1) Let Clipper use int32_t for representing its coordinates. This
reduces memory and allows to skip conversion between Slic3r Polygon
and Clipper polygon.
2) Disable additional offset before executing the Clipper Offset algorithm.
We don't see any reason for that and it required 64bit Clipper coordinates,
which were disabled with 1).
Fixed some old support and infill issues.
Fixes support problem #4295
Fixes Parts of interface layer extends beyond supports and cannot be printed
Fixes support missing under horizontal overhang #6058
Fixes Slicer double-traces small sections of Rectilinear Supports, causes
Fixes plastic buildup and nozzle crashes #4951
Fixes Add "Angle Interface layers" #2969
expanded to a grid (the old way) vs.
snug (like the upstream Slic3r, Cura or Ideamaker).
Snug supports suffered from the degeneracies when merging overhang islands
over a large number of layers when projecting the support towers down.
We borrowed the idea & a bit of code from Cura by simplifying the support
polygons by closing the concave cracks, see the smooth_outward() function
and the MutablePolygon class.
Fixes Support problems with models with hole in the walls. #555
Fixes Support in the Air #740
Fixes [Bug] Supports generated beyond bed edges (X<0 and X>250) and where none are needed. #902
Fixes Unable to remove support material/can't change support "inflation distance" #2708
Fixes FR: support inflation and support conform to boundary #4783
Fixes Support blocker not working on this model #1346
Fixes Unnecessary support material #1993
Fixes support blocker enforcer issue #6240
interface layer was errorneously created.
Follow-up to 00db3dc41973b88e6ce0
referencing the issues fixed by the above commits:
Fixes Allow to disable raft under support structures. #3772
Fixes Separate counts for floor and roof support interface layers #4288
1) If "support on build plate only" is enabled, the support columns are
newly trimmed to not land on top of an object. However this may make
the column too small to be stable.
2) Support enforcers newly take precedence over "supports on build plate only"
and over "don't support bridges".
3) Some refactoring of the support generator code for clarity: Reduced
some of the worst spagetti offenders.
Fixes Support generated even if support on build only activated #915
Fixes Bug: supports on build plate only #1340
Fixes Bottom interface layer is not generated , support on build plate only. (long open defect) #4199
Fixes option "supports on build plate only" does not work #3980
Fixes No support interface layers generated #1997
Fixes Feature Request: Option to combine results of 'support from build plate only' and 'support enforcers only' #2801
Fixes Support interface isn't generated: build plate only + blocked by model + support enforcer #3831
Fixes Support Enforcer don't create interface layers #5748
Fixes Support Enforcers Don't Have Top Loops/Raft #1870
Fixes Don't cancel support enforcers with "don't support bridges" #5105
were missing abruptly when going down.
The issue was caused by extracting support areas from a grid and
filtering the extracted islands by intersection with the input islands.
Sometimes the input islands were a bit bigger than the extracted contour,
thus some of the samples of the input islands did not fall into
the extracted contour.
the Chromebooks share their file system to Linux using the 9p file
system, which does not support setting file ownership. Newly PrusaSlicer
will detect platform and it will not panick if copy_file() cannot set
file ownership after copying. It just logs the incident, and on
chromebooks the loglevel for that incident is "Info", not "Error".
Adjusted the full screen mode to contain menu bar.
Moved Platform.cpp/hpp to libslic3r
Namely, on ChromeOS virgl flips red/blue channels at least on some computers with multi-sampling enabled.
It seems it is sufficient to disable multi-sampling after the OpenGL context is created.
If the new support_material_bottom_interface_layers is left at default -1,
then support_material_interface_layers is used for both top and bottom
interface layers.
If support_material_interface_layers == 0, then neither top nor bottom
interface layers are being extruded.
This is more a workaround than a fix: Windows 10 3D model fixing API refuses
to load a zip64 encoded 3MF. We need to get in touch with Microsoft on that
issue, for now the 3MFs generated for the Windows 10 3D model fixing API
will be limited to 4GB. Saving a bigger 3MF will fail.
WIP: MutablePolygon - linked list based polygon implementation
allowing rapid insertion and removal of points.
WIP: porting smooth_outward() from Cura.
Reworked skirt generator to only generate skirt at non-empty layers
(layers that actually extruder object or support) and to respect minimum
layer height. Skirt generator stops at the first layer where those both
conditions cannot be met.
Disabled a suspicious piece of legacy code inherited from Slic3r,
which tries to fill in spots inside support interfaces. The code was
too aggressive and it was doing more harm than good.
New config field for switching the support interface pattern between
default (rectilinear for non-soluble interface, concentric for soluble interface),
explicit rectilinear and explicit concentric.
Also the config layer was reworked a bit to reduce some switch statements
on ConfigOptionEnum<> templates.
Fixes [Request] Add optional perimeter to raft #756
Fixes First support layer does not stick to bed #2101
New parameters raft_first_layer_density and raft_first_layer_expansion
to influence the 1st layer of raft or support.
Fixes Allow to disable raft under support structures. #3772
Fixes raft is larger than necessary #2568
Fixes Supports on the build plate should have a solid bottom interface for better adhesion #1165
Changed the 1st layer infill to rectilinear even for soluble materials.
Fixes first layer of support for multi filament support oddly spaced #1445
Fixes Full Soluble Materials interfacing into Models + Soluble material noise on Bed #684
Fixes Brim destroyed by support aka. Enable supports on top of brim #1156
Fixes Brim Priority/Support on Brim #713
Fixes Phantom Support columns interfere with brim #3396
Fixes false generation of brim when supports are used #3395
This is a work in progress, as the brim generator currently produces
different brim areas from what the support generator expects.
When projecting the horizontal or nearly horizontal support enforcers or blockers
into object layers, the projection may fall on a layer above or below the layer
where it should in case the nearly horizontal support enforcer or blocker
triangles are intersecting the slicing plane of one of the object layers.
Due to numerical issues, projection of the support blocker or
enforcer triangles may not fall to the same side of the slicing plane
as when slicing the object. To make the projection robust, horizontal triangles
are newly projected to both the layer below and above if they are close
to the object slicing plane.
Projection into a grid has been reworked to use the AGG rasterizer.
This fixes#5209 and #6067.
Also the raster is now being oversampled by maximum 8x8 samples
and the supports are only allowed to expand inside the cell.
This significantly reduces leakage of supports through object walls,
which fixes#5054.
under soluble supports. #5823
Implemented as a pull request #5903 by @spiky2021
and reworked.
commit c7993e619225553a2c4078787907b9ebbd9ac759
Author: spiky2021 <77010315+spiky2021@users.noreply.github.com>
Date: Thu Feb 11 12:39:25 2021 +0100
Base type interfaces for soluble interface supports
At the moment soluble support material adhesion is weak due to sparse support layers under soluble support layers. I reported as issue #5823 with pictures, as well.
I modified two methods to the SupportMaterial Class including their headers.
The new methods add two base type interface layers to the support structure, in case the extruders are different and soluble support is choosen.
Since it is conditionally activated, it in general doesn't need a GUI input. But a GUI option number of base interface layers may enabled users to adapt this feature to their needs.
This is my second try to provide a pull request on this topic. Reset my fromer repository, because first I merged this and all other changes to my master and couldn't provide separate pull request anymore.
Vojtech Bubnik