iGoX/OrcaSlicer-bambulab
1
0
Fork 0
mirror of https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git synced 2026-09-07 19:33:47 +02:00
Code Issues Packages Projects Releases Wiki Activity
5,209 Commits 4 Branches 1 Tag
b79692c35ef85bb2c616597de54dd90979f3e599
Commit Graph
96 Commits
Author SHA1 Message Date
Lukas Matena abe6e8a783 Bugfix: legacy config options were not properly processed 2018-04-13 13:43:53 +02:00
Lukas Matena 1b4dc685f4 Connected filament_ramming_parameters to respective dialog, other minor changes 2018-03-28 15:37:10 +02:00
Lukas Matena 76b280c64c Removed parameter 'wipe_tower_adhesion', it will always be true 2018-03-19 15:53:49 +01:00
Lukas Matena e41eff9186 Wiping volumes options temporarily added to Print Settings 2018-03-19 15:30:54 +01:00
Lukas Matena 3d6f6530c0 Merge branch 'master' into wipe_tower_improvements 2018-03-16 14:06:23 +01:00
Lukas Matena b556cec42d Got rid of wipe_tower_advanced option 2018-03-16 13:58:58 +01:00
Lukas Matena 67009d80fd Ramming parameters reduced to one and connected to the wipe tower generator again 2018-03-15 14:04:12 +01:00
bubnikv 61ae78432c Removed the unsupported "pillars" support pattern. 2018-03-14 20:08:34 +01:00
Lukas Matena 9f18b639a8 Added filament_ramming_parameters and filament_ramming_buttons into configuration layer 2018-03-14 15:48:37 +01:00
Lukas Matena 27ab8ff4e1 Configuration layer changes (cooling_time, bridging, adhesion moved from dedicated dialog to filament/print settings) 2018-03-12 15:41:25 +01:00
Lukas Matena 1c6fa6660e Merge branch 'master' into wipe_tower_improvements 2018-03-09 15:10:15 +01:00
Enrico Turri bdd2d725c8 Out of bed detection - 1st installment 2018-03-09 10:40:42 +01:00
Vojtech Kral 7cfc5204c8 WIP: OctoPrint 2018-03-05 18:33:15 +01:00
Lukas Matena b3e9b82280 (Un)loading speed and time delay parameters introduced into GUI and conf. layer (not yet into wipe tower generator) 2018-03-02 15:52:16 +01:00
Lukas Matena d2006c8d8e Cooling tubes parameters added into GUI and configuration layer (not yet into wipe tower generator) 2018-03-01 16:15:00 +01:00
Lukas Matena a62ad3323f First naive implementation of wipe tower settings dialog 2018-02-28 16:04:56 +01:00
Merill d59bb027eb Gyroid infill type (#733) 
Gyroid infill type.
 2018-02-22 09:56:05 +01:00
Lukas Matena de92f45eaf Merge with master 2018-02-21 13:22:51 +01:00
bubnikv fec1fcdca8 Separated the Marlin G-code flavor from the RepRap G-code flavor 
due to the differences in the M203 code
(RepRap firmware has it in mm/min, Marlin in mm/sec).
This difference is important to the G-code time estimator.

Changed the g-code flavor to Marlin for all Prusa3D bundled profiles.
 2018-01-06 18:49:28 +01:00
Lukas Matena 2921302fe9 GUI integration of rotation angle setting 2017-11-30 12:08:22 +01:00
bubnikv 672194b475 Ported the between_objects_gcode custom G-code blocks, 
thanks @lordofhyphens, https://github.com/alexrj/Slic3r/pull/3275

Improved handling of custom G-code blocks: Slic3r will try to extract
the target extruder and bed temperatures from the custom G-code blocks.
 2017-11-28 15:19:57 +01:00
bubnikv 2455aee97c Further reduction of Perl Config.pm methods. 2017-10-27 18:52:35 +02:00
bubnikv 67ce4d862b One more fix of the preceding commit. 2017-10-17 17:48:04 +02:00
bubnikv 38aca5047f Fix of the preceding commit for gcc & clang: 
Add a class name suffix to the s_cache static members
of the StaticPrintConfig derived classes.
 2017-10-17 17:37:03 +02:00
bubnikv 3731820c48 Optimization of the configuration layer: 
The values of StaticPrintConfig derived objects were searched by a name
walking through a huge chained if.
Now they are being mapped with a std::map.
Also initialization of StaticPrintConfig classes from their ConfigOptionDef
defaults is done by maintaining a single global definition of each
StaticPrintConfig derived class, and a new instance is initialized
from this static copy.

Also the ConfigOption instances are casted using static_cast
wherever possible, and their types are verified by a virtual type() method.
This approach avoids insiginificant performance penalty of a dynamic_cast.

Also the compare and clone methods were added to ConfigOption,
and the cloning & compare work on binary values, not by serialization.
 2017-10-17 16:01:18 +02:00
bubnikv e16f827223 Ported PrintConfigBase::_handle_legacy from Perl to C++, 
merged from upstream Slic3r, thanks to @alexrj.
 2017-09-18 09:56:48 +02:00
bubnikv 71f99423c5 New feature: Bridging angle override through a bridge_angle config 
variable. When set to zero, the usual automatic bridge detection applies.
The bridging angle override may be set at the Infill->Advanced settings,
or through a modifier mesh.
 2017-07-31 16:23:52 +02:00
bubnikv a6ea01a23f Moved some math macros (sqr, lerp, clamp) to libslic3r.h 
Added UNUSED macro to libslic3r.h, used it to reduce some compile warnings.

