Artillery SideWinder X2

Klipper Configuration

Klipper printer.cfg file
Klipper macros.cfg file

Ultimaker Cura configuration

Cura Printer configuration

Printer	Extruder

Start G-code

; Octolapse Plugin required parameters
; Script based on an original created by tjjfvi (https://github.com/tjjfvi)
; An up-to-date version of the tjjfvi's original script can be found
; here:  https://csi.t6.fyi/
; Note - This script will only work in Cura V4.2 and above!
; --- Global Settings
; layer_height = {layer_height}
; smooth_spiralized_contours = {smooth_spiralized_contours}
; magic_mesh_surface_mode = {magic_mesh_surface_mode}
; machine_extruder_count = {machine_extruder_count}
; --- Single Extruder Settings
; speed_z_hop = {speed_z_hop}
; retraction_amount = {retraction_amount}
; retraction_hop = {retraction_hop}
; retraction_hop_enabled = {retraction_hop_enabled}
; retraction_enable = {retraction_enable}
; retraction_speed = {retraction_speed}
; retraction_retract_speed = {retraction_retract_speed}
; retraction_prime_speed = {retraction_prime_speed}
; speed_travel = {speed_travel}

START_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0}

End G-code

END_PRINT

Print profiles

Filament set up

PLA

Brand	Filament desc	Printing temp	Build Plate temp	Retractation Distance
Geeetech	Black	205°C	60°C	0.75mm
Geeetech	Silk Silver	205°C	60°C	0.75mm

PETG

Brand	Filament desc	Printing temp	Build Plate temp	Retractation Distance
Geeetech	--	--	--	--

3.5 KiB Raw Blame History

Artillery SideWinder X2

Klipper Configuration

Ultimaker Cura configuration

Cura Printer configuration

Start G-code

End G-code

Print profiles

Filament set up

PLA

PETG

Resources / Links

3.5 KiB

Raw Blame History