iGoX/3d-printers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Full OrcaSlicer config for Ender3 & ASWX4P

Browse Source
This commit is contained in:
iGoX
2025-09-03 12:34:20 +02:00
parent 26059687a4
commit 734071765d
861 changed files with 56695 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

85
OrcaSlicer/system/Artillery/filament/Artillery ABS.json Normal file
View File

@@ -0,0 +1,85 @@
{
"instantiation": "true",
"from": "system",
"compatible_printers": [
"Artillery Sidewinder X3 Pro 0.4 nozzle",
"Artillery Sidewinder X3 Plus 0.4 nozzle",
"Artillery Sidewinder X4 Pro 0.4 nozzle",
"Artillery Sidewinder X4 Plus 0.4 nozzle"
],
"filament_retraction_length": [
"1.3"
],
"filament_retraction_speed": [
"40"
],
"filament_settings_id": [
"Artillery ABS"
],
"filament_start_gcode": [
""
],
"filament_type": [
"ABS"
],
"filament_vendor": [
"Artillery"
],
"filament_z_hop": [
"0.4"
],
"hot_plate_temp": [
"100"
],
"hot_plate_temp_initial_layer": [
"100"
],
"inherits": "Artillery Generic PLA",
"name": "Artillery ABS",
"nozzle_temperature": [
"260"
],
"nozzle_temperature_initial_layer": [
"260"
],
"nozzle_temperature_range_high": [
"270"
],
"nozzle_temperature_range_low": [
"240"
],
"fan_max_speed": [
"20"
],
"fan_min_speed": [
"10"
],
"fan_cooling_layer_time": [
"30"
],
"slow_down_layer_time": [
"3"
],
"filament_max_volumetric_speed": [
"16"
],
"temperature_vitrification": [
"220"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"80"
],
"close_fan_the_first_x_layers": [
"3"
],
"enable_pressure_advance": [
"1"
],
"pressure_advance": [
"0.05"
],
"version": "2.0.2.0"
}

22
OrcaSlicer/system/Artillery/filament/Artillery Generic ABS.json Normal file
View File

@@ -0,0 +1,22 @@
{
"type": "filament",
"filament_id": "GFB99",
"setting_id": "GFSA04",
"name": "Artillery Generic ABS",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_abs",
"filament_flow_ratio": [
"0.926"
],
"filament_max_volumetric_speed": [
"12"
],
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle",
"Artillery Genius 0.4 nozzle",
"Artillery Sidewinder X2 0.4 nozzle",
"Artillery Genius Pro 0.4 nozzle",
"Artillery Hornet 0.4 nozzle"
]
}

22
OrcaSlicer/system/Artillery/filament/Artillery Generic ASA.json Normal file
View File

@@ -0,0 +1,22 @@
{
"type": "filament",
"filament_id": "GFB98",
"setting_id": "GFSA04",
"name": "Artillery Generic ASA",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_asa",
"filament_flow_ratio": [
"0.93"
],
"filament_max_volumetric_speed": [
"12"
],
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle",
"Artillery Genius 0.4 nozzle",
"Artillery Sidewinder X2 0.4 nozzle",
"Artillery Genius Pro 0.4 nozzle",
"Artillery Hornet 0.4 nozzle"
]
}

52
OrcaSlicer/system/Artillery/filament/Artillery Generic PETG.json Normal file
View File

@@ -0,0 +1,52 @@
{
"type": "filament",
"filament_id": "GFG99",
"setting_id": "GFSA04",
"name": "Artillery Generic PETG",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_pet",
"reduce_fan_stop_start_freq": [
"1"
],
"slow_down_for_layer_cooling": [
"1"
],
"fan_cooling_layer_time": [
"30"
],
"overhang_fan_speed": [
"90"
],
"overhang_fan_threshold": [
"25%"
],
"fan_max_speed": [
"90"
],
"fan_min_speed": [
"40"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"8"
],
"filament_flow_ratio": [
"0.95"
],
"filament_max_volumetric_speed": [
"10"
],
"filament_start_gcode": [
"; filament start gcode\n"
],
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle",
"Artillery Genius 0.4 nozzle",
"Artillery Sidewinder X2 0.4 nozzle",
"Artillery Genius Pro 0.4 nozzle",
"Artillery Hornet 0.4 nozzle"
]
}

40
OrcaSlicer/system/Artillery/filament/Artillery Generic PLA-CF.json Normal file
View File

@@ -0,0 +1,40 @@
{
"type": "filament",
"filament_id": "GFL98",
"setting_id": "GFSA04",
"name": "Artillery Generic PLA-CF",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_pla",
"filament_flow_ratio": [
"0.95"
],
"filament_type": [
"PLA-CF"
],
"filament_max_volumetric_speed": [
"12"
],
"slow_down_layer_time": [
"7"
],
"hot_plate_temp" : [
"60"
],
"hot_plate_temp_initial_layer" : [
"60"
],
"nozzle_temperature_initial_layer": [
"200"
],
"nozzle_temperature": [
"200"
],
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle",
"Artillery Genius 0.4 nozzle",
"Artillery Sidewinder X2 0.4 nozzle",
"Artillery Genius Pro 0.4 nozzle",
"Artillery Hornet 0.4 nozzle"
]
}

37
OrcaSlicer/system/Artillery/filament/Artillery Generic PLA.json Normal file
View File

@@ -0,0 +1,37 @@
{
"type": "filament",
"filament_id": "GFL99",
"setting_id": "GFSA04",
"name": "Artillery Generic PLA",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_pla",
"filament_flow_ratio": [
"0.98"
],
"filament_max_volumetric_speed": [
"12"
],
"slow_down_layer_time": [
"8"
],
"hot_plate_temp" : [
"60"
],
"hot_plate_temp_initial_layer" : [
"60"
],
"nozzle_temperature_initial_layer": [
"200"
],
"nozzle_temperature": [
"200"
],
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle",
"Artillery Genius 0.4 nozzle",
"Artillery Sidewinder X2 0.4 nozzle",
"Artillery Genius Pro 0.4 nozzle",
"Artillery Hornet 0.4 nozzle"
]
}

19
OrcaSlicer/system/Artillery/filament/Artillery Generic TPU.json Normal file
View File

@@ -0,0 +1,19 @@
{
"type": "filament",
"filament_id": "GFU99",
"setting_id": "GFSA04",
"name": "Artillery Generic TPU",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_tpu",
"filament_max_volumetric_speed": [
"3.2"
],
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle",
"Artillery Genius 0.4 nozzle",
"Artillery Sidewinder X2 0.4 nozzle",
"Artillery Genius Pro 0.4 nozzle",
"Artillery Hornet 0.4 nozzle"
]
}

85
OrcaSlicer/system/Artillery/filament/Artillery PETG.json Normal file
View File

@@ -0,0 +1,85 @@
{
"instantiation": "true",
"from": "system",
"compatible_printers": [
"Artillery Sidewinder X3 Pro 0.4 nozzle",
"Artillery Sidewinder X3 Plus 0.4 nozzle",
"Artillery Sidewinder X4 Pro 0.4 nozzle",
"Artillery Sidewinder X4 Plus 0.4 nozzle"
],
"filament_retraction_length": [
"1.3"
],
"filament_retraction_speed": [
"40"
],
"filament_settings_id": [
"Artillery PETG"
],
"filament_start_gcode": [
""
],
"filament_type": [
"PETG"
],
"filament_vendor": [
"Artillery"
],
"filament_z_hop": [
"0.4"
],
"hot_plate_temp": [
"70"
],
"hot_plate_temp_initial_layer": [
"70"
],
"inherits": "Artillery Generic PLA",
"name": "Artillery PETG",
"nozzle_temperature": [
"250"
],
"nozzle_temperature_initial_layer": [
"250"
],
"nozzle_temperature_range_high": [
"270"
],
"nozzle_temperature_range_low": [
"230"
],
"fan_max_speed": [
"40"
],
"fan_min_speed": [
"10"
],
"fan_cooling_layer_time": [
"30"
],
"slow_down_layer_time": [
"12"
],
"filament_max_volumetric_speed": [
"9"
],
"temperature_vitrification": [
"220"
],
"close_fan_the_first_x_layers": [
"3"
],
"overhang_fan_threshold": [
"10%"
],
"overhang_fan_speed": [
"90"
],
"enable_pressure_advance": [
"1"
],
"pressure_advance": [
"0.05"
],
"version": "2.0.2.0"
}

64
OrcaSlicer/system/Artillery/filament/Artillery PLA Basic.json Normal file
View File

@@ -0,0 +1,64 @@
{
"instantiation": "true",
"from": "system",
"compatible_printers": [
"Artillery Sidewinder X3 Pro 0.4 nozzle",
"Artillery Sidewinder X3 Plus 0.4 nozzle",
"Artillery Sidewinder X4 Pro 0.4 nozzle",
"Artillery Sidewinder X4 Plus 0.4 nozzle"
],
"filament_retraction_length": [
"1.3"
],
"filament_retraction_speed": [
"40"
],
"filament_settings_id": [
"Artillery PLA Basic"
],
"filament_start_gcode": [
""
],
"filament_type": [
"PLA Basic"
],
"filament_vendor": [
"Artillery"
],
"filament_z_hop": [
"0.4"
],
"inherits": "Artillery Generic PLA",
"name": "Artillery PLA Basic",
"nozzle_temperature": [
"210"
],
"nozzle_temperature_initial_layer": [
"210"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"fan_cooling_layer_time": [
"80"
],
"slow_down_layer_time": [
"8"
],
"filament_max_volumetric_speed": [
"21"
],
"temperature_vitrification": [
"190"
],
"enable_pressure_advance": [
"1"
],
"pressure_advance": [
"0.046"
],
"version": "2.0.2.0"
}

64
OrcaSlicer/system/Artillery/filament/Artillery PLA Matte.json Normal file
View File

@@ -0,0 +1,64 @@
{
"instantiation": "true",
"from": "system",
"compatible_printers": [
"Artillery Sidewinder X3 Pro 0.4 nozzle",
"Artillery Sidewinder X3 Plus 0.4 nozzle",
"Artillery Sidewinder X4 Pro 0.4 nozzle",
"Artillery Sidewinder X4 Plus 0.4 nozzle"
],
"filament_retraction_length": [
"1.3"
],
"filament_retraction_speed": [
"40"
],
"filament_settings_id": [
"Artillery PLA Matte"
],
"filament_start_gcode": [
""
],
"filament_type": [
"PLA Matte"
],
"filament_vendor": [
"Artillery"
],
"filament_z_hop": [
"0.4"
],
"inherits": "Artillery Generic PLA",
"name": "Artillery PLA Matte",
"nozzle_temperature": [
"210"
],
"nozzle_temperature_initial_layer": [
"210"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"fan_cooling_layer_time": [
"80"
],
"slow_down_layer_time": [
"8"
],
"filament_max_volumetric_speed": [
"22"
],
"temperature_vitrification": [
"190"
],
"enable_pressure_advance": [
"1"
],
"pressure_advance": [
"0.046"
],
"version": "2.0.2.0"
}

