private:
+
+    // Norming factor for the optimization function
+    const double norm_;
+    Pile merged_pile_;
+
+public:
+
     inline explicit _NofitPolyPlacer(const BinType& bin):
         Base(bin),
         norm_(std::sqrt(sl::area(bin)))
@@ -572,6 +579,12 @@ public:
         Base::clearItems();
     }
 
+    void preload(const ItemGroup& packeditems) {
+        Base::preload(packeditems);
+        if (config_.on_preload)
+            config_.on_preload(packeditems, config_);
+    }
+
 private:
 
     using Shapes = TMultiShape<RawShape>;
@@ -616,135 +629,9 @@ private:
     template<class Level>
     Shapes calcnfp(const Item &trsh, Level)
     { // Function for arbitrary level of nfp implementation
-        using namespace nfp;
 
-        Shapes nfps;
-
-        auto& orb = trsh.transformedShape();
-        bool orbconvex = trsh.isContourConvex();
-
-        for(Item& sh : items_) {
-            nfp::NfpResult<RawShape> subnfp;
-            auto& stat = sh.transformedShape();
-
-            if(sh.isContourConvex() && orbconvex)
-                subnfp = nfp::noFitPolygon<NfpLevel::CONVEX_ONLY>(stat, orb);
-            else if(orbconvex)
-                subnfp = nfp::noFitPolygon<NfpLevel::ONE_CONVEX>(stat, orb);
-            else
-                subnfp = nfp::noFitPolygon<Level::value>(stat, orb);
-
-            correctNfpPosition(subnfp, sh, trsh);
-
-            nfps = nfp::merge(nfps, subnfp.first);
-        }
-
-        return nfps;
-    }
-
-    // Very much experimental
-    void repack(Item& item, PackResult& result) {
-
-        if((sl::area(bin_) - this->filledArea()) >= item.area()) {
-            auto prev_func = config_.object_function;
-
-            unsigned iter = 0;
-            ItemGroup backup_rf = items_;
-            std::vector<Item> backup_cpy;
-            for(Item& itm : items_) backup_cpy.emplace_back(itm);
-
-            auto ofn = [this, &item, &result, &iter, &backup_cpy, &backup_rf]
-                    (double ratio)
-            {
-                auto& bin = bin_;
-                iter++;
-                config_.object_function = [bin, ratio](
-                        nfp::Shapes<RawShape>& pile,
-                        const Item& item,
-                        const ItemGroup& /*remaining*/)
-                {
-                    pile.emplace_back(item.transformedShape());
-                    auto ch = sl::convexHull(pile);
-                    auto pbb = sl::boundingBox(pile);
-                    pile.pop_back();
-
-                    double parea = 0.5*(sl::area(ch) + sl::area(pbb));
-
-                    double pile_area = std::accumulate(
-                                pile.begin(), pile.end(), item.area(),
-                                [](double sum, const RawShape& sh){
-                        return sum + sl::area(sh);
-                    });
-
-                    // The pack ratio -- how much is the convex hull occupied
-                    double pack_rate = (pile_area)/parea;
-
-                    // ratio of waste
-                    double waste = 1.0 - pack_rate;
-
-                    // Score is the square root of waste. This will extend the
-                    // range of good (lower) values and shrink the range of bad
-                    // (larger) values.
-                    auto wscore = std::sqrt(waste);
-
-
-                    auto ibb = item.boundingBox();
-                    auto bbb = sl::boundingBox(bin);
-                    auto c = ibb.center();
-                    double norm = 0.5*pl::distance(bbb.minCorner(),
-                                                   bbb.maxCorner());
-
-                    double dscore = pl::distance(c, pbb.center()) / norm;
-
-                    return ratio*wscore + (1.0 - ratio) * dscore;
-                };
-
-                auto bb = sl::boundingBox(bin);
-                double norm = bb.width() + bb.height();
-
-                auto items = items_;
-                clearItems();
-                auto it = items.begin();
-                while(auto pr = _trypack(*it++)) {
-                    this->accept(pr); if(it == items.end()) break;
-                }
-
-                auto count_diff = items.size() - items_.size();
-                double score = count_diff;
-
-                if(count_diff == 0) {
-                    result = _trypack(item);
-
-                    if(result) {
-                        std::cout << "Success" << std::endl;
-                        score = 0.0;
-                    } else {
-                        score += result.overfit() / norm;
-                    }
-                } else {
-                    result = PackResult();
-                    items_ = backup_rf;
-                    for(unsigned i = 0; i < items_.size(); i++) {
-                        items_[i].get() = backup_cpy[i];
-                    }
-                }
-
-                std::cout << iter << " repack result: " << score << " "
-                          << ratio << " " << count_diff << std::endl;
-
-                return score;
-            };
-
-                opt::StopCriteria stopcr;
-                stopcr.max_iterations = 30;
-                stopcr.stop_score = 1e-20;
-                opt::TOptimizer<opt::Method::L_SUBPLEX> solver(stopcr);
-                solver.optimize_min(ofn, opt::initvals(0.5),
-                                    opt::bound(0.0, 1.0));
-
-            // optimize
-            config_.object_function = prev_func;
-        }
+        // TODO: implement
+        return {};
     }
 
