Fan speed will be ramped up linearly from zero at layer disable_fan_first_layers
to maximum at layer full_fan_speed_layer. full_fan_speed_layer will be
ignored if lower than disable_fan_first_layers, in which case
the fan will be running at maximum allowed speed at layer
disable_fan_first_layers + 1.;
WIP: The cooling PresetHints are likely not finalized yet.
2) Activating the physical_printer_settings_id when loading from 3MF, AMF, GCode.
The physical printer is only activated if it references the printer_settings_id
loaded from the same file.
3) When loading the presets from 3MF, AMF, GCode, the "external" profiles
are no more created for profiles which differ from the local profiles
the loaded profiles reference. Instead, the referenced profile is activated
and modified with the loaded preset. If the referenced profile does not
exist, but the profile refers to a system profile with the "inherits"
fileds, the system profile is loaded and modified instead.
This works for all profiles with the exception of multi-extruder
printer with multiple filament profiles modified. In that case
the first modified filament profile will be loaded as modified,
while the other modified profiles will be loaded as "external".
This should fix
Physical printer + 3mf file, wrong preset used to generate gcode #5178
and possibly
https://github.com/prusa3d/PrusaSlicer/issues/5272
1) The macro-processor sanitizes the source code line for invalid UTF-8
characters. Ideally these invalid characters would be replaced with ?,
they are just dropped as of now. Better than showing an empty string
when converting to wxString though.
2) G-code export collects full error message for 1st occurence of an error
for each custom G-code block.
3) The composite error message now displays the errors collected in 2).
4) The error window is now scaled bigger and the Slicer logo is smaller
if the text is to be rendered with monospaced font, as the monospaced
text will not be word wrapped.
Errors in the file output templates are reported in mono-spaced font,
so that the arrow character ^ is displayed at the right column
pointing to the offending spot.
In addition to an existing "layer_z" placeholder variable,
a new "max_layer_z" has been added to custom G-code sections accumulating
maximum of "layer_z" over the print. This value may be used for example
in the end G-code of a sequential print to lift the print head
up before travel over the whole print bed.
en_GB locale when switching to English from the user interface,
while often Linux users have just en_US locales configured.
With this commit the user will have to select English (U.S.) or
English (U.K.). Usually English (U.S.) will work.
Vojtech is scared to touch the code for the other platforms (Windows and Mac)
as the language switching has been reworked multiple times and it is quite
fragile.
processed as a hotkey prefix and not displayed at all).
Solves visualization of the new profile names containing ampersands
(Original Prusa Mini & Mini+)
Also the text was not correcly converted from UTF8.
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
1) New algorithm for connecting along the perimeters is now applied
to Honeycomb, Hilbert and similar planar filling curves.
2) The old expensive path chaining is not applied if the new algorithm
to connect along the perimeter lines is called afterwards.
1) More accurate trimming of an anchor with another infill line
or by another anchor line.
2) Trimming of very short infill lines, which are not anchored,
by another infill lines.
1) Shortening the anchor lines when touching another infill line
to avoid over extrusion.
2) Reduction of the Intersection structure complexity by referencing
the source lines.
1) Merging of collinear infill lines separated by a thin gap created
by trimming with the boundary polygon.
2) Sorting of the T-joints separately to the left / right of the common
line.
3) Trimming self intersections of the anchor lines.
4) Dropping of very short segments, not anchoring short segments.
limited anchors, while before a full perimeter segment was always
taken if possible.
2) Adapted the line infills (grid, stars, triangles, cubic) to 1).
This also solves a long standing issue of these infills producing
anchors for each sweep direction independently, thus possibly
overlapping and overextruding, which was quite detrimental
in narrow areas.
3) Refactored cubic adaptive infill anchroing algorithm
for performance and clarity.
Tighter parsing of PrusaSlicer's own G-code annotations
to avoid clashes with comments inside user G-codes.
Also the GCodeReader was extended to return string_views instead
of copying a substring, and the GCodeProcessor was partially adapted
to string_views.
with the following refactorings:
1) Removed the "printhost_slug" config from the Printer config
and from all the Printer config related spots.
2) "printhost_slug" renamed to "printhost_port". Slug sounds nasty.
3) Improved error reporting of RepetierHost class.
4) Refactored for the new "Physical Printers"
Following refactorings were done independently of the Repetier pull request:
1) Removed PrintHost static print config.
2) Clean-up after conversion of print host configuration
from Printer config to Physical Printer config.
3) Fixed some issues, where the Printer config was still queried for
host configuration. Vojtech believes that this should not happen
after the host configuration is converted to physical printers.
Vojtech still feels that more refactoring is needed in regard to porting
the host configuration from Printer profile to the new Physical Printer
profile.
physical_printers.
Updated the snapshots dialog to display sla_print and sla_material.
Updated the snapshots dialog to display physical_printer instead of
printer if the physical_printer key is nonempty.
The "physical_printer" key was moved from [extras] to [presets] section
of PrusaSlicer.ini
These new API functions are not available on Windows 7 and on older Windows 10,
thus they are newly loaded dynamically and the functions using it retur
a bool indicating whether the functionality is supported or not.
Also the OSX variants that are not supported newly return false instead
of throwing an exception.
Fixes#4972#4974
Use https in config update URLs
http://files.prusa3d.com/* always redirects to HTTPS so use https scheme
directly.
The pull request broke updates to those who installed configs with
http://, not https:// prefix.
Ironing flag ignored on infill rotate #4937
Ironing does not take effect when you change Top Fill Pattern. #4900
Ironing layer not shown in preview when settings are changed #4510
Implemented try/catch blocks for Slic3r exceptions and std::exceptions
with GUI error reporting. This is extremely important to report
corruption of PrusaSlicer.ini.
The following threads are named with this commit:
slic3r_main, slic3r_BackgroundSlicingProcess,
slic3r_tbbpool_xx_yy where xx is a one based index of the TTB thread
and yy is the platform thread ID.
Vojtech Bubnik