205 lines
7.4 KiB
Markdown
205 lines
7.4 KiB
Markdown
# Creality Ender 3
|
||
|
||
1. [Octoprint backup archive](#octoprint-backup-archive)
|
||
2. [Ultimaker Cura configuration](#ultimaker-cura-configuration)
|
||
3. [Print profiles](#print-profiles)
|
||
4. [Filament set up](#filament-set-up)
|
||
5. [Marlin custom firmware](#marlin-custom-firmware)
|
||
6. [3D printed custom parts](#3d-printed-custom-parts)
|
||
|
||
# Octoprint backup archive
|
||
|
||
[2024-02-08] [Ender3-backup-20240208-205005.zip](octoprint-cfg-bkp/Ender3-backup-20240208-205005.zip)
|
||
|
||
# Ultimaker Cura configuration
|
||
|
||
## Cura Printer configuration
|
||
|
||
| Printer | Extruder |
|
||
|---------|----------|
|
||
|  |  |
|
||
|
||
## Start G-code
|
||
|
||
```
|
||
; Octoprint's Octolapse plugin required G-code
|
||
; Script based on an original created by tjjfvi (https://github.com/tjjfvi)
|
||
; An up-to-date version of the tjjfvi's original script can be found
|
||
; here: https://csi.t6.fyi/
|
||
; Note - This script will only work in Cura V4.2 and above!
|
||
; --- Global Settings
|
||
; layer_height = {layer_height}
|
||
; smooth_spiralized_contours = {smooth_spiralized_contours}
|
||
; magic_mesh_surface_mode = {magic_mesh_surface_mode}
|
||
; machine_extruder_count = {machine_extruder_count}
|
||
; --- Single Extruder Settings
|
||
; speed_z_hop = {speed_z_hop}
|
||
; retraction_amount = {retraction_amount}
|
||
; retraction_hop = {retraction_hop}
|
||
; retraction_hop_enabled = {retraction_hop_enabled}
|
||
; retraction_enable = {retraction_enable}
|
||
; retraction_speed = {retraction_speed}
|
||
; retraction_retract_speed = {retraction_retract_speed}
|
||
; retraction_prime_speed = {retraction_prime_speed}
|
||
; speed_travel = {speed_travel}
|
||
|
||
; Ender 3 Custom Start G-code
|
||
G92 E0 ; Reset Extruder
|
||
G28 ; Home all axes
|
||
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
|
||
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
|
||
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
|
||
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
|
||
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
|
||
G92 E0 ; Reset Extruder
|
||
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
|
||
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
|
||
```
|
||
|
||
## End G-code
|
||
|
||
```
|
||
G91 ;Relative positioning
|
||
G1 E-2 F2700 ;Retract a bit
|
||
G1 E-2 Z0.2 F2400 ;Retract and raise Z
|
||
G1 X5 Y5 F3000 ;Wipe out
|
||
G1 Z10 ;Raise Z more
|
||
G90 ;Absolute positioning
|
||
|
||
G1 X0 Y{machine_depth} ;Present print
|
||
M106 S0 ;Turn-off fan
|
||
M104 S0 ;Turn-off hotend
|
||
M140 S0 ;Turn-off bed
|
||
|
||
M84 X Y E ;Disable all steppers but Z
|
||
```
|
||
|
||
# Print profiles
|
||
|
||
* [Standard Quality - Arc Welder](cura-profile/Ender3%20-%20Standard%20Quality%20-%20Arc%20Welder.curaprofile)
|
||
* [Low Quality - Arc Welder](cura-profile/Ender3%20-%20Low%20Quality%20-%20Arc%20Welder.curaprofile)
|
||
* [Super Quality - Arc Welder](cura-profile/Ender3%20-%20Super%20Quality%20-%20Arc%20Welder.curaprofile)
|
||
|
||
# Filament set up
|
||
## PLA
|
||
|
||
| Brand | Filament desc | Printing temp | Build Plate temp | Retractation Distance |
|
||
|-----------|---------------|---------------|------------------|-----------------------|
|
||
| Geeetech | Black | 210°C | 60°C | 0.75mm |
|
||
| Geeetech | Silk Silver | 210°C | 60°C | 0.75mm |
|
||
|
||
## PETG
|
||
|
||
| Brand | Filament desc | Printing temp | Build Plate temp | Retractation Distance |
|
||
|-----------|---------------|---------------|------------------|-----------------------|
|
||
| Geeetech | -- | -- | -- | -- |
|
||
|
||
|
||
## Activate button and led support
|
||
|
||
### Full tutorial
|
||
|
||
[Raspberry Pi Power-Up and Shutdown with a Physical Button](https://embeddedcomputing.com/technology/open-source/development-kits/raspberry-pi-power-up-and-shutdown-with-a-physical-button)
|
||
|
||
|
||
### TL;DR
|
||
|
||
#### Add button support
|
||
|
||
1. Edit `/boot/config.txt` file.
|
||
2. Add line ` dtoverlay=gpio-shutdown`.
|
||
|
||
Final result:
|
||
```
|
||
[...]