64
OrcaSlicer/system/Artillery/filament/Artillery PLA Silk.json Normal file
View File

@@ -0,0 +1,64 @@
{
"instantiation": "true",
"from": "system",
"compatible_printers": [
"Artillery Sidewinder X3 Pro 0.4 nozzle",
"Artillery Sidewinder X3 Plus 0.4 nozzle",
"Artillery Sidewinder X4 Pro 0.4 nozzle",
"Artillery Sidewinder X4 Plus 0.4 nozzle"
],
"filament_retraction_length": [
"1.3"
],
"filament_retraction_speed": [
"40"
],
"filament_settings_id": [
"Artillery PLA Silk"
],
"filament_start_gcode": [
""
],
"filament_type": [
"PLA Silk"
],
"filament_vendor": [
"Artillery"
],
"filament_z_hop": [
"0.4"
],
"inherits": "Artillery Generic PLA",
"name": "Artillery PLA Silk",
"nozzle_temperature": [
"210"
],
"nozzle_temperature_initial_layer": [
"210"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"fan_cooling_layer_time": [
"80"
],
"slow_down_layer_time": [
"8"
],
"filament_max_volumetric_speed": [
"12"
],
"temperature_vitrification": [
"190"
],
"enable_pressure_advance": [
"1"
],
"pressure_advance": [
"0.046"
],
"version": "2.0.2.0"
}

70
OrcaSlicer/system/Artillery/filament/Artillery PLA Tough.json Normal file
View File

@@ -0,0 +1,70 @@
{
"instantiation": "true",
"from": "system",
"compatible_printers": [
"Artillery Sidewinder X3 Pro 0.4 nozzle",
"Artillery Sidewinder X3 Plus 0.4 nozzle",
"Artillery Sidewinder X4 Pro 0.4 nozzle",
"Artillery Sidewinder X4 Plus 0.4 nozzle"
],
"filament_retraction_length": [
"1.3"
],
"filament_retraction_speed": [
"40"
],
"filament_settings_id": [
"Artillery PLA Tough"
],
"filament_start_gcode": [
""
],
"filament_type": [
"PLA Tough"
],
"filament_vendor": [
"Artillery"
],
"filament_z_hop": [
"0.4"
],
"inherits": "Artillery Generic PLA",
"name": "Artillery PLA Tough",
"nozzle_temperature": [
"220"
],
"nozzle_temperature_initial_layer": [
"220"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"fan_cooling_layer_time": [
"80"
],
"slow_down_layer_time": [
"8"
],
"filament_max_volumetric_speed": [
"21"
],
"temperature_vitrification": [
"190"
],
"hot_plate_temp": [
"65"
],
"hot_plate_temp_initial_layer": [
"65"
],
"enable_pressure_advance": [
"1"
],
"pressure_advance": [
"0.046"
],
"version": "2.0.2.0"
}

82
OrcaSlicer/system/Artillery/filament/Artillery TPU.json Normal file
View File

@@ -0,0 +1,82 @@
{
"instantiation": "true",
"from": "system",
"compatible_printers": [
"Artillery Sidewinder X3 Pro 0.4 nozzle",
"Artillery Sidewinder X3 Plus 0.4 nozzle",
"Artillery Sidewinder X4 Pro 0.4 nozzle",
"Artillery Sidewinder X4 Plus 0.4 nozzle"
],
"filament_retraction_length": [
"1.3"
],
"filament_retraction_speed": [
"40"
],
"filament_settings_id": [
"Artillery TPU"
],
"filament_start_gcode": [
""
],
"filament_type": [
"TPU"
],
"filament_vendor": [
"Artillery"
],
"filament_z_hop": [
"0.4"
],
"hot_plate_temp": [
"45"
],
"hot_plate_temp_initial_layer": [
"45"
],
"inherits": "Artillery Generic PLA",
"name": "Artillery TPU",
"nozzle_temperature": [
"220"
],
"nozzle_temperature_initial_layer": [
"220"
],
"nozzle_temperature_range_high": [
"250"
],
"nozzle_temperature_range_low": [
"200"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"fan_cooling_layer_time": [
"100"
],
"slow_down_layer_time": [
"8"
],
"filament_max_volumetric_speed": [
"3.6"
],
"temperature_vitrification": [
"190"
],
"filament_density": [
"1.22"
],
"overhang_fan_threshold": [
"95%"
],
"enable_pressure_advance": [
"1"
],
"pressure_advance": [
"0.06"
],
"version": "2.0.2.0"
}

82
OrcaSlicer/system/Artillery/filament/fdm_filament_abs.json Normal file
View File

@@ -0,0 +1,82 @@
{
"type": "filament",
"name": "fdm_filament_abs",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"105"
],
"eng_plate_temp" : [
"105"
],
"hot_plate_temp" : [
"105"
],
"cool_plate_temp_initial_layer" : [
"105"
],
"eng_plate_temp_initial_layer" : [
"105"
],
"hot_plate_temp_initial_layer" : [
"105"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"30"
],
"filament_max_volumetric_speed": [
"28.6"
],
"filament_type": [
"ABS"
],
"filament_density": [
"1.04"
],
"filament_cost": [
"20"
],
"nozzle_temperature_initial_layer": [
"260"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"10"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"80"
],
"nozzle_temperature": [
"260"
],
"temperature_vitrification": [
"110"
],
"nozzle_temperature_range_low": [
"240"
],
"nozzle_temperature_range_high": [
"270"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"3"
]
}

82
OrcaSlicer/system/Artillery/filament/fdm_filament_asa.json Normal file
View File

@@ -0,0 +1,82 @@
{
"type": "filament",
"name": "fdm_filament_asa",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"105"
],
"eng_plate_temp" : [
"105"
],
"hot_plate_temp" : [
"105"
],
"cool_plate_temp_initial_layer" : [
"105"
],
"eng_plate_temp_initial_layer" : [
"105"
],
"hot_plate_temp_initial_layer" : [
"105"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"35"
],
"filament_max_volumetric_speed": [
"28.6"
],
"filament_type": [
"ASA"
],
"filament_density": [
"1.04"
],
"filament_cost": [
"20"
],
"nozzle_temperature_initial_layer": [
"260"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"10"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"80"
],
"nozzle_temperature": [
"260"
],
"temperature_vitrification": [
"110"
],
"nozzle_temperature_range_low": [
"240"
],
"nozzle_temperature_range_high": [
"270"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"3"
]
}

135
OrcaSlicer/system/Artillery/filament/fdm_filament_common.json Normal file
View File

@@ -0,0 +1,135 @@
{
"type": "filament",
"name": "fdm_filament_common",
"from": "system",
"instantiation": "false",
"cool_plate_temp" : [
"60"
],
"eng_plate_temp" : [
"60"
],
"hot_plate_temp" : [
"60"
],
"cool_plate_temp_initial_layer" : [
"60"
],
"eng_plate_temp_initial_layer" : [
"60"
],
"hot_plate_temp_initial_layer" : [
"60"
],
"overhang_fan_threshold": [
"95%"
],
"overhang_fan_speed": [
"100"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"filament_end_gcode": [
"; filament end gcode \n"
],
"filament_flow_ratio": [
"1"
],
"reduce_fan_stop_start_freq": [
"0"
],
"fan_cooling_layer_time": [
"60"
],
"filament_cost": [
"0"
],
"filament_density": [
"0"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_max_volumetric_speed": [
"0"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_length": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_settings_id": [
""
],
"filament_soluble": [
"0"
],
"filament_type": [
"PLA"
],
"filament_vendor": [
"Generic"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"bed_type": [
"Cool Plate"
],
"nozzle_temperature_initial_layer": [
"200"
],
"full_fan_speed_layer": [
"0"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"35"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"8"
],
"filament_start_gcode": [
"; Filament gcode\n"
],
"nozzle_temperature": [
"200"
],
"temperature_vitrification": [
"100"
]
}

76
OrcaSlicer/system/Artillery/filament/fdm_filament_pet.json Normal file
View File

@@ -0,0 +1,76 @@
{
"type": "filament",
"name": "fdm_filament_pet",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"60"
],
"eng_plate_temp" : [
"0"
],
"hot_plate_temp" : [
"80"
],
"cool_plate_temp_initial_layer" : [
"60"
],
"eng_plate_temp_initial_layer" : [
"0"
],
"hot_plate_temp_initial_layer" : [
"80"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"20"
],
"filament_max_volumetric_speed": [
"25"
],
"filament_type": [
"PETG"
],
"filament_density": [
"1.27"
],
"filament_cost": [
"30"
],
"nozzle_temperature_initial_layer": [
"255"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"20"
],
"overhang_fan_speed": [
"100"
],
"nozzle_temperature": [
"255"
],
"temperature_vitrification": [
"80"
],
"nozzle_temperature_range_low": [
"220"
],
"nozzle_temperature_range_high": [
"260"
],
"filament_start_gcode": [
"; filament start gcode\n"
]
}

88
OrcaSlicer/system/Artillery/filament/fdm_filament_pla.json Normal file
View File

@@ -0,0 +1,88 @@
{
"type": "filament",
"name": "fdm_filament_pla",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"fan_cooling_layer_time": [
"100"
],
"filament_max_volumetric_speed": [
"12"
],
"filament_type": [
"PLA"
],
"filament_density": [
"1.24"
],
"filament_cost": [
"20"
],
"cool_plate_temp" : [
"35"
],
"eng_plate_temp" : [
"0"
],
"hot_plate_temp" : [
"45"
],
"cool_plate_temp_initial_layer" : [
"35"
],
"eng_plate_temp_initial_layer" : [
"0"
],
"hot_plate_temp_initial_layer" : [
"45"
],
"nozzle_temperature_initial_layer": [
"220"
],
"reduce_fan_stop_start_freq": [
"1"
],
"slow_down_for_layer_cooling": [
"1"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"close_fan_the_first_x_layers": [
"1"
],
"nozzle_temperature": [
"220"
],
"temperature_vitrification": [
"60"
],
"nozzle_temperature_range_low": [
"190"
],
"nozzle_temperature_range_high": [
"230"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"4"
],
"additional_cooling_fan_speed": [
"70"
],
"filament_start_gcode": [
"; filament start gcode\n"
]
}