     struct Optimum {
@@ -784,19 +671,80 @@ private:
             remlist.insert(remlist.end(), remaining.from, remaining.to);
         }
 
+        double global_score = std::numeric_limits<double>::max();
+
+        auto initial_tr = item.translation();
+        auto initial_rot = item.rotation();
+        Vertex final_tr = {0, 0};
+        Radians final_rot = initial_rot;
+        Shapes nfps;
+
+        auto& bin = bin_;
+        double norm = norm_;
+        auto pbb = sl::boundingBox(merged_pile_);
+        auto binbb = sl::boundingBox(bin);
+
+        // This is the kernel part of the object function that is
+        // customizable by the library client
+        std::function<double(const Item&)> _objfunc;
+        if(config_.object_function) _objfunc = config_.object_function;
+        else {
+
+            // Inside check has to be strict if no alignment was enabled
+            std::function<double(const Box&)> ins_check;
+            if(config_.alignment == Config::Alignment::DONT_ALIGN)
+                ins_check = [&binbb, norm](const Box& fullbb) {
+                    double ret = 0;
+                    if(!sl::isInside(fullbb, binbb))
+                        ret += norm;
+                    return ret;
+                };
+            else
+                ins_check = [&bin](const Box& fullbb) {
+                    double miss = overfit(fullbb, bin);
+                    miss = miss > 0? miss : 0;
+                    return std::pow(miss, 2);
+                };
+
+            _objfunc = [norm, binbb, pbb, ins_check](const Item& item)
+            {
+                auto ibb = item.boundingBox();
+                auto fullbb = sl::boundingBox(pbb, ibb);
+
+                double score = pl::distance(ibb.center(),
+                                            binbb.center());
+                score /= norm;
+
+                score += ins_check(fullbb);
+
+                return score;
+            };
+        }
+
         if(items_.empty()) {
             setInitialPosition(item);
+            auto best_tr = item.translation();
+            auto best_rot = item.rotation();
             best_overfit = overfit(item.transformedShape(), bin_);
+
+            for(auto rot : config_.rotations) {
+                item.translation(initial_tr);
+                item.rotation(initial_rot + rot);
+                setInitialPosition(item);
+                double of = 0.;
+                if ((of = overfit(item.transformedShape(), bin_)) < best_overfit) {
+                    best_overfit = of;
+                    best_tr = item.translation();
+                    best_rot = item.rotation();
+                }
+            }
+
             can_pack = best_overfit <= 0;
+            item.rotation(best_rot);
+            item.translation(best_tr);
         } else {
 
-            double global_score = std::numeric_limits<double>::max();
-
-            auto initial_tr = item.translation();
-            auto initial_rot = item.rotation();
-            Vertex final_tr = {0, 0};
-            Radians final_rot = initial_rot;
-            Shapes nfps;
+            Pile merged_pile = merged_pile_;
 
             for(auto rot : config_.rotations) {
 
@@ -822,57 +770,6 @@ private:
                     ecache.back().accuracy(config_.accuracy);
                 }
 