Split the Int128 class from Clipper library to a separate file,
extended Int128 with intrinsic types wherever possible for performance,
added new geometric predicates.

Added a draft of new FillRectilinear3, which should reduce overfill near the perimeters in the future.
 2017-07-27 10:39:43 +02:00
bubnikv 969e3f4a80 Fixed "Fill angle of any number other than an Integer does not work" 
https://github.com/prusa3d/Slic3r/issues/427
Also enabled floating point rotation angle for supports.
 2017-07-20 13:38:10 +02:00
bubnikv 8160db23cc Implementation of "XY size Compensation for first layer" 
https://github.com/prusa3d/Slic3r/issues/190
 2017-06-26 16:28:10 +02:00
bubnikv f0325575c2 Slic3r has been modified to propagate the following filament specific 
values to GCode generator, one per active extruder:

bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time

Now it remains to extend Slic3r to correctly apply these values.
 2017-06-21 16:15:39 +02:00
bubnikv f7831240e1 Fixed compilation on OSX 2017-06-13 12:09:49 +02:00
bubnikv ad3be1a69e Implemented filament start / g-codes. 
https://github.com/prusa3d/Slic3r/issues/265
https://github.com/prusa3d/Slic3r/issues/319
Based on the implementation by @lordofhyphens
https://github.com/alexrj/Slic3r/commit/19eea19d916d2b45ca45e22cf34e4e148ac477a1
 2017-06-05 11:30:57 +02:00
bubnikv 556f40bf00 Clean-up of print step invalidation. 2017-05-31 17:02:23 +02:00
bubnikv c8b934f8d3 Yet more refactoring of Print / PrintObject in regard to 
C++11 loops, configuration and step invalidation.
 2017-05-31 12:55:59 +02:00
bubnikv 7d64c465c0 New config field extruder_color for preview of extruder assignment. 2017-05-24 15:20:20 +02:00
bubnikv a99b006b98 Implemented https://github.com/prusa3d/Slic3r/issues/199 
by merging the work by @lordofhyphens done on https://github.com/alexrj/Slic3r/issues/3268
 2017-05-20 15:29:25 +02:00
bubnikv 70db88dd90 Improved retract handling on bowden extruders: 
Separated deretract speed from a retract speed,
allowed a partial retract before wipe.
 2017-05-19 19:24:21 +02:00
bubnikv c22b6edeeb Initial integration of the Prusa MultiMatrial Wipe Tower. 2017-05-16 13:45:28 +02:00
bubnikv 18bb3c3244 Added Notes Tab to Printer Settings #210 2017-05-05 11:59:51 +02:00
bubnikv 72ae3585e4 Removed a broken Arc Fitting feature. 
Removed the questionable Pressure Advance feature. It is better to use the Pressure Advance implemented into a firmware.
Added a C++ implementation of GCodeReader and SpiralVase, thanks to @alexrj
Added a C++ implementation of GCodeTimeEstimator, thanks to @lordofhyphens
 2017-04-26 14:24:31 +02:00
bubnikv 420e387055 new feature: Clip multi-part objects one by the other. 
This works the same way as if the XY compensation was set to a tiny value
before, but without the overhead of an offset.
 2017-02-14 12:36:04 +01:00
Joseph Lenox abda054720 Cherry-picked Repetier acceleration fixes, thanks to @lordofhyphens 
https://github.com/lordofhyphens/Slic3r/commit/e0d8101627659ef2dcf1c49d5c9b512eb4e31a46
https://github.com/lordofhyphens/Slic3r/commit/885f27b8aea0df8be351825b9dd6061696f5edc9

Added a printer settings to enable / disable variable layer height editing.
 2017-02-10 09:39:19 +01:00
Joseph Lenox 3846d9e734 Add weight/cost output to gcode. On the way to #647 2017-02-08 11:39:45 +01:00
bubnikv 957803e60c Added min_layer_height, max_layer_height per nozzle settings 
for controlling the support layer height & variable layer height.
Added an experimental "rear" seam option.
 2017-02-07 18:46:02 +01:00
bubnikv 1ba03af2da Made the config value support_material_xy_spacing relative 
to the external perimeter width.
 2017-01-05 09:12:24 +01:00
slicer-builder bb22f1dc8a prototyping tweakable XY supports; 
option should be present now in advanced support menu.
Can't figure out what's going on atm; support should be moving but isn't
 2017-01-03 11:46:52 +01:00
bubnikv 26a8017e99 Made the support interface contact loops configurable. 2016-11-30 17:33:55 +01:00
bubnikv 556204fddc support_material_synchronize_layers configuration value 
for synchronization of object layers with print layers.
 2016-11-30 16:04:15 +01:00
bubnikv 317e9131e8 New sparse infill: "stars" - David's star shaped infill. 
This is very similar to a "triangles" infill, but maximum two lines
intersect at a single point.

added utility function get_extents_vector()
 2016-11-09 15:39:12 +01:00