82
OrcaSlicer/system/Artillery/filament/fdm_filament_tpu.json Normal file
View File

@@ -0,0 +1,82 @@
{
"type": "filament",
"name": "fdm_filament_tpu",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"30"
],
"eng_plate_temp" : [
"30"
],
"hot_plate_temp" : [
"35"
],
"cool_plate_temp_initial_layer" : [
"30"
],
"eng_plate_temp_initial_layer" : [
"30"
],
"hot_plate_temp_initial_layer" : [
"35"
],
"fan_cooling_layer_time": [
"100"
],
"filament_max_volumetric_speed": [
"15"
],
"filament_type": [
"TPU"
],
"filament_density": [
"1.24"
],
"filament_cost": [
"20"
],
"filament_retraction_length": [
"0.4"
],
"nozzle_temperature_initial_layer": [
"240"
],
"reduce_fan_stop_start_freq": [
"1"
],
"slow_down_for_layer_cooling": [
"1"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"overhang_fan_speed": [
"100"
],
"additional_cooling_fan_speed": [
"70"
],
"close_fan_the_first_x_layers": [
"1"
],
"nozzle_temperature": [
"240"
],
"temperature_vitrification": [
"60"
],
"nozzle_temperature_range_low": [
"200"
],
"nozzle_temperature_range_high": [
"250"
],
"filament_start_gcode": [
"; filament start gcode\n"
]
}

116
OrcaSlicer/system/Artillery/machine/Artillery Genius 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,116 @@
{
"type": "machine",
"setting_id": "GM003",
"name": "Artillery Genius 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Genius",
"default_print_profile": "0.20mm Standard @Artillery Genius",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1250"
],
"machine_max_acceleration_x": [
"2000",
"1000"
],
"machine_max_acceleration_y": [
"2000",
"1000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"3",
"2.5"
],
"machine_max_jerk_x": [
"7",
"10"
],
"machine_max_jerk_y": [
"7",
"10"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Artillery",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"35"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Artillery Generic PLA"
],
"machine_start_gcode": "M83; extruder relative mode\nG28; home all axes\nM109 S[nozzle_temperature_initial_layer]; hotend temperature\nM140 S[bed_temperature_initial_layer_single]; heatbed temperature\nM190 S[bed_temperature_initial_layer_single]; wait for the bed to heat up\nM109 S[nozzle_temperature_initial_layer]; wait for the extruder to heat up\nG92 E0; reset extruder\nG1 X20 Y5 Z0.3 F5000.0; move to start-line position\nG1 Z0.3 F1000; print height\nG1 X200 Y5 F1500.0 E15; draw 1st line\nG1 X200 Y5.3 Z0.3 F5000.0; move to side a little\nG1 X5.3 Y5.3 Z0.3 F1500.0 E30; draw 2nd line\nG1 Z3 F3000; move z up little to prevent scratching of surface",
"machine_end_gcode": "G91; Relative positionning\nG1 E-2 Z0.2 F2400; Retract and raise Z\nG1 X5 Y5 F3000; Wipe out\nG1 Z10; Raise Z more\nG90; Absolute positionning\nG1 X0 Y100; Present print\nM106 S0; Turn-off fan\nM104 S0; Turn-off hotend\nM140 S0; Turn-off bed\nM84 X Y E; Disable all steppers but Z",
"layer_change_gcode": "",
"scan_first_layer": "0"
}

117
OrcaSlicer/system/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,117 @@
{
"type": "machine",
"setting_id": "GM003",
"name": "Artillery Genius Pro 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Genius Pro",
"default_print_profile": "0.20mm Standard @Artillery Genius Pro",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1250"
],
"machine_max_acceleration_x": [
"2000",
"1000"
],
"machine_max_acceleration_y": [
"2000",
"1000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"3",
"2.5"
],
"machine_max_jerk_x": [
"7",
"10"
],
"machine_max_jerk_y": [
"7",
"10"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Artillery",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"35"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Artillery Generic PLA"
],
"machine_start_gcode": "M83; extruder relative mode\nG28; home all axes\nG29 S12000; bed mesh leveling\nM104 S[nozzle_temperature_initial_layer]; set hotend temperature\nM140 S[bed_temperature_initial_layer_single]; set heatbed temperature\nG90; Absolute Positioning\nG1 Y0 F5000; Move to front\nG1 X0 F5000; Move to origin\nM190 S[bed_temperature_initial_layer_single]; wait for the bed to heat up\nM109 S[nozzle_temperature_initial_layer]; wait for the extruder to heat up\nG92 E0; reset extruder\nG1 X20 Y5 Z0.3 F5000.0; move to start-line position\nG1 Z0.3 F1000; print height\nG1 X200 Y5 F1500.0 E15; draw 1st line\nG1 X200 Y5.3 Z0.3 F5000.0; move to side a little\nG1 X5.3 Y5.3 Z0.3 F1500.0 E30; draw 2nd line\nG1 Z3 F3000; move z up little to prevent scratching of surface",
"machine_end_gcode": "G91; Relative positionning\nG1 E-2 Z0.2 F2400; Retract and raise Z\nG1 X5 Y5 F3000; Wipe out\nG1 Z10; Raise Z more\nG90; Absolute positionning\nG1 X0 Y100; Present print\nM106 S0; Turn-off fan\nM104 S0; Turn-off hotend\nM140 S0; Turn-off bed\nM84 X Y E; Disable all steppers but Z",
"layer_change_gcode": "",
"scan_first_layer": "0"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Genius Pro.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Genius Pro",
"model_id": "Artillery-Genius-Pro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_geniuspro_buildplate_model.stl",
"bed_texture": "artillery_geniuspro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Genius.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Genius",
"model_id": "Artillery-Genius",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_genius_buildplate_model.stl",
"bed_texture": "artillery_genius_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
}

115
OrcaSlicer/system/Artillery/machine/Artillery Hornet 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,115 @@
{
"type": "machine",
"setting_id": "GM003",
"name": "Artillery Hornet 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Hornet",
"default_print_profile": "0.20mm Standard @Artillery Hornet",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"0x0",
"230x0",
"230x230",
"0x230"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1250"
],
"machine_max_acceleration_x": [
"2000",
"1000"
],
"machine_max_acceleration_y": [
"2000",
"1000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"3",
"2.5"
],
"machine_max_jerk_x": [
"7",
"10"
],
"machine_max_jerk_y": [
"7",
"10"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Artillery",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.2"
],
"retract_length_toolchange": [
"10"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Artillery Generic PLA"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{hot_plate_temp_initial_layer[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{nozzle_temperature_initial_layer[0]} ; set final nozzle temp\nM190 S{hot_plate_temp_initial_layer[0]} ; wait for bed temp to stabilize\nM109 S{nozzle_temperature_initial_layer[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Hornet.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Hornet",
"model_id": "Artillery-Hornet",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_hornet_buildplate_model.stl",
"bed_texture": "artillery_hornet_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
}

117
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,117 @@
{
"type": "machine",
"setting_id": "GM003",
"name": "Artillery Sidewinder X1 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Sidewinder X1",
"default_print_profile": "0.20mm Standard @Artillery X1",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "400",
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1000"
],
"machine_max_acceleration_x": [
"1000",
"960"
],
"machine_max_acceleration_y": [
"1000",
"960"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"200",
"100"
],
"machine_max_speed_y": [
"200",
"100"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"1.5",
"1.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Artillery",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"35"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Artillery Generic PLA"
],
"machine_start_gcode": "; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[bed_temperature_initial_layer_single] ; wait for bed to heat up\nM104 S[nozzle_temperature_initial_layer] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[nozzle_temperature_initial_layer] ; wait for the nozzle to heat up\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}",
"machine_end_gcode": "G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < printable_height}G1 Z{z_offset+min(layer_z+120, printable_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X1.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Sidewinder X1",
"model_id": "Artillery-Sidewinder-X1",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_sidewinderx1_buildplate_model.stl",
"bed_texture": "artillery_sidewinderx1_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
}

117
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,117 @@
{
"type": "machine",
"setting_id": "GM003",
"name": "Artillery Sidewinder X2 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Sidewinder X2",
"default_print_profile": "0.20mm Standard @Artillery X2",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "400",
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1000"
],
"machine_max_acceleration_x": [
"1000",
"960"
],
"machine_max_acceleration_y": [
"1000",
"960"
],
"machine_max_acceleration_z": [
"1000",
"1000"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"200",
"100"
],
"machine_max_speed_y": [
"200",
"100"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"1.5",
"1.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Artillery",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"35"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Artillery Generic PLA"
],
"machine_start_gcode": "; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12 ; K factor\nM900 W[line_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[bed_temperature_initial_layer_single] ; wait for bed to heat up\nM104 S[nozzle_temperature_initial_layer] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[nozzle_temperature_initial_layer] ; wait for the nozzle to heat up\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}",
"machine_end_gcode": "G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < printable_height}G1 Z{z_offset+min(layer_z+120, printable_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X2.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Sidewinder X2",
"model_id": "Artillery-Sidewinder-X2",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_sidewinderx2_buildplate_model.stl",
"bed_texture": "artillery_sidewinderx2_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA"
}

229
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,229 @@
{
"type": "machine",
"setting_id": "GM005",
"name": "Artillery Sidewinder X3 Plus 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Sidewinder X3 Plus",
"default_print_profile": "0.20mm Standard @Artillery Genius",
"default_filament_profile": [
"Artillery PLA Basic"
],
"printer_settings_id": "Artillery X3Plus 0.4 nozzle",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "\n",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"deretraction_speed": [
"0"
],
"disable_m73": "0",
"emit_machine_limits_to_gcode": "0",
"enable_filament_ramming": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "140",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_radius": "65",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "marlin",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "",
"machine_end_gcode": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM211 S1",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"3000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1250"
],
"machine_max_acceleration_x": [
"3000",
"1000"
],
"machine_max_acceleration_y": [
"3000",
"1000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_jerk_e": [
"3",
"2.5"
],
"machine_max_jerk_x": [
"7",
"10"
],
"machine_max_jerk_y": [
"7",
"10"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M600",
"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_diameter": [
"0.4"
],
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "92",
"preferred_orientation": "0",
"print_host": "",
"print_host_webui": "",
"printable_area": [
"0x0",
"300x0",
"300x305",
"0x305"
],
"printable_height": "400",
"printer_notes": "",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"10"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"2.2"
],
"retraction_minimum_travel": [
"2"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"version": "2.0.2.0",
"wipe": [
"0"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"z_offset": "0"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Plus.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Sidewinder X3 Plus",
"model_id": "Artillery-Sidewinder-X3-Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_sidewinderx3plus_buildplate_model.stl",
"bed_texture": "",
"hotend_model": "",
"default_materials": "Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA Tough;Artillery PETG;Artillery TPU;Artillery ABS;"
}