|
||
|
||
[all]
|
||
# enable raspicam
|
||
start_x=1
|
||
gpu_mem=128
|
||
|
||
# Simple button on/off
|
||
dtoverlay=gpio-shutdown
|
||
```
|
||
|
||
#### Add LED support
|
||
|
||
1. Edit crontab
|
||
```
|
||
#> crontab -e
|
||
```
|
||
|
||
|
||
2. Add the line
|
||
```
|
||
@reboot raspi-gpio set 4 op dh
|
||
```
|
||
|
||
Final result:
|
||
```
|
||
# Edit this file to introduce tasks to be run by cron.
|
||
#
|
||
# Each task to run has to be defined through a single line
|
||
# indicating with different fields when the task will be run
|
||
# and what command to run for the task
|
||
#
|
||
# To define the time you can provide concrete values for
|
||
# minute (m), hour (h), day of month (dom), month (mon),
|
||
# and day of week (dow) or use '*' in these fields (for 'any').
|
||
#
|
||
# Notice that tasks will be started based on the cron's system
|
||
# daemon's notion of time and timezones.
|
||
#
|
||
# Output of the crontab jobs (including errors) is sent through
|
||
# email to the user the crontab file belongs to (unless redirected).
|
||
#
|
||
# For example, you can run a backup of all your user accounts
|
||
# at 5 a.m every week with:
|
||
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
|
||
#
|
||
# For more information see the manual pages of crontab(5) and cron(8)
|
||
#
|
||
# m h dom mon dow command
|
||
@reboot raspi-gpio set 4 op dh
|
||
```
|
||
|
||
# Marlin custom firmware
|
||
|
||
## Installed firmware
|
||
|
||
- Currently used tag: [`2.1.2.4`](https://github.com/MarlinFirmware/Marlin/tree/2.1.2.4)
|
||
- Details: [Firmware sources and custom configuration](./Marlin-2.1.2.4/) (local repo)
|
||
- Last compilation date: `2024-10-10 @ 09:53`
|
||
|
||
## Useful resources
|
||
|
||
### Firmware configuration:
|
||
- [Marlin 2.0.x Firmware Guide for BTT SKR Mini E3 v2.0 Ender 3](https://wallabag.igox.org/view/202)
|
||
- [Marlin 2.0.8 guide - PID autotune](https://wallabag.igox.org/view/203)
|
||
- [Marlin 2.0.8 guide - Bed Leveling - BLTouch, Inductive Sensor](https://wallabag.igox.org/view/204)
|
||
|
||
### Theorical documentation:
|
||
- [[MARLIN] Déterminer les dimensions / positions de la zone d'impression de son imprimante (cartésienne / CoreXY)](https://web.archive.org/web/20241010080558/https://www.lesimprimantes3d.fr/forum/topic/47020-marlin-déterminer-les-dimensions-positions-de-la-zone-dimpression-de-son-imprimante-cartésienne-corexy/)
|
||
- [comprendre la zone de palpage avec un ABL afin de paramétrer son Marlin](https://www.lesimprimantes3d.fr/forum/topic/43747-quelques-éléments-pour-mieux-comprendre-la-zone-de-palpage-avec-un-abl-afin-de-paramétrer-son-marlin/)
|
||
|
||
### Printer calibration:
|
||
|
||
Proceed with the different calibrations in the above order:
|
||
|
||
- [Marlin PID Auto-Tune - A Complete Guide](https://3dprintinggeek.com/marlin-pid-tuning/)
|
||
- :warning: First do the PID Auto-Tune for the **bed**. Else you may have false positive thermal runout.
|
||
- [Z-Offset Wizard – A Complete Guide](https://3dprintscape.com/z-offset-wizard-complete-guide/)
|
||
- Linear Advance:
|
||
- [Explanation](https://marlinfw.org/docs/features/lin_advance.html)
|
||
- [Pattern generation tool](https://marlinfw.org/tools/lin_advance/k-factor.html)
|
||
|
||
|
||
# 3D printed custom parts
|
||
|
||
| Item | 3D files | Final result |
|
||
|-------|-----------|--------------|
|
||
| _Raspberry Pi 4 / Octoprint case_ | [Printable](https://www.printables.com/model/1008828-creality-ender-3-station-lcd-raspberry-pi-4) |  |
|
||
| _Ender 3 PSU Support Bracket_ | [Thingiverse](https://www.thingiverse.com/thing:3444134) | |
|
||
| Aukey LM1 WebCam holder | N/A |  |
|
||
| PSU exhaust fan silencer | [Printable](https://www.printables.com/model/84197-60mm-exhaust-fan-silencer-flowmaster-psu-ender3nep/comments#preview.file.GpvjC) |  |
|
||
| Tool holder | N/A |  | |