Lukas Matena
167060e470
Added some profilling macros into GCodeTimeEstimator
2018-07-20 16:14:23 +02:00
Enrico Turri
95bd2bb8f9
Faster time estimate for multimaterial
2018-07-20 15:54:11 +02:00
Enrico Turri
4b8e10a05c
Slightly faster time estimation
2018-07-20 12:05:08 +02:00
bubnikv
f7390c7ad6
The acceleration G-codes (M204 Sxxx) emited for Marlin are now
...
clamped by the maximum acceleration when extruding.
The machine envelope values are only set at the time estimator
from the Printer parameters for the Marlin firmware.
2018-07-18 14:00:42 +02:00
bubnikv
9d027a558e
Implemented clamping of the acceleration when extruding for the Marlin
...
firmware, both for the G-code export and the time estimator.
2018-07-18 11:58:02 +02:00
Enrico Turri
08529189c9
Changed time estimator default values
2018-07-17 10:50:15 +02:00
Enrico Turri
75cf4e0947
Generate M73 lines for silent mode only for MK3 printers
2018-07-13 11:32:50 +02:00
Enrico Turri
dc25df7b32
Faster remaining times export
2018-06-28 13:57:28 +02:00
Enrico Turri
7d61b2076f
Faster remaining time calculation
2018-06-28 09:24:07 +02:00
Enrico Turri
9725966f38
Time estimate uses G1 lines containing E parameter for remaining time calculations
2018-06-28 08:52:07 +02:00
Enrico Turri
7ff22b9413
Time estimate emitted to gcode at requested interval
2018-06-27 15:35:47 +02:00
Enrico Turri
4009fdcc18
Finalized format for gcode line containing remaining printing time
2018-06-06 11:00:36 +02:00
Enrico Turri
5a8d1ffdba
Prototype for exporting estimated remaining time into gcode for default and silent mode
2018-05-30 12:08:03 +02:00
Enrico Turri
bf295b9039
Time Estimator and GCode Analyzer - Fixed handling of commands G90, G91, M82 and M83 - Fixes #812
2018-03-29 14:46:11 +02:00
Enrico Turri
29853a3a45
GCodeTimeEstimator - Added move statistics log (for debug purpose)
2018-01-30 13:18:21 +01:00
Enrico Turri
e94491ee8c
GCodeTimeEstimator - Fixed _simulate_st_synchronize()
2018-01-08 13:23:54 +01:00
Enrico Turri
dfcb502ef4
GCodeTimeEstimator - Fixed square roots of negative numbers
2018-01-08 12:17:39 +01:00
bubnikv
fec1fcdca8
Separated the Marlin G-code flavor from the RepRap G-code flavor
...
due to the differences in the M203 code
(RepRap firmware has it in mm/min, Marlin in mm/sec).
This difference is important to the G-code time estimator.
Changed the g-code flavor to Marlin for all Prusa3D bundled profiles.
2018-01-06 18:49:28 +01:00
Enrico Turri
ae0688f351
GCodeTimeEstimator - added processing of commands M221 (Set extrude factor override percentage)
2018-01-05 10:35:04 +01:00
Enrico Turri
69e3ea6581
GCodeTimeEstimator - simulate firmware st_synchronize() for commands G4, G92, M1
2018-01-05 09:46:09 +01:00
Enrico Turri
3f57e20235
GCodeTimeEstimator: refactoring of forward and reverse passes on blocks
2018-01-04 13:00:34 +01:00
bubnikv
011281df86
Fix of the Spiral Vase after the GCodeReader rework.
...
A patch of the GCodeTimeEstimator to avoid crashes. This is not a final fix though.
2018-01-03 21:55:32 +01:00
bubnikv
9d98a27b98
Fix of compilation on OSX and Linux. By the standard, a temporary
...
value cannot be passed to a reference.
2018-01-03 17:57:37 +01:00
bubnikv
b292554fd8
Optimized the GCodeReader.
...
Fixed the profiling build.
2018-01-03 17:29:49 +01:00
bubnikv
0e4ecfaf56
Fix of time estimator (int abs used instead of float abs)
2018-01-02 13:29:40 +01:00
Enrico Turri
b2eb522f55
GCodeTimeEstimator - clean up unused code
2017-12-19 09:29:04 +01:00
Enrico Turri
0fe855cd6d
Time estimate shown in GUI as formatted string / Write to file made by class GCode's private methods
2017-12-14 09:18:28 +01:00
Enrico Turri
20234c94ee
GCodeTimeEstimator - added retract_acceleration, minimum_travel_feedrate members and process of M201 gcode
2017-12-12 13:44:52 +01:00
Enrico Turri
e199d0532c
GCodeTimeEstimator - added process of G92 gcode
2017-12-11 15:15:21 +01:00
Enrico Turri
34a0a2cb5e
GCodeTimeEstimator - added process of M82 and M83 gcodes
2017-12-11 14:03:29 +01:00
Enrico Turri
a0a503e4a8
integration of time estimator into gcode export - save time estimation into gcode file
2017-12-11 09:06:29 +01:00
Enrico Turri
092d271fa2
time estimator wip stage 2
2017-12-08 10:50:36 +01:00
Enrico Turri
bc3d184d7c
time estimator wip
2017-12-06 14:12:10 +01:00
bubnikv
72ae3585e4
Removed a broken Arc Fitting feature.
...
Removed the questionable Pressure Advance feature. It is better to use the Pressure Advance implemented into a firmware.
Added a C++ implementation of GCodeReader and SpiralVase, thanks to @alexrj
Added a C++ implementation of GCodeTimeEstimator, thanks to @lordofhyphens
2017-04-26 14:24:31 +02:00
Lukas Matena
Enrico Turri
bubnikv