230
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,230 @@
{
"type": "machine",
"setting_id": "GM004",
"name": "Artillery Sidewinder X3 Pro 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Sidewinder X3 Pro",
"default_print_profile": "0.20mm Standard @Artillery Genius",
"printer_settings_id": "Artillery X3 Pro 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"default_filament_profile": [
"Artillery PLA Basic"
],
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"deretraction_speed": [
"0"
],
"disable_m73": "0",
"emit_machine_limits_to_gcode": "0",
"enable_filament_ramming": "0",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "140",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_radius": "65",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "marlin2",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "",
"machine_end_gcode": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM211 S1",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"3000",
"1250"
],
"machine_max_acceleration_retracting": [
"3000",
"1250"
],
"machine_max_acceleration_travel": [
"3000",
"1250"
],
"machine_max_acceleration_x": [
"3000",
"1000"
],
"machine_max_acceleration_y": [
"3000",
"1000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_jerk_e": [
"3",
"2.5"
],
"machine_max_jerk_x": [
"7",
"10"
],
"machine_max_jerk_y": [
"7",
"10"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M600",
"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "92",
"preferred_orientation": "0",
"print_host": "",
"print_host_webui": "",
"printable_area": [
"0x0",
"240x0",
"240x245",
"0x245"
],
"printable_height": "260",
"printer_notes": "",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"10"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"2.2"
],
"retraction_minimum_travel": [
"2"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"version": "2.0.2.0",
"wipe": [
"0"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"z_offset": "0"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X3 Pro.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Sidewinder X3 Pro",
"model_id": "Artillery-Sidewinder-X3-Pro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_sidewinderx3pro_buildplate_model.stl",
"bed_texture": "",
"hotend_model": "",
"default_materials": "Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA Tough;Artillery PETG;Artillery TPU;Artillery ABS;"
}

229
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,229 @@
{
"type": "machine",
"setting_id": "GM006",
"name": "Artillery Sidewinder X4 Plus 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Sidewinder X4 Plus",
"printer_settings_id": "Artillery X4Plus 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"default_filament_profile": [
"Artillery PLA Basic"
],
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "\n",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"default_print_profile": "0.20mm Standard @Artillery Genius",
"deretraction_speed": [
"0"
],
"disable_m73": "0",
"emit_machine_limits_to_gcode": "0",
"enable_filament_ramming": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "140",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_radius": "65",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "G92 E0",
"machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y305 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"6000",
"5000"
],
"machine_max_acceleration_extruding": [
"6000",
"1250"
],
"machine_max_acceleration_retracting": [
"6000",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1250"
],
"machine_max_acceleration_x": [
"6000",
"1000"
],
"machine_max_acceleration_y": [
"6000",
"1000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_jerk_e": [
"3",
"2.5"
],
"machine_max_jerk_x": [
"7",
"10"
],
"machine_max_jerk_y": [
"7",
"10"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M600",
"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X230 Y300 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y20 F4000\nG1 X230 F4000\nG1 Z-1 F600 \nG1 X270 F4000\nG1 Y25 F4000\nG1 X230 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=300\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X200 Y0.8 Z0.3 F1800.0 E20.0;draw line\nG92 E0\nG1 X200 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X100 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X100 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X180 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X180 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "92",
"preferred_orientation": "0",
"print_host": "192.168.0.249",
"print_host_webui": "",
"printable_area": [
"0x0",
"300x0",
"300x310",
"0x310"
],
"printable_height": "400",
"printer_notes": "",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"10"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1.3"
],
"retraction_minimum_travel": [
"2"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"version": "2.0.2.0",
"wipe": [
"0"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"z_offset": "0"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Plus.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Sidewinder X4 Plus",
"model_id": "Artillery-Sidewinder-X4-Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_sidewinderx4plus_buildplate_model.stl",
"bed_texture": "",
"hotend_model": "",
"default_materials": "Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA Tough;Artillery PETG;Artillery TPU;Artillery ABS;"
}

229
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,229 @@
{
"type": "machine",
"setting_id": "GM007",
"name": "Artillery Sidewinder X4 Pro 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Artillery Sidewinder X4 Pro",
"printer_settings_id": "Artillery X4Pro 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"default_filament_profile": [
"Artillery PLA Basic"
],
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "\n",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"default_print_profile": "0.20mm Standard @Artillery Genius",
"deretraction_speed": [
"0"
],
"disable_m73": "0",
"emit_machine_limits_to_gcode": "0",
"enable_filament_ramming": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "140",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_radius": "65",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "G92 E0",
"machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y250 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"6000",
"1250"
],
"machine_max_acceleration_retracting": [
"6000",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1250"
],
"machine_max_acceleration_x": [
"6000",
"1000"
],
"machine_max_acceleration_y": [
"6000",
"1000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_jerk_e": [
"3",
"2.5"
],
"machine_max_jerk_x": [
"7",
"10"
],
"machine_max_jerk_y": [
"7",
"10"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M600",
"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X180 Y247 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y11 F4000\nG1 X180 F4000\nG1 Z-1 F600 \nG1 X230 F4000\nG1 Y15 F4000\nG1 X180 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=247\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X170 Y0.8 Z0.3 F1800.0 E17.0;draw line\nG92 E0\nG1 X170 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X70 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X70 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X150 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X150 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0\n",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "92",
"preferred_orientation": "0",
"print_host": "192.168.0.249",
"print_host_webui": "",
"printable_area": [
"0x0",
"240x0",
"240x250",
"0x250"
],
"printable_height": "260",
"printer_notes": "",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"10"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1.3"
],
"retraction_minimum_travel": [
"2"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"version": "2.0.2.0",
"wipe": [
"0"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"z_offset": "0"
}

12
OrcaSlicer/system/Artillery/machine/Artillery Sidewinder X4 Pro.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Artillery Sidewinder X4 Pro",
"model_id": "Artillery-Sidewinder-X4-Pro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Artillery",
"bed_model": "artillery_sidewinderx4pro_buildplate_model.stl",
"bed_texture": "",
"hotend_model": "",
"default_materials": "Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA Tough;Artillery PETG;Artillery TPU;Artillery ABS;"
}

139
OrcaSlicer/system/Artillery/machine/fdm_machine_common.json Normal file
View File

@@ -0,0 +1,139 @@
{
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin",
"machine_start_gcode": "",
"machine_end_gcode": "",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"5000",
"5000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"1000",
"1000"
],
"machine_max_acceleration_y": [
"1000",
"1000"
],
"machine_max_acceleration_z": [
"1000",
"1000"
],
"machine_max_speed_e": [
"25",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"0.4",
"0.4"
],
"machine_max_jerk_e": [
"1.5",
"1.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.08"
],
"printable_height": "400",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.8"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_pause_gcode": "M400 U1\n",
"wipe": [
"0"
],
"z_hop_types": "Normal Lift"
}

14
OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,14 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"initial_layer_print_height": "0.2",
"internal_solid_infill_line_width": "0.42",
"layer_height": "0.08",
"name": "0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle",
"outer_wall_line_width": "0.42",
"print_settings_id": "0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

5
OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.info Normal file
View File

@@ -0,0 +1,5 @@
sync_info = update
user_id =
setting_id =
base_id =
updated_time = 0

14
OrcaSlicer/system/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,14 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"initial_layer_print_height": "0.2",
"internal_solid_infill_line_width": "0.42",
"layer_height": "0.08",
"name": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle",
"outer_wall_line_width": "0.42",
"print_settings_id": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

20
OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,20 @@
{
"from": "system",
"instantiation": "true",
"default_acceleration": "3000",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"initial_layer_print_height": "0.2",
"inner_wall_speed": "120",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_speed": "150",
"layer_height": "0.08",
"name": "0.08mm High Quality @Artillery X4Plus 0.4 nozzle",
"outer_wall_acceleration": "2000",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"print_settings_id": "0.08mm High Quality @Artillery X4Plus 0.4 nozzle",
"sparse_infill_speed": "150",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

20
OrcaSlicer/system/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,20 @@
{
"from": "system",
"instantiation": "true",
"default_acceleration": "3000",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"initial_layer_print_height": "0.2",
"inner_wall_speed": "120",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_speed": "150",
"layer_height": "0.08",
"name": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle",
"outer_wall_acceleration": "2000",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"print_settings_id": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle",
"sparse_infill_speed": "150",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

14
OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,14 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"initial_layer_print_height": "0.2",
"internal_solid_infill_line_width": "0.42",
"layer_height": "0.12",
"name": "0.12mm Fine @Artillery X4Plus 0.4 nozzle",
"outer_wall_line_width": "0.42",
"print_settings_id": "0.12mm Fine @Artillery X4Plus 0.4 nozzle",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

14
OrcaSlicer/system/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,14 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"initial_layer_print_height": "0.2",
"internal_solid_infill_line_width": "0.42",
"layer_height": "0.12",
"name": "0.12mm Fine @Artillery X4Pro 0.4 nozzle",
"outer_wall_line_width": "0.42",
"print_settings_id": "0.12mm Fine @Artillery X4Pro 0.4 nozzle",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

20
OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,20 @@
{
"from": "system",
"instantiation": "true",
"default_acceleration": "3000",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"initial_layer_print_height": "0.2",
"inner_wall_speed": "150",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_speed": "180",
"layer_height": "0.12",
"name": "0.12mm High Quality @Artillery X4Plus 0.4 nozzle",
"outer_wall_acceleration": "2000",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"print_settings_id": "0.12mm High Quality @Artillery X4Plus 0.4 nozzle",
"sparse_infill_speed": "180",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

20
OrcaSlicer/system/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,20 @@
{
"from": "system",
"instantiation": "true",
"default_acceleration": "3000",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"initial_layer_print_height": "0.2",
"inner_wall_speed": "120",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_speed": "150",
"layer_height": "0.12",
"name": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle",
"outer_wall_acceleration": "2000",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"print_settings_id": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle",
"sparse_infill_speed": "150",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

108
OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.15mm Optimal @Artillery Genius Pro",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.15",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "3",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "0",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0.15",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "2",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.15",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "60",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "110",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Genius Pro 0.4 nozzle"
]
}

108
OrcaSlicer/system/Artillery/process/0.15mm Optimal @Artillery Genius.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.15mm Optimal @Artillery Genius",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.15",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "0",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.15",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "60",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "110",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Genius 0.4 nozzle"
]
}

20
OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,20 @@
{
"from": "system",
"instantiation": "true",
"default_acceleration": "3000",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"initial_layer_print_height": "0.2",
"inner_wall_speed": "150",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_speed": "180",
"layer_height": "0.16",
"name": "0.16mm High Quality @Artillery X4Plus 0.4 nozzle",
"outer_wall_acceleration": "2000",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"print_settings_id": "0.16mm High Quality @Artillery X4Plus 0.4 nozzle",
"sparse_infill_speed": "180",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

20
OrcaSlicer/system/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,20 @@
{
"from": "system",
"instantiation": "true",
"default_acceleration": "3000",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"initial_layer_print_height": "0.2",
"inner_wall_speed": "150",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_speed": "180",
"layer_height": "0.16",
"name": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle",
"outer_wall_acceleration": "2000",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"print_settings_id": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle",
"sparse_infill_speed": "180",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

108
OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery Hornet.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.16mm Optimal @Artillery Hornet",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.16",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "500",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.16",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "40",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Hornet 0.4 nozzle"
]
}

108
OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X1.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.16mm Optimal @Artillery X1",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.16",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "500",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.16",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "40",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle"
]
}

18
OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,18 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"initial_layer_print_height": "0.2",
"inner_wall_speed": "150",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_speed": "180",
"layer_height": "0.16",
"name": "0.16mm Optimal @Artillery X4Plus 0.4 nozzle",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"print_settings_id": "0.16mm Optimal @Artillery X4Plus 0.4 nozzle",
"sparse_infill_speed": "180",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

