of the Z coordinate, compiled in the ClipperLib_Z namespace.
Update of Lukas's new brim clipping:
All the brim contours are now clipped by the ClipperLib_Z library
in one shot.
to avoid layers thinner than min_layer height, and possibly due to
the fact, that empty support extrusions may get generated
for support layers with non-empty support polygons.
Fix of Empty layers detection added to GCode.cpp (6ab1cec)
Iterator loops replaced with C++11 loops.
Fixed clone() methods to return an ExtrusionEntity*.
PerimeterGenerator now uses move semantics on ExtrusionEntity a little
bit more.
The gap fill was disabled for zero infill.
Now the gap fill is enabled in between the perimeters, but disabled between
the inner-most perimeter and infill in case the infill is set to zero.
Also in case there are multiple infill regions inside a perimeter,
the mutliple infills are considered as non-zero if at least one infill
is non-zero, therefore the gap fill will be added inside the inner-most
perimeter.
The very first slicing step needs to be invalidated if support is
enabled or disabled while the soluble supports are configured,
as the bridging is disabled for soluble supports, while the bridging
is enabled with supports disabled.
Fix of "Bridging infill not connecting with infill set to 0%" #1301
Top, bottom and bridging areas are extended into infill as long
as the infill is not zero. If the infill is zero,
top, bottom and bridging areas wound not expand into these "void" areas.
With this commit, the top, bottom and bridging areas are allowed to expand
into the "void" areas as long as these "void" areas are supported below
with perimeters or some other non-empty infill, and slightly beyond
these supporting areas into the voids (currently hard coded to 1mm).
Fix of 2.1.0-rc: Loading MMU STL's results in object placement off the plater (#2868)
It has been broken with 9abef2241d
when trying to fix "Error on importing stl" #2813
Bumped up the version number to 2.0.0-rc.
Changed the location of profiles from PrusaSlicer-beta to PrusaSlicer
(that is the location for the released software).
Two bugs were fixed:
1) An entry in the GLVolume index was not always created when it should
have been.
2) Removing empty volumes from the list of GLVolumes did not update
the GLVolume index. This is an old issue, but it likely surfaced
now with the introduction of splitting the large GLVolumes
into multiple shorter ones.
The BackgroundSlicingProcess thread will now have the same stack size
allocated as the TBB worker threads:
4MB on 64bit systems and 2MB on 32bit systems.
When switching the languages, if the newly selected dictionary
is "compatible" with the system best language or user's locale,
then the system best language locale or user's locale is activated,
not the locale connected to the dictionary.
Introduced a new localization macro L_CONTEXT(string, context)
to define context dependent translations.
The only strings - "Top" and "Bottom" were already using context, but
until now the context had to be added to the PrusaSlicer.pot file
manually, while the context is being generated automatically now.
1) load object
2) Switch FFF to SLA or vice versa
3) Undo -> Crash
Fixed by deselecting the side panel before loading profiles
of the other technology.
as _set_current() tested for visibility of the window on the screen.
Improved memory management by:
1) Allocating small (around 3MB) vertex buffers to be sent to the GPU.
2) Passing the small vertex buffers to the GPU as quickly as possible.
A bit of copy / paste refactoring into common functions.
namely:
1) Whitespaces are allowed at the end of lines
2) A freeform is allowed after "endloop", "endfacet" and "endsolid", if separated
from the keyword by a whitespace. Some ASCII STL exporters likely add their
annotations in there.
Fixes "Error on importing stl" #2813
bubnikv