-                Shapes pile;
-                pile.reserve(items_.size()+1);
-                // double pile_area = 0;
-                for(Item& mitem : items_) {
-                    pile.emplace_back(mitem.transformedShape());
-                    // pile_area += mitem.area();
-                }
-
-                auto merged_pile = nfp::merge(pile);
-                auto& bin = bin_;
-                double norm = norm_;
-                auto pbb = sl::boundingBox(merged_pile);
-                auto binbb = sl::boundingBox(bin);
-
-                // This is the kernel part of the object function that is
-                // customizable by the library client
-                std::function<double(const Item&)> _objfunc;
-                if(config_.object_function) _objfunc = config_.object_function;
-                else {
-
-                    // Inside check has to be strict if no alignment was enabled
-                    std::function<double(const Box&)> ins_check;
-                    if(config_.alignment == Config::Alignment::DONT_ALIGN)
-                        ins_check = [&binbb, norm](const Box& fullbb) {
-                            double ret = 0;
-                            if(!sl::isInside(fullbb, binbb))
-                                ret += norm;
-                            return ret;
-                        };
-                    else
-                        ins_check = [&bin](const Box& fullbb) {
-                            double miss = overfit(fullbb, bin);
-                            miss = miss > 0? miss : 0;
-                            return std::pow(miss, 2);
-                        };
-
-                    _objfunc = [norm, binbb, pbb, ins_check](const Item& item)
-                    {
-                        auto ibb = item.boundingBox();
-                        auto fullbb = sl::boundingBox(pbb, ibb);
-
-                        double score = pl::distance(ibb.center(),
-                                                    binbb.center());
-                        score /= norm;
-
-                        score += ins_check(fullbb);
-
-                        return score;
-                    };
-                }
-
                 // Our object function for placement
                 auto rawobjfunc = [_objfunc, iv, startpos]
                         (Vertex v, Item& itm)
@@ -1045,6 +942,7 @@ private:
 
         if(can_pack) {
             ret = PackResult(item);
+            merged_pile_ = nfp::merge(merged_pile_, item.transformedShape());
         } else {
             ret = PackResult(best_overfit);
         }
@@ -1075,10 +973,9 @@ private:
         if(items_.empty() ||
                 config_.alignment == Config::Alignment::DONT_ALIGN) return;
 
-        nfp::Shapes<RawShape> m;
-        m.reserve(items_.size());
-        for(Item& item : items_) m.emplace_back(item.transformedShape());
-        auto&& bb = sl::boundingBox(m);
+        Box bb = items_.front().get().boundingBox();
+        for(Item& item : items_)
+            bb = sl::boundingBox(item.boundingBox(), bb);
 
         Vertex ci, cb;
 

src/libnest2d/include/libnest2d/selections/firstfit.hpp

@@ -71,8 +71,9 @@ public:
         std::sort(store_.begin(), store_.end(), sortfunc);
 
         auto total = last-first;
-        auto makeProgress = [this, &total](Placer& placer, size_t idx) {
-            packed_bins_[idx] = placer.getItems();
+        auto makeProgress = [this, &total](Placer& placer, size_t bin_idx) {
+            packed_bins_[bin_idx] = placer.getItems();
+            this->last_packed_bin_id_ = int(bin_idx);
             this->progress_(static_cast<unsigned>(--total));
         };
 

src/libnest2d/include/libnest2d/selections/selection_boilerplate.hpp

@@ -18,6 +18,8 @@ public:
         return packed_bins_;
     }
 
+    inline int lastPackedBinId() const { return last_packed_bin_id_; }
+
     inline void progressIndicator(ProgressFunction fn) { progress_ = fn; }
 
     inline void stopCondition(StopCondition cond) { stopcond_ = cond; }
@@ -54,6 +56,7 @@ protected:
     PackGroup packed_bins_;
     ProgressFunction progress_ = [](unsigned){};
     StopCondition stopcond_ = [](){ return false; };
+    int last_packed_bin_id_ = -1;
 };
 
 }

src/libslic3r/AABBTreeIndirect.hpp

@@ -726,6 +726,33 @@ inline bool is_any_triangle_in_radius(
     return hit_point.allFinite();
 }
 
+
+// Traverse the tree and return the index of an entity whose bounding box
+// contains a given point. Returns size_t(-1) when the point is outside.
+template<typename TreeType, typename VectorType>
+void get_candidate_idxs(const TreeType& tree, const VectorType& v, std::vector<size_t>& candidates, size_t node_idx = 0)
+{
+    if (tree.empty() || ! tree.node(node_idx).bbox.contains(v))
+        return;
+
+    decltype(tree.node(node_idx)) node = tree.node(node_idx);
+    static_assert(std::is_reference<decltype(node)>::value,
+                  "Nodes shall be addressed by reference.");
+    assert(node.is_valid());
+    assert(node.bbox.contains(v));
+
+    if (! node.is_leaf()) {
+        if (tree.left_child(node_idx).bbox.contains(v))
+            get_candidate_idxs(tree, v, candidates, tree.left_child_idx(node_idx));
+        if (tree.right_child(node_idx).bbox.contains(v))
+            get_candidate_idxs(tree, v, candidates, tree.right_child_idx(node_idx));
+    } else
+        candidates.push_back(node.idx);
+
+    return;
+}
+
+
 } // namespace AABBTreeIndirect
 } // namespace Slic3r