16
OrcaSlicer/system/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,16 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"initial_layer_print_height": "0.2",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_speed": "180",
"layer_height": "0.16",
"name": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle",
"outer_wall_line_width": "0.42",
"print_settings_id": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle",
"sparse_infill_speed": "180",
"support_line_width": "0.42",
"top_surface_line_width": "0.42",
"version": "2.0.2.0"
}

108
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius Pro.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.20mm Standard @Artillery Genius Pro",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.2",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "3",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "0",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0.15",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "2",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "2",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.2",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "60",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "3",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "110",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Genius Pro 0.4 nozzle"
]
}

108
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Genius.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.20mm Standard @Artillery Genius",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.2",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "0",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.2",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "60",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "110",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Genius 0.4 nozzle"
]
}

108
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery Hornet.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.20mm Standard @Artillery Hornet",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.2",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "500",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.2",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "40",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Hornet 0.4 nozzle"
]
}

108
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X1.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.20mm Standard @Artillery X1",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.2",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "4",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "500",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.2",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "40",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle"
]
}

108
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X2.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.20mm Standard @Artillery X2",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.2",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "4",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "500",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.2",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "40",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Sidewinder X2 0.4 nozzle"
]
}

285
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,285 @@
{
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"accel_to_decel_enable": "1",
"accel_to_decel_factor": "50%",
"alternate_extra_wall": "0",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bottom_solid_infill_flow_ratio": "1",
"bottom_surface_pattern": "monotonic",
"bridge_acceleration": "50%",
"bridge_angle": "0",
"bridge_density": "100%",
"bridge_flow": "1",
"bridge_no_support": "0",
"bridge_speed": "70",
"brim_ears_detection_length": "1",
"brim_ears_max_angle": "125",
"brim_object_gap": "0",
"brim_type": "auto_brim",
"brim_width": "0",
"compatible_printers": [
"Artillery Sidewinder X3 Plus 0.4 nozzle"
],
"compatible_printers_condition": "",
"counterbore_hole_bridging": "none",
"default_acceleration": "3000",
"default_jerk": "0",
"detect_narrow_internal_solid_infill": "1",
"detect_overhang_wall": "1",
"detect_thin_wall": "1",
"dont_filter_internal_bridges": "disabled",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"elefant_foot_compensation_layers": "1",
"enable_arc_fitting": "0",
"enable_overhang_speed": "1",
"enable_prime_tower": "0",
"enable_support": "0",
"enforce_support_layers": "0",
"ensure_vertical_shell_thickness": "ensure_all",
"exclude_object": "0",
"extra_perimeters_on_overhangs": "0",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_X3Plus.gcode",
"filter_out_gap_fill": "0",
"flush_into_infill": "0",
"flush_into_objects": "0",
"flush_into_support": "1",
"fuzzy_skin": "none",
"fuzzy_skin_first_layer": "0",
"fuzzy_skin_point_distance": "0.8",
"fuzzy_skin_thickness": "0.3",
"gap_fill_target": "everywhere",
"gap_infill_speed": "30",
"gcode_add_line_number": "0",
"gcode_comments": "0",
"gcode_label_objects": "0",
"hole_to_polyhole": "0",
"hole_to_polyhole_threshold": "0.01",
"hole_to_polyhole_twisted": "1",
"independent_support_layer_height": "1",
"infill_anchor": "400%",
"infill_anchor_max": "20",
"infill_combination": "0",
"infill_direction": "45",
"infill_jerk": "9",
"infill_wall_overlap": "15%",
"initial_layer_acceleration": "500",
"initial_layer_infill_speed": "30",
"initial_layer_jerk": "9",
"initial_layer_line_width": "0.5",
"initial_layer_min_bead_width": "85%",
"initial_layer_print_height": "0.25",
"initial_layer_speed": "30",
"initial_layer_travel_speed": "100%",
"inner_wall_acceleration": "0",
"inner_wall_jerk": "9",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "100",
"interface_shells": "0",
"internal_bridge_flow": "1",
"internal_bridge_speed": "150%",
"internal_solid_infill_acceleration": "100%",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_pattern": "monotonic",
"internal_solid_infill_speed": "150",
"ironing_angle": "-1",
"ironing_flow": "15%",
"ironing_pattern": "zig-zag",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"is_custom_defined": "0",
"is_infill_first": "0",
"layer_height": "0.2",
"line_width": "0.42",
"make_overhang_printable": "0",
"make_overhang_printable_angle": "55",
"make_overhang_printable_hole_size": "0",
"max_bridge_length": "10",
"max_travel_detour_distance": "0",
"max_volumetric_extrusion_rate_slope": "0",
"max_volumetric_extrusion_rate_slope_segment_length": "3",
"min_bead_width": "85%",
"min_feature_size": "25%",
"min_length_factor": "0.5",
"min_width_top_surface": "300%",
"minimum_sparse_infill_area": "10",
"mmu_segmented_region_interlocking_depth": "0",
"mmu_segmented_region_max_width": "0",
"name": "0.20mm Standard @Artillery X3Plus 0.4 nozzle",
"notes": "",
"only_one_wall_first_layer": "0",
"only_one_wall_top": "0",
"ooze_prevention": "0",
"outer_wall_acceleration": "1500",
"outer_wall_jerk": "9",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"overhang_reverse": "0",
"overhang_reverse_internal_only": "0",
"overhang_reverse_threshold": "50%",
"overhang_speed_classic": "0",
"post_process": [],
"precise_outer_wall": "0",
"prime_tower_brim_width": "3",
"prime_tower_width": "60",
"prime_volume": "45",
"print_flow_ratio": "1",
"print_order": "default",
"print_sequence": "by layer",
"print_settings_id": "0.20mm Standard @Artillery X3Plus 0.4 nozzle",
"raft_contact_distance": "0.1",
"raft_expansion": "1.5",
"raft_first_layer_density": "90%",
"raft_first_layer_expansion": "2",
"raft_layers": "0",
"reduce_crossing_wall": "0",
"reduce_infill_retraction": "1",
"resolution": "0.012",
"role_based_wipe_speed": "1",
"scarf_angle_threshold": "155",
"scarf_joint_flow_ratio": "1",
"scarf_joint_speed": "100%",
"scarf_overhang_threshold": "40%",
"seam_gap": "10%",
"seam_position": "aligned",
"seam_slope_conditional": "0",
"seam_slope_entire_loop": "0",
"seam_slope_inner_walls": "0",
"seam_slope_min_length": "20",
"seam_slope_start_height": "0",
"seam_slope_steps": "10",
"seam_slope_type": "none",
"single_extruder_multi_material_priming": "1",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "0",
"skirt_speed": "50",
"slice_closing_radius": "0.049",
"slicing_mode": "regular",
"slow_down_layers": "0",
"slowdown_for_curled_perimeters": "0",
"small_area_infill_flow_compensation": "0",
"small_area_infill_flow_compensation_model": [
"0,0",
"\n0.2,0.4444",
"\n0.4,0.6145",
"\n0.6,0.7059",
"\n0.8,0.7619",
"\n1.5,0.8571",
"\n2,0.8889",
"\n3,0.9231",
"\n5,0.9520",
"\n10,1"
],
"small_perimeter_speed": "50%",
"small_perimeter_threshold": "0",
"solid_infill_filament": "1",
"sparse_infill_acceleration": "100%",
"sparse_infill_density": "15%",
"sparse_infill_filament": "1",
"sparse_infill_line_width": "0.45",
"sparse_infill_pattern": "crosshatch",
"sparse_infill_speed": "150",
"spiral_mode": "0",
"spiral_mode_max_xy_smoothing": "200%",
"spiral_mode_smooth": "0",
"staggered_inner_seams": "0",
"standby_temperature_delta": "-5",
"support_angle": "0",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_bottom_interface_spacing": "0.5",
"support_bottom_z_distance": "0.2",
"support_critical_regions_only": "0",
"support_expansion": "0",
"support_filament": "0",
"support_interface_bottom_layers": "-1",
"support_interface_filament": "0",
"support_interface_loop_pattern": "1",
"support_interface_not_for_body": "1",
"support_interface_pattern": "auto",
"support_interface_spacing": "1",
"support_interface_speed": "80",
"support_interface_top_layers": "3",
"support_line_width": "0.42",
"support_object_xy_distance": "0.35",
"support_on_build_plate_only": "0",
"support_remove_small_overhang": "1",
"support_speed": "60",
"support_style": "grid",
"support_threshold_angle": "30",
"support_top_z_distance": "0.2",
"support_type": "normal(auto)",
"thick_bridges": "0",
"thick_internal_bridges": "1",
"timelapse_type": "0",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"top_solid_infill_flow_ratio": "1",
"top_surface_acceleration": "0",
"top_surface_jerk": "9",
"top_surface_line_width": "0.42",
"top_surface_pattern": "monotonic",
"top_surface_speed": "150",
"travel_acceleration": "0",
"travel_jerk": "12",
"travel_speed": "250",
"travel_speed_z": "0",
"tree_support_adaptive_layer_height": "1",
"tree_support_angle_slow": "25",
"tree_support_auto_brim": "1",
"tree_support_branch_angle": "40",
"tree_support_branch_angle_organic": "40",
"tree_support_branch_diameter": "5",
"tree_support_branch_diameter_angle": "5",
"tree_support_branch_diameter_double_wall": "3",
"tree_support_branch_diameter_organic": "2",
"tree_support_branch_distance": "5",
"tree_support_branch_distance_organic": "1",
"tree_support_brim_width": "3",
"tree_support_tip_diameter": "0.8",
"tree_support_top_rate": "30%",
"tree_support_wall_count": "0",
"version": "2.0.2.0",
"wall_direction": "auto",
"wall_distribution_count": "1",
"wall_filament": "1",
"wall_generator": "arachne",
"wall_loops": "3",
"wall_sequence": "inner wall/outer wall",
"wall_transition_angle": "10",
"wall_transition_filter_deviation": "25%",
"wall_transition_length": "100%",
"wipe_before_external_loop": "0",
"wipe_on_loops": "0",
"wipe_speed": "80%",
"wipe_tower_bridging": "10",
"wipe_tower_cone_angle": "0",
"wipe_tower_extra_spacing": "100%",
"wipe_tower_extruder": "0",
"wipe_tower_no_sparse_layers": "0",
"wipe_tower_rotation_angle": "0",
"wiping_volumes_extruders": [
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70"
],
"xy_contour_compensation": "0",
"xy_hole_compensation": "0",
"top_bottom_infill_wall_overlap":"15%"
}

285
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,285 @@
{
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"accel_to_decel_enable": "1",
"accel_to_decel_factor": "50%",
"alternate_extra_wall": "0",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bottom_solid_infill_flow_ratio": "1",
"bottom_surface_pattern": "monotonic",
"bridge_acceleration": "50%",
"bridge_angle": "0",
"bridge_density": "100%",
"bridge_flow": "1",
"bridge_no_support": "0",
"bridge_speed": "50",
"brim_ears_detection_length": "1",
"brim_ears_max_angle": "125",
"brim_object_gap": "0",
"brim_type": "auto_brim",
"brim_width": "0",
"compatible_printers": [
"Artillery Sidewinder X3 Pro 0.4 nozzle"
],
"compatible_printers_condition": "",
"counterbore_hole_bridging": "none",
"default_acceleration": "3000",
"default_jerk": "0",
"detect_narrow_internal_solid_infill": "1",
"detect_overhang_wall": "1",
"detect_thin_wall": "1",
"dont_filter_internal_bridges": "disabled",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"elefant_foot_compensation_layers": "1",
"enable_arc_fitting": "0",
"enable_overhang_speed": "1",
"enable_prime_tower": "0",
"enable_support": "0",
"enforce_support_layers": "0",
"ensure_vertical_shell_thickness": "ensure_all",
"exclude_object": "0",
"extra_perimeters_on_overhangs": "0",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_X3Pro.gcode",
"filter_out_gap_fill": "0",
"flush_into_infill": "0",
"flush_into_objects": "0",
"flush_into_support": "1",
"fuzzy_skin": "none",
"fuzzy_skin_first_layer": "0",
"fuzzy_skin_point_distance": "0.8",
"fuzzy_skin_thickness": "0.3",
"gap_fill_target": "everywhere",
"gap_infill_speed": "30",
"gcode_add_line_number": "0",
"gcode_comments": "0",
"gcode_label_objects": "0",
"hole_to_polyhole": "0",
"hole_to_polyhole_threshold": "0.01",
"hole_to_polyhole_twisted": "1",
"independent_support_layer_height": "1",
"infill_anchor": "400%",
"infill_anchor_max": "20",
"infill_combination": "0",
"infill_direction": "45",
"infill_jerk": "9",
"infill_wall_overlap": "15%",
"initial_layer_acceleration": "500",
"initial_layer_infill_speed": "30",
"initial_layer_jerk": "9",
"initial_layer_line_width": "0.5",
"initial_layer_min_bead_width": "85%",
"initial_layer_print_height": "0.25",
"initial_layer_speed": "30",
"initial_layer_travel_speed": "100%",
"inner_wall_acceleration": "3000",
"inner_wall_jerk": "9",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "100",
"interface_shells": "0",
"internal_bridge_flow": "1",
"internal_bridge_speed": "150%",
"internal_solid_infill_acceleration": "100%",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_pattern": "monotonic",
"internal_solid_infill_speed": "150",
"ironing_angle": "-1",
"ironing_flow": "15%",
"ironing_pattern": "zig-zag",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"is_custom_defined": "0",
"is_infill_first": "0",
"layer_height": "0.2",
"line_width": "0.42",
"make_overhang_printable": "0",
"make_overhang_printable_angle": "55",
"make_overhang_printable_hole_size": "0",
"max_bridge_length": "10",
"max_travel_detour_distance": "0",
"max_volumetric_extrusion_rate_slope": "0",
"max_volumetric_extrusion_rate_slope_segment_length": "3",
"min_bead_width": "85%",
"min_feature_size": "25%",
"min_length_factor": "0.5",
"min_width_top_surface": "300%",
"minimum_sparse_infill_area": "10",
"mmu_segmented_region_interlocking_depth": "0",
"mmu_segmented_region_max_width": "0",
"name": "0.20mm Standard @Artillery X3Pro 0.4 nozzle",
"notes": "",
"only_one_wall_first_layer": "0",
"only_one_wall_top": "0",
"ooze_prevention": "0",
"outer_wall_acceleration": "1500",
"outer_wall_jerk": "9",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "60",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"overhang_reverse": "0",
"overhang_reverse_internal_only": "0",
"overhang_reverse_threshold": "50%",
"overhang_speed_classic": "0",
"post_process": [],
"precise_outer_wall": "0",
"prime_tower_brim_width": "3",
"prime_tower_width": "60",
"prime_volume": "45",
"print_flow_ratio": "1",
"print_order": "default",
"print_sequence": "by layer",
"print_settings_id": "0.20mm Standard @Artillery X3Pro 0.4 nozzle",
"raft_contact_distance": "0.1",
"raft_expansion": "1.5",
"raft_first_layer_density": "90%",
"raft_first_layer_expansion": "2",
"raft_layers": "0",
"reduce_crossing_wall": "0",
"reduce_infill_retraction": "1",
"resolution": "0.012",
"role_based_wipe_speed": "1",
"scarf_angle_threshold": "155",
"scarf_joint_flow_ratio": "1",
"scarf_joint_speed": "100%",
"scarf_overhang_threshold": "40%",
"seam_gap": "10%",
"seam_position": "aligned",
"seam_slope_conditional": "0",
"seam_slope_entire_loop": "0",
"seam_slope_inner_walls": "0",
"seam_slope_min_length": "20",
"seam_slope_start_height": "0",
"seam_slope_steps": "10",
"seam_slope_type": "none",
"single_extruder_multi_material_priming": "1",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "0",
"skirt_speed": "50",
"slice_closing_radius": "0.049",
"slicing_mode": "regular",
"slow_down_layers": "0",
"slowdown_for_curled_perimeters": "1",
"small_area_infill_flow_compensation": "0",
"small_area_infill_flow_compensation_model": [
"0,0",
"\n0.2,0.4444",
"\n0.4,0.6145",
"\n0.6,0.7059",
"\n0.8,0.7619",
"\n1.5,0.8571",
"\n2,0.8889",
"\n3,0.9231",
"\n5,0.9520",
"\n10,1"
],
"small_perimeter_speed": "50%",
"small_perimeter_threshold": "0",
"solid_infill_filament": "1",
"sparse_infill_acceleration": "100%",
"sparse_infill_density": "15%",
"sparse_infill_filament": "1",
"sparse_infill_line_width": "0.45",
"sparse_infill_pattern": "crosshatch",
"sparse_infill_speed": "150",
"spiral_mode": "0",
"spiral_mode_max_xy_smoothing": "200%",
"spiral_mode_smooth": "0",
"staggered_inner_seams": "0",
"standby_temperature_delta": "-5",
"support_angle": "0",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_bottom_interface_spacing": "0.5",
"support_bottom_z_distance": "0.2",
"support_critical_regions_only": "0",
"support_expansion": "0",
"support_filament": "0",
"support_interface_bottom_layers": "-1",
"support_interface_filament": "0",
"support_interface_loop_pattern": "1",
"support_interface_not_for_body": "1",
"support_interface_pattern": "auto",
"support_interface_spacing": "1",
"support_interface_speed": "80",
"support_interface_top_layers": "3",
"support_line_width": "0.42",
"support_object_xy_distance": "0.35",
"support_on_build_plate_only": "0",
"support_remove_small_overhang": "1",
"support_speed": "60",
"support_style": "grid",
"support_threshold_angle": "30",
"support_top_z_distance": "0.2",
"support_type": "normal(auto)",
"thick_bridges": "0",
"thick_internal_bridges": "1",
"timelapse_type": "0",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"top_solid_infill_flow_ratio": "1",
"top_surface_acceleration": "500",
"top_surface_jerk": "9",
"top_surface_line_width": "0.42",
"top_surface_pattern": "monotonic",
"top_surface_speed": "30",
"travel_acceleration": "3000",
"travel_jerk": "12",
"travel_speed": "300",
"travel_speed_z": "0",
"tree_support_adaptive_layer_height": "1",
"tree_support_angle_slow": "25",
"tree_support_auto_brim": "1",
"tree_support_branch_angle": "40",
"tree_support_branch_angle_organic": "40",
"tree_support_branch_diameter": "5",
"tree_support_branch_diameter_angle": "5",
"tree_support_branch_diameter_double_wall": "3",
"tree_support_branch_diameter_organic": "2",
"tree_support_branch_distance": "5",
"tree_support_branch_distance_organic": "1",
"tree_support_brim_width": "3",
"tree_support_tip_diameter": "0.8",
"tree_support_top_rate": "30%",
"tree_support_wall_count": "0",
"version": "2.0.2.0",
"wall_direction": "auto",
"wall_distribution_count": "1",
"wall_filament": "1",
"wall_generator": "arachne",
"wall_loops": "3",
"wall_sequence": "outer wall/inner wall",
"wall_transition_angle": "10",
"wall_transition_filter_deviation": "25%",
"wall_transition_length": "100%",
"wipe_before_external_loop": "0",
"wipe_on_loops": "0",
"wipe_speed": "80%",
"wipe_tower_bridging": "10",
"wipe_tower_cone_angle": "0",
"wipe_tower_extra_spacing": "100%",
"wipe_tower_extruder": "0",
"wipe_tower_no_sparse_layers": "0",
"wipe_tower_rotation_angle": "0",
"wiping_volumes_extruders": [
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70"
],
"xy_contour_compensation": "0",
"xy_hole_compensation": "0",
"top_bottom_infill_wall_overlap":"15%"
}

285
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,285 @@
{
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"accel_to_decel_enable": "1",
"accel_to_decel_factor": "50%",
"alternate_extra_wall": "0",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bottom_solid_infill_flow_ratio": "1",
"bottom_surface_pattern": "monotonic",
"bridge_acceleration": "50%",
"bridge_angle": "0",
"bridge_density": "100%",
"bridge_flow": "1",
"bridge_no_support": "0",
"bridge_speed": "70",
"brim_ears_detection_length": "1",
"brim_ears_max_angle": "125",
"brim_object_gap": "0",
"brim_type": "auto_brim",
"brim_width": "0",
"compatible_printers": [
"Artillery Sidewinder X4 Plus 0.4 nozzle"
],
"compatible_printers_condition": "",
"counterbore_hole_bridging": "none",
"default_acceleration": "5000",
"default_jerk": "0",
"detect_narrow_internal_solid_infill": "1",
"detect_overhang_wall": "1",
"detect_thin_wall": "1",
"dont_filter_internal_bridges": "disabled",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"elefant_foot_compensation_layers": "1",
"enable_arc_fitting": "0",
"enable_overhang_speed": "1",
"enable_prime_tower": "0",
"enable_support": "0",
"enforce_support_layers": "0",
"ensure_vertical_shell_thickness": "ensure_all",
"exclude_object": "0",
"extra_perimeters_on_overhangs": "0",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_X4Plus.gcode",
"filter_out_gap_fill": "0",
"flush_into_infill": "0",
"flush_into_objects": "0",
"flush_into_support": "1",
"fuzzy_skin": "none",
"fuzzy_skin_first_layer": "0",
"fuzzy_skin_point_distance": "0.8",
"fuzzy_skin_thickness": "0.3",
"gap_fill_target": "everywhere",
"gap_infill_speed": "30",
"gcode_add_line_number": "0",
"gcode_comments": "0",
"gcode_label_objects": "0",
"hole_to_polyhole": "0",
"hole_to_polyhole_threshold": "0.01",
"hole_to_polyhole_twisted": "1",
"independent_support_layer_height": "1",
"infill_anchor": "400%",
"infill_anchor_max": "20",
"infill_combination": "0",
"infill_direction": "45",
"infill_jerk": "9",
"infill_wall_overlap": "15%",
"initial_layer_acceleration": "0",
"initial_layer_infill_speed": "30",
"initial_layer_jerk": "9",
"initial_layer_line_width": "0.5",
"initial_layer_min_bead_width": "85%",
"initial_layer_print_height": "0.2",
"initial_layer_speed": "30",
"initial_layer_travel_speed": "100%",
"inner_wall_acceleration": "0",
"inner_wall_jerk": "9",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "200",
"interface_shells": "0",
"internal_bridge_flow": "1",
"internal_bridge_speed": "150%",
"internal_solid_infill_acceleration": "100%",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_pattern": "monotonic",
"internal_solid_infill_speed": "300",
"ironing_angle": "-1",
"ironing_flow": "15%",
"ironing_pattern": "zig-zag",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"is_custom_defined": "0",
"is_infill_first": "0",
"layer_height": "0.2",
"line_width": "0.42",
"make_overhang_printable": "0",
"make_overhang_printable_angle": "55",
"make_overhang_printable_hole_size": "0",
"max_bridge_length": "10",
"max_travel_detour_distance": "0",
"max_volumetric_extrusion_rate_slope": "0",
"max_volumetric_extrusion_rate_slope_segment_length": "3",
"min_bead_width": "85%",
"min_feature_size": "25%",
"min_length_factor": "0.5",
"min_width_top_surface": "300%",
"minimum_sparse_infill_area": "10",
"mmu_segmented_region_interlocking_depth": "0",
"mmu_segmented_region_max_width": "0",
"name": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"notes": "",
"only_one_wall_first_layer": "0",
"only_one_wall_top": "0",
"ooze_prevention": "0",
"outer_wall_acceleration": "5000",
"outer_wall_jerk": "9",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "100",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"overhang_reverse": "0",
"overhang_reverse_internal_only": "0",
"overhang_reverse_threshold": "50%",
"overhang_speed_classic": "0",
"post_process": [],
"precise_outer_wall": "0",
"prime_tower_brim_width": "3",
"prime_tower_width": "60",
"prime_volume": "45",
"print_flow_ratio": "1",
"print_order": "default",
"print_sequence": "by layer",
"print_settings_id": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"raft_contact_distance": "0.1",
"raft_expansion": "1.5",
"raft_first_layer_density": "90%",
"raft_first_layer_expansion": "2",
"raft_layers": "0",
"reduce_crossing_wall": "0",
"reduce_infill_retraction": "1",
"resolution": "0.012",
"role_based_wipe_speed": "1",
"scarf_angle_threshold": "155",
"scarf_joint_flow_ratio": "1",
"scarf_joint_speed": "100%",
"scarf_overhang_threshold": "40%",
"seam_gap": "10%",
"seam_position": "aligned",
"seam_slope_conditional": "0",
"seam_slope_entire_loop": "0",
"seam_slope_inner_walls": "0",
"seam_slope_min_length": "20",
"seam_slope_start_height": "0",
"seam_slope_steps": "10",
"seam_slope_type": "none",
"single_extruder_multi_material_priming": "1",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "0",
"skirt_speed": "50",
"slice_closing_radius": "0.049",
"slicing_mode": "regular",
"slow_down_layers": "0",
"slowdown_for_curled_perimeters": "0",
"small_area_infill_flow_compensation": "0",
"small_area_infill_flow_compensation_model": [
"0,0",
"\n0.2,0.4444",
"\n0.4,0.6145",
"\n0.6,0.7059",
"\n0.8,0.7619",
"\n1.5,0.8571",
"\n2,0.8889",
"\n3,0.9231",
"\n5,0.9520",
"\n10,1"
],
"small_perimeter_speed": "50%",
"small_perimeter_threshold": "0",
"solid_infill_filament": "1",
"sparse_infill_acceleration": "100%",
"sparse_infill_density": "15%",
"sparse_infill_filament": "1",
"sparse_infill_line_width": "0.45",
"sparse_infill_pattern": "crosshatch",
"sparse_infill_speed": "200",
"spiral_mode": "0",
"spiral_mode_max_xy_smoothing": "200%",
"spiral_mode_smooth": "0",
"staggered_inner_seams": "0",
"standby_temperature_delta": "-5",
"support_angle": "0",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_bottom_interface_spacing": "0.5",
"support_bottom_z_distance": "0.2",
"support_critical_regions_only": "0",
"support_expansion": "0",
"support_filament": "0",
"support_interface_bottom_layers": "-1",
"support_interface_filament": "0",
"support_interface_loop_pattern": "1",
"support_interface_not_for_body": "1",
"support_interface_pattern": "auto",
"support_interface_spacing": "1",
"support_interface_speed": "80",
"support_interface_top_layers": "3",
"support_line_width": "0.42",
"support_object_xy_distance": "0.35",
"support_on_build_plate_only": "0",
"support_remove_small_overhang": "1",
"support_speed": "60",
"support_style": "grid",
"support_threshold_angle": "30",
"support_top_z_distance": "0.2",
"support_type": "normal(auto)",
"thick_bridges": "0",
"thick_internal_bridges": "1",
"timelapse_type": "0",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"top_solid_infill_flow_ratio": "1",
"top_surface_acceleration": "0",
"top_surface_jerk": "9",
"top_surface_line_width": "0.42",
"top_surface_pattern": "monotonic",
"top_surface_speed": "100",
"travel_acceleration": "0",
"travel_jerk": "12",
"travel_speed": "300",
"travel_speed_z": "0",
"tree_support_adaptive_layer_height": "1",
"tree_support_angle_slow": "25",
"tree_support_auto_brim": "1",
"tree_support_branch_angle": "40",
"tree_support_branch_angle_organic": "40",
"tree_support_branch_diameter": "5",
"tree_support_branch_diameter_angle": "5",
"tree_support_branch_diameter_double_wall": "3",
"tree_support_branch_diameter_organic": "2",
"tree_support_branch_distance": "5",
"tree_support_branch_distance_organic": "1",
"tree_support_brim_width": "3",
"tree_support_tip_diameter": "0.8",
"tree_support_top_rate": "30%",
"tree_support_wall_count": "0",
"version": "2.0.2.0",
"wall_direction": "auto",
"wall_distribution_count": "1",
"wall_filament": "1",
"wall_generator": "arachne",
"wall_loops": "2",
"wall_sequence": "inner wall/outer wall",
"wall_transition_angle": "10",
"wall_transition_filter_deviation": "25%",
"wall_transition_length": "100%",
"wipe_before_external_loop": "0",
"wipe_on_loops": "0",
"wipe_speed": "80%",
"wipe_tower_bridging": "10",
"wipe_tower_cone_angle": "0",
"wipe_tower_extra_spacing": "100%",
"wipe_tower_extruder": "0",
"wipe_tower_no_sparse_layers": "0",
"wipe_tower_rotation_angle": "0",
"wiping_volumes_extruders": [
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70"
],
"xy_contour_compensation": "0",
"xy_hole_compensation": "0",
"top_bottom_infill_wall_overlap":"15%"
}

5
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.info Normal file
View File

@@ -0,0 +1,5 @@
sync_info = update
user_id =
setting_id =
base_id =
updated_time = 0

286
OrcaSlicer/system/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,286 @@
{
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"accel_to_decel_enable": "1",
"accel_to_decel_factor": "50%",
"alternate_extra_wall": "0",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bottom_solid_infill_flow_ratio": "1",
"bottom_surface_pattern": "monotonic",
"bridge_acceleration": "50%",
"bridge_angle": "0",
"bridge_density": "100%",
"bridge_flow": "1",
"bridge_no_support": "0",
"bridge_speed": "70",
"brim_ears_detection_length": "1",
"brim_ears_max_angle": "125",
"brim_object_gap": "0",
"brim_type": "auto_brim",
"brim_width": "0",
"compatible_printers": [
"Artillery Sidewinder X4 Pro 0.4 nozzle"
],
"compatible_printers_condition": "",
"counterbore_hole_bridging": "none",
"default_acceleration": "5000",
"default_jerk": "0",
"detect_narrow_internal_solid_infill": "1",
"detect_overhang_wall": "1",
"detect_thin_wall": "1",
"dont_filter_internal_bridges": "disabled",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"elefant_foot_compensation_layers": "1",
"enable_arc_fitting": "0",
"enable_overhang_speed": "1",
"enable_prime_tower": "0",
"enable_support": "0",
"enforce_support_layers": "0",
"ensure_vertical_shell_thickness": "ensure_all",
"exclude_object": "0",
"extra_perimeters_on_overhangs": "0",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_X4Pro.gcode",
"filter_out_gap_fill": "0",
"flush_into_infill": "0",
"flush_into_objects": "0",
"flush_into_support": "1",
"fuzzy_skin": "none",
"fuzzy_skin_first_layer": "0",
"fuzzy_skin_point_distance": "0.8",
"fuzzy_skin_thickness": "0.3",
"gap_fill_target": "everywhere",
"gap_infill_speed": "30",
"gcode_add_line_number": "0",
"gcode_comments": "0",
"gcode_label_objects": "0",
"hole_to_polyhole": "0",
"hole_to_polyhole_threshold": "0.01",
"hole_to_polyhole_twisted": "1",
"independent_support_layer_height": "1",
"infill_anchor": "400%",
"infill_anchor_max": "20",
"infill_combination": "0",
"infill_direction": "45",
"infill_jerk": "9",
"infill_wall_overlap": "15%",
"initial_layer_acceleration": "0",
"initial_layer_infill_speed": "30",
"initial_layer_jerk": "9",
"initial_layer_line_width": "0.5",
"initial_layer_min_bead_width": "85%",
"initial_layer_print_height": "0.2",
"initial_layer_speed": "30",
"initial_layer_travel_speed": "100%",
"inner_wall_acceleration": "0",
"inner_wall_jerk": "9",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "200",
"interface_shells": "0",
"internal_bridge_flow": "1",
"internal_bridge_speed": "150%",
"internal_solid_infill_acceleration": "100%",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_pattern": "monotonic",
"internal_solid_infill_speed": "300",
"ironing_angle": "-1",
"ironing_flow": "15%",
"ironing_pattern": "zig-zag",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"is_custom_defined": "0",
"is_infill_first": "0",
"layer_height": "0.2",
"line_width": "0.42",
"make_overhang_printable": "0",
"make_overhang_printable_angle": "55",
"make_overhang_printable_hole_size": "0",
"max_bridge_length": "10",
"max_travel_detour_distance": "0",
"max_volumetric_extrusion_rate_slope": "0",
"max_volumetric_extrusion_rate_slope_segment_length": "3",
"min_bead_width": "85%",
"min_feature_size": "25%",
"min_length_factor": "0.5",
"min_width_top_surface": "300%",
"minimum_sparse_infill_area": "10",
"mmu_segmented_region_interlocking_depth": "0",
"mmu_segmented_region_max_width": "0",
"name": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"notes": "",
"only_one_wall_first_layer": "0",
"only_one_wall_top": "0",
"ooze_prevention": "0",
"outer_wall_acceleration": "5000",
"outer_wall_jerk": "9",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "100",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"overhang_reverse": "0",
"overhang_reverse_internal_only": "0",
"overhang_reverse_threshold": "50%",
"overhang_speed_classic": "0",
"post_process": [],
"precise_outer_wall": "0",
"prime_tower_brim_width": "3",
"prime_tower_width": "60",
"prime_volume": "45",
"print_flow_ratio": "1",
"print_order": "default",
"print_sequence": "by layer",
"print_settings_id": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"raft_contact_distance": "0.1",
"raft_expansion": "1.5",
"raft_first_layer_density": "90%",
"raft_first_layer_expansion": "2",
"raft_layers": "0",
"reduce_crossing_wall": "0",
"reduce_infill_retraction": "1",
"resolution": "0.012",
"role_based_wipe_speed": "1",
"scarf_angle_threshold": "155",
"scarf_joint_flow_ratio": "1",
"scarf_joint_speed": "100%",
"scarf_overhang_threshold": "40%",
"seam_gap": "10%",
"seam_position": "aligned",
"seam_slope_conditional": "0",
"seam_slope_entire_loop": "0",
"seam_slope_inner_walls": "0",
"seam_slope_min_length": "20",
"seam_slope_start_height": "0",
"seam_slope_steps": "10",
"seam_slope_type": "none",
"single_extruder_multi_material_priming": "1",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "0",
"skirt_speed": "50",
"slice_closing_radius": "0.049",
"slicing_mode": "regular",
"slow_down_layers": "0",
"slowdown_for_curled_perimeters": "0",
"small_area_infill_flow_compensation": "0",
"small_area_infill_flow_compensation_model": [
"0,0",
"\n0.2,0.4444",
"\n0.4,0.6145",
"\n0.6,0.7059",
"\n0.8,0.7619",
"\n1.5,0.8571",
"\n2,0.8889",
"\n3,0.9231",
"\n5,0.9520",
"\n10,1"
],
"small_perimeter_speed": "50%",
"small_perimeter_threshold": "0",
"solid_infill_filament": "1",
"sparse_infill_acceleration": "100%",
"sparse_infill_density": "15%",
"sparse_infill_filament": "1",
"sparse_infill_line_width": "0.45",
"sparse_infill_pattern": "crosshatch",
"sparse_infill_speed": "200",
"spiral_mode": "0",
"spiral_mode_max_xy_smoothing": "200%",
"spiral_mode_smooth": "0",
"staggered_inner_seams": "0",
"standby_temperature_delta": "-5",
"support_angle": "0",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_bottom_interface_spacing": "0.5",
"support_bottom_z_distance": "0.2",
"support_critical_regions_only": "0",
"support_expansion": "0",
"support_filament": "0",
"support_interface_bottom_layers": "-1",
"support_interface_filament": "0",
"support_interface_loop_pattern": "1",
"support_interface_not_for_body": "1",
"support_interface_pattern": "auto",
"support_interface_spacing": "1",
"support_interface_speed": "80",
"support_interface_top_layers": "3",
"support_line_width": "0.42",
"support_object_xy_distance": "0.35",
"support_on_build_plate_only": "0",
"support_remove_small_overhang": "1",
"support_speed": "60",
"support_style": "grid",
"support_threshold_angle": "30",
"support_top_z_distance": "0.2",
"support_type": "normal(auto)",
"thick_bridges": "0",
"thick_internal_bridges": "1",
"timelapse_type": "0",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"top_solid_infill_flow_ratio": "1",
"top_surface_acceleration": "0",
"top_surface_jerk": "9",
"top_surface_line_width": "0.42",
"top_surface_pattern": "monotonic",
"top_surface_speed": "100",
"travel_acceleration": "0",
"travel_jerk": "12",
"travel_speed": "300",
"travel_speed_z": "0",
"tree_support_adaptive_layer_height": "1",
"tree_support_angle_slow": "25",
"tree_support_auto_brim": "1",
"tree_support_branch_angle": "40",
"tree_support_branch_angle_organic": "40",
"tree_support_branch_diameter": "5",
"tree_support_branch_diameter_angle": "5",
"tree_support_branch_diameter_double_wall": "3",
"tree_support_branch_diameter_organic": "2",
"tree_support_branch_distance": "5",
"tree_support_branch_distance_organic": "1",
"tree_support_brim_width": "3",
"tree_support_tip_diameter": "0.8",
"tree_support_top_rate": "30%",
"tree_support_wall_count": "0",
"version": "2.0.2.0",
"wall_direction": "auto",
"wall_distribution_count": "1",
"wall_filament": "1",
"wall_generator": "arachne",
"wall_loops": "2",
"wall_sequence": "inner wall/outer wall",
"wall_transition_angle": "10",
"wall_transition_filter_deviation": "25%",
"wall_transition_length": "100%",
"wipe_before_external_loop": "0",
"wipe_on_loops": "0",
"wipe_speed": "80%",
"wipe_tower_bridging": "10",
"wipe_tower_cone_angle": "0",
"wipe_tower_extra_spacing": "100%",
"wipe_tower_extruder": "0",
"wipe_tower_no_sparse_layers": "0",
"wipe_tower_rotation_angle": "0",
"wiping_volumes_extruders": [
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70"
],
"xy_contour_compensation": "0",
"xy_hole_compensation": "0",
"top_bottom_infill_wall_overlap":"15%"
}

10
OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,10 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"name": "0.20mm Strength @Artillery X4Plus 0.4 nozzle",
"outer_wall_speed": "60",
"print_settings_id": "0.20mm Strength @Artillery X4Plus 0.4 nozzle",
"version": "2.0.2.0",
"wall_loops": "6"
}

10
OrcaSlicer/system/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,10 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"name": "0.20mm Strength @Artillery X4Pro 0.4 nozzle",
"outer_wall_speed": "60",
"print_settings_id": "0.20mm Strength @Artillery X4Pro 0.4 nozzle",
"version": "2.0.2.0",
"wall_loops": "6"
}

108
OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery Hornet.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.24mm Draft @Artillery Hornet",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.24",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "500",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.24",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "40",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Hornet 0.4 nozzle"
]
}

108
OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X1.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.24mm Draft @Artillery X1",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.24",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "3",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "500",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.24",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "40",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Sidewinder X1 0.4 nozzle"
]
}

11
OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,11 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"initial_layer_print_height": "0.2",
"layer_height": "0.24",
"name": "0.24mm Draft @Artillery X4Plus 0.4 nozzle",
"outer_wall_speed": "120",
"print_settings_id": "0.24mm Draft @Artillery X4Plus 0.4 nozzle",
"version": "2.0.2.0"
}

10
OrcaSlicer/system/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,10 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"initial_layer_print_height": "0.2",
"layer_height": "0.24",
"name": "0.24mm Draft @Artillery X4Pro 0.4 nozzle",
"print_settings_id": "0.24mm Draft @Artillery X4Pro 0.4 nozzle",
"version": "2.0.2.0"
}

108
OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius Pro.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.25mm Draft @Artillery Genius Pro",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.25",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "2",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "0",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0.15",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "2",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.25",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "60",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "2",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "110",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Genius Pro 0.4 nozzle"
]
}

108
OrcaSlicer/system/Artillery/process/0.25mm Draft @Artillery Genius.json Normal file
View File

@@ -0,0 +1,108 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.25mm Draft @Artillery Genius",
"from": "system",
"instantiation": "true",
"inherits": "fdm_process_common",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"layer_height": "0.25",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "7",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "70",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "0",
"top_surface_acceleration": "0",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.5",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_acceleration": "0",
"travel_acceleration": "0",
"inner_wall_acceleration": "0",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.25",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "15%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "4",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "3",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.25",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "1",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "1",
"support_interface_speed": "100%",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "60",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "35%",
"initial_layer_infill_speed": "35%",
"outer_wall_speed": "60",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "30",
"top_surface_speed": "30",
"gap_infill_speed": "30",
"sparse_infill_speed": "60",
"travel_speed": "110",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"compatible_printers": [
"Artillery Genius 0.4 nozzle"
]
}

11
OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,11 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Plus 0.4 nozzle",
"initial_layer_print_height": "0.2",
"layer_height": "0.28",
"name": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle",
"outer_wall_speed": "120",
"print_settings_id": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle",
"version": "2.0.2.0"
}

10
OrcaSlicer/system/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,10 @@
{
"from": "system",
"instantiation": "true",
"inherits": "0.20mm Standard @Artillery X4Pro 0.4 nozzle",
"initial_layer_print_height": "0.2",
"layer_height": "0.28",
"name": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle",
"print_settings_id": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle",
"version": "2.0.2.0"
}

107
OrcaSlicer/system/Artillery/process/fdm_process_common.json Normal file
View File

@@ -0,0 +1,107 @@
{
"type": "process",
"name": "fdm_process_common",
"from": "system",
"instantiation": "false",
"adaptive_layer_height": "0",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_thickness": "0",
"bridge_speed": "50",
"brim_width": "5",
"brim_object_gap": "0.1",
"compatible_printers": [],
"compatible_printers_condition": "",
"print_sequence": "by layer",
"default_acceleration": "1000",
"initial_layer_acceleration": "500",
"top_surface_acceleration": "800",
"travel_acceleration": "1000",
"inner_wall_acceleration": "900",
"outer_wall_acceleration": "700",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0.15",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.4",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "crosshatch",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.2",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "25%",
"interface_shells": "0",
"ironing_flow": "10%",
"ironing_spacing": "0.15",
"ironing_speed": "30",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "50",
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"wall_loops": "2",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "0",
"minimum_sparse_infill_area": "15",
"internal_solid_infill_line_width": "0.4",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"enable_support": "0",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.2",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "2",
"support_interface_bottom_layers": "2",
"support_interface_spacing": "0.5",
"support_interface_speed": "80",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_speed": "150",
"support_threshold_angle": "30",
"support_object_xy_distance": "0.35",
"tree_support_branch_angle": "30",
"tree_support_wall_count": "0",
"tree_support_with_infill": "0",
"detect_thin_wall": "0",
"top_surface_pattern": "monotonicline",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"layer_height": "0.2",
"bottom_shell_layers": "3",
"top_shell_layers": "4",
"bridge_flow": "1",
"initial_layer_speed": "45",
"initial_layer_infill_speed": "45",
"outer_wall_speed": "45",
"inner_wall_speed": "80",
"sparse_infill_speed": "150",
"internal_solid_infill_speed": "150",
"top_surface_speed": "50",
"gap_infill_speed": "30",
"travel_speed": "200",
"enable_arc_fitting": "0"
}